Synthesis and field emission of patterned ZnO nanorods

A simple and self-catalytic method has been developed for synthesizing finely patterned ZnO nanorods on ITO-glass substrates under a low temperature of 500 °C. The patterned ZnO nanorod arrays, a unit area is of 400 × 100 μm², are synthesized via vapor phase transport method. The surface morphology and composition of the as-synthesized ZnO nanorods are characterized by means of scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The mechanism of formation of ZnO nanorods is also discussed. The measurement of field emission (FE) reveals that the as-synthesized ZnO nanorods arrays have a turn-on field of 3.3 V/μm at the current density of 0.1 μA/cm² and a low threshold field of 6.2 V/μm at the current density of 1 mA/cm². So this approach must have a potential application of fabricating micropatterned oxide thin films used in FE-based flat panel displays.     

ZnO纳米线的合成与生长机理

采用化学气相沉积系统制备ZnO纳米线,以覆盖一层约5nm厚的Ag薄膜的单晶Si(001)为衬底,纳米线的生长遵循气-液-固(VLS)机理。对得到的样品采用X射线衍射(XRD)和扫描电镜(SEM)进行晶体结构和形貌的表征。XRD结果表明衬底温度在600~700℃时生长的ZnO纳米线具有六方结构和统一的取向。通过扫描电子显微镜分析,比较了生长温度对纳米线直径和长度的影响。实验表明我们可以通过催化剂和温度来实现ZnO纳米线生长的可控。与传统的VLS生长方式不同的是在我们制备的ZnO纳米线顶端并没有看到催化剂颗粒,表明纳米线的生长方式是底部生长,我们对其生长机理进行了研究。     

MOCVD方法生长的氧化锌薄膜及其发光特性

近年来,随着近紫外光发射氧化锌薄膜研究的进展,许多先进的薄膜生长手段被广泛采用。本文探索了用MOCVD方法在硅衬底上生长氧化锌薄膜的方法,试验了用几种不同的有机金属源生长ZnO薄膜;研究了源材料及生长压力和温度对薄膜生长的影响;观察了样品的室温光致发光光 谱。通过与溅射方法生长的ZnO薄膜的比较,提出了影响材料结构和发光特性的可能原因。     

Growth of ZnO nanodisk, nanospindles and nanoflowers for gas sensor: pH dependency

Suitable morphology for fast electron transportation is a crucial requirement for the fabrication of gas sensor application. Highly oriented and well defined zinc oxide (ZnO) nano/micro-scale structures are grown on the glass substrates using aqueous chemical route. The grown nanostructures have been characterized by X-ray diffraction pattern (XRD), scanning electron microscope (SEM) and optical absorption techniques. The SEM micrographs revealed the formation of disk, rod, spindle and flower-like morphologies at different pH values ranging from 5 to 10. The grown nanostructures were employed for acetone gas-sensing measurement. It is observed that the sensors based on nanoflowers showed higher response (95%) for acetone gas at 325 °C. The high acetone gas sensitivity of ZnO nanoflowers can be attributed to the surface morphology. Moreover, nanoflower-like structure exhibits the fast response and recovery.     

Twinned tabour-like ZnO: Surfactant-, template-free synthesis and gas sensing behaviors

The twinned tabour-like ZnO microstructures have been successfully synthesized via a solvothermal method without the assistant of any additive and template. The as-prepared products are characterized by X-ray diffraction, field emission scanning electron microscope, and high-resolution transmission electron microscope. The ZnO microcrystals grow symmetrically, and are wurtzite structure. The tabour, with a diameter of about 8.5 μm, grows along the c axis. The time-dependent morphology evolution of the ZnO microcrystal presents every single ZnO tabour is composed by many single crystal units. A possible formation mechanism of these complex hierarchical structures is investigated by adjusting the reaction time. In addition, the twinned ZnO tabours exhibit excellent ethanol-sensing properties at 250 °C. The highest response is 6.4-20 ppm ethanol. The response of the sensor rapidly increases with the increasing concentration of ethanol, until the ethanol reaching 200 ppm. The response of the sensor to 200 ppm ethanol is about 24.64 with the response time of 3 s.     

