Configurations and calibration methods for passive sampling techniques

Passive sampling technology has developed very quickly in the past 15 years, and is widely used for the monitoring of pollutants in different environments. The design and quantification of passive sampling devices require an appropriate calibration method. Current calibration methods that exist for passive sampling, including equilibrium extraction, linear uptake, and kinetic calibration, are presented in this review. A number of state-of-the-art passive sampling devices that can be used for aqueous and air monitoring are introduced according to their calibration methods.     

Passive sampling as a tool for obtaining reliable analytical information in environmental quality monitoring

Passive sampling technology has been developing very quickly for the past 20 years, and is widely used for monitoring pollutants in different environments, for example air, water, and soil. It has many significant advantages, including simplicity, low cost, no need for expensive and complicated equipment, no power requirements, unattended operation, and the ability to produce accurate results. The present generation of passive samplers enables detection and analysis of bioavailable pollutants at low and very low concentrations and investigation of the environmental concentration of organic and inorganic pollutants not only on the local scale but also on continental and global scales. This review describes the current application of passive sampling techniques in environmental analysis and monitoring, under both equilibrium and non-equilibrium conditions.     

Advances in passive sampling in environmental studies

Passive sampling is based on the phenomenon of mass transport due to the difference between chemical potentials of analytes in a given environmental compartment and the collection medium inside a dosimeter. The subsequent laboratory procedure (i.e. extraction, identification and determination of analytes) is the same as in the case of classic sampling techniques.Passive sampling techniques are characterized by simplicity with regard to the dosimeter's construction as well as its maintenance. Therefore, they find ever increasing application in the field of environmental research and analytics. When choosing a passive sampling method, one should not forget that some passive samplers require the time-consuming calibration step before being used in the field.Novel solutions and modifications of existing sampler designs have been presented. Practical application of passive dosimetry in environmental analytics, including sampling of water, soil, air and other atypical media are discussed. Some aspects of calibration methods in passive dosimetry are also described. The latest trends in the application of passive sampling are highlighted.     

Passive sampling in environmental analysis

Since its invention more than three decades ago, passive sampling technology has been widely used for environmental monitoring throughout the world. In many cases, it is the only practical means of determining pollution levels caused by numerous anthropogenic chemicals. Passive sampling technology today is used in various areas ranging from workplace exposure monitoring to global issues of climate change arising due to the presence of various chemicals in the atmosphere. In this review, the present status of the technology and its applications will be discussed along with aspects related to its regulatory acceptance and recent trends.     

被动采样技术在测定沉积物中有机污染物的生物可利用性和毒性中的研究进展

综述了被动采样技术作为仿生萃取方法在测定沉积物中有机污染物的生物可利用性和毒性中的应用。对比了半渗透膜装置、聚乙烯膜装置、聚甲醛树脂萃取和固相微萃取这些常见被动采样技术在使用过程中的优缺点,并针对被动采样技术应用中的问题,提出可能的解决手段和研究需求。     

Potential applications of passive sampling for monitoring non-polar industrial pollutants in the aqueous environment in support of REACH

Possible roles of passive sampling within the context of the European REACH legislation are discussed. Passive samplers can provide information on environmental concentrations, fate and behaviour of substances of concern. They can potentially replace biota in the assessment of bioavailability, having advantages including lower cost and variability, and greater repeatability and acceptability on ethical grounds. Where remedial actions (e.g., product withdrawal, replacement or redesign) may be required, wrong decisions are potentially very costly. Against this background it may be possible to develop strategies based on passive sampling that will protect the environment from potential damage whilst minimising operational costs.     

Rapid quantification of pharmaceuticals and pesticides in passive samplers using ultra high performance liquid chromatography coupled to high resolution mass spectrometry

The presence of both pharmaceuticals and pesticides in the aquatic environment has become a well-known environmental issue during the last decade. An increasing demand however still exists for sensitive and reliable monitoring tools for these rather polar contaminants in the marine environment. In recent years, the great potential of passive samplers or equilibrium based sampling techniques for evaluation of the fate of these contaminants has been shown in literature. Therefore, we developed a new analytical method for the quantification of a high number of pharmaceuticals and pesticides in passive sampling devices. The analytical procedure consisted of extraction using 1:1 methanol/acetonitrile followed by detection with ultra-high performance liquid chromatography coupled to high resolution and high mass accuracy Orbitrap mass spectrometry. Validation of the analytical method resulted in limits of quantification and recoveries ranging between 0.2 and 20 ng per sampler sheet and between 87.9 and 105.2%, respectively. Determination of the sampler-water partition coefficients of all compounds demonstrated that several pharmaceuticals and most pesticides exert a high affinity for the polydimethylsiloxane passive samplers. Finally, the developed analytical methods were used to measure the time-weighted average (TWA) concentrations of the targeted pollutants in passive samplers, deployed at eight stations in the Belgian coastal zone. Propranolol, carbamazepine and seven pesticides were found to be very abundant in the passive samplers. These obtained long-term and large-scale TWA concentrations will contribute in assessing the environmental and human health risk of these emerging pollutants.     

