Untersuchungen zu Bismutseltenerdoxidhalogeniden der Zusammensetzung Bi2SEO4X (X = Cl,Br, I)

Investigations on the Bismuth Rare‐Earth Oxyhalides Bi₂REO₄X (X = Cl, Br, I) Compounds of the composition of Bi₂REO₄X (RE = Y, La–Lu; X = Cl, Br, I) have been prepared by solid state reaction of stoichiometric mixtures of BiOX, Bi₂O₃, and RE₂O₃. They were characterized by X‐ray powder diffraction, IR spectroscopy, mass spectrometry and DTA/TG measurements as well. The crystal structure (tetragonal, P4/mmm, a ≈ 3.9 Å, c ≈ 9 Å) was determined by the Rietveld method. In the structure [M₃O₄]⁺ layers are interleaved by single halogen layers. Rare‐earth and bismuth atoms in Bi₂REO₄X are 8‐coordinated. The structure can be derived from the LiBi₃O₄Cl₂ type structure. The enthalpies of formation are derived from heats of solution. The standard entropies were calculated from low‐temperature measurements of the specific heat capacities.     

Crystal Structures of the Phosphorus‐Boron Adducts n‐Pr3P · BBr3 and I3P · BBr3

The structures of the phosphorus‐boron adducts n‐Pr₃P · BBr₃ (trigonal, space group P 4 c1, Z = 4, a = 11.5423(6), b = 11.5423(6) and c = 13.8066(7) Å) and I₃P · BBr₃ (orthorhombic, space group Pnma, Z = 4, a = 12.761(2), b = 11.427(1), c = 7.3728(7) Å) were determined by X‐ray crystallography. The P–B distance of 2.01(1) Å in I₃P · BBr₃ is significantly longer than the P–B bond in n‐Pr₃P · BBr₃ (1.95(1) Å). The different Lewis basicity of phosphorus halides, PX₃ (X = Cl, Br, I), and alkylphosphines is discussed. The charge transfer and the bond situation in these donor‐acceptor complexes is studied on the basis of NBO analysis. Selected frequencies of n‐Pr₃P · BBr₃ obtained by Raman and infrared spectroscopy are assigned and compared with the normal modes of I₃P · BBr₃.     

Insertion Reactions of 1,2‐Disubstituted Olefins with an α‐Diimine Palladium(II) Complex

The migratory insertions of cis or trans olefins CH(X)?CH(Me) (X = Ph, Br, or Et) into the metal–acyl bond of the complex [Pd(Me)(CO)(ⁱPr₂dab)]⁺ [B{3,5‐(CF₃)₂C₆H₃}₄]^? ( 1 ) (ⁱPr₂dab = 1,4‐diisopropyl‐1,4‐diazabuta‐1,3‐diene = N,N′‐(ethane‐1,2‐diylidene)bis[1‐methylethanamine]) are described (Scheme 1). The resulting five‐membered palladacycles were characterized by NMR spectroscopy and X‐ray analysis. Experimental data reveal some important aspects concerning the regio‐ and stereochemistry of the insertion process. In particular, the presence of a Ph or Br substituent at the alkene leads to the formation of highly regiospecific products. Moreover, in all cases, the geometry of the substituents in the formed palladacycle was the same as in the starting olefin, as a consequence of a cis addition of the Pd–acyl fragment to the C?C bond. Reaction with CO and MeOH of the five‐membered complex derived from trans‐β‐methylstyrene (= [(1E)‐prop‐1‐enyl]benzene) insertion, yielded the 2,3‐substituted γ‐keto ester 9 with an (2RS,3SR)‐configuration (Scheme 3).     

