Target element dependence in the elastic and inelastic energy loss of fast heavy ions

The target atomic number dependence of elastic and inelastic stopping power has been investigated by using theoretical stopping power formulations from literature. The stopping powers for target elements with atomic numbers from 3 to 92 are calculated on the basis of the model of Montenegro et al. and the nuclear stopping power is calculated using the formulation of Wilson et al.. The target atomic number dependence of the electronic and nuclear stopping power is examined for some light and heavy projectiles by comparing the stopping powers for all considered targets. It is observed that there is a strong target atomic number oscillation for helium, nickel and silver ions in nuclear and electronic stopping as a result of varying densities of neighboring elements. We have also determined the target materials, which apply a maximum total stopping force for some incident ions.     

Simulation of channelled ion ranges in crystalline silicon

We present results from a channelled ion range simulation model based on separation of ion trajectories into three different categories known as random, channelled, and well-channelled. We present this for boron projectiles incident along the Si 〈1 0 0〉 direction. Stopping powers for channelled particles, well-channelled, and random particles are determined using experimental ratios of random and channelled stopping powers for a boron/silicon system. We have found the particle range distributions and the mean range of particles in crystalline channels. A new program code has been developed for the implementation of the presented model. The results are compared with experimental data as well as Crystal-transport and range of ions in matter, stopping and ranges of ions in matter, and projected range algorithm programs. We have found good agreement between our calculations and experiment, with an average discrepancy of 7%. Our model is also able to simulate the observed shift towards larger depths for the main ion distribution under channelling conditions.     

Quaternary ammonium ion dendrimers from methylation of poly(propylene imine)s

The poly(propylene imine) dendrimers DAB‐dendr‐(NH₂)₈, DAB‐dendr‐(NH₂)₃₂, and DAB‐dendr‐(NH₂)₆₄ were fully converted with iodomethane to quaternary ammonium ions at both chain ends and branch points and, with less iodomethane, were partially converted to quaternary ammonium ions mainly at end groups. Amidation of the primary amine ends followed by treatment with iodomethane gave the first dendrimers with quaternary ammonium ions only at branch points. After an exchange of iodide counterions for chloride, all of the quaternary ammonium ion dendrimers slightly increased the rate of decarboxylation of 6‐nitrobenzisoxazole‐3‐carboxylate ion in an aqueous solution. Similar quaternary ammonium ion dendrimers with more hydrophobic interiors or more hydrophobic chains on the ends were much more active catalysts for the decarboxylation. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 821–832, 2001     

Track overlap regime in ion-irradiated PMMA

Chemical and physical effects induced by bombardment of nearly monodisperse Poly(methyl methacrylate) (PMMA) with energetic ions (He⁺) at 200 keV have been studied. Bond scission is the main results of low fluence ion irradiation but, at high fluence there is a regime transition of PMMA from positive tone resist behavior to negative tone. The ion-induced chemical reactions in the macromolecular film give rise to gas evolution and chemical changes in the solid residue. The gas formed during the bombardment has been studied by means of a mass spectrometer, while the solid polymer has been characterized by measuring the molecular weight distribution (MWD) and the absorption coefficient in the Near Infrared (NIR), visible, and ultraviolet regions. X-ray Photoelectron Spectroscopy (XPS) has been performed to learn what happens at the surface of the polymer after bombardment. The main result of these studies is that at fluence higher than 10¹³ cm⁻² both chemical and physical effects follow a nonlinear behavior due to the transition from a single-track regime to a track overlap regime. This transition is explained in terms of progressive chemical change of the irradiated polymer from the pristine chemical structure to a new one depleted of the ester pendent groups. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 655–664, 1998     

Synthesis of poly(arylene ether ketone)s bearing skeletal crown ether units for cation exchange membranes

Poly(arylene ether ketone)s (PAEKs) are the most commonly known high‐performance materials used for ion exchange and fuel cell membranes. Described here is the design of novel sulfonated PAEKs (SPAEKs) and nonsulfonated PAEKs containing crown ether units in the main chain, which can be used in sensing applications and ion‐selective membranes. To this end, 4,4′(5′)‐di(hydroxybenzo)‐18‐crown‐6 was synthesized and used as monomer in a step growth polymerization to form crown ether‐containing PAEKs and SPAEKs. The successful synthesis of PAEKs containing 18‐crown‐6 and sulfonate groups was confirmed by gel permeation chromatography, Fourier transform infrared spectroscopy, and nuclear magnetic resonance spectroscopy. Membranes are fabricated from the sulfonated polymers. Potassium ion transport properties of the SPAEK and crown ether‐containing SPAEK membranes are assessed by diffusion dialysis. Potassium ion diffusion in the crown ether‐containing SPAEK membranes is almost four times lower than K⁺ diffusion in the native polymer membranes, without crown ether. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2786–2793     

