Metastable magnetic configurations of (V, Cr, Mn and Fe) on Ir(0 0 1) surfaces

We present a theoretical study of the electronic and magnetic structure of the 3d-transition metals (M = V, Cr, Mn and Fe) in several overlayer systems. The electronic as well as magnetic structures are investigated for pseudomorphic overlayers (M/Ir(0 0 1)), ordered alloyed overlayers of the type M_0.5Ir_0.5/Ir(0 0 1) and ordered binary surface alloys of V, Cr, Mn and Fe transition metals on Ir(0 0 1) substrates. The calculations are performed with a self-consistent tight-binding method using the unrestricted Hartree-Fock approximation within the Hubbard model. We obtained metastable c(2 × 2) configurations for V, Cr and Mn and a p(1 × 1) configuration for Fe pseudomorphic overlayers. However, ferrimagnetic configuration has been obtained for the ordered surface alloys M_0.5Ir_0.5 and the binary alloyed overlayers on Ir(0 0 1) surfaces.     

Magnetic and Magnetodielectric Properties of Ho<Subscript>0.5</Subscript>Nd<Subscript>0.5</Subscript>Fe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript>

The magnetic and magnetodielectric properties of Ho_0.5Nd_0.5Fe₃(BO₃)₄ ferroborate with the competing Ho–Fe and Nd–Fe exchange couplings have been experimentally and theoretically investigated. Step anomalies in the magnetization curves at the spin-reorientation transition induced by the magnetic field B ║ c have been found. The spontaneous spin-reorientation transition temperature T_SR ≈ 8 K has been refined. The measured magnetic properties and observed features are interpreted using a single theoretical approach based on the molecular field approximation and calculations within the crystal field model of the rare-earth ion. Interpretation of the experimental data includes determination of the crystal field parameters for Ho³⁺ and Nd³⁺ ions in Ho_0.5Nd_0.5Fe₃(BO₃)₄ and parameters of the Ho–Fe and Nd–Fe exchange couplings.     

Features of Electronic Structure of Intermetallic Compounds CeNi<Subscript>4</Subscript>M (M = Fe,Co, Ni,Cu)

The evolution of the electronic structure of CeNi₄M (M = Fe, Co, Ni, Cu) intermetallics depending on the type of nickel substitutional impurity is explored. We have calculated band structures of these compounds and considered options of substituting one atom in nickel 3d sublattice in both types of crystallographic positions: 2c and 3g. The analysis of total energy self-consistent calculations has shown that positions of 2c type are more energetically advantageous for single iron and cobalt impurities, whereas a position of 3g type is better for a copper impurity. The Cu substitutional impurity does not change either the nonmagnetic state of ions or the total density at the Fermi level states. Fe and Co impurities, on the contrary, due to their considerable magnetic moments, induce magnetization of 3d states of nickel and cause significant changes in the electronic state density at the Fermi level.     

Microstructures and magnetic domain configurations of NdFe<Subscript>11</Subscript>Ti and Nd<Subscript>2</Subscript>(Fe,Ti)<Subscript>17</Subscript> aggregates

Nd:11Fe:Ti alloys produced by arc melting and splat quenching have been investigated by scanning electron microscopy, transmission electron microscopy, magnetic force microscopy and magnetic measurements. Both the as-cast and splat-quenched materials crystallized adopting essentially the ThMn₁₂-type structure. However, the RFe₁₁M (where R is a rare-earth element and M is an early 3d element or other non-magnetic element) stoichiometry was not strictly followed and α-Fe(Ti) and Nd₂(Fe,Ti)₁₇ could be detected in the microstructures. Magnetic force microscopy showed that the critical size for single-domain behavior in the splat-quenched aggregates was close to 100 nm. Annealing treatments induced a NdFe₁₁Ti → Nd₂(Fe,Ti)₁₇+α-Fe(Ti) + Fe₂Ti reaction. Transmission electron microscopy investigations showed that this solid-state transformation produced a fine intergrowth of the two ternary rare-earth compounds with a specific crystallographic orientation relation. The lower saturation magnetization of the splat/annealed condition as compared to the splat-quenched condition may reflect the disorderly intergrown Nd₂(Fe,Ti)₁₇ phase in NdFe₁₁Ti. On the other hand the higher coercivity obtained for the splat-quenched condition seems related to the smaller scale of the microstructure due to a possible, albeit weak, pinning effect by the grain boundaries.     

