Synthesis and Crystal Structure of 3,（5-Amino-4-ethoxycarbonyl-3-methylthio-1-H- pyrazolyl）-5-phenyl-1,2,4-triazine

1 INTRODUCTION Substituted 1,2,4-triazines represent an important class of nitrogen-containing heterocycles. The 1,2, 4-triazine core is a versatile synthetic platform to access a wide range of condensed heterocyclic ring systems via intramolecular Diels-Alder reactions with a vast array of dienophiles[1~5]. In addition, 1,2, 4-triazines have been associated with diverse activi- ties such as antihypertension and inhibition of pla- telets[6] and antiinflammatory[7], and been a key com- po…     

Regulation of geometry around the ruthenium center of bis(2-pyridinecarboxylato) complexes by the nitrosyl moiety: syntheses, structures, and theoretical studies

cis-[Ru(NO)Cl(pyca)(2)] (pyca = 2-pyridinecarboxylato), in which the two pyridyl nitrogen atoms of the two pyca ligands coordinate at the trans position to each other and the two carboxylic oxygen atoms at the trans position to the nitrosyl ligand and the chloro ligand, respectively (type I shown as in Chart 1), reacted with NaOCH(3) to generate cis-[Ru(NO)(OCH(3))(pyca)(2)] (type I). The geometry of this complex was confirmed to be the same as the starting complex by X-ray crystallography: C(13.5)H(13)N(3)O(6.5)Ru; monoclinic, P2(1)/n; a = 8.120(1), b = 16.650(1), c = 11.510(1) A; beta = 99.07(1) degrees; V = 1536.7(2) A(3); Z = 4. The cis-trans geometrical change reaction occurred in the reactions of cis-[Ru(NO)(OCH(3))(pyca)(2)] (type I) in water and alcohol (ROH, R = CH(3), C(2)H(5)) to form [[trans-Ru(NO)(pyca)(2)](2)(H(3)O(2))](+) (type V) and trans-[Ru(NO)(OR)(pyca)(2)] (type V). The reactions of the trans-form complexes, trans-[Ru(NO)(H(2)O)(pyca)(2)](+) (type V) and trans-[Ru(NO)(OCH(3))(pyca)(2)] (type V), with Cl(-) in hydrochloric acid solution afforded the cis-form complex, cis-[Ru(NO)Cl(pyca)(2)] (type I). The favorable geometry of [Ru(NO)X(pyca)(2)](n)(+) depended on the nature of the coexisting ligand X. This conclusion was confirmed by theoretical, synthetic, and structural studies. The mono-pyca-containing nitrosylruthenium complex (C(2)H(5))(4)N[Ru(NO)Cl(3)(pyca)] was synthesized by the reaction of [Ru(NO)Cl(5)](2)(-) with Hpyca and characterized by X-ray structural analysis: C(14)H(24)N(3)O(3)Cl(3)Ru; triclinic, Ponemacr;, a = 7.631(1), b = 9.669(1), c = 13.627(1) A; alpha = 83.05(2), beta = 82.23(1), gamma = 81.94(1) degrees; V = 981.1(1) A(3); Z = 2. The type II complex of cis-[Ru(NO)Cl(pyca)(2)] was synthesized by the reaction of [Ru(NO)Cl(3)(pyca)](-) or [Ru(NO)Cl(5)](2)(-) with Hpyca and isolated by column chromatography. The structure was determined by X-ray structural analysis: C(12)H(8)N(3)O(5)ClRu; monoclinic, P2(1)/n; a = 10.010(1), b = 13.280(1), c = 11.335(1) A; beta = 113.45(1) degrees; V = 1382.4(2) A(3); Z = 4.     

