Comprehensive two-dimensional gas chromatography using a high-temperature phosphonium ionic liquid column

A high-temperature ionic liquid, trihexyl(tetradecyl)phosphonium bis(trifluoromethane)sulfonamide, was used as the primary column stationary phase for comprehensive two-dimensional gas chromatography (GC × GC). The ionic liquid (IL) column was coupled to a 5% diphenyl/95% dimethyl polysiloxane (HP-5) secondary column. The retention characteristics of the IL column were compared to polyethylene glycol (DB-Wax) and 50% phenyl/50% methyl polysiloxane (HP-50+). A series of homologous compounds that included hydrocarbons, oxygenated organics, and halogenated alkanes were analyzed with each column combination. This comparison showed that the ionic liquid is less polar than DB-Wax but more polar than HP-50+. The most unique feature of the IL × HP-5 column combination is that alkanes, cyclic alkanes, and alkenes eluted in a narrow band in the GC × GC chromatogram; whereas, these compounds occupied a much larger portion of the DB-Wax × HP-5 and the HP-50+ × HP-5 chromatograms. Each column combination was used to analyze diesel fuel. The IL × HP-5 chromatogram displayed narrow bands for three major compound classes in diesel fuel: saturates, monoaromatics, and diaromatics. The IL column was used at temperatures as high as 290 °C for several months without any noticeable changes in column performance.     

Comprehensive two-dimensional gas chromatography in metabolomics

One of the major objectives in metabolomics is the identification of subtle changes in metabolite profiles as affected by genetic or environmental factors. Comprehensive two-dimensional gas chromatography (GC × GC) hyphenated to a fast-acquisition mass spectrometer is a well-established analytical technique to study the composition of complex samples due to its enhanced separation capacity, sensitivity, peak resolution, and reproducibility. This review reports applications of GC × GC to metabolomics studies of sample of different types (biofluid, cells, tissue, bacteria, yeast, plants), and discusses its advantages and limitations.     

液相色谱-毛细管气相色谱/质谱离线联用分析烟草中的挥发性及半挥发性成分

建立了一种用于烟草样品中挥发性、半挥发性成分分析的液相色谱-毛细管气相色谱/质谱(LC-CGC/MS)离线联用方法。研究了LC-CGC/MS的分离机理。LC分析选用氨基分析柱(250 mm×2.0 mm, 5 μm)作为分析柱,正己烷-二氯甲烷-乙腈(90:6.6:3.4, v/v/v)作为流动相,对挥发性、半挥发性成分进行分离,收集得到5个馏分,并存放在5个氮吹瓶中。多次进样并收集相同时间段的馏分,氮吹浓缩至1 mL,然后分别进行CGC/MS分析,所用的CGC柱为DB-5MS(60 m×0.25 mm×0.25 μm)。结果显示,与直接采用CGC/MS分析相比,采用LC-CGC/MS分析复杂样本的效果更好,定性的可靠性更高。     

Comprehensive two-dimensional gas chromatography using liquid nitrogen modulation: set-up and applications

An improved modulation system for comprehensive two-dimensional gas chromatography (GC x GC) is presented. It is based on two-jet modulation with liquid nitrogen as cryogen. A valve system was designed to include subsequent re-heating of cooled capillary segments after modulation. It is demonstrated that even volatile components, such as propane or butane, are easily modulated with this system. Thus, the temperature range for GC x GC operation compared to diaphragm valve or liquid CO2 modulation is extended. The system allows highly efficient analysis of volatile and non-volatile components. Applications include separations of alkenes and gasoline samples. Also sulfur-containing hydrocarbon samples were compared via GC x GC and differences among samples of different producers were observed. Finally, headspace GC x GC investigations of volatiles found in polymer latex-coated papers round out the increasing portfolio of valuable applications.     

Comprehensive two-dimensional gas chromatography in stop-flow mode

The theory and proof of concept of a new mode of operation for comprehensive two-dimensional gas chromatography (GC x GC) is presented. In current GC x GC interface designs, the modulation period defines the separation time allowed in the second dimension. In the stop-flow GC x GC mode, flow in the primary column is periodically stopped for brief periods of time. Consequently, the modulation period for the primary column and the amount of time available for second dimension separation become independent variables. This allows the separations in both the primary and secondary dimensions of the GC x GC system to be carried out under more optimised conditions, allowing extended periods of time for second dimension separations without sacrificing the separation in the primary dimension. This new technique has the potential to offer increased separation power and overall resolution as it is further developed.     

