Adsorptive stripping voltammetric determination of netilmicin in the presence of formaldehyde

A linear sweep adsorptive stripping voltammetric method for the determination of netilmicin in the presence of formaldehyde has been proposed for the first time. In the presence of 3.0×10⁻³ g ml⁻¹ formaldehyde, netilmicin exhibits a sensitive cathodic peak at −1.30 V (vs. the saturated calomel electrode, SCE) in a medium of Britton–Robinson buffer (pH 8.7) with a scan rate of 100 mV s⁻¹ after a preconcentration period of 120 s at −1.10 V (vs. SCE). The peak current showed a linear dependence on the netilmicin concentration over the range 4.2×10⁻⁹–1.0×10⁻⁷ g ml⁻¹. The achieved limits of detection and quantitation were 1.0×10⁻¹⁰ and 3.3×10⁻¹⁰ g ml⁻¹ netilmicin, respectively. It was deduced from the experiments that the amine–aldehyde condensation product formed between netilmicin and formaldehyde is mainly responsible for the appearance of the peak. The electrochemical behavior of netilmicin in the presence of formaldehyde has been studied. The method was applied to the direct determination of netilmicin in injectable formulations and spiked human urine and serum samples.      

A simple linear sweep voltammetric method for the determination of double-stranded DNA with malachite green

In pH 3.5 Britton—Robinson buffer solution double-stranded (ds) DNA can react with malachite green (MG) to form an interaction complex, which resulted in the decrease of the electrochemical response of MG, MG had a well-defined second-order derivative linear sweep voltammetric peak at −0.73 V (vs. SCE). After the addition of dsDNA into MG solution, the reductive peak current decreased with the positive shift of peak potential, which was the typical characteristic of intercalation. Based on the interaction, an indirect electrochemical determination method for dsDNA was established. The optimum conditions for the reaction were investigated and there were little or no interferences from the commonly coexisting substances. The decrease of peak current was linear with the concentration of dsDNA over the range of 0.8–12.0 μg cm⁻³ with the linear regression equation as ΔI _p″/nA = 91.70 C/(μg cm⁻³) + 74.55 (n = 10, γ = 0.990). The detection limit was calculated as 0.46 μg cm⁻³ (3σ). The method had high sensitivity and was further applied to the dsDNA synthetic samples with satisfactory result. The interaction mechanism was discussed with the intercalation of DNA-MG to form a supramolecular complex and the stoichiometry of the supramolecular complex was calculated by electrochemical method with the binding number 3 and the binding constant 2.35 × 10¹⁵ (mol dm⁻³)⁻³.     

Separation and determination of rutin and quercetin in the flowers ofSophora japonica L. by capillary electrophoresis with electrochemical detection

Summary Capillary electrophoresis with amperometric detection has been evaluated for the simultaneous determination of rutin and quercetin. The cyclic voltammogram, hydrodynamic voltammogram, and the effects of pH, concentration of buffer and sodium dodecyl sulfate (SDS), and amount of organic modifier on the separation and the detection were studied. The optimized conditions were: detection potential 1.2V, separation at 12 kV, 5 s at 15 kV for sample injection, running electrolyte 20 mmol L⁻¹ borate buffer, pH 8.8, containing 40 mmol L⁻¹ SDS and 10% acetonitrile. The detection limit of the method was low, 0.001 and 0.0005 mg mL⁻¹, for rutin and quercetin, respectively; the linear ranges were wide −0.005–0.5 and 0.005–0.4 mg mL⁻¹, respectively. The variations in peak current and migration time for eight consecutive injections of a standard solution containing 0.1 mg mL⁻¹ of each compound were 4.78 and 3.63%, and 6.50 and 2.59% for rutin and quercetin, respectively. The levels of the two compounds in traditional Chinese herbal drugs were easily determined.     

Electrochemistry and voltammetric determination of tannic acid on a single-wall carbon nanotube-coated glassy carbon electrode

The voltammetric behavior of tannic acid (TA) on a single-wall carbon nanotubes (SWNTs) modified glassy carbon electrode has been investigated by cyclic voltammetry. TA can generate a well-defined anodic peak on the modified electrode at around 0.42 V (vs. SCE) in 0.10 M phosphate buffer solutions (pH = 4.0). The electrochemical reaction involves 1e transfer, accompanied by one proton. The electrode process is controlled by adsorption. The parameters affecting the response of TA, such as solution pH, accumulation time and accumulation potential are optimized for the determination of TA. Under the optimum conditions, the peak current changes linearly with the TA concentration in the range of 5.0 × 10⁻⁸–1.0 × 10⁻⁶ M. The lowest detectable concentration of TA is 8.0 × 10⁻⁹ M after 180 s accumulation. This method has been successfully applied to the determination of TA in tea and beer samples. In addition, the influence of potential interferents is examined. In the presence of bovine serum albumin, the peak current of TA decreases linearly due to the formation of a super-molecular complex.     