Thermosensitive gels incorporating polythioether units for the selective extraction of class b metal ions

Novel temperature-responsive copolymers of N-isopropylacrylamide and monoaza-tetrathioether derivative, were synthesized for the selective extraction of soft metal ions such as silver(I), copper(I), gold(III) and palladium(II) ion. The ratio between N-isopropylacrylamide group and monoaza-tetrathioether group in the copolymer was determined. The ratio between N-isopropylacrylamide group and monoaza-tetrathioether group varied in the range of 66:1–187:1. Each lower critical solution temperature (LCST) of the polymer solution was determined spectrophotometrically by the relative absorbance change at 750 nm via temperature of the polymer solution. Metal ion extraction using the copolymer with appropriate counter anions such as picrate ion, nitrate or perchlorate ion was examined. Soft metal ions such as silver(I), copper(I), gold(III) and palladium(II) ion were extracted selectively into the solid polymer phase. The extraction efficiency of a metal ion such as silver ion increased as the increase of the ratio of the monoaza-tetrathioether group to N-isopropylacrylamide group in the polymer. The quantitative extraction of class b metal ions as well as the liquid–liquid extraction of metal ions with monoaza-tetrathioether molecule was performed.     

Pulse radiolysis studies of poly(methyl methacrylate) containing pyrene

A pulse radiolysis study of poly(methyl methacrylate) in the presence of pyrene has been carried out in the temperature range 100–295 K. The concentration of pyrene was changed from 10⁻³ to 10⁻¹ mol dm⁻³. The absorption/emission spectra and kinetics of solute excited states and solute radical ions were investigated. It was found that pyrene excited states were formed as a result of their radical ion recombination in a time scale up to seconds. The decay of solute radical ions was influenced by photobleaching and can be described by a time-dependent rate constant. The activation energy of Py ions decay was temperature dependent and was equal to 35.7 and 1.2 kJ/mol for temperatures >T_γ and <T_γ, respectively, where T_γ ∼ 175 K represented the transition temperature responsible for γ-relaxation. The reaction mechanism was proposed. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1209–1215, 1998     

Effect of ion content in ionomer on the ion conductivity of polymer electrolytes based on the P(MMA-co-LiMA)/PEG/LiCF3SO3 blend

We have prepared polymer electrolytes composed of poly(methyl methacrylate-co-lithium methacrylate) ionomer (P(MMA-co-LiMA)), low molecular weight PEG, and LiCF₃SO₃ salt. The ion groups in P(MMA-co-LiMA) could enhance the miscibility between the MMA units and PEG in the polymer electrolytes. This miscibility enhancement made the pathway of ion transport less tortuous, and consequently led to the increase in ion conductivity. The maximum ambient ion conductivities in these systems were measured to be in the range of 10⁻⁴–10⁻⁵ S/cm. The polymer electrolytes became transparent at the higher ion content owing to the enhanced miscibility. The mechanical stability of the polymer electrolytes was also improved through the introduction of ion groups into the PMMA. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 991–997, 1998     

Investigation of 500 keV Si ion induced surface structuring of Ni and Ti for enhancement of field emission properties

The present paper reports the investigation of surface morphology, elemental composition, phase changes and field emission properties of Si ion irradiated nickel (Ni) and titanium (Ti). The Ni and Ti targets have been irradiated with 500 keV Si ions generated by Pelletron accelerator at various fluences ranging from 6.9 × 10¹³ to 77.1 × 10¹³ ions/cm². Stopping range of ions in matter analysis revealed higher values of electronic stopping and sputtering yield for Ni as compared with Ti. For both irradiated metals, electronic energy loss dominant over the nuclear stopping. The growth of induced surface structures have been analysed by using field emission scanning electron microscopy (FESEM) analysis. In case of Ni, as the ion fluence increases from 6.9 × 10¹³ to 65.8 × 10¹³ ions/cm², the formation of spherical particulates, agglomers and sputtering is observed. Although in the case of Ti, with the increase of Si ion fluence from 11.6 × 10¹³ to 77.1 × 10¹³ ions/cm², the formation of irregular-shaped particulates along with crater and sputtered channels is observed. X-ray diffraction (XRD) analysis shows that no new phase is identified. However, a significant increase in peak intensity is observed with increasing ion fluence. The variation in crystallite size and dislocation line density is also observed as a function of Si ion fluence. Fourier transform infrared spectroscopy analysis shows that no bands are formed after the Si ion irradiation. Field emission properties of ion-structured Ni and Ti are well correlated with the growth of surface structures observed by SEM and dislocation line density evaluated by XRD analysis.     

