自聚焦透镜光斑直径,分辨率测试研究

通过显微镜放大、ＣＣＤ图像接收采集、计算机数据处理技术来测量自聚焦透镜（ＧＲＩＮ透镜）光斑直径、分辨率。重点对误差进行分析。通过对样品５２０－０２５－０８３的测试，表明该系统光斑直径、分辨率测试不确定度优于±０．１μｍ及１％，与误差分析相吻合。     

焦距法测试自聚焦透镜折射率分布常数

本文介绍了一种测量自聚焦透镜折射率分布常数的方法─—焦距法，并进行了原理公式推导，和精度分析，其测量不确定度为±１×１０￣（－３）；其次，简要地介绍了实验方法。实验结果证明了焦距法是测量自聚焦透镜折射率分布常数的简单实用的方法，它具有装置简单、数据处理也不复杂的特点，是一种非破坏性的测试方法。     

1.06μm激光辐照金盘靶的软X光转换

在１．０６μｍ激光辐照金盘靶实验中，利用坪响应Ｘ光二级管探测器测量了软Ｘ光能量（０．１－１．５ｋｅＶ）角分布，得到了软Ｘ光转换效率。实验条件：激光波长λＬ＝１．０６μｍ，ＥＬ＝６０－５００Ｊ，τｐｍ≈８００ｐｓ，ｆ／１．７，ＩＬ＝１０＾１＾３－１０＾１＾４Ｗ／ｃｍ＾２。实验结果表明：软Ｘ光能量角分粗略呈α＋ｂｃｏｓθ分布，软Ｘ光转换效率随激光强度的增加而降低。当靶面激光焦斑直径２３５μｍ，激光强度     

掺杂KNSBN晶体中的电子—空穴竞争

通过测量掺杂ＫＮＳＢＮ晶体光折变光栅记录和擦除动态特性，首次分析了掺杂ＫＮＳＢＮ晶体中的电子－空穴竞争，根据耦合波理论，指出，响应时间越快的晶体，电子－空穴竞争越激烈，因而导致净调制折射率越小，衍射效率赵低，最后，分析了空穴产生的原因，并估算有效载流子浓度为１０＾１５／ｃｍ＾３量级。     

具有位移和绝对距离测量能力的回馈干涉系统

提出一种基于半导体激光器泵浦Nd∶YAG微片激光器的回馈干涉系统，适合于非配合目标的位移和绝对距离测量。该测量系统包括移频回馈干涉光学系统，基于泵浦调制的微片激光器调频系统和相敏检波信号处理系统3部分。介绍了移频回馈干涉的原理，给出了位移测量和绝对距离测量应用的原理和测量方法，分析了测量的分辨率。实际测量了发黑工件表面的位移和绝对距离。实验结果表明，该回馈干涉系统灵敏度高，对被测表面反射率的要求很低，兼有对非配合目标的高分辨率位移测量和绝对距离测量的能力。     

基于共焦原理的反射式自聚焦光纤传感技术研究

基于共焦显微成象原理,提出了一种由自聚焦透镜和X型光纤组成的高精度反射式自聚焦光纤传感器.该传感器具有绝对位置跟踪的特殊能力,并有体积小、抗干扰性强、轴向分辨率高等特点.由实验分析得,其轴向分辨率可达30nm.可用于表面微观形貌、外形尺寸、曲面轮廓等测量领域.     

同步辐射束流尺寸测量干涉仪的设计与仿真

基于同步光的干涉法,是一种非拦截高精度的束流截面测量手段。相比传统成像法,干涉法可以测量更小的束团尺寸、分辨率更好,较短测量波长下有望获得亚μm级的分辨率,因此在同步辐射光源中得到广泛应用。对合肥光源HLS II的原有同步光干涉装置,提出了将原有的干涉光路中第一面聚焦透镜换成RC结构聚焦反射镜,第二面单透镜换成双胶合透镜,以达到在不改变光路光轴情况下减小色散和几何像差,从而提高光路成像质量的目的。采用几何光路设计方法对成像质量进行评价,并进行物理光学仿真计算,得到测量系统的干涉条纹。仿真结果表明:光学系统成像的艾里斑半径减小约35%,点列图的均方根半径减小了约99%,波前差也减小了约75%,调制传递函数（MTF）的截止频率提高了约65%,采用聚焦反射镜代替原有的聚焦透镜可大幅提升光路成像质量。     

