IR Laser‐Induced Degradation of Poly(vinyl acetate): Novel Thermal Reactions in Solid Polymers

Summary: Pulsed‐IR laser‐induced decomposition of poly(vinyl acetate) (PVAC) differs remarkably from its conventional pyrolysis, which results in the formation of acetic acid and non‐polar carbonaceous residue. In contrast, the products in the former case are (i) vinyl acetate (low energy channel), (ii) products of cleavage in the acetate group, and (iii) an ablatively deposited polar polymeric film containing roughly half of the acetoxy groups initially present.

Schematic of the different routes of poly(vinyl acetate) degradation.     

Spontaneous Birefringence in Layer‐by‐Layer Films of Chitosan and Azo Dye Sunset Yellow

Layer‐by‐layer (LBL) films consisting of layers of the azo dye Sunset Yellow alternated with chitosan display spontaneous birefringence, which is attributed to the film anisotropy imparted by the LBL method. This is unusual for azobenzene‐containing materials as they normally form films with randomly oriented molecules, presenting birefringence only due to photoinduced isomerization cycles. Spontaneous birefringence does not appear in cast films, but occurs for LBL films obtained under various experimental conditions.

Chemical structures of (a) Sunset Yellow and (b) chitosan.     

Fluorescence “Turn‐On” Patterning With Polymers Having Pendant Triphenylmethane Groups as Fluorophore Precursors

A new methodology for creating patterned fluorescence images was developed based on acrylate polymers that have pendant triphenylmethane derivatives as precursor fluorophores. Photoinduced oxidation of the substituted nonfluorescent triphenylmethane substituents on the polymers results in the generation of fluorescent cationic species. Patterned fluorescence images were obtained when the polymer film was subjected to photomasked UV‐irradiation. The rate of formation and quality of the patterned images were found to be dependent on the nature of substituents on the methane carbon of the triphenylmethane group. Inefficient image formation takes place with the polymer derived from the H‐substituted derivative owing to the inefficient oxidation of the triphenylmethane group. In contrast, photomasked UV‐irradiation of a thin polymer film derived from the CN‐substituted triphenylmethane derivative leads to fast (1 s irradiation, 12 mW · cm⁻²) and finely resolved patterned fluorescence images.

     

Chemoenzymatic Synthesis of a Multivalent Aminoglycoside

A polymeric aminoglycoside was prepared by a facile chemoenzymatic reaction. Boc‐protected aminoglycoside, amikacin, was chemoselectively esterified with divinyl sebacate at a hydroxyl group in the C6″ position by protease from Bacillus subtilis. The resulting 3,6′,3″,4?‐tetra‐N‐Boc‐6″‐O‐vinyl sebacate was copolymerized with maltitol 6‐vinyl sebacate to yield a polymeric amikacin. The polymeric amikacin showed a modest inhibitory effect on in vitro protein synthesis, and a little antibiotic activity in minimum inhibitory concentration (MIC) assay in the presence of protease.

The synthesis of Boc‐protected amikacin ester by an enzyme‐catalyzed (protease) esterification.     

Polymerization of alkoxyallenes by transition-metal catalysts

The structure of polymers obtained by polymerization of methoxyallene and ethoxyallene with transition-metal catalysts depends on the catalyst employed. Rapid polymerization at 0°C through the unsubstituted double bond occurred with π-allylnickel halides, NiCl₂/AlEt₃ and CoCl₂/AlEt₃, yielding polymers with the structure Typical Ziegler–Natta catalysts (TiCl₄, VOCl₃ or FeCl₃ with AIEt₃) gave polymers mainly with the structure although some of the structural units were probably present as well. Polymers having conjugated double bonds were prepared with PdCl₂, [(π-allyl)PdCl]₂, and PdCl₂(C₆H₅CN)₂ as catalysts. Palladium iodide produced polymers with all three of the above structural units present. Polymerization occurred more slowly with these palladium catalysts. A preliminary examination of the effect of variation of solvent, ligand, co-catalyst, and temperature on the rate and structure of the polymers obtained with the palladium catalysts is reported.     

A Novel,One‐Pot Synthesis of Novel 3F, 5F,and 8F Aromatic Polymers

A series of novel, linear, soluble, high‐molecular‐weight, fluorinated aromatic polymers has been obtained for the first time using a superacid‐catalyzed polyhydroxyalkylation reaction of fluorinated carbonyl‐containing compounds: 1,1,1,‐trifluoroacetone ( 1 ), 2,2,2‐trifluoroacetophenone ( 2 ), 2,3,4,5,6,‐pentafluorobenzaldehyde ( 3 ), and octafluoroacetophenone ( 4 ) with aromatic hydrocarbons such as biphenyl ( a ), phenyl ether ( b ), terphenyl ( c ), and 4,4′‐diphenoxybenzophenone ( d ). These Friedel‐Crafts‐type aromatic electrophilic substitution reactions are performed at room temperature in trifluoromethane sulfonic acid or in its mixtures with dichloromethane. The polymers obtained are soluble in common organic solvents, and colorless transparent films could be cast from the solutions. ¹H and ¹³C NMR analyses of the polymers synthesized reveal their linear, highly regular structure. The polymers also possess high thermostability.

