流动注射分光光度法研究离子强度对活性炭吸附阴离子染料的影响

利用流动注射分光光度法技术，考察了不同离子强度（NaCl)下，在水溶液中表面带负电的活性炭分别吸附3种阴离子染料的动力学行为．利用固-液相互作用方程，求取了活性炭-染料相互作用能．比较了无机盐中阳离子的种类对吸附影响的差异．结果表明：对于3种阴离子染料，离子强度的增大都起到加速吸附的作用：表现吸附速率常数、活性炭-染料相互作用能与离子强度三者之间存在密切的内在联系：在相同离子强度下，二价阳离子对吸附的加速作用要比一价阳离子的显著，但在同价阳离子之间这种作用的差别较小．     

Adsorption and Surface Properties of Vladipor Cellulose Acetate and Polysulfonamide Membranes

Surface and adsorption characteristics of porous cellulose acetate (UAM) and polysulfonamide (UPM) membranes with pore diameters from 0.015 to 0.1 μm are compared. The specific surface areas of UPM membranes are 130 and 150 cm²/cm², whereas those of UAM membranes vary from 80 to 360 cm²/cm² of the membrane area. The density of negative charges on the pore surface is 5 × 10^{− 8} and about 20 × 10⁻⁸ C/cm² for UAM and UPM membranes, respectively. The adsorption of basic and acidic substances, proteins (cytochrome C and ovalbumin) and dyes (rhodamine 6G and Acid Orange), from aqueous solutions is studied. Far stronger hydrophobic interactions are observed for the UPM than for UAM membranes. The adsorption of basic substances is markedly higher than that of acidic substances because of acidic properties of the membrane surface. The distribution constants for the adsorption of Acid Orange and cytochrome C on the UPM membrane with a pore diameter of 0.1 μm are 50- and 100-fold higher than for the UAM membrane of the same pore diameter and specific surface area. __________ Translated from Kolloidnyi Zhurnal, Vol. 67, No. 6, 2005, pp. 835–838. Original Russian Text Copyright ? 2005 by Khokhlova, Dzyubenko, Berezkin, Bon, Pervov, Shishova, Dubyaga, Mchedlishvili.     

一步法制备聚脲多孔材料及其对染料的吸附

以甲苯二异氰酸酯为单体, 在水和丙酮混合溶剂中不用致孔剂且无需任何高分子改性一步法合成了聚脲多孔材料(PPU), 通过扫描电镜和BET氮气吸附法对其表面形貌和孔参数进行了表征. 以酸品红(AF)溶液模拟染料废水, 对其在PPU上的吸附进行了研究, 讨论了pH、 吸附时间、 AF初始浓度及吸附剂用量对吸附过程的影响, 优化了吸附条件. 结果表明, PPU对染料AF具有优异的吸附效果. PPU在30℃, pH=3时对AF的最大吸附量为44.60 mg/g. PPU对AF的吸附过程更接近于Langmuir等温吸附的单分子层吸附机理. PPU对水溶性染料刚果红(CR)也有很好的吸附能力. 使用水、 乙醇和水混合溶剂以及NaOH水溶液对染料吸附后的解吸附结果表明, 乙醇和水混合溶剂对吸附染料的解吸效率最高, 对2种染料的解吸附都达90%以上. 解吸后PPU的再吸附能力略有下降, 但第三次吸附量仍达到首次吸附的80%以上.     

Protein and Dye Adsorption on Poly(ethylene terephthalate) Nucleopore Membranes Modified with Polymers

Adsorption of basic, neutral, and acidic proteins on poly(ethylene terephthalate) nucleopore membranes was studied as a function of solution pH. Higher adsorption values were observed for basic and neutral proteins and lower, for acidic proteins. The value of pH corresponding to maximal adsorption was somewhat lower than the isoelectric points of proteins, thus suggesting that the adsorption was governed by a combination of ionic and hydrophobic interactions between proteins and the membrane surface. Proteins were adsorbed in an associated form. Membrane surface was modified with poly(ethylene imine) and poly(ethylene glycol). Combined modification of the membranes with these polymers was found to substantially decrease the adsorption of basic and neutral proteins, as well as basic dye and to slightly increase the adsorption of acidic proteins. The modifying coating had a high hydrolytic stability.     

