Phosphido pincer complexes of platinum: synthesis, structure and reactivity

A series of platinum(II) complexes supported by the tridentate bis(phosphine)phosphido ligand bis(2-diisopropylphosphinophenyl)phosphide) [(i)Pr-PPP] have been synthesized and characterized (1-4). X-Ray structural studies of [(i)Pr-PPP]PtCl (1) and [(i)Pr-PPP]PtCH(3) (3) complexes show meridional [(i)Pr-PPP] ligands around approximately square-planar platinum centers. Structural data and NMR analysis highlight a strong trans influence for the phosphido phosphorous donor, comparable to that of the anionic aryl carbon of the classic PCP pincer complexes. A series of thermally stable [PPP]Pt(IV) compounds, including [PPP]Pt(CH(3))(2)X [X = I (5) and SbF(6) (6)], were also synthesized. The study of the binding affinity of SO(2) and NO to complex 1 has also been addressed.     

Aryl-substituted dithiafulvenes: synthesis,electronic properties,and redox reactivity

A series of aryl-substituted dithiafulvenes (DTFs) has been synthesized and characterized by single crystal X-ray diffraction analysis, UV–Vis absorption spectroscopy, and cyclic voltammetry. The studies indicate that the aryl-substituents not only affect the structures and electronic properties of the DTF derivatives, but also impose significant impact on their stability and reactivity when oxidized into radical cations.     

(Fluoren-9-ylidene)methanedithiolato complexes of platinum: synthesis, reactivity, and luminescence

Platinum(II) complexes with (fluoren-9-ylidene)methanedithiolato and its 2,7-di-tert-butyl- and 2,7-dimethoxy-substituted analogues were obtained by reacting different chloroplatinum(II) precursors with the piperidinium dithioates (pipH)[(2,7-R2C12H6)CHCS2] [R = H (1a), t-Bu (1b), or OMe (1c)] in the presence of piperidine. The anionic complexes Q2[Pt{S(2)C=C(C12H6R(2)-2,7)}2] [R = H, (Pr(4)N)(2)2a; R = t-Bu, (Pr4N)(2)2b, (Et4N)(2)2b; R = OMe, (Pr4N)(2)2c] were prepared from PtCl(2), piperidine, the corresponding QCl salt, and 1a-c in molar ratio 1:2:2:2. In the absence of QCl, the complexes (pipH)(2)2b and [Pt(pip)(4)]2b were isolated depending on the PtCl(2):pip molar ratio. The neutral complexes [Pt{S2C=C(C12H6R(2)-2,7)L(2)] [L = PPh(3), R = H (3a), t-Bu (3b), OMe (3c); L = PEt(3), R = H (4a), t-Bu (4b), OMe (4c); L(2) = dbbpy, R = H (5a), t-Bu (5b), OMe (5c) (dbbpy = 4,4'-di-tert-butyl-2,2'-bipyridyl)] were similarly prepared from the corresponding precursors [PtCl2L2] and 1a-c in the presence of piperidine. Oxidation of Q(2)2b with [FeCp2]PF6 afforded the mixed Pt(II)-Pt(IV) complex Q2[Pt2{S2C=C[C12H6(t-Bu)(2)-2,7]}4] (Q(2)6, Q = Et4N+, Pr4N+). The protonation of (Pr4N)(2)2b with 2 equiv of triflic acid gave the neutral dithioato complex [Pt2{S2CCH[C12H6(t-Bu)(2)-2,7]}4] (7). The same reaction in 1:1 molar ratio gave the mixed dithiolato/dithioato complex Pr4N[Pt{S2C=C[C12H6(t-Bu)(2)-2,7]}{S2CCH[C12H6(t-Bu)(2)-2,7]}] (Pr(4)N8) while the corresponding DMANH+ salt was obtained by treating 7 with 2 equiv of 1,8-bis(dimethylamino)naphthalene (DMAN). The crystal structures of 3b and 5c.CH2Cl2 have been solved by X-ray crystallography. All the platinum complexes are photoluminescent at 77 K in CH2Cl2 or KBr matrix, except for Q(2)6. Compounds 5a-c and Q8 show room-temperature luminescence in fluid solution. The electronic absorption and emission spectra of the dithiolato complexes reveal charge-transfer absorption and emission energies which are significantly lower than those of analogous platinum complexes with previously described 1,1-ethylenedithiolato ligands and in most cases compare well to those of 1,2-dithiolene complexes.     