微型差动式共焦自聚焦光聚焦探测系统

为解决微小内轮廓尺寸为代表的微小尺寸的非接触式超精密测量问题，提出了将自聚焦透镜体积小的特点与共焦显微技术的高分辨率和绝对位置跟踪特性相结合的差动式自聚焦共焦微型显微技术的光探测技术，建立了相应的传感系统，介绍了系统的工作原理和构成，自聚焦透镜测头直径为1mm，两个探测器差动设置，不但消除了光源的光强漂移和探测器的电子漂移产生的共模噪声，提高了测量信噪比，而且有效地提高了系统的轴向分辨率，初步实验表明，系统轴向分辨率在倾斜率小于20度的范围内可达5nm。     

基于衍射光栅的干涉式精密位移测量系统

介绍了基于几何莫尔条纹原理和衍射干涉原理的两种光栅精密位移测量系统及各自的特点。综述了国内外对光栅干涉式精密位移测量系统的研究进展,总结了系统存在的关键问题及发展趋势。光栅干涉式精密位移测量系统的优点是对环境要求小,测量分辨率和精度较高,结构紧凑,成本低。该系统需要解决的问题包括提高光栅以及光学元器件制造和安装精度;寻求一种更高精度的检测手段对光栅位移测量系统进行标定等。光栅干涉式精密位移测量系统的发展方向为更高测量分辨率和精度,大量程、多维度测量以及尺寸小巧。该系统在现代工业加工精密制造领域将具有更广阔的应用前景。     

PF—吐温—80分光光度法测定钼的方法研究

在０．０５－０．４ｍｏｌ．Ｌ＾－１盐酸溶液中，吐温－８０存在下，钼与苯基萤光酮生成橙色配合物，在该配合物的第二吸收峰测量，其表观摩尔吸光系数ε＝１．１×１０＾４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，测得配合物组成比为Ｍｏ＝ＰＦ＝１：１。在２５ｍＬ溶液中含钼０－８μｇ范围时遵守比耳定律。有色配合的稳定６ｈ以上。此法用于矿石中微量钼的测定，结果令人满意。     

A laser feedback interferometer with an oscillating feedback mirror

A method is proposed to solve the problem of direction discrimination for laser feedback interferometers.By vibrating the feedback mirror with a small-amplitude and high-frequency sine wave,laser intensity is modulated accordingly.The modulation amplitude can be extracted using a phase sensitive detector(PSD).When the feedback mirror moves,the PSD output shows a quasi-sine waveform similar to a laser intensity interference fringe but with a phase difference of approximately ±π/2.If the movement direction of the feedback mirror changes,the phase difference sign reverses.Therefore,the laser feedback interferometer offers a potential application in displacement measurement with a resolution of 1/8 wavelength and in-time direction discrimination.Without using optical components such as polarization beam splitters and wave plates,the interferometer is very simple,easy to align,and less costly.     

X‐ray focusing scheme with continuously variable lens

A novel hybrid X‐ray focusing scheme was developed for operation of the X‐ray streak camera at the Advanced Photon Source: an X‐ray lens focuses vertically from a long distance of 16 m and produces an extended focus that has a small footprint on an inexpensive sagittal mirror. A patented method is used to continuously adjust the focal length of the lens and compensate for chromatic dispersion in energy scans.     

Design of a mirror aberration corrector and a beam separator for LEEM

A SPLEEM (spin polarized low energy electron microscope) has been designed with a numerical simulation of electrostatic and magnetic field distributions and electron ray trajectories. Highly (more than 90%) spin polarized electron source has been used. A Wien type spin manipulator and a magnetic lens type spin rotator are used to align spin direction. A magnetic field free objective lens is designed to observe magnetic domain structure of magnetic materials. High or low magnification mode can be selected by using a combined electrostatic and magnetic objective lens for a high spatial resolution and a wide imaging area observation. An electrostatic mirror aberration corrector is installed after the image forming objective lens. A double deflection 45° beam separator is used to bend the direction of electrons from the source to the objective lens and from the objective lens to the mirror aberration corrector.     

