An Enolate‐Mediated Organocatalytic Azide–Ketone [3+2]‐Cycloaddition Reaction: Regioselective High‐Yielding Synthesis of Fully Decorated 1,2,3‐Triazoles

An enolate‐mediated organocatalytic azide–ketone [3+2]‐cycloaddition (OrgAKC) reaction of a variety of enolizable arylacetones and deoxybenzoins with aryl azides was developed for the synthesis of fully decorated 1,4‐diaryl‐5‐methyl(alkyl)‐1,2,3‐triazoles in excellent yields with high regioselectivity at 25 °C for 0.5–6 h. This reaction has an excellent outcome with reference to reaction rate, yield, regioselectivity, operation simplicity, and availability of substrates and catalyst. This reaction has advantages over the previously known metal‐mediated reactions.     

A study of the scope and regioselectivity of the ruthenium-catalyzed [3 + 2]-cycloaddition of azides with internal alkynes

[3 + 2]-Cycloadditions of alkyl azides with various unsymmetrical internal alkynes in the presence of CpRuCl(PPh3)2 as catalyst in refluxing benzene have been examined, leading to 1,4,5-trisubstituted-1,2,3-triazoles. Whereas alkyl phenyl and dialkyl acetylenes undergo cycloadditions to afford mixtures of regioisomeric 1,2,3-triazoles, acyl-substituted internal alkynes react with complete regioselectivity. In addition, propargyl alcohols and propargyl amines were found to react with azides to afford single regioisomeric products.     

无金属和氧化剂温和条件下碱促进的烯胺酮碳-碳双键断裂合成NH2-结构脒类化合物

报道了室温条件下烯胺酮和磺酰叠氮通过碳-碳双键断裂合成N-磺酰基醚类化合物的方法.反应在1,8-二.氮杂双环[5.4.0]十一碳-7-烯(DBU)存在下进行,无需使用任何金属和氧化剂,具有良好的底物适用性.烯胺酮上的15N同位素标记实验证实,磺酰叠氮仅作为产物中的磺酰胺片段供体,同时,该实验也有力地支持反应机理涉及关键的1,2,3-三唑啉中间体的原位形成以及环分解.     

Ruthenium-catalyzed azide-alkyne cycloaddition: scope and mechanism

The catalytic activity of a series of ruthenium(II) complexes in azide-alkyne cycloadditions has been evaluated. The [Cp*RuCl] complexes, such as Cp*RuCl(PPh 3) 2, Cp*RuCl(COD), and Cp*RuCl(NBD), were among the most effective catalysts. In the presence of catalytic Cp*RuCl(PPh 3) 2 or Cp*RuCl(COD), primary and secondary azides react with a broad range of terminal alkynes containing a range of functionalities selectively producing 1,5-disubstituted 1,2,3-triazoles; tertiary azides were significantly less reactive. Both complexes also promote the cycloaddition reactions of organic azides with internal alkynes, providing access to fully-substituted 1,2,3-triazoles. The ruthenium-catalyzed azide-alkyne cycloaddition (RuAAC) appears to proceed via oxidative coupling of the azide and alkyne reactants to give a six-membered ruthenacycle intermediate, in which the first new carbon-nitrogen bond is formed between the more electronegative carbon of the alkyne and the terminal, electrophilic nitrogen of the azide. This step is followed by reductive elimination, which forms the triazole product. DFT calculations support this mechanistic proposal and indicate that the reductive elimination step is rate-determining.     

Synthesis of ethyl 4,5-disubstituted 2-azido-3-thiophenecarboxylates and use in the synthesis of thieno[3,2-e][1,2,3]triazolo[1,5-a]pyrimidin-5(4H)-ones

New heterocyclic azides, ethyl 2-azido-4-R¹-5-R²-3-thiophenecarboxylates, were synthesized by diazotization of 2-aminothiophenes and subsequent treatment with sodium azide. The reactions of these heterocyclic azides with β-ketoesters and activated acetonitriles were studied. The derivatives of thieno[3,2-e][1,2,3]triazolo[1,5-a]pyrimidine, a new ring system, were prepared in high yields via an anionic hetero-domino reaction.     