Application of zeolite MCM-22 for basic dye removal from wastewater

MCM-22 was employed as an effective adsorbent for removal of basic dyes including methylene blue, crystal violet, and rhodamine B from aqueous solution. The adsorption kinetics and isotherms were investigated. The adsorption capacity of MCM-22 for three dyes follows an order of MB > CV approximately RB. Kinetic studies indicate that the adsorption follows the pseudo second-order kinetics and the adsorption is a two-step diffusion process with film diffusion dominating the process. The adsorption isotherm can be well fitted by both the Langmuir and the Freundlich models. Thermodynamic calculations suggest that the adsorption of basic dyes on MCM-22 is an endothermic reaction.     

Adsorption of anionic surfactant on porous and non-porous polyethylene terephthalate films

We study the adsorption of anionic surfactant, sodium dodecyl diphenyloxide disulfonate (SDDD) on three types of polyethylene terephthalate substrates from aqueous solutions of SDDD of different concentrations. Neutral electrolyte (KCl) was added to the solutions to vary the ionic strength. The three types of substrates were: (1) original polymer film, (2) etched non-porous film, which was obtained from pristine film by chemical etching and bears negative charge on the surface, (3) etched porous membranes, which were fabricated from pristine film by ion irradiation and subsequent chemical etching. The membranes have negative charge on the flat surface and on the inner pore walls. The comparison of original and etched nonporous films shows that the negative charge on the flat surface has weak effect on adsorption of the anionic surfactant. The comparison of etched non-porous and porous films shows that the SDDD adsorption on the inner walls of pores is much weaker than on flat surface—even in case the pore radius is significantly larger than the Debye length. This “exclusion” effect strongly depends on ionic strength of solution. For the porous films, the effect of the pore size and shape on the anionic surfactant adsorption is presented and discussed.     

羧基化石墨烯对4种离子型染料的吸附脱色

合成的羧基化石墨烯（G-COOH）用FT-IR进行表征,并对G-COOH用于水溶液中甲基紫、中性红、灿烂黄和茜素红4种离子型染料的吸附性能进行了研究。 考察了吸附剂用量、吸附时间、初始浓度以及溶液pH值等条件对吸附效果的影响。 同时,研究了甲基紫染料的脱附性能,结果表明,用NaOH/EtOH混合溶液洗脱甲基紫,洗脱率可达88.2%,洗脱后的G-COOH可再利用。 从热力学角度探讨得出,G-COOH对阳离子染料甲基紫和中性红的吸附行为能够较好的符合Langmuir等温吸附模型,而对阴离子染料灿烂黄和茜素红的吸附行为则能够较好的符合Freundlich等温吸附模型,计算的吸附参数表明,G-COOH对4种染料的吸附过程容易进行。 动力学研究表明,G-COOH对4种离子型染料的吸附行为均能较好的符合准二级吸附模型。 该实验研究表明,在处理染料废水时,G-COOH为相当优异的吸附剂。     

Impedance spectra analysis of thermoresponsive poly(acryloyl‐L‐proline methyl ester) gel membrane in LiCl solution

Impedance spectra analysis of a thermoresponsive poly(acryloyl‐L ‐proline methyl ester) (poly(A‐ProOMe)) hydrogel membranes in an aqueous solution of LiCl was carried out using a simple equivalent model. The hydrogel membrane was synthesized by γ‐radiation‐induced polymerization and crosslinking of A‐ProOMe monomer aqueous solution in a glass‐cast. By means of the impedance spectra analysis, a novel method for the calculation of the ionic conductivity of the hydrogel membranes in LiCl solution was proposed. The calculated ionic conductivity was in agreement with the determined value. In addition, effects of temperature and LiCl concentration on the impedance spectra and ionic conductivity of the gel membrane were analyzed. Results indicated that the impedance spectra analysis is a very useful tool for evaluating the electric properties of gel membranes in an electrolyte solution. The poly (A‐ProOMe) gel membrane in 1.0 M LiCl solution showed a high ionic conductivity of about 0.2 S/cm at 14 °C. The temperature‐dependence of the ionic conductivity was a complex nonlinear form due to the volume phase transition of the thermoresponsive poly(A‐ProOMe) gel membrane, and the volume phase transition temperature appeared to be decreased with the increase in the LiCl concentration. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2843–2851, 2005     

Post‐Synthetic Polymerization of UiO‐66‐NH2 Nanoparticles and Polyurethane Oligomer toward Stand‐Alone Membranes for Dye Removal and Separation

