Kinetics of oxidation of water by Mn(IV) sulfate in acid media

Kinetics of the Mn(IV)Mn(III) transition in the oxidation of watet to O₂ was investigated at 60–100°C in 6–15 M H₂SO₄. The reaction is approximately 2-nd order in Mn(IV) concentration in the process of oxidation and 1-st order in initial Mn(IV) concentration. The kinetics is interpreted by the existence of dimeric forms Mn(IV)·Mn(IV), Mn(IV)·Mn(III) and Mn(III)·Mn(III). The suggested mechanism includes O₂ formation directly in the coordination sphere of the Mn(IV)·Mn(IV) dimer in a polyelectronic process.

---

Mn (IV)»Mn (III) O₂ 60–100°C 6–15 M H₂SO₄. Mn (IV) I- Mn (IV). [Mn (IV)]₂; [Mn(III)]₂ Mn(IV)·Mn (III). , [Mn (IV)]₂

     

Iodometric determination of sulphate by a direct thermometric method

A thermometric method has been developed for the determination of sulphate after direct or indirect conversion to chromate. The chromate equivalent to sulphate is determined by direct injection enthalpimetry (DIE) using K1 as a reagent, by measuring the temperature change due to the exothermic reaction taking place. The temperature change is proportional to the concentration of sulphate originally present. The method is suitable for the determination of as low as 10^–4 M sulphate concentration, which means an increase in sensitivity of about tenfold in comparison with that of the thermometric method based on the reaction of sulphate with barium.

---

Zusammenfassung Eine thermometrische Methode wurde zur Bestimmung von Sulfat nach direkter oder indirekter Umsetzung zu Chromat entwickelt. Das dem Sulfat äquivalente Chromat wurde mittels direkter Injektionsenthalpimetrie (DIE) unter Anwendung von KI als Reagenz bestimmt, indem die infolge der sich abspielenden exothermen Reaktion auftretende Temperaturänderung gemessen wurde. Die Temperaturänderung ist der Konzentration des ursprünglich vorhandenen Sulfats proportional.Die Methode eignet sich zur Bestimmung von Sulfatkonzentrationen in der Größenordnung von 10^–4 M, was eine etwa zehnfache Erhöhung der Empfindlichkeit im Vergleich zu jener der auf der Reaktion von Sulfat mit Barium beruhenden thermometrischen Methode bedeutet.

---

Résumé On a mis au point une méthode thermométrique pour le dosage des sulfates, après conversion directe ou indirecte en chromate. Le dosage du chromate équivalent au sulfate s'effectue par enthalpimétrie d'injection directe en prenant l'iodure de potassium comme réactif et en mesurant les variations de température dues à la réaction exothermique qui se produit. La variation de température est proportionnelle à la concentration en sulfate initialement présent.La méthode se prête au dosage de concentrations en sulfate de l'ordre de 10^–4 M, ce qui signifie que la sensibilité est augmentée de dix fois comparativement à celle de la méthode thermométrique utilisant la réaction au sulfate de baryum.

---

. , , , , , . . 10^–4 M, , .

     

Recent progress in tartaric acid‐modified Raney nickel system for enantio‐differentiating hydrogenation

Tartaric acidmodified Raney nickel (TAMRNi) is an enantiodifferentiating catalyst for hydrogenation of ketones. The stereochemical models explaining the enantiodifferentiation of ketoester and 2alkanone were unified as an extended stereochemical model by the experimental supports. Based on this new model, a working hypothesis to improve the enantiomeric excess (ee) of the ketoester/TAMRNi system was developed, and the ee was improved to 96%. By further fine tuning of this system, almost perfect enantiodifferentiation resulting in over 98% ee was achieved.     

Substituierte 3-Amino-thiophene und 3-Amino-selenophene aus β-Chlor-α-cyan-zimtsäurenitril

Summary -Chloro--cyano-cinnamonitrile (1) reacts in one step with -oxo-thioles3 or successively with sodium sulphide and -chlorocarbonyl compounds4 to form the 5-substituted 4-amino-2-phenyl-thiophene-3-carbonitriles5. Analogously, the successive reactions of -chloro cinnamonitrile1 with sodium selenide — produced in situ from selene and sodium boronhydride — and -chlorocarbonyl compounds4 yields the 5-substituted 4-amino-2-phenyl-selenophene-3-carbonitriles6.

