Atom manipulation with the scanning tunneling microscope: nanostructuring and femtochemistry

We briefly survey our recent studies on the ‘soft’lateral manipulation of atoms and small molecules with the scanning tunneling microscope (STM), whereby mainly the tip–surface forces are employed. Repulsive (pushing) as well as discontinuous (pulling) and continuous (sliding)attractive manipulation modes could be distinguished on Cu(211) for CO molecules and metal atoms, respectively. In the case of pulling of Cu atoms on Cu(111) even finer details could be discerned: the adparticle may show various movement patterns visiting different surface sites upon applying different tip forces. Lateral manipulation also allows modifications of the Cu(211) substrate itself in an atom-by-atom manner by releasing atoms from sixfold coordinated kink sites and even sevenfold coordinated regular step sites. Furthermore, investigations concerning controled vertical manipulation with emphasis on ‘picking-up’ single CO molecules are reported. The mechanism behind vertical transfer of CO molecules relates to ultrafast chemical processes. Vertical manipulation implies, besides extending the possibilities for the build-up of nanostructures, the important possibility of creating structurally and compositionally well-defined tips, which may eventually lead to chemical sensitivity with the STM.     

Manipulation of atoms and molecules with a low temperature scanning tunneling microscope

Apart from its ability to image surfaces with atomic resolution the scanning tunneling microscope has evolved as a tool to manipulate single atoms and molecules. In this paper we present several examples of atomic manipulation and the formation of nanostructures with this technique. As examples for lateral manipulation, i.e. the sliding of atoms and molecules along the surface, we show CO, C₂H₄ and Pb on a stepped copper surface, the Cu(211). As examples for vertical manipulation, i.e. the transfer of atoms and molecules between the tip and the surface, we discuss Xe and C₃H₆. The design of our low temperature scanning tunneling microscope is shortly described.     

Controlled lateral manipulation of single molecules with the scanning tunneling microscope

We report on the first successful lateral manipulation of molecules and controlled formation of nanostructures with the Scanning Tunneling Microscope (STM) at temperatures above 4 K as used by Eigler and collaborators. Among the first structures, we built the letters F and U forming the logo of our university at 30 K with CO molecules on a Cu(211) substrate. Our method to manipulate the molecules is analogous to that employed successfully up to now only by Eigler and co-workers. First experiences concerning the manipulation of the CO molecules on the highly anisotropic substrate are presented and the crucial role of the tip composition in imaging the CO molecules is demonstrated.     

New mechanism for single atom manipulation

Scanning tunneling microscope (STM) investigations of the step roughening of Ag(110) have shown that the STM tip extracts atoms from otherwise stable steps even at typical imaging conditions. Detailed analyses of single STM scans reveal that none of the so far known lateral manipulation mechanisms (pushing, pulling, sliding) account for the observed atom extraction. The Ag atoms rather follow the energetically favorable path of a tip induced exchange process, similar to the concerted motion proposed previously for the diffusion on fcc(110) surfaces including a metastable and thus experimentally detectable dumbbell transition state.     

基于原子操纵技术的人工量子结构研究

扫描隧道显微镜原子操纵技术是指利用扫描探针在特定材料表面以晶格为步长搬运单个原子或分子的技术.它是纳米尺度量子物理与器件研究领域一种独特而有力的研究手段.利用这种手段,人们能够以原子或分子为单元构筑某些常规生长或微加工方法难以制备的人工量子结构,通过对格点原子、晶格尺寸、对称性、周期性的高度控制,实现对局域电子态、自旋序、以及能带拓扑特性等量子效应的设计与调控.原子操纵技术与超快测量及自动控制技术的结合,使得人们能够进一步研究原子级精准的量子器件,因而该技术成为探索未来器件新机理、新工艺的重要工具.本文首先简介原子操纵方法的发展过程和技术要点,然后分别介绍人工电子晶格、半导体表面人工量子点、磁性人工量子结构、人工结构中的信息存储与逻辑运算、单原子精度原型器件等方面的最新研究进展,以及单原子刻蚀和自动原子操纵等方面的技术进展,最后总结并展望原子操纵技术的应用前景和发展趋势.     

Recording intramolecular mechanics during the manipulation of a large molecule

The technique of single atom manipulation by means of the scanning tunneling microscope (STM) applies to the controlled displacement of large molecules. By a combined experimental and theoretical work, we show that in a constant height mode of manipulation the STM current intensity carries detailed information on the internal mechanics of the molecule when guided by the STM tip. Controlling and time following the intramolecular behavior of a large molecule on a surface is the first step towards the design of molecular tunnel-wired nanorobots.     