Metal–organic frameworks (MOFs) are widely used as porous materials in the fields of adsorption and separation. However, their practical application is largely hindered by limitations to their processability. Herein, new UiO‐66‐Urea‐based flexible membranes with MOF loadings of 50 ( 1 ), 60 ( 2 ), and 70 wt % ( 3 ) were designed and prepared by post‐synthetic polymerization of UiO‐66‐NH₂ nanoparticles and a polyurethane oligomer under mild conditions. The adsorption behavior of membrane 3 towards four hydrophilic dyes, namely, eosin Y (EY), rhodamine B (RB), malachite green (MG), and methylene blue (MB), in aqueous solution was studied in detail. It exhibits strong adsorption of EY and RB but weak adsorption of MG and MB in aqueous solution. Owing to the selective adsorption of these hydrophilic dyes, membrane 3 can remove EY and RB from aqueous solution and completely separate EY/MB, RB/MG, and RB/MB mixtures in aqueous solution. In addition, the membrane is uniformly textured, easily handled, and can be reused for dye adsorption and separation.     

Adsorption complexes of acridine diaminoderivatives on silica surface

The adsorption of acridine diaminoderivatives on the surface of finely dispersed silica from aqueous solutions is studied in relation to pH, ionic strength, and adsorbate concentration. The stability constants of the surface complexes of acridine derivatives with unionized and dissociated silanol groups of silica are calculated within the framework of the electrostatic model of surface complexation (the basic Stern model). Dimerization of all examined compounds in aqueous solutions is taken into account. It is established that, in the case of acridine dyes (orange and yellow), complexes containing both monomeric and dimeric forms of these compounds are formed on silica surface. The selection in favor of one of the possible sets of the constants, which quantitatively characterize the equilibria of the reactions, results from the analysis of the adsorption isotherms of examined diaminoacridines.     

Adsorption of dyes on activated carbon and graphitic thermal carbon black

The adsorption of a basic dye (Methylene Blue; MB) and an acidic dye (Acid Orange; AO) has been studied on three activated carbons (ACs; FAS, SKD, and BAU) significantly differing in their porous structures and surface concentrations of ion-exchange groups and on graphitic thermal carbon black (GTCB). The effective specific surface area of FAS, SKD, and BAU determined by dye adsorption is, respectively, 60, 50, and 40% of the BET nitrogen adsorption surface area. The MB uptake on ACs and GTCB increases with rising pH, while the AO uptake decreases. Addition of an electrolyte (0.3 M NaCl) virtually does not effect the adsorption of dyes on ACs and GTCB. It is suggested that hydrophobic interactions, and not ionic ones, are the major contributors to the adsorption of dyes on ACs.     

Loading polyelectrolytes onto porous microspheres: impact of molecular and electrochemical parameters

The impact of macromolecule constitution and electrostatic dimensions on the adsorption of cationic model polyelectrolytes (PELs) onto oppositely charged porous microspheres (MSs) suspended in aqueous media is demonstrated. The contour length (L) of the PEL, the chemical structure of the substituents at the ionic group, the ionic strength of the solution (I), and the average pore radius of the microspheres (R) are considered as variable. Adsorption isotherms quantitatively reveal how PEL parameters, MS geometry, and medium characteristics affect the adsorbed amount and surface coverage. Electrostatic exclusion from pores was proved as long as the Debye length (lD) exceeded R, even if L was considerably smaller than the pore diameter. Two charge parameters (CRcalc and CRexp) and the ratio thereof (CR) were derived and served to evaluate the loading process. All three parameters are applicable to two limiting cases, first, adsorption only on the outer surface of the MS and, second, additional adsorption inside the pores. The findings are seen as valuable contributions to basic research in the field of PELs. Precise data, which were not available before, are provided for comparison with theoretical models and simulations. Overall, conclusions from this model system may be useful for technical applications such as surface modification, chromatographic processes, or materials development.     