Die Tetracyanoborate M[B(CN)4], M = [Bu4N]+, Ag+, K+

The Tetracyanoborates M[B(CN)₄], M = [Bu₄N]⁺, Ag⁺, K⁺ The tetracyanoborate anion is prepared for the first time as the tetrabutylammonium salt by the reaction of [NBu₄]BX and BX₃ (X = Br, Cl) in toluene with KCN. After purification and recrystallization of the product from CHCl₃ colorless and needle size single crystals of [Bu₄N][B(CN)₄] are formed. After metathesis with AgNO₃ the silver salt and subsequently with KBr the potassium salt is prepared. The three salts are characterized by single crystal X‐ray diffraction (Ag[B(CN)₄] P 43m, a = 5.732(1) Å, V = 188.3 ų, Z = 1, R₁ = 0.75%; K[B(CN)₄] I4₁/a, a = 6.976(1), c = 14.210(3) Å, V = 691.5 ų, Z = 4, R₁ = 1.90%; [Bu₄N][B(CN)₄] Pnna, a = 17.765(3), b = 11.650(2), c = 11.454(2) Å, V = 2370.5 ų, Z = 4, R₁ = 6.09%) and by NMR‐, IR‐, Raman‐ as well by UV‐spectroscopy.     

Uber die Reaktionen der Hexacarbonyle der VI. Nebengruppe mit Zinn (II)- und Germanium (II)-halogeniden

On Reactions of Subgroup. VI. Hexacarbonyls with Tin(II) and Germanium (II) Halides The neutral complexes M(CO)₅SnX₂ and M(CO)₅GeCl₂ (M = Cr, Mo, W; X = Cl, Br, J) have been prepared by a photochemical reaction between M(CO)₆ and SnX₂, or CsGeCl₃ in THF. The reaction of these compounds with [N(CH₃)₄]X (X = Cl, Br, J) in THF was found to lead to a series of anions [M(CO)₅SnX₃]^? or [M(CO)₅GeCl₃]^? (M = Cr, Mo, W; X = Cl, Br, J), some of which have previously been prepared. The physical properties and IR-spectra of the above compounds are discussed.     

Phenylimidorhenium(V) Complexes with 1,3‐Diethyl‐4,5‐dimethylimidazole‐2‐ ylidene Ligands

The phenylimidorhenium(V) complexes [Re(NPh)X₃(PPh₃)₂] (X = Cl, Br) react with the N‐heterocyclic carbene (NHC) 1,3‐diethyl‐4,5‐dimethylimidazole‐2‐ylidene (L^Et) under formation of the stable rhenium(V) complex cations [Re(NPh)X(L^Et)₄]²⁺ (X = Cl, Br), which can be isolated as their chloride or [PF₆]^? salts. The compounds are remarkably stable against air, moisture and ligand exchange. The hydroxo species [Re(NPh)(OH)(L^Et)₄]²⁺ is formed when moist solvents are used during the synthesis. The rhenium atoms in all three complexes are coordinated in a distorted octahedral fashion with the four NHC ligands in equatorial planes of the molecules. The Re–C(carbene) bond lengths between 2.171(8) and 2.221(3) Å indicate mainly σ‐bonding between the NHC ligand and the electron deficient d² metal atoms. Attempts to prepare analogous phenylimido complexes from [Re(NPh)Cl₃(PPh₃)₂] and 1,3‐diisopropyl‐4,5‐dimethylimidazole‐2‐ylidene (L^i?Pr) led to a cleavage of the rhenium‐nitrogen multiple bond and the formation of the dioxo complex [ReO₂(L^i?Pr)₄]⁺.     

Darstellung,Kristallstrukturen und Schwingungsspektren von trans‐[Pt(N3)4X2]2–, X = Cl,Br, I