C60与叠氮化合物的单加成反应

本文从实验以及理论研究两方面介绍了C60与叠氧化合物的单加成反应。依照叠氮化合物的不同,C60与叠氮合物的单加成反应可分为烷基叠氮化物与C60的反应,酰基叠氧化物与C60的反应以及苯基叠氮化与C60的反应三类,而反应产物则为C60亚氨基[6,6]闭环衍生物和C60亚氨基[5,6]开环衍生物两类,不同类型的反应具有不同的反应机理,某些C60亚氨基[5,6]开环衍生物可以转化为C60亚氨基[6,6]闭环衍生物。本文还介绍了碳纳米管与叠氮化合物的加成反应。     

Photorearrangement of vinylidenecyclopropanes to 1,2,3-butatriene derivatives

[reaction: see text] Photoirradiation of benzene solutions containing 1-diarylvinylidene-2,2,3,3-tetramethylcyclopropanes (2a--d) afforded rearranged products 1,2,3-butatrienes (3a-d) in good to high yields. Photorearrangement from 2,2,3-trimethyl and 2,2- and 2,3-dimethyl derivatives 2e--g also proceeded, but the rates of the rearrangement were lower than those of 2a--d. A singlet mechanism is proposed for this photorearrangement, where alkyl migration occurs from 1,3-biradical intermediates generated via the homolysis of the C1-C2 bond. Generation of diarylvinylidene carbenes from 1,3-biradicals might be competitive with the formation of 3.     

Immobilized polytriazole complexes of copper(I) onto graphene oxide as a recyclable nanocatalyst for synthesis of triazoles

An efficient solid‐supported catalyst for the Huisgen [3 + 2] cycloaddition reaction between azides and alkynes was prepared from copper(I) iodide and 1,2,3‐triazole‐functionalized graphene oxide. This catalyst was then used for the efficient synthesis of β‐hydroxy‐1,2,3‐triazoles giving access to these products in excellent yields. In this protocol, the catalyst was shown to have high activity, air‐stability and recyclability. The formation of copper triazolide is very straightforward and energetically desirable. The catalyst can be isolated from copper‐catalysed azide–alkyne cycloaddition reactions.     

Exploring the Border between Concerted and Two‐Step Pathways of 1,3‐Dipolar Cycloadditions of Organic Azides to Cyclic Ketene N,X‐Acetals. – Synthesis and 15N‐NMR Spectra of Zwitterions and Spirocyclic Cycloadducts

Cyclic ketene N,X‐acetals 1 are electron‐rich dipolarophiles that undergo 1,3‐dipolar cycloaddition reactions with organic azides 2 ranging from alkyl to strongly electron‐deficient azides, e.g., picryl azide ( 2L ; R¹=2,4,6‐(NO₂)₃C₆H₂) and sulfonyl azides 2M – O (R¹=XSO₂; cf. Scheme 1). Reactions of the latter with the most‐nucleophilic ketene N,N‐acetals 1A provided the first examples for two‐step HOMO(dipolarophile)–LUMO(1,3‐dipole)‐controlled 1,3‐dipolar cycloadditions via intermediate zwitterions 3 . To set the stage for an exploration of the frontier between concerted and two‐step 1,3‐dipolar cycloadditions of this type, we first describe the scope and limitations of concerted cycloadditions of 2 to 1 and delineate a number of zwitterions 3 . Alkyl azides 2A – C add exclusively to ketene N,N‐acetals that are derived from 1H‐tetrazole (see 1A ) and 1H‐imidazole (see 1B , C ), while almost all aryl azides yield cycloadducts 4 with the ketene N,X‐acetals (X=NR, O, S) employed, except for the case of extreme steric hindrance of the 1,3‐dipole (see 2E ; R¹=2,4,6‐(^tBu)₃C₆H₂). The most electron‐deficient paradigm, 2L , affords zwitterions 16D , E in the reactions with 1A , while ketene N,O‐ and N,S‐acetals furnish products of unstable intermediate cycloadducts. By tuning the electronic and steric demands of aryl azides to those of ketene N,N‐acetals 1A , we discovered new borderlines between concerted and two‐step 1,3‐dipolar cycloadditions that involve similar pairs of dipoles and dipolarophiles: 4‐Nitrophenyl azide ( 2G ) and the 2,2‐dimethylpropylidene dipolarophile 1A (R, R=H, ^tBu) gave a cycloadduct 13 H , while 2‐nitrophenyl azide ( 2 H ) and the same dipolarophile afforded a zwitterion 16A . Isopropylidene dipolarophile 1A (R=Me) reacted with both 2G and 2 H to afford cycloadducts 13G , J ) but furnished a zwitterion 16B with 2,4‐dinitrophenyl azide ( 2I) . Likewise, 1A (R=Me) reacted with the isomeric encumbered nitrophenyl azides 2J and 2K to yield a cycloadduct 13L and a zwitterion 16C , respectively. These examples suggest that, in principle, a host of such borderlines exist which can be crossed by means of small structural variations of the reactants. Eventually, we use ¹⁵N‐NMR spectroscopy for the first time to characterize spirocyclic cycloadducts 10 – 14 and 17 (Table 6), and zwitterions 16 (Table 7).     