Anchoring of organic molecules to a metal surface: HtBDC on Cu(110)

The interaction of largish molecules with metal surfaces has been studied by combining the imaging and manipulation capabilities of the scanning tunneling microscope (STM). At the atomic scale, the STM results directly reveal that the adsorption of a largish organic molecule can induce a restructuring of a metal surface underneath. This restructuring anchors the molecules on the substrate and is the driving force for a self-assembly process of the molecules into characteristic molecular double rows.     

Inducing all steps of a chemical reaction with the scanning tunneling microscope tip: towards single molecule engineering

All elementary steps of a chemical reaction have been successfully induced on individual molecules with a scanning tunneling microscope (STM) in a controlled step-by-step manner utilizing a variety of manipulation techniques. The reaction steps involve the separation of iodine from iodobenzene by using tunneling electrons, bringing together two resultant phenyls mechanically by lateral manipulation and, finally, their chemical association to form a biphenyl molecule mediated by excitation with tunneling electrons. The procedures presented here constitute an important step towards the assembly of individual molecules out of simple building blocks in situ on the atomic scale.     

STM manipulation of a subphthalocyanine double-wheel molecule on Au(111)

A new class of double-wheel molecules is manipulated on a Au(111) surface by the tip of a scanning tunneling microscope (STM) at low temperature. The double-wheel molecule consists of two subphthalocyanine wheels connected by a central rotation carbon axis. Each of the subphthalocyanine wheels has a nitrogen tag to monitor its intramolecular rolling during an STM manipulation sequence. The position of the tag can be followed by STM, allowing us to distinguish between the different lateral movements of the molecule on the surface when manipulated by the STM tip.     

Model calculations of STM imaging and manipulation of oxygen on Pt(111)

We study tip-adsorbate–substrate interactions in scanning tunneling microscopy (STM) manipulation and imaging, and the influence of impurities on the images. Thence, we perform molecular dynamics simulations and calculate qualitative STM images for oxygen on Pt(1 1 1) surface. The adsorption site of the oxygen molecule is found to be in accordance with ab initio calculations. The calculated STM image has a good resemblance to the experimental ones. The contamination of the tip by oxygen or water alters the STM image strongly. Molecular dynamics simulations on manipulations of oxygen on the surface reveal several mechanisms of how molecular oxygen can be either produced or decomposed with STM tip. Finally, we find out that transfer of oxygen from the surface to an STM tip is not very probable.     

Manipulation and control of a single molecular rotor on Au (111) surface

Three different methods are used to manipulate and control phthalocyanine based single molecular rotors on Au (111) surface: (1) changing the molecular structure to alter the rotation potential; (2) using the tunnelling current of the scanning tunnelling microscope (STM) to change the thermal equilibrium of the molecular rotor; (3) artificial manipulation of the molecular rotor to switch the rotation on or off by an STM tip. Furthermore, a molecular `gear wheel' is successfully achieved with two neighbouring molecules.     

Preparing and regulating a bi-stable molecular switch by atomic manipulation

We present a scanning tunneling microscopy (STM) investigation into the influence of the STM tip on the adsorption site switching of polychlorinatedbiphenyl (PCB) molecules on the Si(111)-7?×?7 surface at room temperature. From an initially stable adsorption configuration, atomic manipulation by charge injection from the STM tip prepared a new bi-stable configuration that switched between two bonding arrangements. No switching rate bias dependence was found for +?1.0 to +?2.2?V. Assuming a thermally driven switching process we find that the measured energy barriers to switching are influenced by the exact location of the STM tip by more than 10%. We propose that this energy difference is due the dispersion interaction between the tip and the molecule.     

Reversible switching of single tin phthalocyanine molecules on the InAs(111)A surface

Individual tin phthalocyanine (SnPc) molecules adsorbed on the InAs(111)A surface were studied by low-temperature scanning tunnelling microscopy (STM) at 5?K. Consistently with the nonplanar molecular structure, SnPc adopts two in-plane adsorption geometries with the centre Sn atom either above (SnPc(up)) or below (SnPc(down)) the molecular plane. Depending on the current and bias applied to the tunnel junction, the molecule can be reversibly switched between the two conformations, implying a controlled transfer of the Sn atom through the molecular plane. The SnPc(down) conformer is characterized by an enhanced surface bonding as compared to the SnPc(up) conformer. SnPc(up) molecules can be repositioned by the STM tip by means of lateral manipulation, whereas this is not feasible for SnPc(down) molecules. The reversible switching process thus enables one to either laterally move the molecule or anchor it to the semiconductor surface.     

Reliable Lateral Manipulation of Single Adatom on Metal fcc（lll） Surfaces with a Single-Atom Tip

Using molecular statistics simulations based on the embedded atom method potential, we investigate the reliability of the lateral manipulation of single Pt adatom on Pt（111） surface with a single-atom tip for different tip heights （tip-surface distance） and tip orientations. In the higher tip-height range, tip orientation has little influence on the reliability of the manipulation, and there is an optimal manipulation reliability in this range. In the lower tip- height range the reliability is sensitive to the tip orientation, suggesting that we can obtain a better manipulation reliability with a proper tip orientation. These results can also be extended to the lateral manipulation of Pd adatom on P d （111） surface.     