High water content clay–nanocomposite hydrogels incorporating guanidinium‐pendant methacrylamide: Tuning of mechanical and swelling properties by supramolecular approach

Novel clay–polymer composite hydrogels with high water content (up to 98 wt %) are developed, in which mechanical properties are reinforced by the formation of multiple ion‐pairs between the polymer chains and clay nanosheets (CNS). When a small amount of guanidinium‐pendant methacrylamide (0.1–0.2 wt %) is copolymerized with a neutral monomer (0.5–2.0 wt %) in an aqueous dispersion of CNS (1.0–3.0 wt %), a self‐standing hydrogel with satisfactory mechanical toughness and elasticity results, despite its high water content (95–98 wt %). The mechanical properties and swelling behaviors of the hydrogels can be tuned by the amount of the guanidinium‐pendant acrylamide. A systematic study indicates that the ion pairs, formed between the guanidinium groups in the polymer chains and the oxyanions on the surfaces of the CNS, serve as crosslinking points in the three‐dimensional network developed in these hydrogels. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 839–847     

Side‐chain glycylglycine‐based polymer for simultaneous sensing and removal of copper(II) from aqueous medium

Since glycylglycine (Gly‐Gly) residue in the N‐terminal region of human prion protein, a copper binding protein, binds with Cu(II), N‐terminus Gly‐Gly side‐chain containing water soluble block copolymer was synthesized and used for simultaneous sensing and removal of Cu(II) ion from aqueous medium. The polymer has amide nitrogen atom and ester carbonyl group as potential binding sites in the side‐chain Gly‐Gly pendants. Job's plot experiment confirms 2:1 binding stoichiometry of polymer with Cu(II). This polymer is able to sense parts per billion level of Cu(II) very selectively in an aqueous medium and remove Cu(II) ions quantitatively by precipitating out the Cu(II) via complex formation in the pH range 7–9. The binding mode of polymer with Cu(II) in polymer‐Cu(II) complex was characterized by ¹H NMR, FTIR, and UV–vis spectroscopy. The attachment of Cu(II) in the polymer‐Cu(II) complex was confirmed by cyclic voltammetry experiment. Cu(II) release from the complex was achieved at pH 5 due to the protonation of amide nitrogen atoms in the Gly‐Gly moiety. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 914–921     

Determination of cyclic structure for polydithiane using electrospray ionization mass spectrometry

Disulfide polymers obtained by ring‐opening polymerization have been considered to have a possibility of a cyclic catenane structure as judged from their test properties on the loss modulus and stress–strain. Electrospray ionization mass spectrometry (ESI‐MS) was used to detemine molecular structure of polydithiane and polyoxyethylene to find whether they are present as a cyclic or as a linear structure. The results indicated that the polydithiane possesses the cyclic structure, and analysis of the isotope distribution of the spectral ions further showed that the polymer consists entirely of the cyclic structure without contamination of a linear polymer. A linear chain polymer with a benzylmercaptan end group was synthesized, and the ESI‐MS analysis revealed that the polymer was a mixture of both the cyclic and the linear polymer. The cyclic polymer is probably formed by back‐biting of the highly reactive sulfur radicals that had been formed during the polymerization reaction. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4403–4406, 2000     

Metal‐imprinted microsphere prepared by surface template polymerization and its application to chromatography