Highly luminescent half-lantern cyclometalated platinum(II) complex: synthesis, structure, luminescence studies, and reactivity

The half-lantern compound [{Pt(bzq)(μ-C(7)H(4)NS(2)-κN,S)}(2)]·Me(2)CO (1) was obtained by reaction of equimolar amounts of potassium 2-mercaptobenzothiazolate (KC(7)H(4)NS(2)) and [Pt(bzq)(NCMe)(2)]ClO(4). The Pt(II)···Pt(II) separation in the neutral complex [{Pt(bzq)(μ-C(7)H(4)NS(2)-κN,S)}(2)] is 2.910 (2) ?, this being among the shortest observed in half-lantern divalent platinum complexes. Within the complex, the benzo[h]quinoline (bzq) groups lie in close proximity with most C···C distances being between 3.3 and 3.7 ?, which is indicative of significant π-π interactions. The reaction of 1 with halogens X(2) (X(2) = Cl(2), Br(2), or I(2)) proceeds with a two-electron oxidation to give the corresponding dihalodiplatinum(III) complexes [{Pt(bzq)(μ-C(7)H(4)NS(2)-κN,S)X}(2)] (X = Cl 2, Br 3, I 4). Their X-ray structures confirm the retention of the half-lantern structure and the coordination mode of the bzq and the bridging ligand μ-C(7)H(4)NS(2)-κN,S. The Pt-Pt distances (Pt-Pt = 2.6420(3) ? 2, 2.6435(4) ? 3, 2.6690(3) ? 4) are shorter than that in 1 because of the Pt-Pt bond formation. Time dependent-density functional theory (TD-DFT) studies performed on 1 show a formal bond order of 0 between the metal atoms, with the 6p(z) contribution diminishing the antibonding character of the highest occupied molecular orbital (HOMO) and being responsible for an attractive intermetallic interaction. A shortening of the Pt-Pt distance from 2.959 ? in the ground state S(0) to 2.760 ? in the optimized first excited state (T(1)) is consistent with an increase in the Pt-Pt bond order to 0.5. In agreement with TD-DFT calculations, the intense, structureless, red emission of 1 in the solid state and in solution can be mainly attributed to triplet metal-metal-to-ligand charge transfer ((3)MMLCT) [dσ*(Pt-Pt) → π*(bzq)] excited states. The high quantum yields of this emission measured in toluene (44%) and solid state (62%) at room temperature indicate that 1 is a very efficient and stable (3)MMLCT emitter, even in solution. The high luminescence quantum yield of its red emission, added to its neutral character and the thermal stability of 1, make it a potential compound to be incorporated as phosphorescent dopant in multilayer organic light-emitting devices (OLEDs).     

Tetrahedranyllithium: synthesis, characterization, and reactivity

The first representative of stable tetrahedranyl anion, tris(trimethylsilyl)tetrahedranyllithium (3), has been synthesized by the reaction of tetrakis(trimethylsilyl)tetrahedrane (2) with methyllithium in tetrahydrofuran. The structural characterization of the tetrahedranyllithium has been achieved by X-ray crystallography, showing that the structure of 3.(TMEDA)1.5 represents a stretched tetrahedron. The endocyclic C(Li)-C(SiMe3) bond lengths range from 1.5408(15) to 1.5441(15) A (av 1.5425(15) A), and are longer than the endocyclic C(SiMe3)-C(SiMe3) bond lengths, which range from 1.4961(15) to 1.5009(15) A (av 1.4986(15) A). Methyl- and hydrogen-substituted tetrahedranes have also been prepared by the reaction of 3 with dimethyl sulfate and cyclopentadiene, respectively.     

