Anion-exchange separation of gallium from indium,thallium, aluminium and other elements in malonic acid

Summary Systematic studies of gallium on Dowex-21K in malonate media are reported. On the basis of the value of the elution constant (E) it was separated from large number of metal ions. By selective sorption it was separated from the alkalis, alkaline earths, bismuth, thallium (I), mercury (II), iron (II) and germanium (IV). With water as eluant it was separated from cobalt, nickel, zinc, manganese and palladium, with ammonium chloride it was possible to separate it from copper, iron and vanadium, and with a specific eluant it was separated from lead and zirconium. Finally the sequential separation of gallium from thallium, aluminium and indium was accomplished.     

Hydrogen Evolution from Glucose with the Combination of Glucose Dehydrogenase, Ferredoxin NADP Reductase and Hydrogenase from A. Eutrophus H16

Hydrogen evolution system from glucose consisting of glucose dehydrogenase from Bacillus sp., ferredoxin NADP reductase from spinach leaves and hydrogenase from Alcaligenes eutrophus H16 was established. When the solution containing glucose, glucose dehydrogenase, NAD, ferredoxin NADP reductase, methyl viologen and hydrogenase was incubated at 30°C, hydrogen evolution was observed.     

Deposition characteristics of γ-ureidopropyltrimethoxysilane onto E-glass fibres using toluene and carbon tetrachloride as carrier solvents

Industrial grade γ-ureidopropyltrimethoxysilane was adsorbed onto industrial grade E-glass fibres from toluene and carbon tetrachloride at 23 °C. The treated surfaces were characterised using thermogravimetry, diffuse reflectance Fourier transform IR spectroscopy, electron spectroscopy for chemical analysis, scanning electron microscopy and the zeta potential. When ureidosilane was deposited from toluene and CCl₄, both of which have very low hydrogen-bonding ability, a ureido surface was obtained. The ureidosilane deposited from CCl₄ hydrolysed at the surface and condensed to form a solvent-swollen Si–O–Si network. The ureidosilane deposited from toluene also hydrolysed at the E-glass surface. Condensation of the silane deposited from toluene was not apparent. Aluminium dissolved from the E-glass surface was condensed into the network of the silane deposited from CCl₄. Aluminium was not detected at the surface of the samples with ureidosilane deposited from toluene. Received: 10 November 2000 Accepted: 23 March 2001     

Low-molecular-weight poly(alpha-methyl beta,L-malate) of microbial origin: synthesis and crystallization

Low-molecular-weight poly(alpha-methyl beta,L-malate) made of approximately 25-30 units was prepared from microbial poly(beta,L-malic acid) by treatment with diazomethane. The thermal characterization of the polymalate methyl ester was carried out and its crystalline structure was preliminary examined. Its ability to crystallize both from solution and from the melt was comparatively evaluated.     

无机膜反应器在丙烷选择氧化反应中的应用

将无机膜反应器用于丙烷部分氧化制丙烯醛的反应中,考察了不同膜操作方式和反应条件的影响。实验结果表明,采用ＰＰＯＲ膜操作方式,即丙烷从渗透侧通入,氧气从反应侧通入,丙烷可获得较大的自由活化空间,避免与气相氧反应,因此提高了部分氧化反应的选择性。采用分别进样的膜反应,丙烯醛产率可比混合进样的固定床反应高出达３倍。     

黄体酮的合成工艺改进

以植物甾醇为原料,分离得豆甾醇(1); 1经沃氏氧化和臭氧化制得中间体孕甾-4-烯-3-酮-22-醛(3); 3经加成缩合并在CuCl催化下经空气氧化合成了黄体酮,总产率69.1%,其结构经¹H NMR和ESI-MS确证。     

Preconcentration and separation of iron, zinc, cadmium and mercury, from waste water using Nile blue a grafted polyurethane foam

The present work describes a novel method for the incorporation of Nile blue A into polyurethane foam matrix. This foam material was found to be very suitable for the extraction of metal ions from aqueous solutions. The characterization of Nile blue A grafted foam and the effect of halide concentration, pH, shaking time, extraction isotherm and capacity have been investigated. This foam material was found to be suitable for the separation and preconcentration of iron (III), zinc (II), cadmium (II) and mercury (II) from waste water. The extraction was accomplished in (15-20) minutes. Iron was separated from acid medium (2-4 M HCl), zinc from (3-5 M HCl), cadmium from (4-6 M HCl) as thiocyanate complexes and mercury was separated from (1-2 M HCl) as chloride.     