Photoluminescence study of pure and Li-doped ZnO thin films grown by sol-gel technique

The effect of annealing atmosphere, temperature and aging on the photoluminescence of pure and Li-doped ZnO thin films has been investigated. Annealing the pure ZnO in N₂ and He above 800 °C results in green emission centered at ca. 500 nm; however annealing in air red-shifts the green emission to 527 nm. The visible emission of the Li-doped ZnO is found to be largely dependent on the annealing atmosphere. Warm-white photoluminescence with a broad emission band covering nearly the whole visible spectrum is obtained for the Li-doped ZnO films annealed in helium. The substitutional and interstitial extrinsic point defects created by lithium doping may mediate the relative concentration of the intrinsic defects and thereby tune the intrinsic-defect-related visible emission. The enhanced intensity ratio of near-band-edge ultraviolet emission to deep-level visible emission with aging time may be ascribed to both in-diffusion of oxygen from air and self-diffusion of oxygen interstitials to heal the oxygen vacancies during the aging process.     

Synthesis and characterization of ZnO columns grown on MgO-coated silicon substrates by carbon-thermal evaporation

Zinc oxide columns have been grown on an MgO-coated silicon (111) substrate by the carbon-thermal evaporation method at 1050 °C. The MgO layer obtained from the substrate pre-dripped in Mg(NO₃)₂ solution by the use of a dropper can solve the troublesome lattice mismatch problem in the heteroepitaxy and promote the growth of ZnO columns effectively. The as-prepared ZnO structures were characterized by using X-ray diffraction (XRD), field-emission transmission electron microscope (FETEM), selection area electron diffraction (SAED), and photoluminescence (PL) spectrum. The results show that the columns are highly crystalline with the wurtzite hexagonal structure, and grow along the [0001] in the c-axis direction. Photoluminescence (PL) spectra of the as-synthesized microstructures exhibit broad green emission peaks at ∼514 nm. In addition, the growth mechanism of the two ZnO structures is discussed based on the analysis briefly based on the time-dependent experiment.     

PL and EL characterizations of ZnO:Eu, Li films derived by sol-gel process

ZnO:Eu³⁺, Li⁺ films prepared by the dip-coating method were characterized by photoluminescence (PL) and electroluminescence (EL). When the ZnO:Eu³⁺, Li⁺ films were excited using UV light with energy corresponding to the band-to-band excitation of the host matrix, the PL spectra showed emissions from both ZnO and Eu³⁺ ions, while their EL spectra showed emissions only from Eu³⁺ ions, and no emission from ZnO could be detected. It is found that the EL emission intensity B is dependent on the applied voltage, B=B_o exp(−bV^−1/2). With increasing frequency, the EL intensity dramatically increases at lower frequencies (<1000 Hz), and then increases gradually at higher frequencies (>1000 Hz).     

Synthesis and characterization of ZnO nano/microfibers thin films by catalyst free solution route

Zinc oxide (ZnO) nano/microfibrous thin films were successfully synthesized by a catalyst free solution route on glass and Si substrates. X-ray diffraction study revealed the formation of ZnO nanofibers of hexagonal crystalline structure. The texture coefficient of different planes varied with annealing temperature and that of the (0 0 2) plane was the highest for films annealed at temperature 873 K. Scanning electron micrograph showed the well formation of ZnO nano/microfibers with an average diameter 500 nm and having an average aspect ratio 150. UV–Vis–NIR spectroscopic study for the films deposited on glass substrates showed the high transmittance in the visible and near-infrared region. It was also observed that the band gap energy decreased as the films were annealed at higher temperature. The band gap energies of nanostructured ZnO thin films were determined to be in the range 3.03–3.61 eV. The photoluminescence study showed an UV emission peak at 397 nm, a visible blue–green emission peak at 468 nm and a green emission peak at 495 nm. Field emission properties of nanofiber ZnO thin film showed considerably low turn-on field around 1.4 V/μm. The emission current was as high as 70 μA at the field of 3.6 V/μm.     