Stannaborate transition metal chemistry: ligand properties, reactivity, and density functional theory calculations of platinum and palladium complexes

Three stannaborate complexes of platinum(II) and a novel stannoborate palladium(II) derivative have been prepared in excellent yield. The tin transition metal bond is formed through nucleophilic substitution and the resulting complexes [Bu3MeN] [trans-[(Et3P)2Pt(SnB11H11)H]] (6), [trans-[(Et3P)2Pt(SnB11H11)(CNtBu)]] (7), [Bu3MeN]2[trans-[(Et3P)2Pt(SnB11H11)2-(CNtBu)]] (8), and [Bu3MeN][(dppe)-Pd(SnB11H11)Me] (12) (dppe = 1,2-bis-(diphenylphosphanyl)ethane) were characterized by NMR spectroscopy and elemental analysis. In the cases of the zwitterion 7, the pentacoordinated complex 9, the palladium salt 12 and [(triphos)Pt(SnB11H11)] (10) (triphos = 1,1,1-tris(diphenylphosphanylmethyl)ethane), their solid-state structures are determined by X-ray crystal structure analyses. The trans influence of the [SnB11H11] ligand is evaluated from the results of the IR spectroscopy and X-ray crystallographic structures of complexes 6, 7, and 12. The dipole moment of the zwitterion 7 is calculated by density functional theory (DFT) methods. The alignment of the dipole moments of the polar molecules 7 and 12 in the solid state is discussed.     

Odd-numbered Fe(III) complexes: synthesis, molecular structure, reactivity, and magnetic properties

Three isostructural disklike heptanuclear FeIII compounds of the general formula [FeIII7(mu3-O)3(L)3(mu-O2CCMe3)6(eta1-O2CCMe3)3(H2O)3], where L represents a di- or triethanolamine moiety, display a three-blade propeller topology, with the central Fe atom representing the axle or axis of the propeller. This motif corresponds to the theoretical model of a frustrated Heisenberg star, which is one of the very few solvable models in the area of frustrated quantum-spin systems and can, furthermore, be converted to an octanuclear cage for the case where L is triethanolamine to give [FeIII8(mu4O)3(mu4-tea)(teaH)3(O2CCMe3)6(N3)3].1/2MeCN.1/2H2O or [FeIII8(mu4O)3(mu4-tea)(teaH)3(O2CCMe3)6(SCN)3].2MeCN when treated with excess NaN3 or NH4SCN, respectively. The core structure is formally derived from that of the heptanuclear compounds by the replacement of the three aqua ligands by an {Fe(tea)} moiety, so that the 3-fold axis of the propeller is now defined by two central FeIII atoms. Magnetic studies on two of the heptanulcear compounds established unequivocally S = 5/2 spin ground state for these complexes, consistent with overall antiferromagnetic interactions between the constituent FeIII ions.     

Chemistry of phosphine-borane adducts at platinum centers: synthesis and reactivity of PtII complexes with phosphinoborane ligands

Reaction of [Pt(PEt(3))(3)] with the primary and secondary phosphine-borane adducts PhRPH x BH(3) (R=H, Ph) resulted in oxidative addition of a P-H bond at the Pt(0) center to afford the complexes trans-[PtH(PPhR x BH(3))(PEt(3))(2)] (1: R=H; 2: R=Ph). The products 1 and 2 were characterized by (1)H, (11)B, (13)C, (31)P, and (195)Pt NMR spectroscopy, and the molecular structures were verified by X-ray crystallography. In both cases, a trans arrangement of the hydride ligand with respect to the phosphidoborane ligand was observed. When 2 was treated with PhPH(2) x BH(3), a novel phosphidoborane ligand-exchange reaction occurred which yielded 1 and Ph(2)PH x BH(3). Treatment of 2 with one equivalent of depe (depe=1,2-bis(diethylphosphino)ethane) resulted in the formation of the complex cis-[PtH(PPh(2) x BH(3))(depe)] (3), in which the hydride ligand and the phosphidoborane ligand are in a cis arrangement. Treatment of 3 with PhPH(2) x BH(3) was found to result in an exchange of the phosphidoborane ligands to give the complex cis-[PtH(PPhH x BH(3))(depe)] (4) and Ph(2)PH x BH(3). Complex 4 was found to undergo further reaction in the presence of PhPH(2) x BH(3) to give meso-cis-[Pt(PPhH x BH(3))(2)(depe)] (5) and rac-cis-[Pt(PPhH x BH(3))(2)(depe)] (6).     

