Multiple filamentation of femtosecond laser pulses

The formation of fluorescent channels with color centers in LiF crystals under the action of the multiple filamentation of femtosecond laser pulses is studied experimentally and theoretically for pulse powers around four orders of magnitude higher than the critical self-focusing value.     

Optical breakdown versus filamentation in fused silica by use of femtosecond infrared laser pulses

The competition between optical breakdown (OB) and laser-pulse filamentation (FL) in bulk fused silica is investigated by using a 1-kHz femtosecond infrared laser. We measure input powers corresponding to the threshold of OB and FL in terms of external focusing conditions. The results demonstrate that OB precedes FL for tight focusing, whereas for sufficiently long focal lengths FL takes places at a lower power than OB does.     

Self-assembled volume vortex grating induced by femtosecond laser pulses in glass

We presented a microfabrication process for optical volume vortex grating inside glass by femtosecond laser pulses. The self-trapped filament of femtosecond laser pulses can induce hundreds μm-long region refractive-index changes in glass. We realized the restructured optical vortex beams using a collimated He–Ne laser beam. The maximum first-order diffraction efficiency was about 19.6%. The volume vortex grating structure fabricated in glass is polarization dependent.     

Multiple filamentation of intense femtosecond laser pulses in air

The propagation of focused femtosecond laser pulses with supercritical peak powers in air has been investigated by the methods of optical visualization, profilometry, and calorimetry. Laser pulses with supercritical powers create a bundle of submillimeter filaments with a diameter of about 5 μm ahead of the lens focus; the maximum number of filaments in the beam cross section and their length increase linearly and sublinearly, respectively, with the radiation peak power. The optical visualization and calorimetry indicate that the plasma channels of filaments are optical contrast (a plasma density of 10¹⁸–10¹⁹ cm⁻³), ensuring the refraction of laser radiation incident on them.     

Micromachining soda-lime glass by femtosecond laser pulses

The physical process of forming a modified region in soda-lime glass was investigated using 1 kHz intense femtosecond laser pulses from a Ti: sapphire laser at 775 nm. Through the modifications induced by the femtosecond laser radiation using selective chemical etching techniques, we fabricated reproducible and defined microstructures and further studied their morphologies and etching properties. Moreover, a possible physical mechanism for the femtosecond laser modification in soda-lime glass was proposed.     

Self-guided glass drilling by femtosecond laser pulses

Straight through-holes of high aspect ratio have been fabricated in glass by femtosecond laser pulses, utilizing unique characteristics of ultrafast lasers such as volumetric multi-photon absorption and nonlinear self-focusing. In this study, interestingly, the drilling process was initiated and progressed in a self-regulated manner, while the laser focus was fixed through the specimen at the neighborhood of the rear surface that was in contact with liquid during the entire drilling process. The deposition of laser energy along the nonlinearly extended focal range and the guided drilling along the pre-defined region are explained based on time-resolved optical transmission and emission measurements.     

Wavelength tuning of femtosecond pulses generated in nonlinear crystals by using diffractive lenses

We demonstrate that diffractive lenses (DLs) can be used as a simple method to tune the central wavelength of femtosecond pulses generated from second-order nonlinear optical processes in birefringent crystals. The wavelength tunability is achieved by changing the relative distance between the nonlinear crystal and the DL, which acts in a focusing configuration. Besides the many practical applications of the so-generated pulses, the proposed method might be extended to other wavelength ranges by demonstrated similar effects on other nonlinear processes, such as high-order harmonic generation.     

Competition between multiphoton/tunnel ionization and filamentation induced by powerful femtosecond laser pulses in air

In this work we present experiments by focusing 42 femtosecond laser pulses in air using three differentfocal length lenses: f=100, 30 and 5 cm. For the longest focal length, only the filament, which is aweak plasma column,is observed. When the shorter focal length lens is used, a high density plasma isgenerated near the geometrical focus and coexists with a weak plasma channel of the filamemt. Under thetightest focusing condition, filamentation is prevented and only a strong plasma volume appears at tehgeometrical focus.     