A sinusoidal phase-modulating fiber-optic interferometer insensitive to the intensity change of the light source

In a conventional laser-diode sinusoidal phase-modulating (LD-SPM) interferometer, the wavelength of the LD is modulated by varying its injection current. The intensity modulation concurrent with the wavelength modulation leads to measurement errors. A photothermal-modulation method has been proposed to decrease the intensity change of the LD; however, this method cannot be used to measure vibration with a high frequency, and the beam diameter is too large to be used to measure minute objects. In this paper, we propose LD-SPM fiber-optic interferometer, in which the effect of the intensity change of the light source on measurement is eliminated. The diameter of the light beam is less than 0.5 mm. Using this interferometer, we measured displacements of a mirror driven by a piezoelectric transducer. The measurement repeatability is less than 1 nm.     

Measurement of the chief ray angle of mobile phone camera

The chief ray angle (CRA) of a mobile phone lens is related to the acceptance angle of the IR cutoff filter and micro lens array. The CRA of a lens need to be within an allowed value, otherwise image blurring or vignetting occurs. However, because of the compact size of mobile phone camera lenses, it is not easy to measure the CRA accurately. In this paper, we suggest a new method to measure the CRA of high-quality mobile phone camera lenses accurately using a laser beam as a light source and a plane mirror to collimate the beam in a double pass configuration. When the plane mirror is tilted to the same angle as the lens CRA, the spot center does not change, irrespective of the longitudinal position of the plane mirror. We manufactured the reference optics, which consisted of four spherical lenses, to verify our method. We found that our new CRA measurement method has 0.65° of measurement uncertainty for 15° CRA, which satisfies phone camera makers’ requirements.     

Heterodyne schlieren system

A new heterodyne technique for the quantitative analysis of schlieren images is described. The technique is based on phase measurements of signals generated by a photodetector observing the variations in light intensity caused by a traveling grating of slits located at the knife-edge plane of a conventional schlieren system. The phase of the signal is proportional to the displacement of the slit image on the knife-edge plane as a result of the light deflection passing through a phase object. The displacement is proportional to the ray deflection angle and hence to the local gradient of the index of refraction. The technique, which is quantitatively precise and sensitive, is demonstrated by measurement of deflections caused by a lens with a focal length of f = 20 m. A displacement of 0.22 mm and a deflection of an angle of 5.2 x 10(-4) rad were detected.     

Electromagnetic wave chaos in gradient refractive index optical cavities.

Electromagnetic wave chaos is investigated using two-dimensional optical cavities formed in a cylindrical gradient refractive index lens with reflective surfaces. When the planar ends of the lens are cut at an angle to its axis, the geometrical ray paths are chaotic. In this regime, the electromagnetic mode spectrum of the cavity is modulated by both real and ghost periodic ray paths, which also "scar" the electric field intensity distributions of many modes. When the cavity is coupled to waveguides, the eigenmodes generate complex series of resonant peaks in the electromagnetic transmission spectrum.     

A video camera system for coaxial observation of a sample with an incident soft X‐ray beam

A video camera system for observing a sample from the direction of an incident soft X‐ray beam has been developed. The sample is seen via two reflecting mirrors. The first mirror, which has a hole to allow the soft X‐ray beam to pass through, is set on the beam axis in a vacuum. The second mirror is used to cancel out the mirror inversion of the image. This camera system is used for efficient positioning of samples in a soft X‐ray beam.     

Anisotropic optical feedback of single frequency intra-cavity He--Ne laser

This paper presents the anisotropic optical feedback of a single frequency intra-cavity He--Ne laser. A novel phenomenon was discovered that the laser output an elliptical polarized frequency instead of the initial linear polarized one. Two intensities with a phase difference were detected, both of which were modulated in the form of cosine wave and a fringe shift corresponds to a λ/2 movement of the feedback mirror. The phase difference can be continuously modulated by the wave plate in the external cavity. Frequency stabilization was used to stabilize the laser frequency so as to enlarge the measuring range and improve the measurement precision. This anisotropic optical feedback system offers a potential displacement measurement technology with the function of subdivision of λ/2 and in-time direction judgment. The three-mirror Fabry--Perot cavity model is used to present the experimental results. Given the lack of need of lasing adjustment, this full intra-cavity laser can significantly improve the simplicity and stability of the optical feedback system.