Chemistry of boryllithium: synthesis, structure, and reactivity

A series of lithium salts of boryl anion, boryllithiums, were synthesized and characterized by NMR spectroscopy and crystallographic analysis. In addition to the parent boryllithium compound 35a, structural modification of boryllithium, using saturated C-C and benzannulated C=C backbones in the five-membered ring and mesityl groups on the nitrogen atoms, also allowed generation of the corresponding boryllithium. The solid state structures of boryllithium showed that the boron-lithium bond is polarized where the boron atom is anionic in all (35a x DME)(2), 35a x (THF)(2), 35b x (THF)(2), and 35c x (THF)(2) when compared to the structures of hydroborane 38a-c and optimized free boryl anion opt-46a-c. Dissolution of the isolated single crystals of (35a x DME)(2) and 35a x (THF)(2) in THF-d(8) showed that the boron-lithium bond remained in solution and free DME or THF molecules were observed. Temperature-dependent (11)B NMR chemical shift changes of 35a were observed in THF-d(8) or methylcyclohexane-d(14), suggesting a change of chemical shift anisotropy around the boron center. The HOMO of opt-35a x (THF)(2) had a lone pair character on the boron atom, as observed for phenyllithium, whereas the HOMO of hydroborane 38a corresponds to the pi-orbital of the boron-containing five-membered heterocycle. The polarity of the B-Li bond, estimated by AIM analysis, was similar to that of alkyllithium. Boryllithiums 35a and 35b behave as a base or a boron nucleophile in reaction with organic electrophiles via deprotonation, S(N)2-type substitution, halogen-metal exchange or electron-transfer, 1,2-addition to a carbonyl group, and S(N)Ar reaction. In the case of the reaction with CO(2), intramolecular cyclization followed by CO elimination from borylcarboxylate anion and subsequent protonation gave hydroxyboranes 64a and 64b. The characters of the carbonyl groups in the borylcarbonyl compounds 60a, 60b, 61, 62, and 63a, which were obtained from the reaction of boryllithiums 35a and 35b, were investigated by X-ray crystallography, IR, and (13)C NMR spectroscopy to show that the boryl substituent weakened the C=O bond when compared to carbon substituted analogues.     

α-Alkyl(aryl)sulfenyl substituted β-ketophosphonates: synthesis, properties and reactivity

A new synthesis of the title compounds via acylation of α-lithio-α-phosphorylalkyl sulfides is described. Two additional approaches to these compounds, although less efficient, involve: (a) sulfenylation of O-silylated dialkyl β-ketophosphonates and (b) the Arbuzov reaction of triethyl phosphite with α-chloro-α-methylthiomethyl phenyl ketone. The keto-enol tautomerism of the title compounds and reactivity of the anions derived from them with electrophilic reagents were investigated. The P(O)-olefination products obtained from electron rich aromatic aldehydes were found to undergo the acid-catalyzed desulfenylation reaction affording α,β-unsaturated ketones.     

Complexes of platinum(II) containing ferrocenylethynyl ligands: synthesis, characterization and spectroscopic and electrochemical properties

A series of homoleptic and heteroleptic platinum(ii) complexes [Pt(C[triple bond, length as m-dash]CFc)(2)(L-L)] (L-L = COD , 1,1'-bis(diphenylphosphino)ferrocene (dppf) ), Q(2)[cis/trans-Pt(C(6)F(5))(2)(C[triple bond, length as m-dash]CFc)(2)] (cis, Q = PMePh(3), ; trans, Q = NBu(4), ), (NBu(4))[Pt(bzq)(C[triple bond, length as m-dash]CFc)(2)] (Hbzq = 7,8-benzoquinoline) and (NBu(4))(2)[Pt(C[triple bond, length as m-dash]CFc)(4)] has been synthesized and characterized spectroscopically and the structures of .2CHCl(3), and .2H(2)O.2CH(2)Cl(2) confirmed by single-crystal X-ray studies. The anion of complex , shows strong O-Hpi(C[triple bond, length as m-dash]C) interactions and weaker C-Clpi(C[triple bond, length as m-dash]C) contacts between the protons of two water and two CH(2)Cl(2) molecules and the C(alpha)[triple bond, length as m-dash]C(beta) of mutually cis alkynyl groups. In this complex the presence of additional O-HH-C(Cp) and C-ClH-C(Cp) contacts gives rise to an extended bidimensional network. The optical and electrochemical properties of all derivatives have been examined. It is remarkable that for complexes and a facile oxidatively induced coupling, giving rise to 1,4-diferrocenylbutadiyne, is observed, this also having been proven by chemical oxidation.     