Water-assisted drilling of microfluidic chambers inside silica glass with femtosecond laser pulses

Microfluidic chambers embedded in silica glass are drilled by water-assisted ablation with a femtosecond laser. The continuous scanning ablation increases the processing speed up to 50 μm/s. Not only may microchambers or microtrenches be obtained at high speed and in one step, but also combined structures consisting of cascaded microchambers and microtrenches may be fabricated. The inner-wall morphology of the microchambers is analyzed by a scanning electron microscope. PACS 87.80.Mj; 52.38.Mf; 82.50.Pt; 42.62.-b; 42.70.Ce     

Wavelength division with three-dimensional couplers fabricated by filamentation of femtosecond laser pulses

Refractive-index changes can be induced by filamentation of 800-nm, 1-kHz femtosecond laser pulses in silica glass. Two-dimensional translation of a 40-microm-long filament leads to the formation of a curved waveguide because of bending by the previously induced refractive-index change. The fabrication of 2-mm directional couplers to split the coupled beam into 1:1 at a wavelength of 632.8 nm is demonstrated. The realization of three-dimensional directional couplers and wavelength division in the output from the couplers is also demonstrated.     

Optical waveguide arrays induced in fused silica by void-like defects using femtosecond laser pulses

We report a new approach to the microfabrication of permanent optical waveguide arrays inside fused silica induced by focusing infrared femtosecond laser pulses with microjoule energy. These arrays consist of waveguides limited by void-like damage zones with very loose coupling among adjacent guides, thus allowing the excitation of a single one. The proposed method shows the possibility of using created void-like structures for both the fabrication of integrated optical devices as well as for the control of previously induced refractive index change regions. PACS 42.65.Re; 42.82.Et; 42.79.-e     

Optical seizing and merging of voids in silica glass with infrared femtosecond laser pulses

We demonstrate that one can seize and translate voids formed by IR femtosecond laser pulses inside silica glass and can also cause two voids to merge into one. We also present clear evidence of a void and its surrounding region by showing scanning electron microscope images of cleaved voids, which we produced by cleaving through the glass along a plane that included a thin laser-ablated line on the surface of the glass and the voids formed inside.     

整形飞秒激光脉冲的成丝超连续辐射控制

飞秒激光成丝超连续辐射具有高强度和高时空相干性等优点,作为一种超宽带光源在很多领域都具有广泛的应用前景.本文提出一种结合微透镜阵列的空间调制和基于液晶空间光调制器的时域整形的飞秒激光脉冲整形方式,利用基于遗传算法的反馈优化控制,实现了飞秒激光在熔融石英中成丝产生的超连续辐射强度的调制,得到了在一定范围内光谱强度可控的超连续辐射光谱;光谱的能量密度可以从0.03μJ/nm调制到0.09μJ/nm,其能量密度变化达到了初始值的3倍.计算了典型迭代代数对应的整形脉冲时域包络,分析了超连续光谱随迭代代数的演化趋势,结果表明,脉冲包络的峰值强度和波形分布是影响超连续光谱展宽和强度的主要物理原因.     

Optical and ultrasonic monitoring of femtosecond laser filamentation in fused silica

Millimeter-long filaments and accompanying luminous plasma and defect channels created in fused silica (FS) by single focused femtosecond laser pulses with supercritical powers were probed in situ using optical imaging and contact ultrasonic techniques. Above the threshold pulse energy E_opt = 5 μJ corresponding to a few megawatt power levels pulses collapse due to self-focusing, producing channels filled by electron-hole plasma and luminescent defects, and exhibits predominantly compressive pressure transients. Analysis of the optical and ultrasonic response versus the laser pulse energy suggests that filamentary pulse propagation in the channels occurs with considerable dissipation of about ∼10 cm⁻¹. The predominant ionization mechanism is most likely associated with avalanche ionization, while the main mechanism of optical absorption is free-carrier absorption via inverse Bremsstrahlung interaction with the polar lattice.     