     

Solubility Study of Nimodipine Inclusion Complexation with α- and β-Cyclodextrin and some Substituted Cyclodextrins

The solubility of nimodipine was measured in aqueous solutions of the following cyclodextrins: -cyclodextrin (-CD), hydroxypropyl--CD (HP--CD), -cyclodextrin (-CD), random substituted methyl--CD (M--CD), three hydroxypropyl--CDs (HP--CD) with mutually different average degree of substitution, and hydroxypropyl--cyclodextrin (HP--CD). From the determined linear solubility diagrams the values of the binding constant K₁₁ of the inclusion complexes of nimodipine with the respective CDs were evaluated. The -CDs efficiently solubilized sparingly soluble nimodipine, the highest value of K₁₁ was found for M--CD (1680 M^-1), followed by -CD (550 M^-1) and HP--CDs, where the higher degree of substitution lowered K₁₁. Only slight solubilization of nimodipine was observed in the solutions of the -CDs and HP--CD.     

Properties of aqueous salt solutions of poly(ethylene oxide). Cloud points, θ temperatures

The determination of the properties of aqueous salt solutions of poly(ethylene oxide) has been extended to the cloud point, and temperature measurements have been made at several concentrations for various salts (flourides, iodides, acetates, formates, phosphates, bromides, thiosulfates and perchlorates). The resulting dependency of the critical temperatures (mostly between 290–350 K) on the molar concentration can be expressed as sequences showing the decreasing effect of anion species or cation species in salting out the polymer. The decreasing order of effectiveness of the anions in reducing the temperature is PO ₄ > HPO ₄ > S₂O ₃ > H₂PO ₄ ^– >F^– > HCOO^– > CH₃COO^– > Br^– > I^–. The order for cations is K⁺ Rb⁺ Na⁺ Cs⁺ > Sr⁺⁺ > Ba⁺⁺ Ca⁺⁺ > NH ₄ ⁺ > Li⁺. The changes brought about in temperatures by the salts were found to be the results of the changes taking place in the hydrophilic and hydrophobic interactions among polymer, solvent and additive salts and of the change of water structure by structure making or structure breaking ions, and of the influence of salts on the hydration sheath of the polymer.     

Nitrosation of mefenorex in the presence of cyclodextrins

- and -Cyclodextrin (CD) and heptakis-2,6-di-O-methyl--cyclodextrin (DIMEB) form soluble inclusion compounds with mefenorex (MEF); with -CD a partial inclusion occurs. No solid inclusion compound could be obtained with the four CDs. -, -CD and DIMEB, but not -CD, enhance the nitrosation rate of MEF if the nitrosation assay procedure (NAP test) is applied. During this reaction with - and -CD, solid inclusion compounds of the CDs and nitrosomefenorex (NMEF) precipitate.Part of the Ph.D. thesis of V. Wedelich, Freie Universität Berlin, 1985.     

Kinetics of the catalytic transformation of isobutene into methacrylonitrile with NO on supported nickel oxide aerogel

Kinetic studies of the nitroxidation of isobutene by NO show that the reaction follows a redox mechanism in the temperature range of 300–400°C. This mechanism implies an interaction between dehydrogenated isobutene -allyl radical and atomic nitrogen due to the decomposition of NO by the reduced catalyst, which is then reoxidized.

---

NO , 300–400°C. - , NO , .

     

Improvement of Solubility and Dissolution of 19-Norprogesterone via Inclusion Complexation

In an effort to modify the solubility and dissolution rate of the contraceptive steroid, 19-norprogesterone in order to improve its bioavailability, the cyclodextrin complexation approach was chosen. In solution, the complex formation with -cyclodextrin (-CD), hydroxyethyl -cyclodextrin (HE--CD) and hydroxypropyl -cyclodextrin (HP--CD) was confirmed by using solubility, UV, IR and ¹H-NMR spectrophotometric techniques. The phase solubility diagrams were categorized as A_L-type. The complexing affinity of the CDs investigated were ranked as follows: -CD > HP--CD > HE--CD. The complexation thermodynamic parameters were obtained from the temperature dependence of the dissociation constants. In the solid state, differential scanning calorimetery (DSC) and optical microscopy methods were utilized to characterize the complexes. Dissolution studies showed that such molecularly encapsulated forms offered a marked improvement in the dissolution rate compared to the parent drug.     

Liquid phase CO+H2 reactions in presence of ruthenium catalysts

Several effects on the hydrogenation of carbon monoxide in propanol in presence of ruthenium catalysts are examined. The homologation reaction is not observed, only propyl formate and propyl acetate are produced with any ruthenium catalyst. The pH-value is an important parameter: in acid media, the yield of propyl formate is noticeably increased indicating different catalytic active species. The addition of cesium salts is also benefitial for formate formation. This is not the case when water is associated with propanol as solvent. Finally, no ethylene glycol is detected. The process is found to be homogeneous and methanol seems to be the precursor of methyl formate.