A metal ion‐imprinted microsphere was prepared by surface molecular template polymerization. Trimethylolpropane trimethacrylate (TRIM), zinc ions, 1,12‐dodecanediol‐O, O′‐diphenyl phosphonic acid (DDDPA) were used as a crosslinking agent, an imprint molecule, and a functional host molecule. The Zn(II)‐imprinted microspheres, which are spherically well‐defined particles, were prepared by using water‐in‐oil‐in‐water (W/O/W) multiple emulsions. The combination of TRIM and DDDPA serves to align the recognition sites resulting in better template sites produced on the polymer surface. We firstly conducted diagnostic zinc‐ and copper‐ion adsorption tests with the Zn(II)‐imprinted and unimprinted microspheres in order to make an assessment on the effectiveness of the molecular imprinting technique. Further, the metal‐imprinted microspheres were applied to the column operation. The separation and recovery of metals were carried out by an adsorption column packed with the Zn(II)‐imprinted microspheres. This performance was compared to that of commercial chelating resins that possess similar phosphoric functional groups. The Zn(II)‐imprinted polymer shows an extremely high selectivity to the imprinted zinc ions compared to that of the commercial chelating resin. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 689–696, 2000     

Transport properties of anion exchange membranes prepared by the reaction of crosslinked membranes having chloromethyl groups with 4‐vinylpyridine and trimethylamine

The electrodialytic transport properties of new anion exchange membranes were evaluated that included the transport numbers of various anions, sulfate, bromide, fluoride, and nitrate ions, relative to chloride ions and current efficiency. The anion exchange membranes were prepared by the reaction of copolymer membranes crosslinked to different extents having chloromethyl groups with 4‐vinylpyridine to form a ladder‐like polymer in the membranes and then with trimethylamine to convert the remaining chloromethyl groups to benzyl trimethylammonium groups. The transport numbers of the sulfate and fluoride ions relative to the chloride ions were markedly less for the membranes that had been reacted with 4‐vinylpyridine and then with trimethylamine compared with those of the membranes that had been reacted only with trimethylamine. On the other hand, the selective permeation of nitrate and bromide ions through the membranes was enhanced by the reaction with 4‐vinylpyridine although the membranes became tighter by the reaction. The decrease in permeation of the sulfate ions was attributed to a synergistic effect involving the decrease in sulfate ions ion‐exchanged with the membranes and the decrease in mobility of the sulfate ions in the membranes with a low degree of crosslinking. Though the ion‐exchanged sulfate ion content was the lowest in the highly crosslinked membranes, the mobility ratio between the sulfate ions and chloride ions did not decrease in the membranes. However, the increase in the permeation of nitrate ions was based on the increase in the ion‐exchanged amount of nitrate ions with the membrane, and not the change in the mobility ratio between the nitrate and chloride ions. The formation of the ladder‐like polymer in the membrane matrix brought on a decrease in the hydrophilicity of the membranes due to pyridine groups and an increase in their tightness. The current efficiency of all membranes was greater than 99% during the electrodialysis of 0.50 N salt solutions. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1773–1785, 1999     

Calculation on ion exchange capacity for an ion exchanger using the potentiometric titration

We calculated the characteristics of a phosphoric cation exchanger and studied an accurately computable method for ion exchange capacity for a type of potentiometric titration curve. The ion exchanger was prepared by phosphorylation of a styrene‐divinylbenzene copolymer. The ion exchange capacity was 5.7 meq/g. The experimental pK values versus χ in a phosphoric cation exchanger can explain a linear equation. The ΔpK values were obtained from the slope of a linear equation. The ΔpK values were the differences of pK values between the apparent equilibrium constant at complete and zeroth neutralization of the ion exchanger. The experimental pK values at χ = 0.5 (χ:degree of neutralization of ion exchanger) showed good agreement with the theoretical data. When it was titrated with NaOH and Ba(OH)₂ solutions, a good agreement between experimental and theoretical pK values for various χ was found in all potentiometric titration curves. The potentiometric titration curve near the inflection point in the case of divalent ions was changed more sharply than that for monovalent ions. The plot of ∂pH/∂g versus g (number of moles of alkali to 1 g of ion exchanger) was fitted to the Lorenzian distribution, from which ion exchange capacity was accurately evaluated. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3181–3188, 2000     

Round-robin test of medium-energy ion scattering for quantitative depth profiling of ultrathin HfO2/SiO2/Si films

Medium-energy ion scattering (MEIS) has been used for quantitative depth profiling with single atomic layer resolution to determine the composition, thickness, and interface structure of ultrathin films and nanoparticles. To assure the consistency of the MEIS analysis, an international round-robin test (RRT) with nominally 1-, 3-, 5-, and 7-nm thick HfO₂ films was conducted among 12 institutions. The measurements were performed at each participating laboratory under their own conditions, and the collected data were analyzed. For the data analysis, the Moliere potential, the stopping and range of ions in matter (SRIM) 95 and new fitted electronic stopping power and the Chu straggling were used. For analyzing the MEIS data from the magnetic sector and electrostatic analyzers, the neutralization corrections of Marion and Young for 100-keV H⁺ and He⁺ ions and of Armstrong for 400- to 500-keV He⁺ ions were used. The standard deviations were 5.3% for the composition, 15.3% for the thickness, and 13.3% for the Hf content, and they were improved to 7.3%, 4.5%, and 7.0% by using refitted electronic stopping powers based on the experimental data. Hence, this study suggests that correct electronic stopping powers are critical for quantitative MEIS analysis.     