室温下单个甘氨酸分子在Cu(111)表面的操纵研究

先用低能电子衍射(LEED)证明了甘氨酸(NH₂-CH₂-COOH)能在室温下在Cu单晶表面产生比较稳定的吸附，然后用扫描隧道显微镜(STM)进一步研究了其吸附情况，看到单个甘氨酸分子在Cu(111)面上吸附稳定并至少有三种吸附状态.分子操纵研究结果表明，甘氨酸分子是被针尖“推着”移动的，它在Cu(111)面有固定的吸附位，并且移动时其吸附状态可以不变.研究结果表明，甘氨酸适合做室温下小分子的可控操纵研究，并且也说明室温下小分子的可控操纵是可能的. 关键词：     

Mechanical properties of H2Pc self-assembled monolayers at the single molecule level by noncontact atomic force microscopy

The mechanical properties of molecular self-assembled monolayers (SAMs) play an important role in understanding the interactions between molecules in the self-assembly, the interactions between molecules and substrate, and thus the formation mechanism of SAMs. Using a high-resolution noncontact atomic force microscope (NC-AFM) combined with a scanning tunneling microscope (STM), we have successfully obtained the sub-molecular resolution of a H(2)Pc self-assembled monolayer grown on a Pb(111) surface. A 2 × 2 superstructure was observed in both AFM and STM topographic images. The lateral critical force of removing a H(2)Pcmolecule from its SAM and moving a single H(2)Pc molecule on Pb(111) were measured. An oscillation of the critical force along the edge of the H(2)Pc SAM with a period of two molecular sites was observed, which can be attributed to the 2 × 2 superstructure. The lateral critical force caused by intermolecular interaction was found to be 25 pN on average and is typically two times larger than the molecule-substrate interaction.     

低维原子/分子晶体材料的可控生长、物性调控和原理性应用

本文介绍了高鸿钧课题组在物理所20年来的部分代表性工作.研究的主要方向为低维纳米功能材料的分子束外延可控制备、生长机制、物性调控及其在未来信息技术中的原理性应用.从材料的可控制备入手,结合第一性原理的理论计算,阐明材料生长机制和结构与物性的关系,进而实现物性调控和原理性应用.主要内容有:1)纳米尺度"海马"分形结构的形成及其生长机制;2)STM分辨率的提高及最高分辨Si(111)-7×7原子图像的获得;3)固体表面上功能分子的吸附、组装及其机制;4)稳定、重复、可逆的纳米尺度电导转变与超高密度信息存储;5)固体表面上单分子自旋态的量子调控及其原理性应用;6)原子尺度上朗德g因子的空间分辨及其空间分布不均匀性的发现;7)晶圆尺寸、高质量、单晶石墨烯的制备及原位硅插层绝缘化;8)几种新型二维原子晶体材料的可控构筑及其物性调控;9)"自然图案化"的新型二维原子晶体材料及其功能化.这些工作为低维量子结构的构造、物性调控及其原理性应用奠定了基础.     

Lateral and vertical manipulations of single atoms on the Ag(1 1 1) surface with the copper single-atom and trimer-apex tips

We study the lateral and vertical manipulations of single Ag and Cu atoms on the Ag(1 1 1) surface with the Cu single-atom and trimer-apex tips using molecular statics simulations. The reliability of the lateral manipulation with the Cu single-atom tip is investigated, and compared with that for the Ag tips. We find that overall the manipulation reliability (MR) increases with the decreasing tip height, and in a wide tip-height range the MR is better than those for both the Ag single-atom and trimer-apex tips. This is due to the stronger attractive force of the Cu tip and its better stability against the interactions with the Ag surface. With the Cu trimer-apex tip, the single Ag and Cu adatoms can be picked up from the flat Ag(1 1 1) surface, and moreover a reversible vertical manipulation of single Ag atoms on the stepped Ag(1 1 1) surface is possible, suggesting a method to modify two-dimensional Ag nanostructures on the Ag(1 1 1) surface with the Cu trimer-apex tip.     

用扫描隧道显微术进行单原子操纵的机理研究

本文简要综述利用扫描隧道显微镜（ＳＴＭ）进行单原子操纵的物理机制。主要介绍了场增强的扩散、在表面上拖动（ｐｕｌｉｎｇ）推动（ｐｕｓｈｉｎｇ）原子、原子在针尖表面间接触和近接触转移、场致蒸发／脱附、隧道电子非弹性射激发和电子迁移的“电子风力”等过程。同时介绍了一些理论处理方法和对一些实验结果的解释。