Synthesis and Crystal Structure of 1-（4-Bromobenzoyl）-3- [5-（E）-styryl-1,3,4-thiadiazol-2-yl]urea

1 INTRODUCTION 1,3,4-Thiadiazole derivatives represent an interes- ting class of compounds possessing broad spectrum biological activities[1~4]. Aroyl ureas are known to exhibit diverse biological effects, such as insecticidal, fungicidal, herbicidal and plant growth regulating activities[5~8]. Therefore, it is worthwhile to investi- gate the compounds incorporating both 1,3,4-thiadia- zole nucleus and aroyl urea group. In the previous paper[9], a series of aroyl ureas containing 1,3,4-t…     

New metalloligands [M(SC[O]Ph)(4)](-): synthesis and characterization of polymeric [A(MeCN)(x)[M(SC[O]Ph)(4)]] compounds (A = Li,Na and K; M = Ga and In; x = 0-2)

Exploiting the ability of the [M(SC[O]Ph)(4)](-) anion to behave like an anionic metalloligand, we have synthesized [Li[Ga(SC[O]Ph)(4)]] (1), [Li[In(SC[O]Ph)(4)]] (2), [Na[Ga(SC[O]Ph)(4)]] (3), [Na(MeCN)[In(SC[O]Ph)(4)]] (4), [K[Ga(SC[O]Ph)(4)]] (5), and [K(MeCN)(2)[In(SC[O]Ph)(4)]] (6) by reacting MX(3) and PhC[O]S(-)A(+) (M = Ga(III) and In(III); X = Cl(-) and NO(3)(-); and A = Li(I), Na(I), and K(I)) in the molar ratio 1:4. The structures of 2, 4, and 6 determined by X-ray crystallography indicate that they have a one-dimensional coordination polymeric structure, and structural variations may be attributed to the change in the alkali metal ion from Li(I) to Na(I) to K(I). Crystal data for 2 x 0.5MeCN x 0.25H(2)O: monoclinic space group C2/c, a = 24.5766(8) A, b = 13.2758(5) A, c = 19.9983(8) A, beta = 108.426(1) degrees, Z = 8, and V = 6190.4(4) A(3). Crystal data for 4: monoclinic space group P2(1)/c, a = 10.5774(7) A, b = 21.9723(15) A, c = 14.4196(10) A, beta = 110.121(1) degrees, Z = 4, and V = 3146.7(4) A(3). Crystal data for 6: monoclinic space group P2(1)/c, a = 12.307(3) A, b = 13.672(3) A, c = 20.575(4) A, beta = 92.356(4) degrees, Z = 4, and V = 3458.8(12) A(3). The thermal decomposition of these compounds indicated the formation of the corresponding AMS(2) materials.     

Synthesis, structure, and reactions of binuclear gold(I) complexes containing two different bridging ligands

The binuclear cycloaurated compounds [Au(2)(mu-C(6)H(3)-2-PPh(2)-n-Me)(2)] (n = 5, 1a; n = 6, 1b) react with the digold(I) complexes [Au(2)(mu-S(2)CN(n)()Bu(2))(2)] and [Au(2)(mu-dppm)(2)](PF(6))(2) to give heterobridged dinuclear complexes [Au(2)(mu-C(6)H(3)-2-PPh(2)-n-Me)(mu-S(2)CN(n)Bu(2))] (n = 5, 5a; n = 6, 5b) and [Au(2)(mu-C(6)H(3)-2-PPh(2)-n-Me)(mu-dppm)]PF(6), (n = 5, 9a; n = 6, 9b), respectively. Complex 5a exists in the solid state as an infinite zigzag chain of dimeric units with intramolecular Au-Au separations of 2.8331(3) and 2.8243(3) A for independent molecules and intermolecular Au-Au separations of 3.0653(3) and 3.1304(3) A. Both 5a and 5b undergo oxidative addition with halogens to give the heterovalent, gold(I)-gold(III) compounds [XAu(I)(mu-2-Ph(2)PC(6)H(3)-n-Me)Au(III)X(eta(2)-S(2)CN(n)Bu(2))] [n = 5, X = Cl (6a), I (8a); n = 6, X = Cl (6b), Br (7b), I (8b)]. Compound 8a has been shown by X-ray crystallography to contain a gold(III) atom coordinated in a planar array by bidentate, chelating di-n-butyldithiocarbamate, iodide, and the sigma-aryl carbon atom, together with a gold(I) atom that is linearly coordinated by the phosphorus atom of the arylphosphine and by iodide. The intramolecular gold-gold distance of 3.2201(3) A indicates little or no interaction between the metal atoms. In contrast to the behavior of the homobridged complexes 1a and 1b, the heterobridged dithiocarbamate complexes 5a and 5b give structurally similar products on reaction with halogens, irrespective of the position of the ring methyl substituent. Crystal data for [Au(2)(mu-C(6)H(3)-2-PPh(2)-5-Me)(mu-S(2)CN(n)Bu(2))] (5a): triclinic, space group P1 (No. 2), with a = 11.3398(1), b = 15.9750(2), c = 16.4400(3) A, alpha = 91.0735(9), beta = 109.3130(7), gamma = 90.7666(8) degrees, V = 2809.47(6) A(3), and Z = 4. Crystal data for [IAu(I)(mu-2-Ph(2)PC(6)H(3)-5-Me)Au(III)I(eta(2)- S(2)CN(n)Bu(2))] (8a): triclinic, space group P1 (No. 2), with a = 8.6136(2), b = 9.3273, c = 21.1518(4) A, alpha = 84.008(1), beta = 84.945(1), gamma = 75.181(1) degrees, V = 1630.54(6) A(3), and Z = 2.     