Analysis of fresh Mentha haplocalyx volatile components by comprehensive two-dimensional gas chromatography and high-resolution time-of-flight mass spectrometry

Fresh Mentha haplocalyx is a well known traditional Chinese medicinal material (CMM) used in both China and America. This paper reports analysis of the volatile components of fresh Mentha haplocalyx by comprehensive two-dimensional gas chromatography (GCxGC) and high-resolution time-of-flight mass spectrometry (HR-TOF-MS), a combination that provides almost complete chemical separation with elemental composition determination of analytes. 163 ketones and terpenes, including menthol and menthone, were tentatively identified, including enantiomers. This study suggests that GCxGCxHR-TOF-MS is suitable for routine identification of target compounds and enantiomers in CMM.     

Comprehensive two-dimensional gas chromatography of polybrominated diphenyl ethers

Comprehensive two-dimensional gas chromatography with micro electron-capture detection (GCxGC-muECD) was evaluated for the separation of 125 polybrominated diphenyl ethers (PBDEs). From among the six column combinations that were evaluated, DB-1x007-65HT was found to be the most suitable because of: (i) the highest number of BDE congeners separated; (ii) the least decomposition of higher brominated congeners; and (iii) the most suitable maximum operating temperature. The separation of the 125 BDE congeners from five hydroxy- and two methoxy-BDEs and nine other brominated flame retardants (polybrominated biphenyls, tetrabromobisphenol-A, methyl-tetrabromobisphenol-A and hexabromocyclododecane) was also studied. Fluorinated BDEs were found to be valuable internal standards for the determination of BDEs because of their very similar physico-chemical properties and excellent separation from the parent BDEs, mainly in the second dimension. GCxGC-time-of-flight MS and GCxGC-muECD were shown to be useful tools to identify decomposition products of nona- and deca-substituted BDEs, which are formed during the GC run. Three nona-BDEs were shown to be the major decomposition products of BDE 209.     

Comprehensive two-dimensional gas chromatography: a powerful and versatile analytical tool

Comprehensive two-dimensional gas chromatography (GC×GC) is a novel technique which is rapidly gaining importance for the analysis of complex samples. In the present review, attention is devoted to the principle and advantages, and main characteristics such as modulation, column combinations, detector requirements and data processing, of the technique. Specifically, GC×GC of a variety of real-life samples is discussed to demonstrate the applicability of the technique, with emphasis on the usefulness of the ordered-structure principle and on the analyte-identification power provided by a combination with time-of-flight mass spectrometric detection.     

Comprehensive two-dimensional gas chromatography of the 209 polychlorinated biphenyls

Comprehensive two-dimensional gas chromatography (GC x GC) of the 209 polychlorinated biphenyls (CBs) was carried out using a longitudinally modulated cryogenic system (LMCS) and liquid carbon dioxide as cryogen. The effluent from a non-polar column was modulated and further separated on either a polar or a shape-selective second-dimension column. Five GC x GC column combinations were evaluated, with DB-XLB as the first column in each case. DB-XLB separates more congeners than any other GC column currently available. When combined with a biscyanopropyl siloxane (SP-2340 or BPX70) or smectic liquid crystal (LC-50) second-dimension column in a GC x GC system many additional CBs can be separated. In total, 176 and 181 of the 209 congeners were separated (Rs = 0.5) on the column combinations DB-XLB/SP-2340 and DB-XLB/LC-50, respectively. Of the 136 CBs present in any Aroclor mixture at concentrations greater than 0.05% (w/w), 126 were resolved using either of these two column combinations. The seven frequently measured CBs 28, 52, 101, 118, 138, 153, 180, and the WHO-PCBs 77, 81, 105, 114, 118, 123, 126, 156. 157, 167, 169 and 189 were all separated from Aroclor CBs on the DB-XLB/LC-50 column set, whereas CBs 118 and 131 coeluted on the DB-XLB/SP-2340 column set. In addition, three technical CB formulations (Aroclors 1232, 1248 and 1260) and a seal blubber sample (Halichoerus grypus) from the Baltic Sea were analyzed. Similar peak patterns were found for Aroclor 1260 and the CBs in the seal blubber, facilitating use of this technical CB formulation to identify the CBs in the blubber by GC x GC. Individual CBs in environmental samples, such as seal blubber, may be identified semi-automatically by matching the samples GC x GC profiles to a template generated using a standard containing all 209 CBs. Using such a template, 64 CBs were identified in the grey seal blubber sample.     