Synthesis, Crystal Structures, and Vibrational Spectra of trans ‐[Pt(N₃)₄X₂]^2–, X = Cl, Br, I By oxidative addition to (n‐Bu₄N)₂[Pt(N₃)₄] with the elemental halogens in dichloromethane trans‐(n‐Bu₄N)₂[Pt(N₃)₄X₂], X = Cl, Br, I are formed. X‐ray structure determinations on single crystals of trans‐(Ph₄P)₂[Pt(N₃)₄Cl₂] (triclinic, space group P1, a = 10.352(1), b = 10.438(2), c = 11.890(2) Å, α = 91.808(12), β = 100.676(12), γ = 113.980(10)°, Z = 1), trans‐(Ph₄P)₂[Pt(N₃)₄Br₂] (triclinic, space group P1, a = 10.336(1), b = 10.536(1), c = 12.119(2) Å, α = 91.762(12), β = 101.135(12), γ = 112.867(10)°, Z = 1) and trans‐(Ph₄P)₂[Pt(N₃)₄I₂] (triclinic, space group P1, a = 10.186(2), b = 10.506(2), c = 12.219(2) Å, α = 91.847(16), β = 101.385(14), γ = 111.965(18)°, Z = 1) reveal, that the compounds crystallize isotypically with octahedral centrosymmetric complex anions. The bond lengths are Pt–Cl = 2.324, Pt–Br = 2.472, Pt–I = 2.619 and Pt–N = 2.052–2.122 Å. The approximate linear Azidoligands with N^α–N^β–N^γ‐angles = 172.1–176.8° are bonded with Pt–N^α–N^β‐angles = 116.2–121.9°. In the vibrational spectra the platinum halogen stretching vibrations of trans‐(n‐Bu₄N)₂[Pt(N₃)₄X₂] are observed in the range of 327–337 (X = Cl), at 202 (Br) and in the range of 145–165 cm^–1 (I), respectively. The platinum azide stretching modes of the three complex salts are in the range of 401–421 cm^–1. Based on the molecular parameters of the X‐ray determinations the IR and Raman spectra are assigned by normal coordinate analysis. The valence force constants are f_d(PtCl) = 1.90, f_d(PtBr) = 1.64, f_d(PtI) = 1.22, f_d(PtN^α) = 2.20–2.27 and f_d(N^αN^β, N^βN^γ) = 12.44 mdyn/Å.     

Ge=B π‐Bonding: Synthesis and Reversible [2+2] Cycloaddition of Germaborenes

Phosphine‐stabilized germaborenes featuring an unprecedented Ge=B double bond with short B???Ge contacts of 1.886(2) ( 4 ) and 1.895(3) Å ( 5 ) were synthesized starting from an intramolecular germylene–phosphine Lewis pair ( 1 ). After oxidative addition of boron trihalides BX₃ (X=Cl, Br), the addition products were reduced with magnesium and catalytic amounts of anthracene to give the borylene derivatives in yields of 78 % ( 4 ) and 57 % ( 5 ). These halide‐substituted germaborenes were characterized by single‐crystal structure analysis, and the electronic structures were studied by quantum‐chemical calculations. According to an NBO NRT analysis, the dominating Lewis structure contains a Ge=B double bond. The germaborenes undergo a reversible, photochemically initiated [2+2] cycloaddition with the phenyl moiety of a terphenyl substituent at room temperature, forming a complex heterocyclic structure with Ge^IV in a strongly distorted coordination environment.     

Organometallated Halonium Salts of the Type [{Cp(CO)2Fe}2X]SbY6 (X = Cl,Br, I; Y = F,Cl)

The reaction of CpFe(CO)₂X (X = Cl, Br, I) with SbY₅ (Y = F, Cl) in toluene leads to the cationic, halogen‐bridged compounds [{Cp(CO)₂Fe}₂X]SbY₆ ( 1 – 6 ). The halide of CpFe(CO)₂X is eliminated by the Lewis acid SbY₅, and the fragment “CpFe(CO)₂⁺” reacts with further CpFe(CO)₂X to form the halogen bridge between both the organometallic substituents. The exclusive formation of the counter anion SbY₆^– is caused by the oxidizing action of the antimony pentahalides, by which SbY₃ and the interhalogens XY are always obtained. The compounds have been characterized by their NMR‐, IR‐ and Mass spectra, the compounds 1 – 3 and 6 additionally by single crystal structure analyses. They show decreasing bond angles Fe–X–Fe following the range Cl → Br → I and the VSEPR concept; the two CpFe(CO)₂ groups are staggered with the dihedral angle Cp(centre)–Fe–Fe–Cp(centre) of about 160°.     