Photochemical reactions of [CH2(eta5-C5H4)2][Rh(C2H4)2]2 with silanes: evidence for Si-C and C-H activation pathways

Photochemical reaction of [CH2(eta5-C5H4)2][Rh(C2H4)2]2 1 with dmso led to the stepwise formation of [CH2(eta5-C5H4)2][Rh(C2H4)2][Rh(C2H4)(dmso)] 2a and [CH2(eta5-C5H4)2][Rh(C2H4)(dmso)]2 2b. Photolysis of 1 with vinyltrimethylsilane ultimately yields three isomeric products of [CH2(eta5-C5H4)2][Rh(CH2=CHSiMe3)2]2, 3a, 3b and 3c which are differentiated by the relative orientations of the vinylsilane. When this reaction is undertaken in d6-benzene, H/D exchange between the solvent and the alpha-proton of the vinylsilane is revealed. In addition evidence for two isomers of the solvent complex [CH2(eta5-C5H4)2][Rh(C2H4)2][Rh(C2H4)(eta2-toluene)] was obtained in these and related experiments when the photolysis was completed at low temperature without substrate, although no evidence for H/D exchange was observed. Photolysis of 1 with Et3SiH yielded the sequential substitution products [CH2(eta5-C5H4)2][Rh(C2H4)2][Rh(C2H4)(SiEt3)H] 4a, [CH2(eta5-C5H4)2][Rh(C2H4)(SiEt3)H]2 4b, [CH2(eta5-C5H4)2][Rh(C2H4)(SiEt3)H][Rh(SiEt3)2(H)2] 4c and [CH2(eta5-C5H4)2][Rh(SiEt3)2(H)2]2 4d; deuteration of the alpha-ring proton sites, and all the silyl protons, of 4d was demonstrated in d6-benzene. This reaction is further complicated by the formation of two Si-C bond activation products, [CH2(eta5-C5H4)2][RhH(mu-SiEt2)]2 5 and [CH2(eta5-C5H4)2][(RhEt)(RhH)(mu-SiEt2)2] 6. Complex 5 was also produced when 1 was photolysed with Et2SiH2. When the photochemical reactions with Et3SiH were repeated at low temperatures, two isomers of the unstable C-H activation products, the vinyl hydrides [CH2(eta5-C5H4)2][{Rh(SiEt3)H}{Rh(SiEt3)}(mu-eta1,eta2-CH=CH2)] 7a and 7b, were obtained. Thermally, 4c was shown to form the ring substituted silyl migration products [(eta5-C5H4)CH2(C5H3SiEt3)][Rh(SiEt3)2(H)2]2 8 while 4b formed [CH2(C5H3SiEt3)2][Rh(SiEt3)2(H)2]2 (9a and 9b) upon reaction with excess silane. The corresponding photochemical reaction with Me3SiH yielded the expected products [CH2(eta5-C5H4)2][Rh(C2H4)2][Rh(C2H4)(SiMe3)H] 10a, [CH2(eta5-C5H4)2][Rh(C2H4)(SiMe3)H]2 10b, [CH2(eta5-C5H4)2][Rh(C2H4)(SiMe3)H][Rh(SiMe3)2(H)2] 10c and [CH2(eta5-C5H4)2][Rh(SiMe3)2(H)2]2 10d. However, three Si-C bond activation products, [CH2(eta5-C5H4)2][(RhMe)(RhH)(mu-SiMe2)2] 11, [CH2(eta5-C5H4)2][(Rh{SiMe3})(RhMe)(mu-SiMe2)2] 12 and [CH2(eta5-C5H4)2][(Rh{SiMe3})(RhH)(mu-SiMe2)2] 13 were also obtained in these reactions.     

Synthesis of alpha-amino-alpha'-diazomethyl ketones via ring opening of substituted cyclopropanones with alkyl azides. A facile route to N-substituted 3-azetidinones

[reaction: see text] The reaction of alkyl azides with triethyl(1-methoxy-2, 2-dimethyl-cyclopropoxy)silane affords a series of alpha-amino-alpha'-diazomethyl ketones in moderate yields (38-54%). The mechanism of this novel process is discussed. The diazomethyl ketones could also be cyclized to the corresponding N-substituted 3-azetidinones in good yield upon treatment with Rh(2)(OAc)(4).     