Adsorptive Voltammetric Studies on the Cerium(III)–Alizarin Complexon Complex at a Carbon Paste Electrode

A novel procedure was developed for the determination of trace cerium on the basis of anodic adsorption voltammetry of the Ce(III)–alizarin complexon (ALC) complex at a carbon paste electrode (CPE). The procedure is convenient to determine cerium individually in the presence of other rare earths because there is a 100 mV difference between the peak potentials of Ce(III)–ALC and other rare earth(III)–ALC complexes in a supporting electrolyte of 0.08 M HAc–NaAc and 0.012 M potassium biphthalate (pH 4.7) when performing linear-scanning from −0.2 to 0.8 V (vs. SCE) at 100 mV/s. The second-order derivative peak currents are directly proportional to the Ce(III) concentration over a range of 6.0 × 10⁻⁹–3.0 × 10⁻⁷ M. The detection limit is as low as 2.0 × 10⁻⁹ M (S/N = 3) for a 120 s preconcentration. An RSD of 3.5% was obtained for 15 determinations of Ce(III) at a concentration of 4.0 × 10⁻⁸ M on the same CPE surface. The method was applied successfully to the determination of cerium in samples of rare earth nodular graphite cast iron.     

Sensitive determination of fluphenazine at a dodecanethiol self-assembled monolayer-modified gold electrode, and its electrocatalysis to phenylephrine

Fluphenazine, an important tranquilizer, was found to undergo effective accumulation on dodecanethiol (DDT) self-assembled monolayer modified gold electrode (i.e. DDT/Au) and generated two anodic peaks at about 0.7 and 0.79 V (vs. SCE) in 0.05 M Na₂B₄O₇ (pH = 9.3) buffer solution. Sensitive and quantitative measurement of fluphenazine based on the former anodic peak was established under optimum conditions. The peak current was linear to fluphenazine concentration in the range from 5 × 10⁻⁷ to 5 × 10⁻⁵ M, with a detection limit of 5 × 10⁻⁹ M. This method was successfully applied to the determination of fluphenazine in drug tablets and proved to be reliable compared with UV spectrophotometry. In the presence of fluphenazine, the electrochemical oxidation of phenylephrine was catalyzed. The DDT self-assembled monolayer was characterized by Fourier transform infrared spectroscopy, surface Raman spectroscopy, X-ray photoelectron spectroscopy, electrochemical impedance spectroscopy, and electrochemical probing.     

Voltammetric Determination of Folic Acid with a Multi-Walled Carbon Nanotube-Modified Gold Electrode

The voltammetric behavior of folic acid (FA) at a multi-walled carbon nanotube (MWNT) modified gold electrode has been investigated by cyclic voltammetry, chronoamperometry and chronocoulometry. The modified electrode exhibits a good promoting effect on the electrochemical reaction of FA. FA can generate a well-defined anodic peak at around 0.83 V (vs. SCE) in 0.1 M H₃PO₄–NaH₂PO₄ buffer solution of pH 2.5. The peak results from a 2-electron transfer of FA, and the standard potential of FA is estimated to be 0.79 V (vs. SCE). The parameters affecting the response of FA, such as solution pH, accumulation time, accumulation potential, and amount of MWNTs are optimized for the determination of FA. Under the optimum conditions, the peak current changes linearly with FA concentration in the range from 2.0 × 10⁻⁸ M to 1.0 × 10⁻⁶ M. This method has been applied to the determination of FA in drug tablets, and the recovery is 93.9–96.9%. In addition, the influence of some coexistent species is examined. When a Nafion layer is introduced on the gold electrode before deposition of MWNTs, the resulting composite electrode can give better response to FA. At the same time, the interference by some foreign species is suppressed to some extent.     

Separation and simultaneous determination of quinolone antibiotics by capillary zone electrophoresis

Summary The potential of capillary zone electrophoresis has been investigated for the separation and quantitative determination of some quinolone antibiotics. The influence of different conditions, such as the nature and concentration of the electrophoretic electrolyte, on migration time, peak symmetry, efficiency and resolution was studied. A buffer consisting of 100mm HEPES adjusted to pH 8.5 containing 10% (v/v) acetonitrile was found to furnish a very efficient and stable electrophoretic system for the separation of exoxacin, ciprofloxacin, ofloxacin, oxolinic acid, nalidixic acid and pipemedic acid. A linear relationship between concentration and peak area for each compound was obtained in the concentration range 0.25–40 μg mL⁻¹; detection limits were approximately 0.25 ng mL⁻¹. It was demonstrated that the method can be used for the simultaneous determination of these six antibiotics in serum and urine samples.     