Development of novel antioxidants: design,synthesis, and reactivity

We are attempting to develop novel synthetic antioxidants aimed at retarding the effects of free-radical induced cell damage. In this paper we discuss the design strategy and report the synthesis of seven novel antioxidants, including six catechols and a benzylic phenol. The bond dissociation enthalpy (BDE) for the most active (weakest) OH bond in each molecule was calculated by theoretical methods, as well as the BDE for the semiquinone radical. Reaction rates with the nitrogen-centered free radical DPPH(*) were measured in ethyl acetate. The log of k(DPPH) for bimolecular reaction correlated well with the primary BDE. The correlation between rate constants and calculated BDEs shows that the BDE is a good predictor of antioxidant activity with DPPH(*), suggesting that our design criteria are useful and that these compounds should undergo further testing in cell cultures and in animal models.     

Novel thiophene-based cycloruthenated compounds: synthesis, characterization, and reactivity

The reactions between a series of thiophene-based imines with [(η(6)-C(6)H(6))RuCl(μ-Cl)](2), in a basic medium, and in MeCN give a family of ruthenacycles of stoichiometry [Ru(C^N)(NCMe)(4)]PF(6) (C^N = orthometalated thiopheneimine). In these species, the C-H activation process is produced in most cases at the thiophene ring. When two C-H bonds are competing (thiophene vs aryl), the cyclometalation can be driven regioselectively to the thiophene unit or to the aryl ring as a function of the location of the iminic C=N bond. Cyclometalation can also be oriented to positions 2 or 3 of the thiophene depending on the situation of the imine in the heterocycle (3 or 2, respectively). In all studied cases, the η(6)-C(6)H(6) ligand was substituted by acetonitrile. The X-ray structures of two representative complexes have been determined. These thiophene-based metallacycles react with iodine under very mild conditions affording, after hydrolysis, substituted 3-iodo-2-formyl(benzo)thiophenes or substituted 2-iodo-3-formyl(benzo)thiophenes, as a function of the organometallic precursor.     

Molecular tweezers for hydrogen: synthesis, characterization, and reactivity

The first ansa-aminoborane N-TMPN-CH2C6H4B(C6F5)2 (where TMPNH is 2,2,6,6-tetramethylpiperidinyl) which is able to reversibly activate H2 through an intramolecular mechanism is synthesized. This new substance makes use of the concept of molecular tweezers where the active N and B centers are located close to each other so that one H2 molecule can fit in this void and be activated. Because of the fixed geometry of this ansa-ammonium-borate it forms a short N-H...H-B dihydrogen bond of 1.78 A as determined by X-ray analysis. Therefore, the bound hydrogen can be released above 100 degrees C. In addition, the short H...H contact and the N-H...H (154 degrees) and B-H...H (125 degrees) angles show that the dihydrogen interaction in N-TMPNH-CH2C6H4BH(C6F5)2 is partially covalent in nature. As a basis for discussing the mechanism, quantum chemical calculations are performed and it is found that the energy needed for splitting H2 can arise from the Coulomb attraction between the resulting ionic fragments, or "Coulomb pays for Heitler-London". The air- and moisture-stable N-TMPNH-CH2C6H4BH(C6F5)2 is employed in the catalytic reduction of nonsterically demanding imines and enamines under mild conditions (110 degrees C and 2 atm of H2) to give the corresponding amines in high yields.     