A simple method for removal of toxic dyes such as Brilliant Green and Acid Red from the aquatic environment using Halloysite nanoclay

This project explains an easy, simple and eco-friendly method to remove some toxic dyes like Brilliant Green and Acid Red from aquatic solution by technique of solid-phase extraction that uses Halloysite nanoclay eco-friendly solid phase as absorbent surface for adsorption of dye. The physical properties of the HNC such as scanning electron microscopy, transmission electron microscope, X-ray diffraction, Fourier transform infrared spectroscopy, and surface area analysis were studied. The best conditions like pH of the solution, HNC weight, contact shaking time, the temperature of the solution, and ionic strength were investigated for removal effectiveness. The experimental data of the adsorption process showed that HNC can remove most of the dyes within 30 min, with an adsorption capacity of 12.5 mg/g for A.R dye and 13.9 mg/g for B.G dye on HNC solid phase at optimum conditions. The removal process of dyes on HNC was studied kinetically and thermodynamically, and the data confirms that the pseudo-second-order kinetic model was able to describe the adsorption process. Thermodynamic data confirms the process was spontaneous andexothermic in nature for A.R dye, while was spontaneous and endothermic in nature for B.G dye. Finally, the effectiveness of HNC was inspected by removing dyes from three various real samples, and the results showed high performance in removing dyes on HNC for four consecutive cycles.     

Kinetic and calorimetric study of the adsorption of dyes on mesoporous activated carbon prepared from coconut coir dust

Mesoporous activated carbon has been prepared from coconut coir dust as support for adsorption of some model dye molecules from aqueous solutions. The methylene blue (MB) and remazol yellow (RY) molecules were chosen for study of the adsorption capacity of cationic and anionic dyes onto prepared activated carbon. The adsorption kinetics was studied with the Lagergren first- and pseudo-second-order kinetic models as well as the intraparticle diffusion model. The results for both dyes suggested a multimechanism sorption process. The adsorption mechanisms in the systems dyes/AC follow pseudo-second-order kinetics with a significant contribution of intraparticle diffusion. The samples simultaneously present acidic and basic sites able to act as anchoring sites for basic and acidic dyes, respectively. Calorimetric studies reveal that dyes/AC interaction forces are correlated with the pH of the solution, which can be related to the charge distribution on the AC surface. These AC samples also exhibited very short equilibrium times for the adsorption of both dyes, which is an economically favorable requisite for the activated carbon described in this work, in addition to the local abundance of the raw material.     

Body temperature-responsive gels derived from hydroxypropylcellulose bearing lignin II: adsorption and release behavior

The lower critical solution temperature (LCST) of hydroxypropylcellulose bearing lignin (HPC-L) prepared from unbleached pulp depends on the amount of residual lignin. An HPC-L gel having thermal properties reflective of original HPC-L was prepared using ethyleneglycol diglycidylether as a crosslinker, as previously reported [Uraki et al. (2004) Carbohydr. Polym. 58:123–130], and the volume transition temperature was detected as an endothermic peak by differential scanning calorimetry (DSC). The adsorption and release behavior of the guest molecules to/from this gel was then examined. When the adsorption of cationic and anionic guests was compared, cationic methylene blue (MB) was adsorbed in larger amounts than anionic methyl orange (MO). In addition, MB adsorption into the HPC-L gel was greater than MB adsorption into the HPC gel prepared from commercially available HPC. This suggests that residual lignin affects the adsorption of organic dyes. Significant differences were not observed with respect to the release of MB from HPC-L at 38 °C and lower temperatures. In the adsorption of surfactants, marked adsorption at around the critical micelle concentration of the ionic surfactants and gel swelling were observed. Such swelling did not occur in the aqueous nonionic surfactant solution, although the nonionic surfactant was adsorbed into the gel. Gel swelling may have been caused by the electrostatic repulsion of the ionic surfactants adsorbed onto the polymer chains within the gel structure.     

Effective removal of anionic dyes from aqueous solutions by novel polyethylenimine-ozone oxidized hydrochar (PEI-OzHC) adsorbent

The adsorption behavior of the anionic dyes Remazol Brilliant Blue R (RBBR) and Reactive Black 5 (RB5) from aqueous solutions by polyethylenimine ozone oxidized hydrochar (PEI-OzHC) was investigated. The adsorption capacities of both dyes increased with functionalization of PEI in the hydrochar adsorbent. The results of surface characterization (FTIR, BET, TGA, elemental analysis, and SEM) showed that PEI modification greatly enhanced the adsorbent surface chemistry with a slight improvement of adsorbent textural properties. In addition, the adsorption kinetics data showed an excellent adsorption efficiency as reflected in the high removal percentages of the anionic dyes. The Isotherm results indicated that RBBR and RB5 dye adsorption occurred via monolayer adsorption, and chemisorption was the rate-controlling step. The PEI-OzHC adsorbent possesses higher maximum Langmuir adsorption capacity towards RBBR (218.3 mg/g) than RB5 (182.7 mg/g). This increase in adsorption capacity is attributed to the higher number of functional groups in RBBR that interact with the adsorbent. This study reveals the potential use of adsorbents derived from pine wood hydrochar in municipal as well as industrial wastewater treatment. Furthermore, surface chemistry modification is proven as an effective strategy to enhance the performance of biomass-derived adsorbents.     