---

, . , . : , . . , . . , -, .

     

Synthesis ofN-alkylamides of 3-fluoroalkylaziridine-2-carboxylic acids

The N-alkylamides of 3-fluoroalkylaziridine-2-carboxylic acids have been prepared for the first time by the interaction of ethyl 0-fltioroalkyl-,-dibromocarboxylates with primary amines.Prepared by a known procedure;² characteristics of previously unknown ester1b are given in the Experimental section.     

The role of intra- and intermolecular hydrogen bonds in the formation of β-cyclodextrin head-to-head and head-to-tail dimers. The results of ab initio and semiempirical quantum-chemical calculations

The conformation of a free -cyclodextrin molecule optimized by the MNDO/PM3 quantum-chemical calculations has C₇ symmetry. The right orientation of the interglucose hydrogen bonds in -cyclodextrin, in which the 2-OH groups act as the proton donors and the O atoms of the nearby 3"-OH groups function as the proton acceptors, is advantageous for thermodynamic reasons. The ring of seven H bonds thus formed stabilizes the symmetrical form of -cyclodextrin. The -cyclodextrin head-to-head dimer has D ₇ symmetry and consists of molecules whose 2-OH groups partcipate as proton donors in the formation of fourteen complementary intermolecular hydrogen bonds. The energy of H bonds in the -cyclodextrin monomer and dimer was estimated to be 1.0--1.4 kcal mol^–1. Of the two possible -cyclodextrin dimers, the head-to-tail dimer is more thermodynamically stable. The thermodynamic preference of the right orientation of the inter-glucose H bonds in -cyclodextrin was confirmed by the MP2/6-31G(d,p)//6-31G(d,p) ab initio calculations for maltose (-glucodioside). The maltose molecule with inter-glucose H bonds of the type 2-OHO(3")-H is more stable than the structure with the H-(2)OH-O(3") orientation of H bonds with a difference of 2.7 kcal mol^–1. According to the MNDO/PM3 method, the maltose structure with the right H bond orientation is more stable by 3.1 kcal mol^–1.     

A New Relation Between the Maxima Conductivities of Nonaqueous Concentrated Electrolytes and Chemical Hardness of Solvents and Salts

For nonaqueous electrolytes, using the HSAB principle, we tried to correlate the conductivity maxima _MAX, vs. only two intrinsic parameters: chemical hardness of the solvent and that of the salt. Thus, not only the nature of the solvent but also that of the salt were taken into account. We were able to predict for a given solvent the variation of _MAX as a function of the hardness of the salt and that of the solvent: _MAX = K(1 – ||/_SOLVENT) with || = |_SOLVENT – _SALT| and K a constant in S-cm^–1 independent of the salt, but not of the solvent.     

Diastereoselectivity in theLewis acid mediated aldol reaction of chiral α, β-epoxyaldehydes with a ketene silyl acetal

Summary The Lewis acid mediated aldol reaction of chiral , -cis andtrans epoxyaldehydes1 and2 withtert-butyl ketene silyl acetal proceeds mainly withanti diastereofacial preference. The best results were obtained forcis epoxyaldehyde1 in the presence of catalytic amounts of BiCl₃·1.5 eq. ZnI₂ (anti:syn 13:1), whereas the poorest stereoselectivity was observed when an excess of LiClO₄ was used (anti:syn 1:1). The more stable epoxyaldehyde conformers were determined and the diastereofacial preference was found to be in agreement with a nucleophilic attack on the energetically more favoured conformers.

---

Diastereoselektivität derLewis-Säure-katalysierten Aldolreaction zwischen chiralen , -Epoxyaldehyden und einem Ketensilylacetal

Zusammenfassung DieLewis-Säure-katalysierte Aldolreaktion der chiralen , -cis- und -trans-Epoxyaldehyde1 und2 mittert-Butylketensilylacetal verläuft stereoselektivanti. Die besten Ergebnisse wurden für dencis-Epoxyaldehyd1 in Gegenwart katalytischer Mengen BiCl3·1.5 eq. Znl₂ erhalten (anti:syn 13:1). Die geringste Stereoselektivität trat auf, wenn LiClO₄ im Überschuß eingesetzt wurde (anti:syn 1:1). Das beobachtete Verhalten steht mit einem nucleophilen Angriff am energetisch günstigeren Konformeren im Einklang.

     

Sintering of supported palladium

Sintering results of Pd supported on carbon black at 723–973 K, in water vapor, in H₂ and under high vacuum are reported. They are compared with sintering data of Pd on other supports. The observed sequences are: SiO₂C>sepioliteAl₂O₃>AlPO₄ and H₂O>high vacuum>H₂.