A base-free thorium-terminal-imido metallocene: synthesis, structure, and reactivity

The synthesis, structure, and reactivity of a base-free thorium terminal-imido metallocene have been comprehensively studied. Treatment of thorium metallocenes [{η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)}(2)ThMe(2)] and [{η(5)-1,3-(Me(3)C)(2)C(5)H(3)}(2)ThMe(2)] with RNH(2) gives diamides [{η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)}(2)Th(NHR)(2)] (R=Me (7), p-tolyl (8)) and [{η(5)-1,3-(Me(3)C)(2)C(5)H(3)}(2)Th(NH-p-tolyl)(2)] (9), respectively. Diamides 7 and 9 do not eliminate methylamine or p-toluidine, but sublime without decomposition at 150 °C under vacuum (0.01 mmHg), whereas diamide 8 is converted at 140 °C/0.01 mmHg into the primary amine p-tolyl-NH(2) and [{η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)}(2)Th=N(p-tolyl)] (10), which may be isolated in pure form. Imido metallocene 10 does not react with electrophiles such as alkylsilyl halides; however, it reacts with electron-rich or unsaturated reagents. For example, reaction of 10 with sulfur affords the metallacycle [{η(5)-1,2,4-(Me(3)C)(3)C(5)H(2)}(2)Th{N(p-tolyl)S-S}]. Imido 10 is an important intermediate in the catalytic hydroamination of internal alkynes, and an efficient catalyst for the trimerization of PhCN. Density functional theory (DFT) studies provide a detailed understanding of the experimentally observed reactivity patterns.     

8-Alkenylborondipyrromethene dyes. General synthesis, optical properties, and preliminary study of their reactivity

A new series of 8-alkenylBODIPY dyes were prepared via the Liebeskind-Srogl cross-coupling starting from 8-thiomethyl-substituted BODIPY. Ten derivatives were prepared using alkenylboronic acids in good to excellent yields (79-97%), and one additional example was prepared from an alkenylstannane in 74% yield. The products display Michael acceptor-like reactivity. The alkenyl fragment quenches the fluorescence of the BODIPY core, which is turned back on by reducing the double bond.     

Fullerenyl azide: synthesis and reactivity

Trimethylsilyl azide adds to the carbonyl carbon in a cage-opened fullerene derivative to form the first fullerenyl azide compound. The fullerene-bound azido group exhibits some unusual reactivity compared with that exhibited by other organic azido compounds. Heating the azidofullerene at 100 °C only led to the cleavage of peroxo groups in the compound, whereas the azido group remained unchanged. Triphenylphosphine reacted with the azido group to form isolable iminophosphorane, which could not be hydrolyzed under normal acidic and basic conditions.     

Pyrazolato-bridged polynuclear palladium and platinum complexes. Synthesis,structure, and reactivity

Cyclic trinuclear complexes [Pd(3)(mu-pz)(6)] (1) and [Pd(3)(mu-4-Mepz)(6)] (2) and dinuclear complex [Pd(2)(mu-3-t-Bupz)(2)(3-t-Bupz)(2)(3-t-BupzH)(2)] (3) have been prepared by the reactions of [PdCl(2)(CH(3)CN)(2)] with pyrazole (pzH), 4-methylpyrazole (4-MepzH), and 3-tert-butylpyrazole (3-t-BupzH), respectively, in CH(3)CN in the presence of Et(3)N. In the absence of the base, treatment of [PdCl(2)(CH(3)CN)(2)] with pzH gave the mononuclear complex, [Pd(pzH)(4)]Cl(2) (6). The reaction of [PtCl(2)(C(2)H(5)CN)(2)] with pzH in the presence of Et(3)N under refluxing in C(2)H(5)CN afforded the known dimeric Pt(II) complex, [Pt(pz)(2)(pzH)(2)](2) (7). The protons participating in the hydrogen bonding in 3 and 7 are easily replaced by silver ions to give the heterotetranuclear complex [Pd(2)Ag(2)(mu-3-t-Bupz)(6)] (4) and the heterohexanuclear complex [Pt(2)Ag(4)(mu-pz)(8)] (5). The complexes 1-6 are structurally characterized.     

2,5-Di-tert-butylphenylsilanetriol: synthesis and reactivity

Stable 2,5-di-tert-butylphenylsilanetriol was prepared by a stepwise synthesis. This compound reacted with triethylenediamine and lanthanum silylamide to form a 1∶1 molecular complex and highly thermally stable lanthanosilsesquioxane, respectively. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1583–1587, August, 1999.