Comparison of a portable micro-X-ray fluorescence spectrometry with inductively coupled plasma atomic emission spectrometry for the ancient ceramics analysis

Two multielement instrumental methods of analysis, micro X-ray fluorescence spectrometry (micro-XRF) and inductively coupled plasma atomic emission spectrometry (ICP-AES) were applied for the analysis of 7th and 5th century B.C. ancient ceramic sherds in order to evaluate the above two methods and to assess the potential to use the current compact and portable micro-XRF instrument for the in situ analysis of ancient ceramics. The distinguishing factor of interest is that micro-XRF spectrometry offers the possibility of a nondestructive analysis, an aspect of primary importance in the compositional analysis of cultural objects. Micro-XRF measurements were performed firstly directly on the ceramic sherds with no special pretreatment apart from surface cleaning (micro-XRF on sherds) and secondly on pressed pellet disks which were prepared for each ceramic sherd (micro-XRF on pellet). For the ICP-AES determination of elements, test solutions were prepared by the application of a microwave-assisted decomposition procedure in closed high-pressure PFA vessels. Also, the standard reference material SARM 69 was used for the efficiency calibration of the micro-XRF instrument and was analysed by both methods. In order to verify the calibration, the standard reference materials NCS DC 73332 and SRM620 as well as the reference materials AWI-1 and PRI-1 were analysed by micro-XRF. Elemental concentrations determined by the three analytical procedures (ICP-AES, micro-XRF on sherds and micro-XRF on pellets) were statistically treated by correlation analysis and Student's t-test (at the 95% confidence level).     

Comparison of atomic fluorescence and atomic emission spatial distribution profiles in the inductively coupled plasma

Extensive maps of fluorescence from calcium neutral atoms and ions have been measured. These measurements have been made using a readily available commercial torch (MAK Torch, Sherritt Research Centre, Fort Saskatchewan, Alberta, Canada) which has rigidly controlled dimension specifications in order to facilitate interlaboratory comparisons. The measurements were made for ground state Ca atoms and ions (15 point radial profiles) for each of five heights (10,13,19,25 and 31 mm above the load coil), four powers (0.75,1.0,1.25 and 1.5 kW) and three carrier gas flow rates (1,0.85 and 0.65 l/min). In addition complete lateral emission profiles of these same species have also been measured over the same range of conditions. The Ca atomic fluorescence and emission results are compared and as well the fluorescence results for the Sr ion are compared with ICP-mass spectrometric results. Finally, atomic fluorescence and emission results are presented for the Mo atom; these are contrasted with those for the Ca atom and preliminary results for the resonance fluorescence of excited state calcium ion are also presented.     

Multielement analysis of environmental samples by total-reflection X-ray fluorescence spectrometry, neutron activation analysis and inductively coupled plasma optical emission spectroscopy

Summary In environmental research and protection trace elements have to be determined over a wide range of atomic number, down to very low concentrations, and in quite different matrices. This challenge requires the availability of complementary analytical methods characterized by a high detection power and few sources of systematic errors. Besides, the capacity of multielement detection is often desired since it facilitates the tackling of many problems in which numerous trace elements are of direct concern. Total reflection X-ray fluorescence, neutron activation analysis and inductively coupled plasma optical emission spectroscopy, in principle, fulfill these requirements quite well. However, each method has its domain, and the application to certain sample species may be less promising. Under this aspect, the paper summarizes some recent developments and investigations, including intercomparisons as far as possible. Various matrices are considered: rainwater and airborne particulates, soil samples, river sediments and suspended particulate matter, river water filtrates, ovean water, and organic matrices. Capabilities and limitations are discussed. Sample preparation techniques are described if they are new or essential for achieving the results given.

---

Multielementanalyse von Umweltproben mit Totalreflexions-Röntgenfluorescenzspektrometrie, Neutronenaktivierungsanalyse und ICP-Emissionsspektroskopie