Remediation of textile effluent using agricultural residues

The sorption of artificial dye effluent made from two different dyes, Solar orange 7 GLL and Solar Jade Green FFB from Clariant, onto three different agricultural residues—barley husk, sugarcane bagasse, and wheat straw—was studied. Twenty percent of 600-μm particle size of these agricultural residues was used as substrates and studied individually. The percentage of dye removal was observed in concentrations of dye varying from 50 to 200 mg/L. The effect of temperature ranging from 25 to 50°C and pH from 6.0 to 12.0 on the dye removal by the substrates was also studied. The effective adsorption of the substrates was calculated.     

Extraction of gold, palladium and platinum from chloride, bromide and iodide solution with di-n-octyl sulphide (DOS) in cyclohexane

The extraction of gold, palladium and platinum from hydrochloric acid, hydrobromic acid and iodide media by solutions of di-n-octyl sulphide in cyclohexane was examined. From distribution data it was concluded that the monosolvates AuX(3).DOS and disolvates PdX(2).2DOS are extracted. Extraction of platinum was efficient only from iodide solutions; a disolvate PtI(4).2DOS was formed. The possibility of separation of gold and palladium from platinum by extraction from bromide or chloride solutions and simultaneous extraction of palladium and platinum from an iodide medium was demonstrated.     

免疫亲和色谱特异性剔除中药方剂四逆散中的柚皮苷

为了获得剔除柚皮苷(naringin)的中药方剂四逆散样品以供其药理活性探讨时使用,制备了抗柚皮苷抗体的免疫亲和色谱柱,用于特异性地剔除四逆散中的柚皮苷。首先合成了柚皮苷的完全抗原柚皮苷与牛血清白蛋白的结合物naringin-BSA,并用naringin-BSA对新西兰兔进行免疫获得抗血清,再将其纯化后与经CNBr活化的Sepharose 4B凝胶共价偶联制成免疫亲和色谱柱。将四逆散提取物样品溶液上样该色谱柱,洗脱,制得特异性剔除了柚皮苷的四逆散样品。由检测结果可知,naringin-BSA被成功合成。将其用于免疫新西兰兔,获得的抗血清的效价经酶联免疫吸附法（ELISA）测定达到1∶30000,抗体IgG的纯度达94%,交叉反应率低。在IgG与Sepharose 4B合成的IgG-Sepharose免疫亲和色谱柱中,IgG的偶联率为87%。用该免疫亲和色谱柱处理四逆散后,其中所含的柚皮苷几乎完全被剔除。结果证明,利用抗柚皮苷免疫亲和色谱,能特异性地剔除四逆散或其他样品中的柚皮苷成分。     

In vitro pH-dependent drug release from N4-(4-carboxybutyryl)-1-beta-D-arabinofuranosylcytosine and its conjugate with poly-L-lysine or decylenediamine-dextran T70

N4-(4-Carboxybutyryl)-1-beta-D-arabinofuranosylcytosine (glu-ara-C), the conjugate of glu-ara-C and poly-L-lysine (PLL), (PLL-glu-ara-C), and the conjugate of glu-ara-C and decylenediamine-dextran T70 (T70-C10), (T70-C10-glu-ara-C), were prepared. Drug regeneration from glu-ara-C and the conjugates was investigated in buffered solutions of pH 4,5,7,7.4 and 8. The character of the drug release from the conjugates was different from that from glu-ara-C. Namely, the release of 1-beta-D-arabinofuranosylcytosine (ara-C) from glu-ara-C was accelerated under both weakly acidic and weakly basic conditions, while it was accelerated only under weakly basic conditions from the conjugates. Overall, the drug release profiles from the conjugates showed similar patterns. However, under neutral and weakly basic conditions, ara-C was regenerated more rapidly from PLL-glu-ara-C than from T70-C10-glu-ara-C. During the incubation of glu-ara-C and the conjugates under weakly acidic conditions, 1-beta-D-arabinofuranosyluracil (ara-U) was detected and its amount increased with time to similar extents.     