Two-dimensional Supramolecular Structure of a Mercury（Ⅱ） Iodide Complex with Organosulfide

A mercury（Ⅱ） iodide complex with organosulfide [Hg（pymt）（pymtH）I] 1 （pymt = the anion of pyrimidine-2-thiolate） has been synthesized by slow evaporation of the solution at room temperature and structurally characterized by single-crystal X-ray diffraction. Basic ideas and data collected are given. X-ray diffraction analysis reveals that complex 1 is mononuclear. Crystallographic data： C8H7HgIN4S2, Mr = 550.79, monoclinic system, space group P21/c, a = 11.218（4）, b = 9.551（3）, c = 15.877（4） A^°, β = 129.697（15）°, V = 1308.9（7） A^°^3, Z = 4, Mr = 550.79, Dc = 2.795 g/cm^3, F（000） = 995, μ（MoKa） = 14.415 mm^-1, 2（MoKa） = 0.71073 A^°, T= 293（2） K, 2θmax = 54.9°, GOOF= 1.053, the final R = 0.0310 and wR = 0.0742 for 2547 observed reflections with I 〉 2σ（I） （refinement on F^2）. Complex 1 is connected through hydrogen bonds to give a one-dimensional supramolecular chain structure. Furthermore, π-π interactions are also found between the pyrimidine rings with the center-to-center distances of 3.439（4） and 3.603（4） A^°, so complex 1 expands the chains into a two-dimensional network.     

Synthesis and characterization of six new quaternary actinide thiophosphate compounds: Cs(8)U(5)(P(3)S(10))(2)(PS(4))(6)(,) K(10)Th(3)(P(2)S(7))(4)(PS(4))(2), and A(5)An(PS(4))(3), (A = K, Rb, Cs; An = U, Th)

Six new actinide metal thiophosphates have been synthesized by the reactive flux method and characterized by single-crystal X-ray diffraction: Cs(8)U(5)(P(3)S(10))(2)(PS(4))(6) (I), K(10)Th(3)(P(2)S(7))(4)(PS(4))(2) (II), K(5)U(PS(4))(3) (III), K(5)Th(PS(4))(3) (IV), Rb(5)Th(PS(4))(3) (V), and Cs(5)Th(PS(4))(3) (VI). Compound I crystallizes in the monoclinic space group P2(1)/c with a = 33.2897(1) A, b = 14.9295(1) A, c = 17.3528(2) A, beta = 115.478(1) degrees, Z = 8. Compound II crystallizes in the monoclinic space group C2/c with a = 32.8085(6) A, b = 9.0482(2) A, c = 27.2972(3) A, beta = 125.720(1) degrees, Z = 8. Compound III crystallizes in the monoclinic space group P2(1)/c with a = 14.6132(1) A, b = 17.0884(2) A, c = 9.7082(2) A, beta = 108.63(1) degrees, Z = 4. Compound IV crystallizes in the monoclinic space group P2(1)/n with a = 9.7436(1) A, b = 11.3894(2) A, c = 20.0163(3) A, beta = 90.041(1) degrees, Z = 4, as a pseudo-merohedrally twinned cell. Compound V crystallizes in the monoclinic space group P2(1)/c with a = 13.197(4) A, b = 9.997(4) A, c = 18.189(7) A, beta = 100.77(1) degrees, Z = 4. Compound VI crystallizes in the monoclinic space group P2(1)/c with a = 13.5624(1) A, b = 10.3007(1) A, c = 18.6738(1) A, beta = 100.670(1) degrees, Z = 4. Optical band-gap measurements by diffuse reflectance show that compounds I and III contain tetravalent uranium as part of an extended electronic system. Thorium-containing compounds are large-gap materials. Raman spectroscopy on single crystals displays the vibrational characteristics expected for [PS(4)](3)(-), [P(2)S(7)](4-), and the new [P(3)S(10)](5)(-) building blocks. This new thiophosphate building block has not been observed except in the structure of the uranium-containing compound Cs(8)U(5)(P(3)S(10))(2)(PS(4))(6).     