Electrochemical behavior of phenol at acetylene black-dihexadecyl hydrogen phosphate composite modified glassy carbon electrode in the presence of cetyltrimethylammonium bromide

The electrochemical response of phenol at acetylene black (AB)-dihexadecyl hydrogen phosphate (DHP) composite modified glassy carbon electrode in the presence of cetyltrimethylammonium bromide (CTAB) was investigated. In this system, a sensitive oxidation peak at 0.62 V (SCE) was obtained. The electrode process and the influence of CTAB on the oxidation of phenol were explored by chronocoulometry and linear sweep voltammetry (LSV). Experimental conditions for the determination of phenol were optimized. In the range of 5.0 × 10⁻⁷ to 1.2 × 10⁻⁵ M, the phenol concentration was linear with the oxidation peak current and the detection limit was found to be 1.0 × 10⁻⁷ M for 3 min accumulation. The method was applied for the determination of phenol in lake water and the results were satisfactory. Published in Russian in Elektrokhimiya, 2008, Vol. 44, No. 2, pp. 222–229. The text was submitted by the authors in English.     

Voltammetric determination of nicotinic acid by glassy-carbon electrode modified with multiwall carbon nanotubes

A glassy-carbon electrode modified with a thin film of multiwall carbon nanotubes is used for the determination of nicotinic acid (NA). At the electrode, the latter yields a well-defined and very sensitive oxidation peak at 0.21 V (SCE). Investigation of the electrochemical behavior of NA shows that the electrode significantly enhances the NA oxidation peak current, compared with the non-modified electrode. Based on this, a very sensitive and simple electrochemical method is proposed for the NA determination after the optimization of all experimental parameters. The oxidation peak current is proportional to the NA concentration over the range 2×10⁻⁷ to 4×10⁻⁵ M, and the detection limit is 8×10⁻⁸ M after a 4-min accumulation. The relative standard deviation of 5.4% for the successive determination of 1×10⁻⁶ MNA (n=10) indicates excellent reproducibility. The analysis method is successfully demonstrated using tablet samples. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 2, pp. 190–195. The text was submitted by the author in English.     

Sensitive voltammetric detection of clomipramine at 16-mercapto-hexadecanoic acid self-assembled monolayer modified gold electrode

Clomipramine, an effective and important antipsychotic drug with low redox activity and poor hydrophilicity, was found to effectively accumulate on hydrophobic 16-mercaptohexadecanoic acid (i.e. MHA) self-assembled monolayer (SAM) modified gold electrode (i.e. MHA/Au) and generating a sensitive anodic peak at about 0.86 V (vs. SCE) in 0.05 M Tris–HCl (pH = 8.1) buffer solution. Thus, quantitative measurement of clomipramine was established with high sensitivity under optimum conditions. The anodic peak current was linear to clomipramine concentration in the range from 1 × 10⁻⁶ to 5 × 10⁻⁵ M, with a detection limit of 6 × 10⁻⁹ M. This method was successfully applied to the detection of clomipramine in drug tablets and proved to be reliable compared to UV. The spectral features, electrochemical characteristics and wettability of MHA-SAM were also studied. Correspondence: Jilie Kong, Department of Chemistry, Fudan University, Shanghai 200433, P.R. China     

Electrochemical properties and square-wave voltammetric determination of pravastatin

The electrochemical reduction and adsorptive voltammetric behaviour of pravastatin have been studied by means of cyclic and square-wave voltammetry at a hanging mercury-drop electrode in electrolytes of different pH. Within the entire pH range (2.0–9.0) in Britton–Robinson buffer, pravastatin gave rise to a single voltammetric peak in the potential interval from −1.22 to −1.44 V, depending on pravastatin concentration. It was found that the reduction of pravastatin proceeds via a relatively stable intermediate, which is transformed to the final electroinactive product by a coupled chemical reaction or can be re-oxidized back to pravastatin. The rate of chemical transformation is controlled by the proton concentration. The electrode mechanism has the properties of a surface redox reaction. A sensitive analytical method for trace analysis of pravastatin based on the adsorptive stripping technique has been developed. The calibration plot was linear in the range 8×10⁻⁸–5×10⁻⁷ mol L⁻¹. Application of the square-wave voltammetric method to determination of pravastatin in a pharmaceutical dosage form, without sample pretreatment, resulted in acceptable deviation from the stated concentration.     