Au@SiO2膜/Ti电极吸附吡啶的表面增强拉曼光谱研究

基于壳层隔绝纳米粒子增强拉曼光谱技术,合成了Au@SiO₂纳米粒子,并对其进行了相关表征. 结果表明,包裹的二氧化硅层连续、致密,Au@SiO₂膜/Ti电极上可获得金属钛电极上吸附吡啶分子的高质量表面增强拉曼光谱（SERS）信号. 通过Pt、Ni电极的测试,证实该信号源于吸附在基底表面的吡啶分子. 此外,Au@SiO₂膜/Ti电极上吸附吡啶分子的现场SERS光谱研究表明,在-0.1 V ~ -0.6 V电位区间,吡啶分子平躺吸附,从-0.6 V起吸附的吡啶分子由平躺逐转变为垂直,而当电位为-1.2 V时,电极表面析氢,吡啶脱附.     

荧光假单胞杆菌胞外蛋白酶的纯化及热稳定性

从原料乳中分离获得一株荧光假单胞菌Rm12, 该菌株分泌的胞外蛋白酶具有很强的耐热性, 其发酵上清液经过硫酸铵沉淀、阴离子层析、疏水层析和分子排阻层析纯化得到SDS-PAGE均一蛋白酶, 经鉴定确认该酶是一种新的金属蛋白酶, 命名为Ht12, 对Ht12的基本特性和热稳定性进行了研究. 结果表明, 此蛋白酶分子量为45000, 含有较高的脯氨酸和二硫键, N末端氨基酸残基序列为MSKVKDKAIVSAAQAS, Mn2+对蛋白酶活力有促进作用. 该蛋白酶具有较高的热稳定性, 于160 ℃加热20 s, 保留活力3.8%.     

用于识别不同细胞蛋白质组的噬菌体抗体芯片

将4个鼠源噬菌体抗体克隆和1个人源噬菌体抗体克隆偶联到羧基终止的硅片表面,制成分析型模型芯片.挑选健康人体淋巴细胞为正常细胞的代表, HeLa细胞为肿瘤细胞的代表,提取细胞的全部蛋白质并用荧光染料Cy3标记,与制成的分析芯片反应,得到了不同的结合图谱.实验结果表明,以噬菌体抗体为分子感受器的分析芯片可用于识别不同细胞的蛋白质组.     

Effect of Aging on the Synthesis of Kaolin-Based Zeolite Y from Ahoko Nigeria Using a Novel Metakaolinization Technique

Zeolite Y was systematically synthesized from Ahoko Nigerian kaolin in a conventional hydrothermal system using novel metakaolinization technique. The effect of aging on the formation of zeolite phase was investigated during the course of the synthesis. A rapidly processed metakaolin at a temperature of 600°C and exposure time of 50 minutes, which is capable of reducing the energy and cost of producing it was used to study the synthesis of zeolite Y. It was found that aging conditions play a prominent role in the preparation of zeolite Y from Ahoko metakaolin. Aging played a significant role by increasing the crystallinity of the final product even though zeolite Y was obtain without aging. The outcome of zeolite Y synthesized from Ahoko kaolin in 9 hours at 100°C was different from most reports on the synthesis of zeolite Y from kaolin where longing time (72 hours) of crystallization are reported.     

A novel pseudo simulated moving bed with solvent gradient for ternary separations

A novel pseudo simulated moving bed was suggested to separate a ternary mixture. A solvent gradient was created to make the solvent strength decreasing from zone II to zone III. Under suitable conditions, the least retained solute A moved forward and the most retained solute C moved backward in zones II and III whereas the medium retained solute B moved forward in zone II but backward in zone III to be trapped in the two zones consequently. Once the columns in zones II and III were saturated with solute B, the solvent dissolving the feed was introduced at the feed port to remove solute A from the raffinate-port and solute C from the extract-port. Finally, solute B was recovered from the extract port by stopping the liquid flow in zone II. This scheme was validated by the successful separation of dihydrocapsaicin from capsaicinoids.     

Industrial-scale preparation of akebia saponin D by a two-step macroporous resin column separation

A simple and efficient procedure for the industrial preparation of akebia saponin D, one of the bioactive compounds commonly found in the well-known Chinese Medicinal herb Dipsaci Radix, was developed. First, HPD-722 was selected from among 10 kinds of macroporous absorption resins. Following this step, the purity of akebia saponin D was increased about 10 times from 6.27% to 59.41%. In order to achieve a higher purity, ADS-7 was chosen from among five kinds of macroporous absorption resins, and the purity of akebia saponin D was increased from 59.41% to 95.05%. The result indicated HPD-722 and ADS-7 were the most suitable resins to purify akebia saponin D from Dipsaci Radix. Under these conditions, large-scale preparation of akebia saponin D was carried out successfully. The preparation method is simple, efficient, and has been demonstrated to be effective for large scale preparations of akebia saponin D from Dipsaci Radix.     