Synthesis and Crystal Structures of Cs5Nb2S4X9 – Double Salts Containing New Cluster Anions [Nb2(μ-S2)2X8]4– (X = Cl,Br)

Bis(disulfide)bridged Nb(+4) cluster halide complexes [Nb₂S₄X₈]^4– (X = Cl, Br) were prepared by acid hydrolysis of [Nb₂S₄(NCS)₈]^4– in concentrated aqueous HCl or HBr, solution from which they can be isolated as double salts Cs₅[Nb₂S₄X₈]X (X = Cl, 1 ; X = Br, 2 ). The crystal structures of 1 and 2 were determined. The isolation and X-ray structure of oxonium salt (H₃O)₅ [Nb₂S₄Cl₈]Cl ( 3 ) is also reported. 1 – 3 contain new [Nb₂S₄X₈]^4– anions which can also be viewed as excised building blocks of polymeric solids NbS₂X₂. The extra halogen resides in the center of octahedron formed by six Cs⁺ or H₃O⁺ ions. All the three salts are isostructural and crystallize in tetragonal space group Immm with the following parameters: a = 10.269(2), b = 16.343(2), c = 7.220(1) Å for 1 , a = 10.934(1), b = 16.613(2), c = 7.470(1) Å for 2 , a = 9.639(1), b = 16.031(1), c = 7.071(1) Å for 3 . The parameters of the Nb₂S₄ core are only slightly affected by the change from Cl to Br.     

Reactions of Chalcogen Oxide Chlorides EOCl2 (E = S,Se) with Group 5 Metal Chlorides

The tantalum derivative TaCl₅(SOCl₂), thermally unstable above 290 K, was prepared from Ta₂Cl₁₀ and SOCl₂ and studied by X‐ray crystallography at 180 K. Tantalum atom is octahedrally coordinated by five chlorides at Ta–Cl distances comprised between 2.32 and 2.36 Å and by the oxygen atom of SOCl₂ at the Ta–O distance of 2.34 Å. No evidence for the existence of an analogous compound of niobium(V) has been obtained. The halides of Group 5, M₂Cl₁₀, M = Nb, Ta, react with SeOCl₂ to give the solid adducts MCl₅(SeOCl₂) stable at room temperature. The reaction of NbCl₅(SeOCl₂) with SOCl₂ affords [SeCl₃][NbCl₆] which contains trigonal‐pyramidal (SeCl₃)⁺ cations with Se–Cl distances of 2.13–2.16 Å and octahedral [NbCl₆]^– anions (Nb–Cl: 2.27–2.45 Å). A distorted octahedral coordination around the selenium atom is achieved by additional interactions [Se…Cl, 2.81–2.98 Å] between selenium and the [NbCl₆]^– anion.     

Zur Strukturchemie der Alkyl- und Arylhalogenoarsenate(III), [Me2As2Cl5]–, [RAsCl3]–, [R2As2Br6]2– (R = Me,Et, Ph) und [Ph2AsX2]– (X = Cl,Br)

Structural Chemistry of the Alkyl- and Arylhaloarsenates(III) [Me₂As₂Cl₅]^–, [RAsCl₃]^–, [R₂As₂Br₆]^2– (R = Me, Et, Ph) and [Ph₂AsX₂]^– (X = Cl, Br) The alkyl- and arylhaloarsenates(III) [Ph₄P][Me₂As₂Cl₅] ( 1 ), [Ph₄P][RAsCl₃] (R = Me, Et, Ph, 2 – 4 ), [Me₃PhN][PhAsCl₃] ( 5 ), [Ph₄P]₂[R₂As₂Br₆] (R = Me, Et, Ph, 6 – 8 ), [n-Pr₄N][Ph₂AsCl₂] ( 9 ) and [n-Bu₄N][Ph₂AsBr₂] ( 10 ) have been prepared and their structures established by X-ray diffraction. In contrast to the chloroarsenates(III) 2 – 5 , which all contain isolated ψ-trigonal bipyramidal anions [RAsCl₃]^–, the analogous bromoarsenates(III) 6 – 8 exhibit dimeric structures. Whereas the trans sited As–Cl distances in 2 and 3 are very similar a pronounced degree of asymmetry is apparent for the Cl–As–Cl three-centre bonds in 4 and 5 [2.396(1) and 2.602(1) Å in 5]. In 6 and 7 C_i symmetry related RAsBr₂ units are connected through long As…Br bonds [2.926(1) and 3.116(2) Å in 6 ]. The bromophenylarsenate(III) anion of 8 which contains two effectively undistorted ψ-trigonal bipyramids [PhAsBr₃]^– associated by weak As…Br interactions [3.117(2) Å]. In view of its very long bridging As…Cl distances the [Me₂As₂Cl₅]^– anion in 1 can, as 6 an 7 , be regarded as two MeAsCl₂ molecules weakly linked through a chloride ion.     