Zusammenfassung Umweltforschung und Umweltschutz erfordern die Bestimmung von Spurenelementen über einen weiten Bereich der Ordnungszahl, z. T. bis in den extremen Spurenbereich und in ganz unterschiedlichen Matrices. Die Erfüllung dieser Aufgabe setzt die Verfügbarkeit einander ergänzender analytischer Verfahren voraus, die durch eine hohe Nachweisstärke und geringe systematische Fehler gekennzeichnet sein müssen. Hinzu kommt, daß vielfach Multielement-Eigenschaften wünschenswert sind, da bei manchen Fragestellungen zahlreiche Elemente von Interesse sind. Die Totalreflexions-Röntgenfluorescenzanalyse, die Neutronenaktivierungsanalyse und die optische Emissionsspektroskopie mit induktiv angeregter Plasmafackel erfüllen grundsätzlich diese Forderungen in hohem Maße. Jedoch besitzt jede Methode ihre besonderen Stärken, und Anwendungen auf bestimmte Probenarten können weniger erfolgreich sein. Der vorliegende Beitrag faßt unter diesem Aspekt einige neuere Entwicklungen und Untersuchungen zusammen, wobei nach Möglichkeit Vergleiche der verschiedenen Verfahren angestellt werden. Dabei werden die folgenden Matrices behandelt: Niederschlag und luftgetragene Partikel, Bodenproben, Flußsedimente und Schwebstoffe, Flußwasserfiltrate, Ozeanwasser und einige organische Matrices. Die Einsatzmöglichkeiten und die Leistungsgrenzen werden diskutiert. Die Probenvorbereitungstechniken werden beschrieben, sofern sie neu sind oder eine wesentliche Voraussetzung für die Erzielung der angegebenen Ergebnisse darstellen.

     

A helium inductively coupled plasma for atomic emission spectrometry

An annular helium inductively coupled plasma (He ICP) was generated at atmospheric pressure. No external cooling was used to stabilize the plasma. Aqueous solution was injected into the plasma without any difficulty. Preliminary results revealed that the annular He ICP was capable of exciting elements such as Cl and Br which possess high excitation energies. Atomic emission detection limits for Cl and Br were improved by factors of 63 and 34, respectively, as compared to the results obtained from the argon inductively coupled plasma. The excitation temperature of the annular He ICP (4180 K) was less than that of an Ar ICP (5570 K).     

Quality of calibration in inductively coupled plasma atomic emission spectrometry

Calibration is a crucial step during the whole analytical process. A procedure is suggested to assess the quality of linear regression used for the calibration graph, based on the use of confidence limits for the concentration, as the regression coefficient is not appropriate for this purpose. This procedure has been applied to inductively coupled plasma atomic emission spectrometry. It indicates that the use of only three standards should be discouraged because of unacceptably high confidence limits for the concentration. Moreover, use of weighted regression is more adequate in performing the least squares method and provides more constant confidence limits over the concentration range used to construct the calibration graph. This procedure could be easily added to any commercially available ICP system software.     

Sulfur analysis of conifer needles by inductively coupled plasma atomic emission spectrometry

Zusammenfassung Nadelproben werden in einem Druckaufschlu\gefÄ\ mit SalpetersÄure aufgeschlossen und die erhaltenen Lösungen mittels ICP-AES auf Schwefel analysiert. Die Messung erfolgt bei 182,04 nm in einem mit Stickstoff gespülten Spektrometer. Die Ergebnisse korrelieren gut mit unabhÄngigen Bestimmungen durch Wickbold-Aufschlu\ und Ionen-Chromatographie. Das Verfahren hat den Vorteil, da\ keine Verluste des Analysenelements auftreten und da\ die Aufschlu\lösung auch für die simultane Bestimmung von Spurenmetallen mit der ICP-AES geeignet ist.     

Carbon-related matrix effects in inductively coupled plasma atomic emission spectrometry

In Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), it has been observed that the emission intensity of some atomic lines is enhanced or depressed by the presence of carbon in the matrix. The goal of this work was to investigate the origin and magnitude of the carbon-related matrix effects in ICP-AES. To this end, the influence of the carbon concentration and source (i.e. glycerol, citric acid and potassium hydrogen phthalate), the experimental conditions and sample introduction system on the aerosol characteristics and transport, plasma excitation conditions and the emission intensity of several atomic and ionic lines of a total of 15 elements has been studied. Results indicate that carbon related matrix effects do not depend on the carbon source and they become more severe when the amount of carbon loaded into the plasma increases, i.e., when using: (i) carbon concentrations higher than 5 g L^− 1; (ii) high sample uptake rates; and (iii) efficient sample introduction systems. Thus, when introducing carbon into the plasma, the emission intensity of atomic lines with excitation energies below 6 eV is depressed (up to 15%) whereas the emission intensity of atomic lines of higher excitation energies (i.e. As and Se) are enhanced (up to 30%). The emission intensity of the ionic lines is not affected by the presence of carbon. The origin of the carbon-related interferences on the emission intensity of atomic lines is related to changes in the line excitation mechanism since the carbon containing solutions show the same aerosol characteristics and transport efficiencies as the corresponding aqueous solutions. Based on the previous findings, a calibration approach for the accurate determination of Se in a Se-enriched yeast certified material (SELM-1) has been proposed.     