     

Phosphorus Ligands for Iron(III)‐Mediated Atom Transfer Radical Polymerization of Methyl Methacrylate

The iron(III)‐catalyzed atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was successfully employed using tributylphosphine (TBP) and trimethylphosphite (TMP) as ligands in the absence of a reducing agent. The effects of solvent and initiator on polymerization of MMA were investigated. Most of the polymerizations with these ligands were well controlled with a linear increase in the number average molecular weights ( ) versus conversion and relatively low molecular weight distribution ( = 1.2–1.4) throughout the reactions, and the measured weights matched with the predicted values. The ethyl 2‐bromoisobutyrate (EBriB) initiated ATRP of MMA with the FeBr₃/TBP or FeBr₃/TMP catalytic system was better controlled in toluene than in the other solvents used in this study at 80 °C.

     

Temperature/pH‐Sensitive Hydrogels Prepared from Pluronic Copolymers End‐Capped with Carboxylic Acid Groups via an Oligolactide Spacer

The Pluronic F127 triblock copolymer was end‐capped by carboxyl groups using a degradable oligolactide as a spacer to confer pH‐ and thermo‐sensitive properties. With increasing chain length of the oligolactide, the temperature‐dependent sol‐gel transition curve was significantly shifted to higher concentration with concomitant narrowing of the gelation temperature range. Carboxylic acid end‐capped Pluronic also exhibited a peculiar pH‐dependent sol‐gel transition behavior. At 37 °C, sharp gel‐to‐sol and sol‐to‐gel transitions were observed around pH = 4.8 and 8.2, respectively. The pH‐dependent phase transition was caused by introduction of carboxylic acid groups at the ends of Pluronic F127.

     

Control of the Dynamic Motion of a Gel Actuator Driven by the Belousov‐Zhabotinsky Reaction

A novel self‐oscillating gel actuator with gradient structure, which generates a pendulum motion by fixing one edge of the gel without external stimuli was achieved. The gel was synthesized by copolymerizing the ruthenium catalyst for the Belousov‐Zhabotinsky reaction with N‐isopropylacrylamide and 2‐acrylamido‐2‐methylpropane sulfonic acid. Furthermore, we clarified that the period and amplitude for the self‐oscillating behavior of the gel actuator are controllable by changing the composition, temperature, and size of the gel. The maximum amplitude of the novel gel actuator is about a 100 times larger than that of the conventional self‐oscillating gel system.

     

Binding and Sulfonation of Poly(acrylic acid) on Iron Oxide Nanoparticles: a Novel,Magnetic, Strong Acid Cation Nano‐Adsorbent

Summary: A novel, magnetic, strong acid cation nano‐adsorbent has been developed by the covalent binding of poly(acrylic acid) on the surface of Fe₃O₄ nanoparticles followed by sulfonation using sulfanilic acid via carbodiimide activation. The nano‐absorbent can be easily recovered or manipulated with an external magnetic field and shows a good capacity for the rapid and efficient adsorption of multivalent metal cations from aqueous solutions.

An illustration for the binding and sulfonation of PAA on Fe₃O₄ nanoparticles to produce a magnetic, strong acid cation nano‐adsorbent.     

Novel Polymer Electrolyte Membrane,Based on Pyridine Containing Poly(ether sulfone), for Application in High‐Temperature Fuel Cells

Summary: Novel poly(aryl ether sulfone) copolymers containing 2,5‐biphenylpyridine and tetramethyl biphenyl moieties were synthesized by polycondensation of 4‐fluorophenyl sulfone with 2,5‐(4′,4″ dihydroxy biphenyl)pyridine and tetramethyl biphenyl diol. Copolymers with different molecular weights and different monomer compositions were obtained. These copolymers exhibit excellent film‐forming properties, mechanical integrity, and high modulus up to 250 °C, high glass transition temperatures (above 280 °C) as well as high thermal stability up to 400 °C. In addition to the above properties required for PEMFC application, this novel material shows high oxidative stability and acid doping ability, enabling proton conductivity in the range of 10⁻² S · cm⁻¹ above 130 °C.

Synthesis of copolymers with high acid uptake and ionic conductivity.     