Crystal Structure of Phenol,2-[4（S）-4-Dihydro-4-benzyl-2-ozazolinyl]

The compound phenol,2-[4(S)-4,5-dihydro-4-phenyl-2-ozazolinyl(1,C15H13NO2) was synthesized with a simple,one step method free of water and air.It was obtained in a moderate yield from the reaction of 2-hydroxybenzonitrile with optically active amino alcohol in chloroben-zene under dry,anaerobic conditions.It belongs to the orthorhombic system,space group P212121 with a = 5.786(5),b = 10.730(5),c = 19.722(5),C15H13NO2,Mr = 239.26,V = 1224.4(12)3,Z = 4 and Dc = 1.298 mg/m3.The final R = 0.0324 for 1627 observed reflections with Ⅰ 2σ(Ⅰ) and Rw = 0.0826 for all data.The structure of compound 1 was determined by X-ray diffraction,NMR and HRMS.     

Syntheses and Crystal Structures of 4-Amino-3- （3-hyd roxyp ropyl）- 1H-1,2,4-triazole-5（4H）-thione and 6-（4-Biphenylyl）-3-（3-hydroxypropyl）-7H-1,2,4-triazolo[3,4-b][1,3,4]thiadiazine

1INTRODUCTION It has been reported that3,6-disubstituted-7H-1,2,4-triazolo[3,4-b][1,3,4]thiadiazines have a broad spec-trum of bioactivities,such as antimicrobial[1],antibac-terial,antifungal[2],anti-inflammatory[3],diuretic[4],an-thelmintic and analgesic[5].They can also be used as plant-growth regulating agents[6],photographic coup-lers,dyes for improved preservability and absorption characteristics,and inhibitors of malignant cellularZOU K.H.et al.:Syntheses and Crystal Structures o…     

Chemistry of the Si-Si and Fe-Fe bonds in the cyclic structure (Me2SiSiMe2)[eta5-C5H4FeCO2]2. Selective cleavage of the Fe-Fe bond by I2 and unexpected properties of the iodide

The Si-Si bond in the title cyclic structure (1) exhibited unexpected stability toward I(2). Thus, the reaction of 1 with 1 equiv of I(2) in chloroform resulted in selective cleavage of the Fe-Fe bond to afford diiodide (Me(2)SiSiMe(2))[eta(5)-C(5)H(4)Fe(CO)(2)I](2) (2) with retention of the Si-Si bond. When excess (2-4 equiv) I(2) was used to react with 1 in either benzene or chloroform, iodonium-bridged diiron complex [(Me(2)SiSiMe(2))[eta(5)-C(5)H(4)Fe(CO)(2)](2)I(+)](I(5)(-)) (4) was obtained, in which the Si-Si bond was still retained. It is noteworthy that 4 contains a counteranion I(5)(-) rather than the expected I(3)(-), which is the first example for an iodonium-bridged diiron complex to combine a polyiodide anion larger than I(3)(-). UV irradiation of 2 did not affect the stability of the silicon-silicon bond and, in the presence of PR(3), resulted in CO substitution to give (Me(2)SiSiMe(2))[eta(5)-C(5)H(4)Fe(CO)(PR(3))I](2) (5, R = Ph; 6, R = OPh). The molecular structure of 2 was determined by the X-ray diffraction method. It is noteworthy that the structure of 2 does not take the expected anti conformation but adopts a gauche one. The length of the Si-Si bond of 2 [2.353(3) A] is about the same as that of 1 [2.346(4) A], which can be direct evidence to demonstrate that the Si-Si bond in the cyclic structure of 1 is not subject to significant ring strain. The molecular structure of 4 was also determined by the X-ray diffraction method. It is noted that the structure of 4 contains an abnormally large Fe-I(+)-Fe bond angle of 121.25(7) degrees. Of particular interest is the observation that the I(5)(-) anions of 4 are self-assembled into novel layered, two-dimensional networks with the (Me(2)SiSiMe(2))[eta(5)-C(5)H(4)Fe(CO)(2)](2)I(+) cations as the template.     