Photoinduced cyclization of 3-acyl-2-halo-1-[(ω-phenylethynyl)alkyl]indoles to azaheterocyclo[1,2,3-lm]-fused benzo[c]carbazoles

A one-pot synthesis of azaheterocyclo[1,2,3-lm]-fused benzo[c]carbazoles (2 and 3) has been developed by photocyclization of 3-acyl-2-halo-1-[(ω-phenylethynyl)alkyl] indoles (1) in good to excellent yields. All products are formed from 1 via two sequential photocyclization reactions. Two products, 9-chloro-7,8-dihydro-6H-benzo[c]pyrido[1,2,3-lm]carbazole (2a-h) and 7,8-dihydro-6H-benzo[c]pyrido[1,2,3-lm]carbazole (3a-h), are produced in the photocyclization of 2-halo-1-[(ω-phenylethynyl)alkyl]indole-3-carbaldehydes (1a-h). In contrast, only products 2a-h are produced in the photocyclization of 3-acetyl-2-chloro-1-[(ω-phenylethynyl)alkyl]indole-3-carbaldehydes (1o-t). The 9-H in 3a-h (n = 2) does originate from the formyl group in 1a-h via 1,5-hydrogen shift. The structures of three new products, 9-bromo-7,8-dihydro-6H-benzo[c]pyrido[1,2,3-lm]carbazole (2b), 9-chloro-10-methyl-7,8-dihydro-6H-benzo[c]pyrido[1,2,3-lm]carbazole (3h) and 12-chloro-7,8-dihydro-6H-benzo[c]pyrido[1,2,3-lm]carbazole (2w), have been corroborated by single-crystal X-ray structural analyses.     

Effect of temperature on triazole and bistriazole formation through copper-catalyzed alkyne-azide cycloaddition

Temperature is an important factor in the copper catalyzed alkyne azide cycloaddition under oxidative conditions. 1,2,3-Triazoles were obtained in high yields when several alkynes and azides were reacted at methanol reflux using catalytic amounts of both copper iodide and sodium hydroxide. On the other hand, bistriazoles were major products when reactions were performed at −35 °C using excess sodium hydroxide.     

Base-promoted reactions of bridged ketones and 1,3- and 1,4-haloalkyl azides: competitive alkylation vs azidation reactions of ketone enolates

The reactions of 1,3- and 1,4-haloalkyl azides with enolates of 2-norbornanone (and a ring-expanded analog) afford polycyclic 1,2,3-triazolines in good yields. The reaction occurs by the initial azidation of the ketone enolate, followed in order by triazoline formation and O-alkylation. An interesting element of this process is the preferential reaction of the alkyl azide with an enolate anion as opposed to the more familiar reaction of the alkyl halide (including Cl and I derivatives). Reactions of acyclic or monocyclic enolates generally lead to 1,2,3-triazoles but none of the alternative C-alkylation product.     

Copper-catalyzed azide-alkyne cycloaddition reaction in water using cyclodextrin as a phase transfer catalyst

1,4-Disubstituted-1,2,3-triazoles were obtained in excellent yields from azides and terminal alkynes in H(2)O in the presence of catalytic amount of β-cyclodextrin as a phase transfer catalyst. Also, a one-pot CuAAC reaction was carried out successfully, affording 1,4-disubstituted-1,2,3-triazoles in good to high yields starting from an alkyl bromide, sodium azide, and terminal alkyne.     

Synthesis and properties of alkynethiolate gold(I) complexes

A series of alkynethiolate gold(I) derivatives have been synthesised by the cleavage of 4-monosubstituted 1,2,3-thiadiazoles in the presence of strong bases. The syntheses of the 1.2,3-thiadiazoles with p-cyanophenyl, p-tolyl, 2-thienyl, 3-thienyl and 9,9-dimethylfluoren-2-yl fragments are also described. All the complexes have been characterised by spectroscopic techniques and the complexes [Au(p-CH3-C6H4-C[triple bond]C-S)PPh3], [Au(3-C4H3S-C[triple bond]C-S)PPh3] and PPN[Au(p-CH3-C6H4-C[triple bond]C-S)(C6F5)] by X-ray analysis. The electrochemically polymerizable mononuclear bis(alkynethiolate) gold(I) complex PPN[Au(3-C4H3S-C[triple bond]C-S)2] is also described, including its electropolymerization and electrochemical properties.     