ZnO and ZnS Nanostructures: Ultraviolet-Light Emitters,Lasers, and Sensors

ZnO and ZnS, well-known direct bandgap II–VI semiconductors, are promising materials for photonic, optical, and electronic devices. Nanostructured materials have lent a leading edge to the next generation technology due to their distinguished performance and efficiency for device fabrication. As two of the most suitable materials with size- and dimensionality-dependent functional properties, wide bandgap semiconducting ZnO and ZnS nanostructures have attracted particular attention in recent years. For example, both materials have been assembled into nanometer-scale visible-light-blind ultraviolet (UV) light sensors with high sensitivity and selectivity, in addition to other applications such as field emitters and lasers. Their high-performance characteristics are particularly due to the high surface-to-volume ratios (SVR) and rationally designed surfaces. This article provides a comprehensive review of the state-of-the-art research activities in ZnO and ZnS nanostructures, including their syntheses and potential applications, with an emphasis on one-dimensional (1D) ZnO and ZnS nanostructure-based UV light emissions, lasers, and sensors. We begin with a survey of nanostructures, fundamental properties of ZnO and ZnS, and UV radiation–based applications. This is followed by detailed discussions on the recent progress of their synthesis, UV light emissions, lasers, and sensors. Additionally, developments of ZnS/ZnO composite nanostructures, including core/shell and heterostructures, are discussed and their novel optical properties are reviewed. Finally, we conclude this review with the perspectives and outlook on the future developments in this area. This review explores the possible influences of research breakthroughs of ZnO and ZnS nanostructures on the current and future applications for UV light–based lasers and sensors.     

Growth and characteristics of hydrogenated In-doped ZnO thin films by pulsed DC magnetron sputtering

We investigated the role of hydrogen impurities in highly oriented In-doped ZnO (IZO:H) films. The conductivity of ZnO:H films exhibit small variation despite the increase of hydrogen ratio. The small variation of the carrier concentration in IZO:H films can be explained by the reduction of the oxygen deficiency for the charge neutrality and the increase of Vzn-H bonding for partially charge compensation in the films. The additional mode at 573 cm⁻¹ is interpreted as vacancy clusters. The discrepancy between the increase of vacancy clusters (573 cm⁻¹) and small variation of carrier concentration is attributed to the different physical characteristics of the IZO:H films due to the hydrogen existence between bulk and surface. The measured FT-IR peak at 3500 cm⁻¹ exhibits typical characteristic of O-H bonding.     

六角锥状ZnO纳米结构的生长机理、结构及光学性能

利用醋酸锌[Zn(CH3COO)2·2H2O]和六次甲基四胺(C6H12N4)以一定比例配置成反应溶液,通过水热合成法制备了六角锥状ZnO纳米结构。同时,使用了扫描电子显微镜(SEM)、X射线衍射和选区电子衍射(SAED),对样品的形貌与结构进行了分析。结果表明,样品形貌成六角锥状结构,并且在[002]方向择优生长。通过对样品的光学性能测试,由PL光谱分析可知,样品在379nm处有一个较强的紫外发光峰,并且在可见光区域产生了一些较弱的可见光发射峰,表明制备的六角锥状ZnO纳米结构的晶体质量不是很好。除此之外,对六角锥状ZnO的生长机理也进行了讨论。     

Synthesis of ZnO2 nanoparticles by laser ablation in liquid and their annealing transformation into ZnO nanoparticles

A pulsed laser emitting UV radiations generated by the third harmonic of Nd:YAG was applied for the synthesis of nano-structured ZnO₂ and ZnO. For the synthesis of nanoparticles of ZnO₂, a high-purity metallic plate of Zn target was fixed at the bottom of a glass cell, in the presence of deionized water mixed with oxidizing agent H₂O₂, under repeated laser irradiation. The optical properties, size and the morphology of the synthesized ZnO₂ and ZnO by laser ablation was influenced strongly by post-annealing conditions which is not previously reported. By annealing ZnO₂ at 200 °C for 8 h, the product (ZnO₂) synthesized primarily was converted completely to ZnO. By variation of the annealing temperatures from 200 to 600 °C, the grain size of ZnO changes from 5 to 19 nm with a change in lattice parameters, the band gap and some other optical properties of nano-ZnO.     