Bulk analysis by IR laser ablation inductively coupled plasma atomic emission spectrometry

Two laser ablation systems dedicated to bulk analysis were evaluated for steel and PVC samples, using inductively coupled plasma atomic emission spectrometry detection. These systems were characterized by the use of a Nd:YAG laser operating at 1064 nm, the absence of observation device and a large laser spot size. The 1064 nm wavelength was selected to avoid the use of frequency-multiplying optics, and to be less critical to the sampling position. Calibration graphs and limits of detection are given for both types of materials. LODs were in the range 3–120 μg/g for steel, and in the range 0.07–15 μg/g for PVC. In the case of steel samples, similar calibration graph slopes were obtained between polished and unpolished samples.     

Bulk analysis by IR laser ablation inductively coupled plasma atomic emission spectrometry

Two laser ablation systems dedicated to bulk analysis were evaluated for steel and PVC samples, using inductively coupled plasma atomic emission spectrometry detection. These systems were characterized by the use of a Nd:YAG laser operating at 1064 nm, the absence of observation device and a large laser spot size. The 1064 nm wavelength was selected to avoid the use of frequency-multiplying optics, and to be less critical to the sampling position. Calibration graphs and limits of detection are given for both types of materials. LODs were in the range 3-120 microg/g for steel, and in the range 0.07-15 microg/g for PVC. In the case of steel samples, similar calibration graph slopes were obtained between polished and unpolished samples.     

Trace characterization of high-purity molybdenum and tungsten by electrothermal atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry, inductively coupled plasma mass spectrometry and total reflection X-ray fluorescence spectrometry involving analyte—matrix separation

A technique for the separation of 42 trace elements from up to 5 g of molybdenum and tungsten matrices was developed by means of the radiotracer technique. It is based on adsorption of the analyses on the cation exchanger Dowex 50 W x 9 from a 4% H₂O₂/0.01 mol 1⁻¹ HNO₃ solution followed by their elution with 15 ml of 4 mol I⁻¹ HNO₃ in the opposite flow direction. Both matrices were removed with a separation factor > 10⁴. The separation technique was applied to the analysis of these materials by electrothermal atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry, inductively coupled plasma mass spectrometry and total reflection X-ray fluorescence spetrometry. For all the determination methods used, the limits of detection are given and compared with those of other methods. With inductively coupled plasma mass spectrometry, for 22 of the 30 assayed elements, limits of detection at the sub-ng g⁻¹ level were achieved. The results are compared with those obtained by radiochemical neutron activation analysis in this work and by glow discharge mass spectrometry, secondary ion mass spectrometry, isotope dilution mass spectrometry and by solution spectrometric methods in other laboratories.     

Determination of total dissolved phosphorus in water samples by axial inductively coupled plasma atomic emission spectrometry

A procedure was developed to determine total dissolved phosphorus in groundwater-like samples using axial ICP-AES. Severe and peculiar matrix effects (strongly positive at lower and leveling off at higher matrix concentrations) in the presence of Na and Ca were observed. To reduce these matrix effects, a double approach was utilized consisting of a so-called minimum matrix in combination with an internal standard (Ga in this case). The ‘minimum matrix’ (small amounts of K, Mg and Na) was only added to the standard solution(s) used for the calibration. The detection limit for the whole procedure was 12 μg/L using the P213 nm line. Residual matrix effects were less than 3% (P213 nm line). Received: 21 February 1997 / Revised: 5 June 1997 / Accepted: 6 June 1997     

Determination of total dissolved phosphorus in water samples by axial inductively coupled plasma atomic emission spectrometry

A procedure was developed to determine total dissolved phosphorus in groundwater-like samples using axial ICP-AES. Severe and peculiar matrix effects (strongly positive at lower and leveling off at higher matrix concentrations) in the presence of Na and Ca were observed. To reduce these matrix effects, a double approach was utilized consisting of a so-called minimum matrix in combination with an internal standard (Ga in this case). The ‘minimum matrix’ (small amounts of K, Mg and Na) was only added to the standard solution(s) used for the calibration. The detection limit for the whole procedure was 12 μg/L using the P213 nm line. Residual matrix effects were less than 3% (P213 nm line). Received: 21 February 1997 / Revised: 5 June 1997 / Accepted: 6 June 1997     

Dissolution of Al-Fe materials and analysis by inductively coupled plasma – atomic emission spectrometry

A technique was developed for the dissolution of Al-Fe materials containing difficult to dissolve Al₂O₃. The developed procedure uses HCl and HNO₃ for initial sample attack followed by digestion with a mixture of H₃PO₄ and H₂SO₄ at 200?°C. This procedure was employe to dissolve Al-Fe material samples before the determination of Al and Fe. Minor and trace elements (B, Cr, Cu, Mo, Si, Zr) were determined after dissolution in HCl and HNO₃. Results of a round robin study verified the procedure accuracy. The developed methods have the required accuracy and precision to be used as a quality control procedure for Al-Fe materials analysis.     