---

Pd 723–973 , , H₂ . Pd . : SiO₂Al₂O₃>AlPO₄ H₂O> >H₂.

     

Comparative selectivities of two copper-based catalysts: Mixed Cu?Cr and Cu?Al oxides for allylic alcohol reactions in the presence of molecular hydrogen

In the presence of mixed copper-chromium (aluminium) oxide, allylic alcohols react with molecular hydrogen and lead to several primary products. This is due to the simultaneous presence of two active sites in the mixed oxides. Copper species (Cu⁺) are responsible for hydrogenation (HYD) and the chromium (Cr³⁺) (aluminium [Al³⁺]) species for the isomerization (I) and the hydrodeoxygenation (HDO) reactions. However, the stronger acidic character of Al³⁺, compared with Cr³⁺, entails some differences evidenced by the HYD/(I+HDO) and HDO/I ratios.

---

- () , . . (Cu⁺ (), (Cr³⁺) ( Al³⁺) (), (). , Al³⁺ Cr³⁺ , /(+) /.

     

Improvement in biopharmaceutics of prednisolone by β- and γ-cyclodextrins

Inclusion complexes of prednisolone with - and -cyclodextrins in the molar ratio of 1:2 and 2:3, respectively, were prepared, and their dissolutions, permeations through a cellophane membrane, releases from a suppository base, andin vivo absorption behaviors were examined. The apparent rates of dissolution and permeation of prednisolone were significantly increased by the formations of inclusion complexes with - and -cyclodextrins. The release of the drug from Witepsol H₁₅ suppositories was also increased by complexation. The serum levels of prednisolone following oral and rectal administrations of the cyclodextrin complexes to rabbits were higher than those of the drug alone. The enhanced initial absorption of prednisolone by cyclodextrin complexation suggested the possibility of smaller doses in prednisolone therapy.     

Effect of 2-Hydroxypropyl-β-cyclodextrin on Release Rate of Metoprolol from Ternary Metoprolol/2-hydroxypropyl-β-cyclodextrin/Ethylcellulose Tablets

The effect of 2-hydroxypropyl--cyclodextrin (HP--CyD) on the release of a water-soluble ₁-selective adrenoreceptor antagonist, metoprolol (Met), from ternary Met/HP--CyD/ethylcellulose (EC) tablets was investigated. The release rate of Met from the ternary tablets was dependent on amounts of HP--CyD in the tablets, i.e., the rate decreased when small amounts of HP--CyD were added, while large amounts of HP--CyD accelerated the rate. The slowest rate was observed for the tablet consisted of a 30/10/60 weight ratio of Met/HP--CyD/EC. The analyses of the release rates by the Korsmeyer equation and their temperature dependence suggested that Met is released from the EC matrix containing HP--CyD according to the diffusion-controlled mechanism. The water penetration studies and the micro- and macroscopic observations suggested that the retarding effect of HP--CyD is attributable to a viscous gel formation in small pores on the surface of the tablets, where HP--CyD gels may work as a barrier for the water penetration into the tablets and the release of the drug from the tablets. The in-vitro release property of the ternary tablets was reflected in the in-vivo absorption profile in dogs. The results indicated that a combination of HP--CyD and EC is useful for the release control of water-soluble drugs such as Met.     

Skeletal isomerization of 1-butene on ZrO2/Al2O3 treated with sulfate ion

The catalytic activity for skeletal isomerization of 1-butene on ZrO₂ supported on Al₂O₃ and doped with sulfate ion has been found to be higher than on pure ZrO₂/Al₂O₃, Al₂O₃ containing sulfate ion and a commercial SiO₂–Al₂O₃ of H_o<–13.7. Sulfate ion was capable of transforming ZrO₂/Al₂O₃ into a solid superacid.

---

1- ZrO₂, Al₂O₃ , , ZrO₂, , Al₂O₃, , SiO₂–Al₂O₃ H_o < –13,7. ZrO₂/Al₂O₃ .

     

Binding of vitamin A byβ-cyclodextrin and heptakis(2,6-O-dimethyl)-β-cyclodextrin

Inclusion complexation of all-trans-retinol, retinal and retinoic acid with -cyclodextrin (-CD) and heptakis(2,6-O-dimethyl)--cyclodextrin (DM--CD) were investigated by means of UV-vis spectroscopy. The association constants (K _a) obtained for vitamin A with DM--CD is greater than with -CD. On the other hand, for the same host compoundK _a values of retinol, retinal and retinoic acid are very close to each other.