Synthesis and X-ray characterization of the phosphido-carbonyl cluster anions

The [Co(9)P(CO)(21)](2)(-) anion has been isolated from the products of the reaction between Na[Co(CO)(4)] and PCl(5) in tetrahydrofuran at reflux. The structure of the cluster anion [Co(9)P(CO)(21)](2)(-) in its tetraphenylphosphonium salt has been elucidated by X-ray analysis. The crystals are monoclinic, space group P2(1)/n, a = 12.528(3), b = 14.711(5), c = 19.312(6) A, beta = 93.68(2) degrees, Z = 2. Final R = 0.065 for 2300 unique reflections having I > 3sigma(I). The anion, which is disordered about an inversion center, consists of a monocapped square antiprismatic cluster containing an interstitial phosphide and surrounded by 13 terminal and 8 edge-bridging carbonyl ligands. Average values are: Co-Co 2.685 A, and Co-P 2.256 A. The [Co(10)P(CO)(22)](3)(-) anion has been obtained by condensation of the [Co(9)P(CO)(21)](2)(-) anion with [Co(CO)(4)](-) in tetrahydrofuran at reflux. While the [Co(9)P(CO)(21)](2)(-) anion is stable under CO, the [Co(10)P(CO)(22)](3)(-) anion is decomposed to [Co(9)P(CO)(21)](2)(-) and [Co(CO)(4)](-). The benzyltrimethylammonium salt of the [Co(10)P(CO)(22)](3)(-) anion has been studied by X-ray analysis. It gives triclinic crystals, space group P_1, a = 11.452(3), b = 23.510(6), c = 25.606(4) A, alpha = 112.46(1), beta = 95.79(1), gamma = 73.548(2) degrees, Z = 4. Final R = 0.041 for 8600 unique reflections having I > 3sigma(I). There are two independent trianions in the asymmetric unit, both showing similar geometries, consisting of bicapped square antiprismatic clusters with a central P atom, each bearing 10 terminal and 12 edge-bridging carbonyl ligands, 8 of which, bound to the capping metals, are markedly asymmetric. Average values are: Co-Co 2.678 A, and Co-P 2.262 A. Electrochemistry shows that [Co(9)P(CO)(21)](2)(-) and [Co(10)P(CO)(22)](3)(-) in acetonitrile solution undergo either a one-electron oxidation or a two-electron reduction. This latter process appears as a single step in the case of the dianion and as two separated one-electron steps in the case of the trianion. All the processes are accompanied by slow chemical complications, thus testifying that no stable redox congeners exist for these phosphide clusters.     

Synthesis and Crystal Structure of 4-Azido-2,2,6,6-Tetramethylpiperidine-1-oxyl Free Radical

1 INTRODUCTION Stable nitroxyl radicals are widely used in mole- cular biology, molecular pharmacology and phar- macy for noninvasive characterization of enzymes, receptors and drug delivery systems[1, 2]. They are al- so applied to examine the active center topography, the penetration of water, microviscosity, micropolo- rity, PH and oxygen concentration of their surroun- ding as well as spin carriers due to their exceptional stability and ease of chemical modification[3, 4]. However, th…     

2(S),3(R)-二羟基甲基-N-环己基氮杂环丙烷的合成及其晶体结构

合成了5-(R)-(1R,2S,5R)-孟氧基丁内酯并[3,4-b]-2(S)-6(R)-1-N-环己基氮杂环丙烷(3)和2(S),3(R)-二羟基甲基-N-环己基氮杂环丙烷(4),其晶体结构经四圆单晶X-射线衍射仪测定。3属三斜晶系,p1空间群,a=5.438(11),b=8.117(2),c=11.572(2),Mr=335.47,α=96.84(3)°,β=94.48(3)°,γ=101.86(3)°,V=493.5(2)3,Z=1,Dc=1.129g·cm-3,μ=0.074mm-1,F(000)=184,R=0.086,wR=0.2344,1527个独立衍射点。4属单斜晶系,P2(1)/n空间群,a=8.0915(15),b=7.2055(13),c=18.6120(3),Mr=185.26,β=102.086(2)°,V=1061.1(3)3,Z=4,Dc=1.160g·cm-3,μ=0.080mm-1,F(000)=408,R=0.0466,wR=0.1224,1485个独立衍射点。4分子中存在两种分子间氢键。     