Synthesen von Verbindungen mit M–N‐Bindungen (M = Li,Ga, In)

Syntheses of Compounds with M–N Bonds (M = Li, Ga, In) The adducts [GaCl₃(HNⁱPr₂)] ( 1 ) and [InCl₃{HN(CH₂Ph)₂}₂] ( 2 ) can be obtained by the reactions of the corresponding metal(III) halides with the amines. The In amide In(N^cHex₂)₃ ( 3 ) can be formed by treatment of InCl₃ with three equivalents of LiN^cHex₂. Reaction with four equivalents of LiN^cHex₂ leads to the same product. However, the treatment of InCl₃ with four equivalents of LiN(CH₂Ph)₂ gives the desired metalate [Li(THF)₄][In{N(CH₂Ph)₂}₄] ( 4 ). From the corresponding reaction of InCl₃ with LiNⁱPr₂ no In‐containing product could be identified. Instead, the aggregate of LiCl with three units of LiNⁱPr₂, [Li₄(NⁱPr₂)₃(THF)₄Cl] ( 5 ), was isolated. 1 – 4 were characterized by NMR, IR and MS techniques as well as by X‐ray structure determinations. According to them, 1 possesses a tetrahedrally coordinated Ga atom, at which two units of 1 are connected by hydrogen bridges to centrosymmetrical dimers. The In atoms in 2 have a trigonal‐bipyramidal coordination sphere; the amine molecules occupy the apical positions. The central metal atom in 3 and the anion of 4 exhibit trigonal‐planar and distorted tetrahedral environments, respectively. The novel structural motif in 5 is the Cl^– ion, only partly surrounded by Li⁺ ions in a strongly distorted trigonal‐bipyramidal fashion. The dominating angle amounts to 165.2(2)°.     

Zur Reaktion der Alkin‐Kupfer(I)‐Komplexe [CuX(S‐Alkin)] (X = Cl,Br, I; S‐Alkin = 3,3,6,6‐Tetramethyl‐1‐thia‐4‐cycloheptin) mit den Phosphanen PMe3 und Ph2PCH2CH2PPh2 (dppe)

Organometallic Compounds of Copper. XVIII. On the Reaction of the Alkyne Copper(I) Complexes [CuX(S‐Alkyne)] (X = Cl, Br, I; S‐Alkyne = 3,3,6,6‐Tetramethyl‐1‐thiacyclohept‐4‐yne) with the Phosphanes PMe₃ and Ph₂PCH₂CH₂PPh₂ (dppe) The alkyne copper(I) halide complexes [CuX(S‐Alkyne)]_n ( 2 ) ( 2 a : X = Cl, 2 b : X = Br, 2 c : X = I; S‐Alkyne = 3,3,6,6‐tetramethyl‐1‐thiacyclohept‐4‐yne; n = 2, ∞) add the phosphanes PMe₃ and Ph₂PCH₂CH₂PPh₂ (dppe) to form the mono‐ and dinuclear copper compounds [(S‐Alkyne)CuX(PMe₃)] ( 6 ) ( 6 a : X = Cl, 6 b : X = Br) and [(S‐Alkyne)CuX(μ‐dppe)CuX(S‐Alkyne)] ( 7 a : X = Cl, 7 b : X = Br, 7 c : X = I), respectively. By‐product in the reaction of 2 a with dppe is the tetranuclear complex [(S‐Alkyne)Cu(μ‐X)₂Cu(μ‐dppe)₂Cu(μ‐X)₂Cu(S‐Alkyne)] ( 8 ). In case of the compounds 7 prolonged reaction times yield the alkyne‐free dinuclear copper complexes [Cu₂X₂(dppe)₃] ( 9 ) ( 9 a : X = Cl, 9 b : X = Br, 9 c : X = I)). X‐ray diffraction studies were carried out with the new compounds 6 a , 6 b , 7 b , 8 , and 9 c .     