Carbon-carbon bond formation by radical addition-fragmentation reactions of O-alkylated enols

Alpha-tert-butoxystyrene [H2C=C(OBut)Ph] reacts with alpha-bromocarbonyl or alpha-bromosulfonyl compounds [R1R2C(Br)EWG; EWG =-C(O)X or -S(O2)X] to bring about replacement of the bromine atom by the phenacyl group and give R1R2C(EWG)CH2C(O)Ph. These reactions take place in refluxing benzene or cyclohexane with dilauroyl peroxide or azobis(isobutyronitrile) as initiator and proceed by a radical-chain mechanism that involves addition of the relatively electrophilic radical R1R2(EWG)C* to the styrene. This is followed by beta-scission of the derived alpha-tert-butoxybenzylic adduct radical to give But*, which then abstracts bromine from the organic halide to complete the chain. Alpha-1-adamantoxystyrene reacts similarly with R1R2C(Br)EWG, at higher temperature in refluxing octane using di-tert-amyl peroxide as initiator, and gives phenacylation products in generally higher yields than are obtained using alpha-tert-butoxystyrene. Simple iodoalkanes, which afford relatively nucleophilic alkyl radicals, can also be successfully phenacylated using alpha-1-adamantoxystyrene. O-Alkyl O-(tert-butyldimethylsilyl) ketene acetals H2C=C(OR)OTBS, in which R is a secondary or tertiary alkyl group, react in an analogous fashion with organic halides of the type R1R2C(Br)EWG to give the carboxymethylation products R1R2C(EWG)CH2CO2Me, after conversion of the first-formed silyl ester to the corresponding methyl ester. The silyl ketene acetals also undergo radical-chain reactions with electron-poor alkenes to bring about alkylation-carboxymethylation of the latter. For example, phenyl vinyl sulfone reacts with H2C=C(OBut)OTBS to afford ButCH2CH(SO2Ph)CH2CO2Me via an initial silyl ester. In a more complex chain reaction, involving rapid ring opening of the cyclopropyldimethylcarbinyl radical, the ketene acetal H2C=C(OCMe2C3H5-cyclo)OTBS reacts with two molecules of N-methyl- or N-phenyl-maleimide to bring about [3 + 2] annulation of one molecule of the maleimide, and then to link the bicyclic moiety thus formed to the second molecule of the maleimide via an alkylation-carboxymethylation reaction.     

Quenched gas-phase reactions of tetraborane(10), B4H10, with substituted alkynes: new nido-dicarbapentaboranes and arachno-monocarbapentaboranes

New alkyl derivatives of the nido-dicarbapentaborane, 1,2-C(2)B(3)H(7), and arachno-carbapentaborane, 1-CB(4)H(10), have been identified as the main volatile carbaborane products in quenched gas-phase reactions of tetraborane(10), B(4)H(10), with alkyl-substituted ethynes RC[triple bond]CR' (R = Me, Et, (n)Pr or (t)Bu, R' = H; R = Me or Et, R' = Me). The gaseous mixtures were heated at 70 degrees C, and monitored by gas-phase mass spectrometry. Each reaction was quenched when the ethyne was used up. The quenched gas-phase reaction of B(4)H(10) and Me(3)SiC[triple bond]CH gave a single volatile carbaborane product, 1-Me(3)Si-1,2-C(2)B(3)H(6).     

Synthesis and reactions of pyrido[3,2,1‐jk]carbazole‐4,6‐diones

Pyrido[3,2,1‐jk]carbazoles 1 , synthesized from carbazoles and alkyl‐ or arylmalonates, gave regioselective electrophilic substitution reactions at position 5 such as chlorination to 5‐chloro derivatives 2 , nitration to 5‐nitro compounds 3 , or hydroxylation to 5‐hydroxy derivatives 4 . 5‐Hydroxy compounds 4 gave on treatment with strong bases ring contraction to 5 , 6 or the ring opening product 7 . Exchange of the chloro group in 2 with azide or amines gave the corresponding azides 8 and the 5‐amino derivatives 9 and 10 . Alkylation of 1 with benzyl chloride or allyl bromide resulted in the formation of 5‐C‐alkylated products 11 together with 4‐alkyloxy derivatives 12 . J. Heterocyclic Chem., 48, 1039 (2011).     

Phosphine-mediated cascade reaction of azides with MBH-acetates of acetylenic aldehydes to substituted pyrroles: a facile access to N-fused pyrrolo-heterocycles

One-pot synthesis of substituted pyrroles by a cascade reaction of azides with Morita-Baylis-Hillman acetates of acetylenic aldehydes is described and the reaction is efficiently mediated by triphenyl phosphine at room temperature. Sodium azide is successfully used to provide N-unsubstituted pyrroles, while alkyl azides afforded the corresponding N-alkylated pyrroles through a sequence of allylic substitution/azide reduction/cycloisomerization reactions. The obtained products have provided a new entry to indolizino indoles, pyrrolo isoquinolines and 8-oxo-5,6,7,8-tetrahydroindolizine.