Modification of Polysaccharides Through Controlled/Living Radical Polymerization Grafting—Towards the Generation of High Performance Hybrids

This review covers the literature concerning the modification of polysaccharides through controlled radical polymerizations (NMP, ATRP and RAFT). The different routes to well‐defined polysaccharide‐based macromolecules (block and graft copolymers) and graft‐functionalized polysaccharide surfaces as well as the applications of these polysaccharide‐based hybrids are extensively discussed.

     

Synthesis of Highly Hydrophilic Polyaniline Nanowires and Sub‐Micro/Nanostructured Dendrites on Poly(propylene) Film Surfaces

Summary: Polyaniline (PANI) nanowires and sub‐micro/nanostructured dendrites are synthesized and immobilized on PP‐g‐PAA film surfaces via routine oxidative polymerization of aniline under different conditions, where grafting poly(acrylic acid) (PAA) served as a template and dopant, and SDS as a surfactant. The immobilized PANI enhances the surface hydrophilicity of the poly(propylene) (PP) films, and a superhydrophilic surface is obtained in this way. The mechanism of forming different morphologies of PANI and of correspondingly obtaining a superhydrophilic surface are briefly discussed.

FESEM image shows the PANI sub‐micro/nanostructured dendrites immobilized on the surfaces of PP films. The modified surface is highly hydrophilic with a water contact angle of 3°.     

Design and Synthesis of Fast‐Degrading Poly(anhydride‐esters)

Fast‐degrading, salicylate‐based poly(anhydride‐esters) were designed to degrade and release the active component, salicylic acid (SA), within 1 week. The polymer degradation was enhanced by using shorter or oxygen‐containing aliphatic chains. A copolymer of diglycolic acid was also made with a salicylate‐based diacid for comparison of polymer properties, including SA release. Both methods resulted in polyanhydrides with molecular weights ranging from 14 500 to 27 800 Da and displayed glass transition temperatures near physiological conditions, namely 33–40 °C. The homo‐ and copolymers completely degraded within one week releasing the chemically incorporated SA.

     

New Light on Old Wisdoms on Molten Polymers: Conformation,Slippage and Shear Banding in Sheared Entangled and Unentangled Melts

The flow of viscoelastic materials is usually interpreted as resulting from intramolecular properties. Typically, the non‐linear flow behaviour and sluggish relaxation dynamics in entangled polymers are interpreted by a disentanglement process. This molecular interpretation has never been validated by direct observation. We report here on in situ observations of polymer melts under steady‐state shear flow using neutron scattering and particle tracking velocimetry. It is shown that the chains remain largely undeformed under steady‐state shear flow whereas wall slippage and shear‐banding are identified in both entangled and unentangled polymer melts. These observations are of prime importance; they reveal that the flow mechanism and its viscoelastic signature reflect a collective effect and not properties of individual chains.

     

Novel Hole‐Transport Material for Efficient Polymer Light‐Emitting Diodes by Photoreaction

Summary: The photo‐crosslinking of carbazole dendrimers was analyzed by UV and IR spectroscopic methods. Photoirradiation results in the formation of a film that is insoluble in toluene and benzene. Time‐of‐flight mass spectrometry studies revealed that the photoirradiation lead to an oligomerization of the dendrimer through crosslinking. The resulting insoluble dendrimer film could be applied as a hole‐transport layer in efficient polymer electroluminescence devices (PLEDs).

Luminance‐voltage characteristics for PLEDs wherein PEDOT:PSS and CbzG3 complex with SnCl₂ were employed as the hole transport layer (ITO/HTL/EML/Ca/Ag).     

Submicron Polymer Gratings: Optical Diffraction and Spontaneous Brillouin Scattering

Summary: Brillouin light scattering (BLS) from submicron‐size patterned polyurethane (PU) films was found to display rich spectral features. Their identification allows the determination of the mechanical properties of the PU and the characterization of the periodicity and the coherence of the structure. A temperature‐dependent study demonstrates that BLS is a sensitive tool to monitor changes of the mechanical properties and/or of the morphology.

(a) Scheme of the sample structure and the scattering geometry, (b) SEM top view of the PU features.     

Biomimetic Mussel Adhesive Inspired Clickable Anchors Applied to the Functionalization of Fe3O4 Nanoparticles

The functionalization of magnetite (Fe₃O₄) nanoparticles with dopamine‐derived clickable biomimetic anchors is reported. Herein, an alkyne‐modified catechol‐derivative is employed as the anchor, as i) the catechol‐functional anchor groups possess irreversible covalent binding affinity to Fe₃O₄ nanoparticles, and ii) the alkyne terminus enables further functionalization of the nanoparticles by the grafting‐onto approach with various possibilities offered by ‘click’ chemistry. In the present work, azido‐end group functionalized Rhodamine and poly(ethylene glycol) (PEG) are utilized to coat the iron oxide nanoparticles to make them fluorescent and water soluble.