Profiling analysis of volatile compounds from fruits using comprehensive two-dimensional gas chromatography and image processing techniques

An image processing approach originating from the proteomics field has been transferred successfully to the processing of data obtained with comprehensive two-dimensional gas chromatographic separations data. The approach described here has proven to be a useful analytical tool for unbiased pattern comparison or profiling analyses, as demonstrated with the differentiation of volatile patterns (“aroma”) from fruits such as apples, pears, and quince fruit. These volatile patterns were generated by headspace solid phase microextraction coupled to comprehensive two-dimensional gas chromatography (HS-SPME-GC × GC). The data obtained from GC × GC chromatograms were used as contour plots which were then converted to gray-scale images and analyzed utilizing a workflow derived from 2D gel-based proteomics. Run-to-run variations between GC × GC chromatograms, respectively their contour plots, have been compensated by image warping. The GC × GC images were then merged into a fusion image yielding a defined and project-wide spot (peak) consensus pattern. Within detected spot boundaries of this consensus pattern, relative quantities of the volatiles from each GC × GC image have been calculated, resulting in more than 700 gap free volatile profiles over all samples. These profiles have been used for multivariate statistical analysis and allowed clustering of comparable sample origins and prediction of unknown samples. At present state of development, the advantage of using mass spectrometric detection can only be realized by data processing off-line from the identified software packages. However, such information provides a substantial basis for identification of statistically relevant compounds or for a targeted analysis.     

Comprehensive two-dimensional gas chromatography applied to illicit drug analysis

Multidimensional gas chromatography (MDGC), and especially its latest incarnation—comprehensive two-dimensional gas chromatography (GC × GC)—have proved advantageous over and above classic one-dimensional gas chromatography (1D GC) in many areas of analysis by offering improved peak capacity, often enhanced sensitivity and, especially in the case of GC × GC, the unique feature of ‘structured’ chromatograms. This article reviews recent advances in MDGC and GC × GC in drug analysis with special focus on ecstasy, heroin and cocaine profiling. Although 1D GC is still the method of choice for drug profiling in most laboratories because of its simplicity and instrument availability, GC × GC is a tempting proposition for this purpose because of its ability to generate a higher net information content. Effluent refocusing due to the modulation (compression) process, combined with the separation on two ‘orthogonal’ columns, results in more components being well resolved and therefore being analytically and statistically useful to the profile. The spread of the components in the two-dimensional plots is strongly dependent on the extent of retention ‘orthogonality’ (i.e. the extent to which the two phases possess different or independent retention mechanisms towards sample constituents) between the two columns. The benefits of ‘information-driven’ drug profiling, where more points of reference are usually required for sample differentiation, are discussed. In addition, several limitations in application of MDGC in drug profiling, including data acquisition rate, column temperature limit, column phase orthogonality and chiral separation, are considered and discussed. Although the review focuses on the articles published in the last decade, a brief chronological preview of the profiling methods used throughout the last three decades is given.     

Analysis of volatile organic compounds using gas chromatography

The focus of this review is the analysis of volatile organic compounds (VOCs) by gas chromatography (GC) in the field of environmental, food, flavour and fragrance, medical and forensic sciences. New trends in sample injection, separation and detection are covered, including multi-dimensional and high-speed GC. Attention is drawn to a growing interest in quality assessment. From the review, it is clear that it remains a challenge to generate multi-component gaseous standards of VOCs at ppbv and pptv.     

Quantitative analysis of target components by comprehensive two-dimensional gas chromatography

Quantitative analysis using comprehensive two-dimensional (2D) gas chromatography (GC) is still rarely reported. This is largely due to a lack of suitable software. The objective of the present study is to generate quantitative results from a large GC x GC data set, consisting of 32 chromatograms. In this data set, six target components need to be quantified. We compare the results of conventional integration with those obtained using so-called "multiway analysis methods". With regard to accuracy and precision, integration performs slightly better than Parallel Factor (PARAFAC) analysis. In terms of speed and possibilities for automation, multiway methods in general are far superior to traditional integration.     

Comprehensive two-dimensional gas chromatography analysis of high-ethanol containing motor fuels

A comprehensive 2-D GC (GC x GC) instrument equipped with a flow-switching modulator was used to determine the concentration of ethanol and eight other alcohols in a retail pump sample of E85 fuel. E85 is a mixture of ethanol and gasoline where the ethanol concentration can range from 70 to 85 vol%. The increased peak capacity and selectivity generated by GC x GC analysis allowed the alcohols to be fully resolved from the gasoline hydrocarbons. GC x GC analysis was compared to the performance obtained with the standard analytical method for determining ethanol in fuel ethanol (ASTM D5501) and the standard method for determining oxygenate concentrations in gasoline (ASTM D4815). The GC x GC analysis required 14 min while the combined ASTM D5501 and ASTM D4815 analyses required more than 60 min. The ethanol concentration obtained by GC x GC was in excellent agreement with the value obtained by the D5501 method. Poorer agreement was observed between the GC x GC and D4815 concentrations for the other alcohols present in E85. In all cases, the differences could be attributed to deficiencies in the D4815 method that led to coelutions between the alcohols and gasoline hydrocarbons.     