Combination of sorption properties of polydimethylsiloxane and solid‐phase extraction sorbents in a single composite material for the passive sampling of polar and apolar pesticides in water

Passive sampling techniques have been developed as an alternative method for in situ integrative monitoring of trace levels of neutral pesticides in environmental waters. The objective of this work was to develop a new receiving phase for pesticides with a wide range of polarities in a single step. We describe the development of three new composite silicone rubbers, combining polydimethylsiloxane mechanical and sorption properties with solid‐phase extraction sorbents, prepared as a receiving phase for passive sampling. A composite silicone rubber composed of polydimethylsiloxane/poly(divinylbenzene‐co‐N‐vinylpyrrolidone) was selected by batch experiments for its high sorption properties for pesticides with octanol‐water partition coefficients ranging from 2.3 to 5.5. We named this composite material “Polar/Apolar Composite Silicone Rubber”. A structural study by scanning electron microscopy confirmed the homogeneous dispersion of the sorbent particles and the encapsulation of particles within the polydimethylsiloxane matrix. We also demonstrate that this composite material is resistant to common solvents used for the back‐extraction of analytes and has a maximal resistance temperature of 350°C. Therefore, the characteristics of the “Polar/Apolar Composite Silicone Rubber” meet most of the criteria for use as a receiving phase for the passive sampling of pesticides.     

Extraction and concentration of vapors from fire debris for forensic purposes: Evaluation of the use of Radiello Passive Air Sampler

The Radiello Passive Air Sampler is one of the latest innovations developed for the sampling of pollutants in the air by passive headspace. It has been reported that its properties allow an enhanced sensitivity, reproducibility and adsorption capacity. It therefore appears to be of interest in the extraction of potential residues of ignitable liquids present in fire debris when arson is suspected.A theoretical approach and several laboratory tests have made it possible to precisely characterize in a forensic perspective the potential of the device in extracting and concentrating the vapors of ignitable liquids found in fire debris. Despite some advantages, the Radiello device appears to be less efficient than traditional axial symmetry samplers.     

Sample preparation for gas chromatographic determination of halogenated volatile organic compounds in environmental and biological samples

In this review, the wide spectrum of the techniques of isolation and/or preconcentration and final determination of halogenated volatile organic compounds (HVOCs) in water, air, soil, sediment and biological fluids are presented and discussed. The techniques discussed are solvent microextraction, solid phase extraction, gas extraction (static and dynamic techniques), membrane processes and passive sampling. Also, direct techniques, such as direct aqueous injection into gas chromatography (GC) column and membrane inlet mass spectrometry, are presented. Main attention is paid to the practical application of these techniques during all HVOCs determination.     

Advances in sample preparation in chromatography for organic environmental pollutants analyses

Many pollutants are present at trace level in our environment, which are beyond the scope of the detection by advance instruments too. Therefore, there is urgent need to develop advance sample preparation methods to determine the concentrations of the pollutants even at trace levels. Keeping this into consideration, many extraction techniques have been developed and applied for the analysis of organic pollutants in environmental samples. This review presents the sate-of-the-art of sample preparation methods in environmental samples. The extraction techniques discussed are headspace, liquid based extraction, supported liquid, homogeneous liquid–liquid, homogeneous liquid–liquid, single drop micro-extraction, membrane assisted solvent, solid-phase, molecularly imprinted solid-phase, monolithic spin column, matrix solid-phase, dispersive solid-phase, disposable pipette, magnetic solid-phase, solid-phase micro-extraction, micro-extraction by packed sorbent and stir bar sorptive. The article will be highly useful for environmental chromatographers.     