Stabilisierung von M+‐Ionen (M = In,Tl) durch Dibenzyldichlorogallat

Stabilization of M⁺ Ions (M = In, Tl) by Dibenzyldichlorogallate MCl reacts with (PhCH₂)₂GaCl to give M[(PhCH₂)₂GaCl₂] [M = In ( 1 ), Tl ( 2 )]. 1 and 2 were characterized by NMR, IR and MS techniques. In addition, an X‐ray structure determination of 1 was performed. According to this, 1 consists of four‐membered In₂Cl₂ rings connected by weak In…Cl contacts (344 pm) along [010] to a coordination polymer. The In⁺ ion is coordinated by four In–Cl and two In‐aryl interactions.     

Synthese und Molekülstruktur von [{Cp′(μ‐η1 : η5‐C5H3Me)Mo(μ‐AlRH)}2] (Cp′ = C5H4Me,R = iBu,Et)

Synthesis and Molecular Structure of [{Cp′(μ‐η¹ : η⁵‐C₅H₃Me)Mo(μ‐AlRH)}₂] (Cp′ = C₅H₄Me, R = ⁱBu, Et) [Cp′₂MoH₂] reacts with HAlR₂ to give [{Cp′(μ‐η¹ : η⁵‐C₅H₃Me)Mo(μ‐AlRH)}₂] (Cp′ = C₅H₄Me, R = ⁱBu ( 1 ), Et ( 2 )). Crystal structure determinations were carried out on [Cp′₂MoH₂] and 1 . 1 exhibits a direct Mo–Al bond (2.636(2) Å).     

Syntheses and Structures of Two Selenite Chloride Hydrates: Co(HSeO3)Cl · 3 H2O and Cu(HSeO3)Cl · 2 H2O

The first selenite chloride hydrates, Co(HSeO₃)Cl · 3 H₂O and Cu(HSeO₃)Cl · 2 H₂O, have been prepared from solution and characterised by single‐crystal X‐ray diffraction. The cobalt phase adopts an unusual “one‐dimensional” structure built up from vertex‐sharing pyramidal [HSeO₃]^2–, and octahedral [CoO₂(H₂O)₄]^2– and [CoO₂(H₂O)₂Cl₂]^4– units. Inter‐chain bonding is by way of hydrogen bonds or van der Waals' interactions. The atomic arrangement of the copper phase involves [HSeO₃]^2– pyramids and Jahn‐Teller distorted [CuCl₂(H₂O)₄] and [CuO₄Cl₂]^8– octahedra, sharing vertices by way of Cu–O–Se and Cu–Cl–Cu bonds. Crystal data: Co(HSeO₃)Cl · 3 H₂O, M_r = 276.40, triclinic, space group P 1 (No. 2), a = 7.1657(5) Å, b = 7.3714(5) Å, c = 7.7064(5) Å, α = 64.934(1)°, β = 68.894(1)°, γ = 71.795(1)°, V = 337.78(7) ų, Z = 2, R(F) = 0.036, wR(F) = 0.049. Cu(HSeO₃)Cl · 2 H₂O, M_r = 263.00, orthorhombic, space group Pnma (No. 62), a = 9.1488(3) Å, b = 17.8351(7) Å, c = 7.2293(3) Å, V = 1179.6(2) ų, Z = 8, R(F) = 0.021, wR(F) = 0.024.     