Interaction of Thiacarbocyanine Polymethine Dyes with the Surface of Silver Bromide Sols

A number of thiacarbocyanine polymethine dyes before and after adsorption on the surface of AgBr grains was studied by the method of X-ray photoelectron spectroscopy. The mechanism of adsorption of thiacarbocyanine dyes was found to consist in the formation of bonds between sulfur atoms of heterocyclic rings of the dyes and atoms of the substrate. Adsorption of spectral sensitizers was shown to change the electronic state of dye molecules and the composition of the AgBr surface.__________Translated from Khimiya Vysokikh Energii, Vol. 39, No. 5, 2005, pp. 367–372.Original Russian Text Copyright © 2005 by Guzenko, Yudin, Yatsyna, Kolesnikov.     

Adsorptive removal of La(III) from aqueous solutions with 8-hydroxyquinoline immobilized GMZ bentonite

Due to the low permeability, high swelling capacity and good retardation properties, bentonite has been considered as the main component of buffer/backfill material for high level radioactive wastes repository all over the world. The adsorptions of metal ion were widely investigated recently. In this presentation, we provide an easy-to-use method to immobilize 8-hydroxyquinoline onto the surface of bentonite for the use of adsorption studies of La(III) from the aqueous solution. The effects of various parameters such as contact time, pH of the solution, ionic strength and metal ion concentration on the adsorption were investigated by the batch experiments. The biggest adsorption capacity is 41.7 mg/g, higher than the value reported by our previous work which is performed by the raw bentonite. Langmuir isotherm fits the experimental data well and the adsorption follows pseudo-second-order kinetic model. In summary, 8-hydroxyquinoline immobilized GMZ bentonite is an effective adsorbent for the removal of La(III) from aqueous solutions.     

Impact of environmental conditions on the adsorption behavior of radionuclide Ni(II) onto hematite

In this work, adsorption of Ni(II) from aqueous solution onto hematite under various solution chemistry and temperature was investigated. The results indicated that the pseudo-second-order rate equation fitted the kinetic adsorption well. The adsorption of Ni(II) onto hematite was strongly dependent on pH and ionic strength. At low pH, the adsorption was dominated by outer-sphere surface complexation or ion exchange, whereas inner-sphere surface complexation was the main adsorption mechanism at high pH. A positive effect of FA on Ni(II) adsorption was found at pH < 8.0, whereas a negative effect was observed at pH > 8.0. The Langmuir, Freundlich, and D–R models were applied to simulate the adsorption isotherms at three different temperatures of 293.15, 313.15 and 333.15 K. The thermodynamic parameters were calculated from the temperature dependent adsorption, and the results indicated that the adsorption was endothermic and spontaneous.     

Adsorptive removal of U(VI) and Th(IV) from aqueous solutions using polymer-based electrospun PEO/PLLA fibrous membranes

Fibrous membranes based on poly(ethylene oxide) and poly(l-lactide) fabricated by electrospinning were evaluated for the first time as substrates for the adsorption of tetravalent thorium (Th(IV)) and hexavalent uranium (U(VI)) from aqueous media. The membranes consisted of microfibers with diameters of approximately 2 μm as revealed by scanning electron microscopy. The adsorption of Th(IV) and U(VI) on the membrane was investigated as a function of pH, ionic strength and initial metal concentration under normal atmospheric conditions. The experimental data indicated increased affinity of the membrane for Th(IV) and U(VI), which was pH depended and reaches maximum values (>90 %) for Th(IV) and U(VI) at pH 3 and pH 6.5, respectively. The maximum adsorption capacity (q _max) at optimum conditions was evaluated from the Langmuir isotherm and was found to amount 50.08 and 9.3 mmol kg^?1 for Th(IV) and U(VI), respectively. In addition, studies on the effect of ionic strength on the adsorption efficiency did not show any significant effect indicating that the adsorption of Th(IV) and U(VI) on the membrane was most probably based on specific interactions and the formation of inner-sphere surface complexes. The significantly higher adsorption efficiency of the membrane for Th(IV) in acidic media (pH ≤ 3) could be utilized for a pH-triggered, selective separation of Th(IV) from U(VI) from aqueous media.