State of the art of environmentally friendly sample preparation approaches for determination of PBDEs and metabolites in environmental and biological samples: A critical review

Green chemistry principles for developing methodologies have gained attention in analytical chemistry in recent decades. A growing number of analytical techniques have been proposed for determination of organic persistent pollutants in environmental and biological samples. In this light, the current review aims to present state-of-the-art sample preparation approaches based on green analytical principles proposed for the determination of polybrominated diphenyl ethers (PBDEs) and metabolites (OH-PBDEs and MeO-PBDEs) in environmental and biological samples. Approaches to lower the solvent consumption and accelerate the extraction, such as pressurized liquid extraction, microwave-assisted extraction, and ultrasound-assisted extraction, are discussed in this review. Special attention is paid to miniaturized sample preparation methodologies and strategies proposed to reduce organic solvent consumption. Additionally, extraction techniques based on alternative solvents (surfactants, supercritical fluids, or ionic liquids) are also commented in this work, even though these are scarcely used for determination of PBDEs. In addition to liquid-based extraction techniques, solid-based analytical techniques are also addressed. The development of greener, faster and simpler sample preparation approaches has increased in recent years (2003–2013). Among green extraction techniques, those based on the liquid phase predominate over those based on the solid phase (71% vs. 29%, respectively). For solid samples, solvent assisted extraction techniques are preferred for leaching of PBDEs, and liquid phase microextraction techniques are mostly used for liquid samples. Likewise, green characteristics of the instrumental analysis used after the extraction and clean-up steps are briefly discussed.     

Current use of pressurised liquid extraction and subcritical water extraction in environmental analysis

This review updates our knowledge about pressurised liquid extraction (PLE) and subcritical water extraction (SWE), two sample preparation techniques which are increasingly used for the extraction of moderately and non-volatile organic pollutants from a variety of solid and semi-solid environmental matrices. Parameters influencing the extraction yield and selectivity are discussed. The results deriving from the analysis of several different classes of compounds in a variety of matrices are compared with a reference method, e.g., Soxhlet extraction. PLE and SWE are both promising techniques due to the short extraction times and low solvent consumption. In addition, SWE offers a wide range of polarities by changing the temperature and can easily provide class-selective extraction by temperature programming and/or the addition of modifier(s). This indicates that, even though many applications have already been reported, more can be expected.     

Sampling and analytical framework for routine environmental monitoring of organic pollutants

Dubious data would lead to incorrect interpretations and consequently faulty conclusions. Environmental monitoring results therefore have to be unambiguous to avoid misunderstanding the problems under investigation. Representative sampling and appropriate laboratory procedures are keys to acquiring quality data in order to draw unbiased conclusions.Although a large number of studies on organic pollutants have been published, few efforts have been directed towards instituting a systematic framework from sampling design to instrumental analysis. Generally, the main components in such a framework should include sampling design, sample preparation, sample extraction, extract purification and fractionation, and quantification (including qualitative and quantitative analyses).This review outlines the sampling and analytical framework appropriate for routine monitoring of organic pollutants, particularly persistent organic pollutants widely occurring in the environment. We emphasize statistically-based sampling schemes and quality-assurance and quality-control measures desirable for environmental monitoring programs.By way of demonstrating their importance, we especially review procedures for collecting unconventional environmental samples (e.g., human blood, breast milk, human hair, fish and bird tissues, and ice and snow) and analytical methods for typical emerging organic chemicals.     

Stir bar sorptive extraction for trace analysis

Stir bar sorptive extraction (SBSE) was introduced in 1999 as a solventless sample preparation method for the extraction and enrichment of organic compounds from aqueous matrices. The method is based on sorptive extraction, whereby the solutes are extracted into a polymer coating on a magnetic stirring rod. The extraction is controlled by the partitioning coefficient of the solutes between the polymer coating and the sample matrix and by the phase ratio between the polymer coating and the sample volume. For a polydimethylsiloxane coating and aqueous samples, this partitioning coefficient resembles the octanol-water partitioning coefficient. In comparison to solid phase micro-extraction, a larger amount of sorptive extraction phase is used and consequently extremely high sensitivities can be obtained as illustrated by several successful applications in trace analysis in environmental, food and biomedical fields. Initially SBSE was mostly used for the extraction of compounds from aqueous matrices. The technique has also been applied in headspace mode for liquid and solid samples and in passive air sampling mode. In this review article, the principles of stir bar sorptive extraction are described and an overview of SBSE applications is given.     

