王老吉广东凉茶颗粒的超高效液相色谱指纹图谱研究

建立了适用于王老吉广东凉茶颗粒质量控制的超高效液相色谱指纹图谱分析方法。样品采用甲醇超声萃取30 min,萃取液用超高效液相色谱法进行指纹图谱分析。色谱柱采用Waters ACQUITY HSS T3 C18(3.0mm×150 mm,1.8μm),以0.5%甲酸-乙腈为流动相进行梯度洗脱,流速为0.8 mL/min,柱温35℃。28个共有峰在18 min内得到良好分离,通过对照品对其中4个峰进行了确证。对王老吉广东凉茶颗粒样品进行了相似度分析,23个批次样品的相似度均达到0.95以上;以28个共有峰的相对峰面积进行主成分分析,23批次样品均落在同一区域。相似度评价和主成分分析结果均表明,王老吉广东凉茶颗粒的产品质量稳定性好。该方法快速、高效、稳定,可用于王老吉广东凉茶颗粒的质量控制。     

连花清瘟颗粒有效成分提取及高效液相色谱指纹图谱分析北大核心CSCD

建立连花清瘟颗粒的高效液相色谱(HPLC)指纹图谱,确认其化学成分并结合化学模式识别技术对其进行系统、科学的质量评价。使用化学对照品比对分析和超高效液相色谱-飞行时间质谱(UPLC-Q-TOF-MS)进行定性鉴定;Swell Chromplus TM-C18色谱柱(150 mm×4.6 mm,5μm);以0.1%磷酸-乙腈流动相,梯度洗脱;检测波长278 nm,进行高效液相色谱(HPLC)。采用中药色谱指纹图谱相似度评价系统及聚类分析、主成分分析分析软件进行化学模式识别方法分析。结果表明,通过指纹图谱相似度计算发现,10批样品的HPLC指纹图谱中发现16个共有峰,相似度达到0.967。确认了9个化学成分,包括新绿原酸、绿原酸、隐绿原酸、异绿原酸A、苦杏仁苷、连翘苷、连翘酯苷A、大黄素、大黄酚、大黄酸。该方法简单、稳定、重复性好,可用于该药物的质量评价。     

基于水溶性浸出物及HPLC指纹图谱评价不同贮存年限半夏的品质

研究不同贮存年限半夏药材的浸出物,建立浸出物的HPLC特征指纹图谱,为半夏药材品质评控提供参考。浸出物测定方法采用药典法;HPLC指纹图谱的色谱条件:采用C_(18)色谱柱(150 mm×4.6 mm,5μm),以水–甲醇为流动相,梯度洗脱,流量为0.8 m L/min,检测波长为260 nm,柱温为25℃,进样体积为50μL。采用相似度评价及聚类分析技术揭示14批样品的相似性及差异性。14批半夏浸出物有12批合格,2批不合格。建立14批半夏浸出物样品的高效液相指纹图谱,确定了3个共有峰,共有峰保留时间的相对标准偏差小于2%,峰面积的相对标准偏差差异较大。1~#~7~#半夏样品有12个共有峰,共有峰保留时间的相对标准偏差小于1.5%,峰面积的相对标准偏差差异较大。各批次药材化学成分组成及含量均存在一定差异。以半夏浸出物数据与其高效液相色谱指纹图谱数据为基础,将指纹图谱相似度评价与聚类分析结合起来,用浸出物含量及评价软件测评结果对半夏品质进行综合评估,可以更精确地对半夏药材进行质量控制。     

五加生化胶囊的高效液相色谱指纹图谱研究

应用高效液相色谱(HPLC)法建立五加生化胶囊的指纹图谱。采用ANGLAVenusil XBP-C18色谱柱(250×4.6mm,5μm),以甲醇-0.1%磷酸溶液为流动相,梯度洗脱,检测波长为327nm,五加生化胶囊多数峰达到基线分离。采用2004A中药色谱指纹图谱相似度评价系统对11批样品的指纹图谱进行峰匹配,确定12个共有峰,11批五加生化胶囊指纹图谱的相似度均在0.90以上。结果表明:五加生化胶囊的HPLC指纹图谱特征性和专属性强,可较系统地用于五加生化胶囊的质量控制。     

复方板蓝根颗粒抗病毒成分HPLC-UV指纹图谱及LC-ESI-MSn研究

建立了复方板蓝根颗粒提取物高效液相色谱(HPLC-UV)指纹图谱分析方法. 确定了10批不同来源复方板蓝根颗粒提取物的19个共有峰. 各提取物的HPLC-UV指纹图谱与对照指纹图谱比较, 相似度均在93%以上. 利用液相色谱与质谱联用(LC-ESI-MSⁿ)技术对主要共有峰的结构进行了鉴定. 药效学研究表明, 复方板蓝根颗粒提取物有抗病毒活性. 该指纹图谱精密度、稳定性和重现性良好, 可作为复方板蓝根颗粒的质量评价方法.     