Electrochemical studies on the interaction of heparin with crystal violet and its analytical application

In this paper, crystal violet (CV) was used to determine heparin concentration by linear sweep voltammetry on a dropping mercury electrode (DME). In Britton-Robinson (B-R) buffer solution, pH 3.0, CV had a well-defined second-order derivative linear sweep voltammetric reductive wave at −0.74 V (vs. SCE). After the addition of heparin to the CV solution, the reductive peak current decreased greatly with the positive movement of the peak potential and without appearance of new peaks in the scanning potential range. Based on the decrease in the reductive peak current, a new voltammetric method for the determination of heparin was established. The conditions for the interaction and the electrochemical detection were optimized, and interfering substances were investigated. Under the optimal conditions, the decrease in reductive peak currents of CV was proportional to heparin concentration in the range 0.1–8.0 mg/L with the linear regression equation Δip″(nA) = 400.42 + 1563.11c (mg/L), (n = 14, γ = 0.993). The detection limit was 0.092 mg/L. This new method was further successfully applied to the determination of heparin content in heparin sodium injection samples with satisfactory results. The binding ratio and binding mechanism were also studied by the electrochemical method. The text was submitted by the authors in English.     

An optode membrane for determination of gold using a simple light-emitting diode-based device

Abstract  

A selective optode based on immobilization of 5-(p-dimethylaminobenzylidene)rhodanine on a triacetylcellulose membrane was developed for quantitative determination of Au(III). The determination procedure was performed using a simple light-emitting diode (LED)-based device as a new effort to overcome low reproducibility and repeatability problems which usually accompany optode-based determinations. The results obtained were compared with those of conventional spectrophotometric methods. The response characteristics of the sensor including dynamic range, reproducibility, response time, and lifetime are discussed in detail. This sensor was used for the determination of Au(III) in ore and electroplating liquid effluent samples with satisfactory results in comparison with flame atomic absorption spectroscopy as standard method. Under the optimum conditions, the calibration plot was linear in the concentration range of 0.3–6.0 μg cm⁻³. The relative standard deviations for five replicate determinations of 1.0 μg cm⁻³ Au(III) and the corresponding limits of detection were 1.76% and 0.12 μg cm⁻³, respectively.     

Glassy carbon and boron doped glassy carbon electrodes for voltammetric determination of linuron herbicide in the selected samples

In this study the application of home-made unmodified (GC) and bulk modified boron doped glassy carbon (GCB) electrodes for the voltammetric determination of the linuron was investigated. The electrodes were synthesized with a moderate temperature treatment (1000°C). Obtained results were compared with the electrochemical determination of the linuron using a commercial glassy carbon electrode (GC-Metrohm). The peak potential (E _p ) of linuron oxidation in 0.1 mol dm⁻³ H₂SO₄ as electrolyte was similar for all applied electrodes: 1.31, 1.34 and 1.28 V for GCB, GC and GC-Metrohm electrodes, respectively. Potential of linuron oxidation and current density depend on the pH of supporting electrolyte. Applying GCB and GC-Metrohm electrodes the most intensive electrochemical response for linuron was obtained in strongly acidic solution (0.1 mol dm⁻³ H₂SO₄). Applying the boron doped glassy carbon electrode the broadest linear range (0.005–0.1 μmol cm⁻³) for the linuron determination was obtained. The results of voltammetric determination of the linuron in spiked water samples showed good correlation between added and found amounts of linuron and also are in good agreement with the results obtained by HPLC-UV method. This appears to be the first application of a boron doped glassy carbon electrode for voltammetric determination of the environmental important compounds.      

Voltammetric determination of hyaluronic acid based on its interaction with phenosafranine

In this paper, a cationic dye of phenosafranine (PSF) was selected as a bioprobe to determine hyaluronic acid (HA) by linear sweep voltammetry on the dropping mercury working electrode (DME). In pH 4.5 Britton-Robinson (B-R) buffer solution, PSF has a well-defined second order derivative linear sweep voltammetric reductive peak at −0.42 V (vs. SCE). After the addition of HA into the PSF solution, the reductive peak current decreased apparently without the movement of reductive peak potential. Based on the decrease of the reductive peak current, a new voltammetric method for HA determination was established. The conditions for the interaction and the electrochemical detection were optimized and the interference substances for the detection were investigated. Under the optimal experimental conditions the difference of peak current was directly proportional to the concentration of HA in the range from 0.8 to 50.0 mg/l with the linear regression equation as Δip″ (nA) = 93.85 + 22.92c (mg/l) (n = 14, γ = 0.995) and the detection limit was calculated as 0.901 mg/l (3). This new method was further applied to determine the HA content in the synthetic samples with satisfactory results and good recovery. The stoichiometry of PSF-HA complexes was calculated and the binding mechanism was also discussed.     