Comprehensive two-dimensional gas chromatography for fast screening of wash oils

Fast screening of wash oils is demonstrated using comprehensive two-dimensional gas chromatography (GCxGC). Wash oils are used in ethylene production plants to minimize compressor fouling. The composition of a wash oil determines its effectiveness in solubilizing heavy hydrocarbons. In particular, the relative amount of 1- and 2-ring aromatics is important. The presence of oxygenates is undesirable because of adverse effects to the process. It is shown that GCxGC is well suited for this application. Species in wash oils are separated and grouped into three bands: a nonpolar aliphatics band, 1- and 2-ring aromatics band, and polyaromatics band. For a given polar secondary column, the spacing between bands in the second dimension can be adjusted in a broad range by selecting a primary column and an oven-temperature-programming rate. Integration of GCxGC peaks is evaluated using a standard GC integration program and a new GCxGC integration program. Consistent results are obtained using both programs for well-separated GCxGC peaks with relative differences for individual peak ranging from 0.04% to 1.6%. Peak responses are integrated by the GCxGC software, and the relative amounts of aromatics content and aliphatics content are estimated by peak response percent with relative standard deviations ranging from 0.15% to 2.8% (n = 3).     

Comprehensive two-dimensional gas chromatography: metrics,potentials, limits

Metrics for evaluation of separation performance of comprehensive two-dimensional gas chromatography (GCxGC) and for quantitative comparison of that performance with similar performance of its 1D (one-dimensional) counterparts are described. The performance improvement can be expressed via reduction in the saturation of a chromatogram or-in the case of the uniform distribution of peaks along the second dimension--via the peak capacity gain due to GCxGC. An order of magnitude peak capacity gain due to the comprehensive GCxGC is possible under optimal conditions. Optimal parameters of the second dimension column as well as the optimal operational conditions for that column and for the modulator in a comprehensive GCxGC are also presented.     

Capillary gas chromatography-mass spectrometry of volatile and semi-volatile compounds of Salvia officinalis

The essential oil and infusion of Salvia officinalis leaves have been widely applied in traditional medicine since ancient times and nowadays subjected to extensive research of their antibacterial, antiviral and cytotoxic properties. This paper shows chemical composition data of S. officinalis leaves essential oil isolated by steam distillation using a Clevenger-type apparatus. Also, the paper presents the chemical content of volatile and semi-volatile compounds of S. officinalis leaves infusion. The volatile and semi-volatile compounds of S. officinalis leaves infusion were isolated by solid-phase extraction (SPE) and liquid-liquid extraction with hexane and dichloromethane. SPE was carried out on 500 mg octadecylsilane (C18) cartridges and elution with dichloromethane. Liquid-liquid extraction was performed with hexane and dichloromethane. The essential oil in dichloromethane and infusion extracts in hexane and dichloromethane were analyzed by gas chromatography coupled with mass spectrometry. The quantitative results obtained by solid-phase extraction and liquid-liquid extraction showed that SPE on C18 performed the highest recovery of the volatile compounds from infusion sample.     

Determination of volatile compounds in Brazilian distilled cachaça by using comprehensive two-dimensional gas chromatography and effects of production pathways

Comprehensive two-dimensional gas chromatography (GC × GC) was applied to the study of cachaça production. Effects of bidistillation, and the use of charcoal filtration in the production of artisan cachaça, as well as the effects of multi-distillation on volatile products in commercial cachaça were investigated. Volatile compounds were collected and concentrated onto a polyacrylate solid-phase microextraction fibre, and analyzed using GC × GC on a non-polar (BPX5)–polar (BP20) column set. More than 100 compounds, comprising various homologous series were tentatively identified using MS library matching and comparison with retention indices. Phthalate organic contamination following the use of ion exchange resin for removal of copper ion was evident. Charcoal successfully removes this contamination product. Prediction of compounds within particular homologous series aids component identification.     

烟草中挥发性、半挥发性酸性成分的分析

烟草中富含有机酸,其中挥发性、半挥发性酸的种类和含量对烟草品质有较大影响。挥发酸含量适宜时,烟气吸味醇和,香气浓郁,清爽润喉,但含量高时,刺激性较大[1]。分析研究烟草中挥发性、半挥发性酸的种类和含量[2,2]对了解各种烟草内在质量有重要意义,对制定卷烟配方有重要指导意义。本文在同时蒸馏萃取处理后,采用选择离子检测(SIM)法对烟草中主要酸性成分进行定量分析,该法可有效排除干扰,并使灵敏度提高1～2个数量级[4],并用标准样品作了回收率试验。该法适合分析烟草中含18(及以下)个碳的一元酸,回收率在80%以上,相对偏差小于2%,线…