Advances in organic–inorganic hybrid sorbents for the extraction of organic and inorganic pollutants in different types of food and environmental samples

The efficiency of the extraction and removal of pollutants from food and the environment has been an important issue in analytical science. By incorporating inorganic species into an organic matrix, a new material known as an organic–inorganic hybrid material is formed. As it possesses high selectivity, permeability, and mechanical and chemical stabilities, organic–inorganic hybrid materials constitute an emerging research field and have become popular to serve as sorbents in various separaton science methods. Here, we review recent significant advances in analytical solid‐phase extraction employing organic–inorganic composite/nanocomposite sorbents for the extraction of organic and inorganic pollutants from various types of food and environmental matrices. The physicochemical characteristics, extraction properties, and analytical performances of sorbents are discussed; including morphology and surface characteristics, types of functional groups, interaction mechanism, selectivity and sensitivity, accuracy, and regeneration abilities. Organic–inorganic hybrid sorbents combined with extraction techniques are highly promising for sample preparation of various food and environmental matrixes with analytes at trace levels.     

Determination of pharmaceuticals in environmental and biological matrices using pressurised liquid extraction—Are we developing sound extraction methods?

Pressurised liquid extraction (PLE) is now a well established and extensively applied extraction technique in environmental analysis for pollutants such as persistent organic pollutants (POPs). During the past decade, an emerging group of environmentally interesting analytes are pharmaceuticals that are continuingly released into the environment. This class is comprised with compounds of various properties. As the field of the analysis of these compounds grows, an increasing number of PLE methods for pharmaceuticals of varying quality are developed and published. This review summarises the critical PLE parameters during PLE method development and highlight them with examples from recently published papers utilising pressurised liquid extraction for the determination of pharmaceuticals in environmental and biological matrices. These recent methods are summarised and critically discussed with the aim to provide important reflections to alleviate in future PLE development for pharmaceuticals in environmental matrices.     

A critical review of vacuum-assisted headspace solid-phase microextraction for environmental analysis

Vacuum-assisted headspace solid-phase microextraction (Vac-HSSPME) is an emerging analytical technique, which further advances HSSPME by providing lower detection limits of analytes with poor volatility at shorter extraction times. This review discusses the theoretical aspects and possibilities of the Vac-HSSPME technique for analysis of environmental samples. Optimization of key parameters, currently available equipment and methods for quantification of organic pollutants in water and soil are considered. Key problems and limitations of the technique are discussed along with possible approaches for its future development. The technique has a well-developed theory, which could be used for modeling of the extraction process, faster method development, and optimization. Wider application of the technique is limited by the lack of automation, which, however, seems possible to develop and implement by manufacturers of commercial multi-purpose autosamplers for gas chromatography instruments. It has been shown that Vac-HSSPME allows decreasing cross-contamination of samples from the laboratory air, which is advantageous for identification and quantification of trace environmental pollutants. Simple equipment for the technique makes it possible to apply for on-site sample preparation and analysis of environmental samples.     

Polycyclic aromatic hydrocarbons in the atmosphere: monitoring, sources, sinks and fate. I: Monitoring and sources

This is the first of a series of two papers intended to review the state-of-the-art knowledge on atmospheric PAHs, concerning their monitoring, sources and transformation processes in the atmosphere. The monitoring section briefly introduces this class of compounds, mainly focusing on the 16 PAHs indicated by the US-EPA as priority pollutants. These compounds undergo partitioning between the gas phase and particulate, which has to be considered in the choice of the sampling methodology. Furthermore, sampling artifacts may arise from further phase transfers inside the sampling device. After sampling, extraction, clean up and detection/quantification procedures will follow. They are closely related since the choice of the extraction technique will heavily condition the clean-up step, and both procedures will place demands on the performance of the detection technique (usually GC-MS or HPLC). This is particularly true in the case of complex samples such as those arising from atmospheric sampling. The sources of atmospheric PAHs are then discussed with a particular focus on receptor models, which can allow the apportionment of PAH sources based on concentration data that can be routinely obtained by pollution control networks.     

Analysis of industrial contaminants in indoor air. Part 2. Emergent contaminants and pesticides

This article reviews recent literature on the analysis of several contaminants related to the industrial development in indoor air in the framework of the REACH project. In this second part, the attention is focused on emergent contaminants and biocides. Among these chemicals, phthalates, polybrominated and phosphate flame retardants, fragrances, pesticides, as well as other emerging pollutants, are increasing their environmental and health concern and are extensively found in indoor air. Some of them are suspected to behave as priority organic pollutants (POPs) and/or endocrine disrupting compounds (EDC), and can be found both in air and associated to the suspended particulate matter (PM) and settled dust. Main literature considered for this review is from the last ten years, reporting analytical developments and applications regarding the considered contaminants in the indoor environment. Sample collection and pretreatment, analyte extraction or desorption, clean-up procedures, determination techniques, and performance results are summarized and discussed.