Crosslinked anion exchange membranes with connected cations

The selective transport of ions has crucial importance in biological systems as well as modern‐day energy devices, such as batteries and fuel cells, and water purification membranes. Control over ion movement can be exerted by ligation, ion channel dimensions, solvation, and electrostatic interactions. Polyelectrolyte hydrogels can provide aligned pathways for counter ion transport but lack mechanical integrity, while polyelectrolyte membranes typically suffer from the absence of an ion transport channel network. To develop polymer membranes for improved ion transport, we present the design of a novel material that combines the advantages of aligned pathways found in polyelectrolyte hydrogel and mechanical robustness in conventional membranes. The ionic species were organized via controlled copolymerization of a quaternizable monomer. Additionally, dimensional stability was then incorporated through a cast/crosslinking method to lock in the network of connected cationic groups. This strategy resulted in dramatically enhanced ion transport, as characterized by ionic conductivities (>80 mS/cm for Cl^–, and ∼200 mS/cm for OH^–). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 618–625     

Induced changes of polymer organization in a gel of poly(vinyl alcohol) crosslinked by Congo red

Different gel microstructures are induced at variable poly(vinyl alcohol) (PVA) and Congo red concentrations, as revealed by ultrarapid freezing and a replica technique for transmission electron microscopy. The polymer microstructures observed include random coils, rigid polymer rods, and long fibers. The development of the different polymer conformations is proposed to be dependent on the degree of intramolecular and intermolecular crosslinking and on the electrostatic interactions of the Congo red ions. The rigid‐rod conformation appears to be the most energetically stable form; it is disrupted by electrostatic effects around the polymer overlap concentration (C*_PVA). We propose that the gel microstructure influences the physical properties of the gel. Gels possessing the rigid‐rod microstructure have increased Young's storage modulus values. Two possible mechanisms of gelation are suggested. The first describes a one‐stage reaction when the polymer concentration approximates C*_PVA, where polymers in an extended random‐coil conformation undergo intermolecular crosslinking without any microstructural changes. The second describes a two‐stage reaction when the polymer concentration is less than or greater than C*, where a disorder–order transition results in the formation of rigid polymer rods and fibers followed by the formation of a macromolecular network. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1471–1483, 2001     

Viscosity behavior of poly(glyceryl methacrylate) in the presence of borate and phenylboronate ions

The viscosity behavior of polyelectrolyte solutions induced by borate or phenylboronate complexation with poly(glyceryl methacrylate) (PGM) has been investigated. In dilute solutions borate ions can form monodiol (1/1) complexes and didiol (2/1) intramolecular complexes. Both types of complex are anionic. Thus, the polymer is characterized by the existence of charged sites on the chain and loops formed by intramolecular complexation. On the contrary, phenylboronate can only give monodiol 1/1 complexes. In the presence of passive salt, the charges are screened. By addition of borate ion to a PGM solution, a decrease of the initial polymer viscosity due to loop formation is first observed, then the anionic charges fixed on the chain by complex formation induce an expansion of the polyelectrolyte and the viscosity of the solution increases. The situation is different for the PGM-phenyl boronate system, where no intramolecular crosslink is present. In this case the viscosity of the solution increases with phenyl boronate concentration. But for a fixed complexing ion concentration it will tend to that of the neutral polymer when NaCl is added. ©1995 John Wiley & Sons, Inc.     

Wavelength‐selected radiothermoluminescence of polyethylene doped with pyrene

Radioluminescence from electron‐irradiated polyethylene doped with pyrene was investigated in the temperature range of 77–273 K. The spectra of emitted light were recorded, and temperature dependences of radioluminescence intensities at chosen wavelengths were examined using a wavelength‐selected radiothermoluminescence technique. The experimental results were explained in terms of an electron‐solute radical cation and solute radical ions recombination. Pyrene excimer emission was observed in the glass transition temperature range of the polyethylene matrix. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3378–3382, 2000