基于超高效液相色谱-质谱红花药材指纹图谱的建立

以红花为研究对象，建立超高效液相色谱-质谱（UPLC-MS）指纹图谱分析方法，为红花药材质量鉴别提供借鉴.通过考察检测波长、梯度洗脱条件、提取溶剂、提取方法等因素，在最优条件下对20个产地的红花样品进行分离分析.色谱柱：Thermo Hypersil Gold C₁₈，100 mm×2.1 mm，1.9 μm，流动相：0.1%甲酸水溶液（A）-乙腈（B）；流速：0.3 mL/min；柱温：30℃；检测波长：270 nm；进样量：2 μL，质谱条件：鞘气流速：45 arb，辅助气流速15 arb，雾化电压：3.3 KV，离子传输管温度：350℃，辅助气加热温度：400℃.试验结果：共确定了67个共有峰，通过UPLC-MS指认了其中11个共有峰，对20批不同产地的红花药材指纹图谱进行了相似度评价，其相似度在0.687~0.971之间.建立的UPLC-MS指纹图谱可为红花药材的质量控制提供参考依据.     

基于HPLC指纹图谱和化学模式识别的关节痛消颗粒的质量评价研究

采用HPLC法建立关节痛消颗粒的指纹图谱用于其质量评价。采用Welch C18色谱柱(4.6 mm×250 mm, 5μm),流动相为乙腈-0.1%磷酸水溶液,梯度洗脱,流速0.8 mL·min^-1,柱温35℃,检测波长为330nm,对建立指纹图谱的主要特征峰进行标定,采用相似度软件,结合系统聚类分析(HCA)、主成分分析(PCA)和SIMCA 13.0软件进行偏最小二乘法-判别分析(PLS-DA),分析制剂中化学指纹信息。建立了专属性、精密度、重复性和稳定性均良好的关节痛消颗粒HPLC指纹图谱,15批制剂的指纹图谱相似度为均大于0.9,确定共有峰为15个,共有4个主要特征峰得到明确的化学指认,其中已标定的色谱峰11(淫羊藿苷)、7(松果菊苷)、4(肉桂酸)是影响样品质量的标志性差异物质。通过HPLC指纹图谱和化学模式识别可较好的辨识关节痛消颗粒的标志性成分,为其质量标志物的辨识提供了参考。     

布渣叶药材中黄酮的高效液相色谱指纹图谱分析

建立了布渣叶药材中黄酮类化合物的高效液相色谱指纹图谱。在高效液相色谱分析中采用Kromasil C18色谱柱(250 mm×4.6 mm,5μm)作固定相及以同比例混合的甲醇和稀磷酸溶液(0.1+99.9)的混合溶液作流动相进行梯度淋洗实现各化合物的分离,加入牡荆苷作内标,在276 nm波长处作紫外检测。应用所提出的方法分析了取自全国9个不同产地的上述药材的样品。在所得的高效液相色谱指纹图谱上显示了9个样品的黄酮类化合物的18个色谱峰。此18个色谱峰的相对保留时间和相对峰面积的数据间具有很好的相似度,结果表明:所建立的指纹图谱可用于此类药材的质量控制。     

多波长自动融合指纹图谱策略及其在蜂胶质量评价中的应用

提出了一种简化数据处理过程的多波长自动融合指纹图谱策略,并应用于蜂胶乙醇提取物的质量评价。运用超高效液相色谱（UPLC）技术对5个厂家的15批蜂胶乙醇提取物进行220、245、270、320 nm的多波长检测。样品采用Agilent Poroshell 120 EC-C18(3 mm×100 mm,2.7μm)色谱柱进行分离;以甲醇-0.2%磷酸水溶液为流动相进行梯度洗脱。利用“中药色谱指纹图谱相似度评价系统”进行全峰匹配,实现了每个样品多个波长下各色谱峰数据的自动融合。以270 nm单波长为对照,比较其与多波长融合在共有色谱峰、相似度评价、聚类分析、主成分分析方面的差异。蜂胶多波长融合指纹图谱包含33个特征峰,其中14个特征峰可定性,分别为咖啡酸、ρ-香豆酸、阿魏酸、异阿魏酸、3,4-二甲氧基肉桂酸、肉桂酸、槲皮素、山奈素、芹菜素、异鼠李素、乔松素、白杨素、高良姜素、咖啡酸苯乙酯。各批次特征峰保留时间的相对标准偏差（RSD）均小于1.00%,峰面积RSD为14.39%～112.02%,平均值为37.94%。15批蜂胶融合指纹图谱的相似度为0.902～0.994,主成分分析、聚类分析均...     

仿刺参中皂苷类成分的高效液相色谱指纹图谱

利用高效液相色谱法建立了仿刺参皂苷类成分的指纹图谱,为仿刺参的质量控制提供了新的方法。采用固相萃取制备供试品溶液,选用Zorbox SB-C18色谱柱(250 mm×4.6 mm, 5 μm),以乙腈-0.1%磷酸水溶液为流动相进行梯度洗脱,检测波长为205 nm,柱温30 ℃。分析了不同产地的10批仿刺参样品,采用国家药典委员会推荐的“中药色谱指纹图谱相似度评价系统(2004 A版)”处理谱图,确定了6个共有峰。计算了10个样本间的指纹图谱相似度,所得相似度计算结果均大于0.97。该方法具有良好的稳定性和重现性,可用于仿刺参的质量控制。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.