液相激光烧蚀合成ZnO及Zn/ZnO纳米颗粒及其光致发光性能

利用532 nm脉冲激光对沉浸在去离子水及十二烷基硫酸钠(SDS)水溶液中的金属锌靶进行液相激光烧蚀,合成了ZnO纳米颗粒和Zn/ZnO核壳结构的纳米粒子. 应用X射线衍射仪,透射电子显微镜,紫外可见光分光光度计和荧光光度计表征产物的微观结构和光学性能,并探讨其形成机理. 结果表明:在去离子水中分别烧蚀2 h和4 h生成的ZnO纳米粒子的平均粒径分别为43 nm和19 nm. 激光的长时间作用可以使纳米粒子粒径减小. 在0.005 mol/L的SDS水溶液中合成了Zn/ZnO核壳结构的纳米粒子,这是由于S 关键词： 脉冲激光烧蚀 ZnO纳米粒子 核壳结构 光致发光     

Synthesis, morphology and random laser action of ZnO nanostructures

Three-dimensional (3-D) ZnO random-wall nanostructures and one-dimensional (1-D) ZnO nanorods were prepared on silicon substrates by a simple solid-vapour phase thermal sublimation technique. Optical pumped random lasing has been observed in the ZnO random-wall arrays with a threshold intensity of 0.38 MW/cm² in the emission wavelength from 380 to 395 nm. The optical gain was attributed to the closed-loop scattering and light amplification of the ZnO random-wall. The experimental result suggests that the morphology of nanostructure is the key factor to effect random lasing.     

Transparent conductive ZnO:Al films grown by atomic layer deposition for Si-wire-based solar cells

Structural, electrical, and optical properties of atomic layer-controlled Al-doped ZnO (ZnO:Al) films grown by atomic layer deposition (ALD) on glass substrates were characterized at various growth temperatures for use as transparent electrodes. The Al atomic content in ZnO:Al films increased due to the reduced ZnO film growth rate with increasing temperature. The preferred orientation of ZnO:Al films was changed, and the optimum condition for best crystallinity was identified by varying the growth temperature. Furthermore, the carrier concentration of free electron was increased by substituting the Zn sites with Al atoms in the crystal, resulting from monolayer growth based on alternate self-limiting surface chemical reactions. The electrical resistivity of ZnO:Al film grown by ALD at 225 °C reached the lowest value of 8.45 × 10⁻⁴ Ω cm, with a carrier mobility of 9.00 cm² V⁻¹ s⁻¹ and optical transmittance of ∼93%. This result demonstrates that ZnO:Al films grown by ALD possess excellent potential for applications in electronic devices and displays as transparent electrodes and surface passivation layers.     

Preparation and characterization of n-type conductive (Al, Co) co-doped ZnO thin films deposited by sputtering from aerogel nanopowders

Highly transparent, n-type conducting ZnO thin films were obtained by low temperature magnetron sputtering of (Co, Al) co-doped ZnO nanocrystalline aerogels. The nanoparticles of ∼30 nm size were synthesized by a sol-gel method using supercritical drying in ethyl alcohol. The structural, optical and electrical properties of the films were investigated. The ZnO films were polycrystalline textured, preferentially oriented with the (0 0 2) crystallographic direction normal to the film plane. The films show within the visible wavelength region an optical transmittance of more than 90% and a low electrical resistivity of 3.5 × 10⁻⁴ Ω cm at room temperature.     

ZnO/MoO3 mixed oxide nanotube: A highly efficient and stable catalyst for degradation of dye by air under room conditions

As a continuation of our work to develop catalysts with high activity for catalytic air wet oxidation process under mild conditions, degradation of wastewater containing 0.3 g/L Safranin-T (ST) by air oxidation over ZnO/MoO₃ nanotube catalyst was studied. It was found the decolorization efficiency and the chemical oxygen demand (COD) removal of ST reached above 98% and 95%, respectively, within 18 min at room temperature and atmospheric pressure. And the organic pollutants were totally mineralized to simple inorganic species such as HCO₃⁻, Cl⁻ and NO₃⁻, while the total organic carbon (TOC) decreased 99.3%. The structure and morphology of the catalyst after ten cycling runs showed that the catalyst was stable under such operating condition and the leaching test showed negligible leaching effect. This ZnO/MoO₃ nanotube is proved to be an active and stable heterogeneous catalyst in CWAO of ST under extremely mild conditions.