Synthesis and Crystal Structure of Trans-4-[(5-(2,4-Dichlorophenoxy)-3-methyl-1-phenyl-1H-pyrazol-4-yl)methyleneamino]-1,5-dimethyl-2-phenyl-1,2-dihydropyrazol-3-one

The title compound trans-4-[(5-(2,4-dichlorophenoxy)-3-methyl-1-phenyl-1H-pyra-zol-4-yl)methyleneamino]-1,5-dimethyl-2-phenyl-1,2-dihydropyrazol-3-one 3 (C28H23Cl2N5O2, Mr = 532.41) has been synthesized and its crystal structure was determined by single-crystal X-ray diffraction analysis. It crystallizes in triclinic, space group P1 with a = 8.9438(4), b = 11.6065(5), c = 14.2215(6) , α = 112.566(1), β = 92.324(2), γ = 102.91(1)o, V = 1315.65(10) 3, Z = 2, Dc = 1.344 g/cm3, μ(MoKα) = 0.282 mm-1, λ = 0.71073 , F(000) = 552, the final R = 0.0587 and wR = 0.1578 for 5071 observed reflections (I > 2σ(I)). X-ray analysis reveals that the product is a thermodynamically stable trans isomer. Intra-and intermolecular C(12)-H(12)···O(1) and C(28)-H(28)···O(1)#1 hydrogen bonds were observed in the title compound.     

Syntheses and Crystal Structures of Two Gd（Ⅲ） Hydrogen Supramolecules Based on p-Sulfonatothiacalix[4]arene

Two novel polymeric complexes, [Gd（HsTCAS）（H2O）7]·4H2O 1 and [Gd（HsTCAS） （CH3COCH3）（H2O）6]·6H2O 2 （H4TCAS = p-sulfonatothiacalix[4]arene）, have been synthesized and characterized by single-crystal X-ray diffraction analyses. Complex 1 crystallizes in monoclinic, space group C2/m with a = 20.2308（12）, b = 19.0894（10）, c = 12.2448（7）A, β = 101.847（3）°, V = 4628.1（5）A^3, C24H43GdO27S8, Mr = 1169.25, Z = 4, Dc = 1.690 g/cm^3, F（000） = 2380,μ = 1.879 mm^-1, the final R = 0.0404 and wR = 0.1038 for 5127 observed reflections with I 〉 2σ（I）. Complex 2 is pseudo-isostructural with complex 1.     

Enamine Configuration of 5-Methyl-2-phenyl-4-[（Z）-3-tolylamino-phenylmethylene]pyrazol-3（2H）-one

1 INTRODUCTION In contrast to the old-line academic and practical studies of 1-phenyl-3-methyl-4-benzoyl-5-pyrazo- lone (PMBP) on the metal coordination chemistry[1], the complexes of β-ketoamines derivated from PMBP received little attention due to its complicated com- plexation. However, in recent years, there has a sudden growth of this area as a result of its timely interest in biological activities[2]. Recently, a series of β-ketoamines[3] containing PMBP have been prepared fro…     