RP-HPLC determination of midecamycin and related impurities

Summary A method has been developed for separation and quantitation of midecamycin A₁ and related impurities by high-performance liquid chromatography with evaporative light-scattering detection (ELSD). Chromatographic conditions included use of a Diamonsil C₁₈ column; the mobile phase was 52:48 acetonitrile −0.2 mol L⁻¹ ammonium formate solution (adjusted to pH 7.3 with triethylamine) at a flow rate of 1 mL min⁻¹. The column temperature was 35°C, the shift tube temperature of the ELSD was 105°C, and the gas flow rate of the ELSD was 3.0 L min⁻¹. The response factors of midecamycins in HPLC-ELSD were the same; the linear equation wasy=599292.44x+2868618.04,r=0.9979, the linear range was 5–80 μg,RSD=0.21–1.54%, and theLOD andLOQ were 0.36 and 1.2 μg, respectively. The method was simple, quick, and precise and could be used to determine midecamycin and its related impurities directly.     

Electrochemical behavior and determination of epinephrine at a mercaptoacetic acid self-assembled gold electrode

The electrochemical behavior of epinephrine (EP) at a mercaptoacetic acid (MAA) self-assembled monolayer modified gold electrode was studied. The MAA/Au electrode is demonstrated to promote the electrochemical response of epinephrine by cyclic voltammetry. The possible reaction mechanism is also discussed. The diffusion coefficient D of EP is 6.85 × 10⁻⁶ cm² s⁻¹. In 0.1 mol L⁻¹ phosphate buffer (pH 7.20), a sensitive oxidation peak was observed at 0.177 V, and the peak current is proportional to the concentration of EP in the range of 1.0 × 10⁻⁵–2.0 × 10⁻⁴ mol L⁻¹ and 1.0 × 10⁻⁷–1.0 × 10⁻⁶ mol L⁻¹. The detection limit is 5 × 10⁻⁸ mol L⁻¹. The modified electrode is highly stable and can be applied to the determination of EP in practical injection samples. The method is simple, quick, sensitive and accurate.     

Simultaneous determination of the isomers of nitrophthalic acid by differential pulse polarography

A differential pulse polarographic method has been developed for simulataneous determination of isomers of nitrophthalic acid. In ammonia buffer (1.0 M), the peak potentials for the reduction of 4-and 3-nitrophthalic acids are ?0.54 and 0.67 V vs. SCE, respectively. Response of peak current vs. concentration of each isomer is linear over three orders of magnitude change in concentration. The detection limit for both 4-and 3-nitrophthalic acid is 0.2 mg l^?1. A typical sample can be analyzed for both isomers of nitrophthalic acid in less than 15 min.     

Simultaneous determination of phenylenediamine isomers and dihydroxybenzene isomers in hair dyes by capillary zone electrophoresis coupled with amperometric detection

The simultaneous determination of three isomers of phenylenediamines (o, m, and p-phenylenediamine) and two isomers of dihydroxybenzenes (catechol and resorcinol) in hair dyes was performed by capillary zone electrophoresis coupled with amperometric detection (CZE–AD). The effects of working electrode potential, pH and concentration of running buffer, separation voltage, and injection time on CZE–AD were investigated. Under the optimum conditions the five analytes could be perfectly separated in 0.30 mol L⁻¹ borate–0.40 mol L⁻¹ phosphate buffer (pH 5.8) within 15 min. A 300 μm diameter platinum electrode had good responses at +0.85 V (versus SCE) for the five analytes. Their linear ranges were from 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol L⁻¹ and the detection limits were as low as 10⁻⁷ mol L⁻¹ (S/N = 3). This working electrode was successfully used to analyze eight kinds of hair dye sample with recoveries in the range 91.0–108.0% and RSDs less than 5.0%. These results demonstrated that capillary zone electrophoresis coupled with electrochemical detection using a platinum working electrode as detector was convenient, highly sensitive, highly repeatable and could be used in the rapid determination of practical samples. Figure Electropherograms obtained from 10 mg mL⁻¹ hair dye sample solutions at a platinum working electrode under optimum CZE–AD conditions: (a) natural black (I), (b) golden: (1) p-phenylenediamine, (2) m-phenylenediamine, (3) o-phenylenediamine, (4) resorcinol, and (5) catechol