Spatio-temporal evolution scenarios of femtosecond laser pulse filamentation in fused silica

We investigated the evolution of femtosecond laser pulses at different wavelengths corresponding to normal, zero, and anomalous regimes of group velocity dispersion (GVD) in fused silica. The laser pulse filamentation in different GVD regimes under the same similarity parameters was first considered. It was established numerically that the scenario of the pulse filamentation depends both on temporal factors, which are determined by pulse GVD and self-phase modulation, and spatial factors associated with Kerr self-focusing and plasma defocusing. In presence of strong normal GVD the dispersive stretching causes, a pulse power decrease followed by lowering of the intensity in filament, electron density reduction in plasma channel, and suppressing of the refocusing. For zero GVD the multipeak regime of radiation propagation is realized in the filament as a result of recurring self-focusings of powerful pulse tail, which was defocused in laser plasma. When GVD is anomalous a sequence of ??light bullets?? with duration about 10 fs forms in the filament. And the peak intensity in ??light bullet?? stays the same ?? 5 × 10¹³ W/cm². In the regime of anomalous GVD power is transferred from the pulse edges to its center, where the repeated self-focusings occur and form a ??light bullet?? sequence.     

Modulation grating achieved by two interfered femtosecond laser pulses on the surface of the silica glass

Modulation grating has been achieved by two interfered femtosecond laser pulses on the surface of the silica glass. The modulation grating formed at the middle of each bulge of the common grating and was attributed to the higher-order modulation arising from second-harmonic generation (SHG) of the femtosecond laser pulse incident to the surface of silica glass. The periods and depths of the fundamental grating and the modulation grating have been observed by using an atomic force microscopy (AFM). Experimental results show that the average depth of the modulation grating is nearly a half of the depth of the fundamental grating.     

Three-dimensional hole drilling of silica glass from the rear surface with femtosecond laser pulses

By moving silica glass in a preprogrammed structure, we directly produced three-dimensional holes with femtosecond laser pulses in single step. When distilled water was introduced into a hole drilled from the rear surface of the glass, the effects of blocking and redeposition of ablated material were greatly reduced and the aspect ratio of the depth of the hole was increased. Straight holes of 4-mu;m diameter were more than 200 microm deep. Three-dimensional channels can be micromachined inside transparent materials by use of this method, as we have demonstrated by drilling a square-wave-shaped hole inside silica glass.     

Irradiation of glass with infrared femtosecond laser pulses

We report a novel resistive random access memory using tri-layer dielectrics of GeO _x /nano-crystal TiO₂/TaON and low cost top Ni and bottom TaN electrodes. Excellent device performance of ultra-low 720 fJ switching energy, tight distributions of set/reset currents, and exceptionally long endurance of 5×10⁹ cycles were achieved simultaneously. Such excellent endurance may create new applications such as those used for Data Centers that are ascribed to the higher-κ nano-crystal TiO₂, hopping pass via grain boundaries, and fast switching speed of 100 ns to improve the dielectric fatigue during endurance stress.     

Direct phase and amplitude characterization of femtosecond laser pulses undergoing filamentation in air

Measurement of the temporal (spectral) phase and amplitude of a 50 fs laser pulse approaching and exceeding the critical power for self-focusing (P(crit)) in air reveals the formation of an isolated 17 fs pulse at 3P(crit). The dynamics of self-shortening are measured directly in the filament using transient-grating cross-correlation frequency-resolved optical gating with a noble gas serving as the nonlinear medium. Our results support recent filamentary propagation simulations, suggesting that a Kerr-dominated temporal reshaping process toward the end of the filament is largely responsible for the generation of short pulses.