Gold(I) phosphido complexes: synthesis, structure, and reactivity

Deprotonation of the phosphine complexes Au(PHR(2))Cl with aqueous ammonia gave the gold(I) phosphido complexes [Au(PR(2))](n)() (PR(2) = PMes(2) (1), PCy(2) (2), P(t-Bu)(2) (3), PIs(2) (4), PPhMes (5), PHMes (6); Mes = 2,4,6-Me(3)C(6)H(2), Is = 2,4,6-(i-Pr)(3)C(6)H(2), Mes = 2,4,6-(t-Bu)(3)C(6)H(2), Cy = cyclo-C(6)H(11)). (31)P NMR spectroscopy showed that these complexes exist in solution as mixtures, presumably oligomeric rings of different sizes. X-ray crystallographic structure determinations on single oligomers of 1-4 revealed rings of varying size (n = 4, 6, 6, and 3, respectively) and conformation. Reactions of 1-3 and 5 with PPN[AuCl(2)] gave PPN[(AuCl)(2)(micro-PR(2))] (9-12, PPN = (PPh(3))(2)N(+)). Treatment of 3 with the reagents HI, I(2), ArSH, LiP(t-Bu)(2), and [PH(2)(t-Bu)(2)]BF(4) gave respectively Au(PH(t-Bu)(2))(I) (14), Au(PI(t-Bu)(2))(I) (15), Au(PH(t-Bu)(2))(SAr) (16, Ar = p-t-BuC(6)H(4)), Li[Au(P(t-Bu)(2))(2)] (17), and [Au(PH(t-Bu)(2))(2)]BF(4) (19).     

配位聚合物{Zn[(BTDC)_2(DMF)_2]}_4·(DMF)_4的合成及其晶体结构

2,2′-联二噻吩-5,5′-二羧酸(H2BTDC)与硝酸锌经水热合成制得新型配位聚合物{Zn[(BTDC)2(DMF)2]}4.(DMF)4(1),其结构经X-射线单晶衍射和元素分析表征。1属单斜晶系,空间群P2(1)/c,晶胞参数a=6.5913(13),b=22.813(5),c=16.315(3),V=2 450.5(9)3,Z=4,F(000)=1 112,cρalcd=1.455 g.cm-3,R1=0.040 2,wR2=0.082 4[I2σ(I)]。晶胞中每个锌原子与两个配体、两个配位的DMF溶剂分子和一个自由的DMF分子配位,共同组成zigzag一维链状结构。     

Synthesis and Crystal Structure of [Cp_2Ln(OC(SEt)NPh )]_2

1 INTRODUCTION The insertion of unsaturated molecules into the lanthanide-ligand bond has attracted considerable attention, because it is a fundamental step for many metal-promoted transformations, in which some va- luable new methods for the formation of carbon- carbon and carbon-heteroatom bonds can be deve- loped and some complexes with novel structures or peculiar characters can be obtained[1~4]. Notably, in contrast to the wide reaction chemistry of organo- lanthanide alkyl (aryl), am…     

Rb(4)Hg(5)(Te(2))(2)(Te(3))(2)Te(3), [Zn(en)3](4)In(16)(Te2)4(Te3)Te22, and K2Cu2(Te2)(Te3): novel metal polytellurides with unusual metal-tellurium coordination

Three novel metal polytellurides Rb(4)Hg(5)(Te(2))(2)(Te(3))(2)Te(3) (I), [Zn(en)(3)](4)In(16)(Te(2))(4)(Te(3))Te(22) (II), and K(2)Cu(2)(Te(2))(Te(3)) (III) have been prepared by solvothermal reactions in superheated ethylenediamine at 160 degrees C. Their crystal structures have been determined by single-crystal X-ray diffraction techniques. Crystal data for I: space group Pnma, a = 9.803(2) A, b = 9.124(2) A, c = 34.714(7) A, Z = 4. Crystal data for II: space group C2/c, a = 36.814(7) A, b = 16.908(3) A, c = 25.302(5) A, beta = 128.46(3) degrees, Z = 4. Crystal data for III: space group Cmcm, a = 11.386(2) A, b = 7.756(2) A, c = 11.985(2) A, Z = 4. The crystal structure of I consists of 1D infinite ribbons of [Hg(5)(Te(2))(2)(Te(3))(2)Te(3)](4-), which are composed of tetrahedral HgTe(4) and trigonal HgTe(3) units connected through the bridging Te(2-), (Te(2))(2-), and (Te(3))(2-) ligands. II is a layered compound containing InTe(4) tetrahedra that share corners and edges via Te, Te(2), and Te(3) units to form a 2D slab that contains relatively large voids. The [Zn(en)(3)](2+) template cations are filled in these voids and between the slabs. The primary building blocks of III are CuTe(4) tetrahedra that are linked by intralayer (Te(3))(2-) and interlayer (Te(2))(2-) units to form a 3D network with open channels that are occupied by the K(+) cations. All three compounds are rare polytelluride products of solvothermal reactions that contain both Te(2) and Te(3) fragments with unusual metal-tellurium coordination.