甲基纤维素/二氯乙酸液晶溶液的相转变

本文研究了甲基纤维素/二氯乙酸液晶溶液液晶相与各向同性相之间相互转变的过程。在连续升温过程中,由于液晶相内部有序度的非均一性,升温速率对液晶相织构随温度的变化有较大的影响。在等温相转变过程中,无论是从各向同性态转变为液晶态,还是其逆过程,从液晶态转变为各向同性态,相转变曲线均具有指数方程特征。利用与 Avrami 方程相似的指数方程进行处理,在从各向同性态转变为液晶态时,指数 n 大部分约为1。但液晶相向各向同性相在低于 Tc 时的相转变中,n 均小于1。相转变速率受溶液浓度和温度的影响。在质量分数为0.259的浓度时,液晶相向各向同性相的转变在低于 Tc 时39.5℃进行得最快。     

Stereoselective aldol additions catalyzed by dihydroxyacetone phosphate-dependent aldolases in emulsion systems: preparation and structural characterization of linear and cyclic iminopolyols from aminoaldehydes

The potential of dihydroxyacetone phosphate (DHAP)-dependent aldolases to catalyze stereoselective aldol additions is, in many instances, limited by the solubility of the acceptor aldehyde in aqueous/co-solvent mixtures. Herein, we demonstrate the efficiency of emulsion systems as reaction media for the class I fructose-1,6-bisphosphate aldolase (RAMA) and class II recombinant rhamnulose-1-phosphate aldolase from E. coli (RhuA)-catalyzed aldol addition between DHAP and N-benzyloxycarbonyl (N-Cbz) aminoaldehydes. The use of emulsions improved the RAMA-catalyzed aldol conversions by three to tenfold relative to those in conventional DMF/water mixtures. RhuA was more reactive than RAMA towards the N-Cbz aminoaldehydes regardless of the reaction medium. With (S)- or (R)-Cbz-alaninal, RAMA exhibited preference for the R enantiomer, while RhuA had no enantiomeric discrimination. The linear N-Cbz aminopolyols thus obtained were submitted to catalytic intramolecular reductive amination to afford the corresponding iminocyclitols. This reaction was diastereoselective in all cases examined; the face selectivity was controlled by the stereochemistry of the newly formed hydroxyl group originating from the aldehyde. Characterization of the resulting iminocyclitols allowed the assessment of the diastereoselectivity of the enzymatic aldol reactions with respect to the N-protected aminoaldehyde. RAMA formed single diastereoisomers from N-Cbz-glycinal and from both enantiomers of N-Cbz-alaninal, while 14 % of the epimeric product was observed from N-Cbz-3-aminopropanal. Diastereoselectivity from RhuA was lower than that observed from RAMA. Interestingly, a single diastereoisomer was formed from (S)-Cbz-alaninal, whereas only a 34 % diastereomeric excess was observed from its enantiomer (i.e., (R)-Cbz-alaninal).     

Biological monitoring of arsenic in semiconductor workers

In the manufacture of integrated circuits involving semiconductors, various hazardous materials including arsenic compounds are used. This paper present an evaluation of the biological monitoring of arsenic in the urine, blood and hair of semiconductor workers. Eighty-two blood samples were obtained from research and development workers in a semiconductor factory. Thirty-one samples of urine were obtained from the same group of worker before and after a work period (one shift). Seventy-three hair samples were similarly obtained from the workers. The concentration of arsenic in each sample was determined by arsine (AsH₃) generation flame atomic absorption spectrometry after wet ashing of the sample. The mean concentration of arsenic in hair in these semiconductor workers was significantly higher than that of controls. The mean concentration of arsenic in hair from workers with a longer employment duration was higher than from those with a shorter employment duration. The mean concentration of arsenic in hair from workers engaged in epitaxial growth processes was higher than from workers engaged in other processes. The concentrations of arsenic in hair from semiconductor workers correlated with the duration of their employment. The mean concentration of arsenic in urine before a work a period (shift) was not significantly different from that of controls. The mean concentration of arsenic in urine after a work period was in fact lower than that of controls. The mean concentration of arsenic in blood was not significantly different from that of controls. The determination of arsenic in hair is therefore considered useful for the evaluation of relatively long-term exposure to arsenic in semiconductor workers.