Synthesis and Structure of the Tetrameric [Cp*V(μ‐F)2]4 (Cp* = C5Me5); Preparation of the Imido Molybdenum Fluoride [(2,6‐i‐Pr2C6H3N)2MoF2] · THF and the Structural Investigation of [(2,6‐i‐Pr2C6H3N)6Mo4(μ3‐F)2Me2(μ‐O)4]

Treating [Cp*V(μ‐Cl)₂]₃ (Cp* = C₅Me₅) and [(2,6‐i‐Pr₂C₆H₃N)₂MoMe₂], respectively, with Me₃SnF afforded the title compounds [Cp*V(μ‐F)₂]₄ ( 1 ) and [(2,6‐i‐Pr₂C₆H₃N)₂MoF₂] · THF ( 2 ). 1 has a tetrameric structure, in which four V atoms can be regarded as being arranged at the vertices of a distorted tetrahedron, with four long edges bridged by one F atom and each of the other two short edges bridged by two F atoms with a mean V–F bond length of 2.00 Å. A hydrolyzed product of 2 , [(2,6‐i‐Pr₂C₆H₃N)₆Mo₄(μ₃‐F)₂Me₂(μ‐O)₄] ( 3 ) was characterized by elemental analyses and X‐ray single crystal study. The X‐ray diffraction analysis reveals that 3 has a unique tetranuclear structure, containing two five and two six coordinated Mo atoms connecting each other by four μ‐O and two μ₃‐F atoms. The geometries around the two Mo atoms can be described having distorted trigonal bipyramidal and distorted octahedral coordination spheres, respectively. The Mo–(μ‐O) bond lengths are 1.813 Å (average) for five coordinated Mo atoms and 2.030 Å (average) for those of six coordinated, respectively, indicating an additional π bonding between five coordinated Mo atoms and the μ‐O atoms. The Mo–(μ₃‐F) distances range from 2.291 to 2.352 Å.     

Chloro­(3,6,13,16‐tetraethyl‐2,7,12,17‐tetra­methyl­porphycenato‐κ4N)iron(III) chloro­form solvate

The X‐ray crystallographic analysis of the title complex, chloro­[3,10,13,20‐tetraethyl‐4,9,14,19‐tetra­methyl­penta­cyclo[16.2.1.1^2,5.1^8,11.1^12,15]­tetracosa‐2,4,6,8(23),9,12,14,16,18(21),19‐decaene]­iron(III) chloro­form solvate, [Fe(C₃₃H₃₇N₄)Cl]·CHCl₃, reveals a twisted macrocyclic framework with a slightly distorted rectangular pyramidal core, where the deviation of the central Fe^III atom from the least‐squares plane of the C₂₀N₄ core is 0.594 (1) Å. Some important bond distances are as follows: Fe—N 2.019 (3), 2.026 (3), 2.028 (3) and 2.034 (3) Å; Fe—Cl 2.232 (1) Å.     

Mononuclear Carbene Dithiolate [Ni(NHX)(′S2C ′)] Complexes with HNX = HNPiPr3 or HNSPh2 Coligands (′S2C ′ 2– = 1,3‐ImidazolidinylN,N′‐bis(2‐benzenethiolate)(2–))

Cleavage reactions of the dinuclear [{Ni(′S₂C ′)}₂] · DMF (′S₂C ′ ^2– = 1,3‐imidazolidinyl‐N,N′‐bis(2‐benzenethiolate)(2–)) with HNPiPr₃ or HNSPh₂ yielded the mononuclear complexes [Ni(NHPiPr₃)(′S₂C ′)] ( 1 ) and [Ni(NHSPh₂)(′S₂C ′)] ( 2 ) which have been completely characterized. The nickel‐carbene‐dithiolate [Ni(′S₂C ′)] moiety is one of the very rare complex fragments that are able to coordinate both HNPR₃ or HNSR₂. IR spectra and X‐ray structure determinations show that 1 and 2 exhibit intramolecular N–H…S(thiolate) hydrogen bonds. Geometric parameters and NMR spectroscopic data of 1 and 2 are compatible with N–X single bonds and ylidic structures of the HNPiPr₃ and HNSPh₂ ligands. Comparison of Ni–N distances in diamagnetic and paramagnetic [Ni(NHSPh₂)] complexes was rendered possible through the X‐ray structure determination of the homoleptic [Ni(NHSPh₂)₆]Cl₂ ( 3 ) which formed as minor by‐product in the synthesis of 2 .