Dissolution of Al-Fe materials and analysis by inductively coupled plasma – atomic emission spectrometry

A technique was developed for the dissolution of Al-Fe materials containing difficult to dissolve Al₂O₃. The developed procedure uses HCl and HNO₃ for initial sample attack followed by digestion with a mixture of H₃PO₄ and H₂SO₄ at 200 °C. This procedure was employe to dissolve Al-Fe material samples before the determination of Al and Fe. Minor and trace elements (B, Cr, Cu, Mo, Si, Zr) were determined after dissolution in HCl and HNO₃. Results of a round robin study verified the procedure accuracy. The developed methods have the required accuracy and precision to be used as a quality control procedure for Al-Fe materials analysis. Received: 9 February 1998 / Revised: 1 April 1998 / Accepted: 4 April 1998     

Electrothermal vaporization in inductively coupled plasma atomic emission spectrometry for direct multielement analysis of food samples with slurry sampling

Slurry sampling followed by electrothermal vaporization (ETV) was used as sample introduction technique in inductively coupled plasma atomic emission spectrometry (ICP-AES) for the direct determination of trace elements in food samples. A polytetrafluoroethylene (PTFE) emulsion was used as a fluorinating reagent to promote vaporization and the transportation of analytes. The main factors affecting the analytical signals were investigated in detail. Under optimum operating conditions, the detection limits (DL) for this method varied from 1.8 (Cu) to 215 ng/mL (Zn), while the relative standard deviations (RSD) were in the range 2.6% (Cu)-7.2% (Zn). The proposed method was successfully applied to the direct determination of trace amounts of V, Cu, Cr, Fe, Zn, and La in rice without any chemical pretreatment. The precision was evaluated by analyzing a standard reference material (tea leaves, GBW 07605) and comparing the results from this method with results obtained by pneumatic nebulization (PN) ICP-AES after the wet-chemical decomposition of the same sample.From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 3, 2005, pp. 286–290.Original English Text Copyright © 2005 by Chen.This article was submitted by the author in English.     

Electrothermal vaporization inductively coupled plasma atomic emission spectrometry for the analysis of solid samples: contribution to instrumentation and methodology

Summary A commercially available graphite furnace was modified in order to use it as an electrothermal vaporization device for solid sample analysis with an inductively coupled plasma atomic emission spectrometer. An evaluation of two different ETV systems has been made. This paper mainly describes the different aspects which must be taken into account when coupling an ETV system to an ICP. Cu was chosen as an element easy to determine and Cd and Pb as elements with more difficulties. From the optimization it was found that the transport efficiency for Cd in solution and solid is different, whereas for Cu and Pb the efficiencies are in good agreement for both sample types. Calibration with solids and liquids was attempted for Cu. The paper gives preliminary results on the determination of Cu in solid reference materials. In some cases (e.g. Pb) a background correction based on a linear interpolation seemed not satisfactory. Detection limits and limits of determination for Cu, Cd and Pb in different solid samples are given.Presented at the 5th International Colloquium on Solid Sampling with Atomic Spectroscopy, May 18–20, 1992; Geel, Belgium. Papers edited by R. F. M. Herber, Amsterdam     

Correlation study of internal standardization in inductively coupled plasma atomic emission spectrometry

Correlation studies (calculation of the cross-correlation function and correlation coefficients) were carried out between fluctuations in the emission signals from various analyte and internal standard elements. Some statistics are presented which may help give a clearer picture of the utility of the internal standard principle. Improvements in precision brought about by the use of suitable standards are in the region of a factor of two. The use of argon emission lines as internal standards does not prove effective as an inverse correlation is observed between the emission of these lines and analyte lines.     

Enhancement effect of organic solvents in inductively coupled plasma atomic emission spectrometry

Summary The enhancement factors of various organic solvents in inductively coupled plasma atomic emission spectrometry (ICP-AES) were measured for diethyldithiocarbamate-cadmium(II) or mercury(II)-solvent systems by comparing the maximum emission intensity of an extract with that of the corresponding aqueous solution. The correlation between the enhancement factors obtained and physical parameters of the solvents were investigated. Among them, the best inverse linear relationship existed between log dielectric constant and log enhancement factor. The plot of log (boiling point x viscosity) vs. log enhancement factor also resulted in a line with a negative slope except water. Carbon tetrachloride, chlorofom and xylene, which gave much larger enhancement factors, were recommended for the use in ICP-AES.

---

Verstärkungseffekt durch organische Lösungsmittel in der ICP-AES