Infrared spectroscopy of europium borates Eu<Emphasis Type="Italic">M</Emphasis><Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript> (<Emphasis Type="Italic">M</Emphasis> = Al,Cr, Fe,Ga) with a huntite mineral type of structure

Huntite-like EuM ₃(BO₃)₄ crystals (M = Al, Cr, Fe, or Ga) are synthesized by means of spontaneous crystallization from a solution in a melt. The infrared spectra of the compounds are measured. The experimental data and the results from ab initio DFT calculations are compared. The comparison shows that the compounds have a primarily noncentrosymmetric rhomboherdal structure with the R32 space group. This indicates these compounds could exhibit magnetoelectric and nonlinear optical properties.     

Specific features of magnetic states of impurity iron ions in the perovskite La<Subscript>0.75</Subscript>Sr<Subscript>0.25</Subscript>Co<Subscript>0.98</Subscript> <Superscript>57</Superscript>Fe<Subscript>0.02</Subscript>O<Subscript>3</Subscript>

Single-phase polycrystalline La_0.75Sr_0.25Co_0.98⁵⁷Fe_0.02O₃ samples have been prepared by solidstate ceramic technology. The samples have the rhombohedral structure (space group \(R\bar 3c\)). The studies of perovskite La_0.75Sr_0.25Co_0.98⁵⁷Fe_0.02O₃ by Mössbauer spectroscopy on impurity ⁵⁷Fe nuclei in the temperature range of 5–293 K have revealed the existence of a superparamagnetic relaxation in the temperature range of 100–210 K. The parameters of hyperfine interactions (hyperfine magnetic fields, line shifts, and quadrupole shifts) and the anisotropy energy have been measured, and the frequencies of magnetic moment relaxation of iron ions have been estimated.     

Magnetic phase separation in the (La<Subscript>0.3</Subscript>Sr<Subscript>0.7</Subscript>)<Subscript>0.5</Subscript>Ca<Subscript>0.5</Subscript>FeO<Subscript>3</Subscript> solid solution with a perovskite structure

The crystal structure and magnetic properties of the (La_0.3Sr_0.7)_0.5Ca_0.5FeO₃ solid solution with a perovskite structure have been investigated. The solid solution has been synthesized according to the high-pressure technique. The unit cell parameters have been refined using the Rietveld full-profile analysis under the assumption of the single-phase crystalline state and the two-phase model corresponding to the parent compositions. It follows from the calculations that the best agreement between the experimental data and the theoretical curve is observed for the two-phase model. The measurement of the magnetic properties also indicates the coexistence of two magnetic phases.     

Specific features of the electrical resistivity of half-metallic ferromagnets Co<Subscript>2</Subscript> <Emphasis Type="Italic">Me</Emphasis>Al (<Emphasis Type="Italic">Me</Emphasis> = Ti,V, Cr,Mn, Fe)

The transport properties of half-metallic ferromagnetic Heusler alloys Co₂MeAl (Me = Ti, V, Cr, Mn, Fe are transition 3d metals) have been measured in the temperature range of 4–900 K. The specific features of the behavior of the resistivity have been considered in the framework of the two-current model of conductivity that takes into account the existence of the energy gap in the electronic spectra of the alloys near the Fermi level of one of electron subbands that differs in the spin direction.     

Polar Fe(IO<Subscript>3</Subscript>)<Subscript>3</Subscript> nanocrystals as local probes for nonlinear microscopy

We have investigated nanocrystals of Fe(IO₃)₃ by polarization-sensitive second harmonic generation (SHG) microscopy. As the nonlinear optical properties of this material were only poorly characterized, we have first determined the relative values of the elements of its second-order susceptibility tensor, by the global fitting of the polarization-resolved SHG response of an ensemble of nanocrystals. This information allows one to optically retrieve the orientation of individual particles in the sample. The high SHG efficiency measured for nanocrystals of Fe(IO₃)₃ and their polar nature could make them very attractive for nonlinear microscopy of biological samples. PACS 42.70.Mp; 78.67.Bf     

Three types of photomagnetic effects in Sp<Subscript>3</Subscript>Cr(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript> crystals

Three different photomagnetic effects caused by ultraviolet light in paramagnetic crystals based on molecules of spiropyrans (Sp) Sp₃Cr(C₂O₄)₃ and SpI have been revealed and separated: (1) in the high-temperature range (30–300 K), the photomagnetic effect in Sp₃Cr(C₂O₄)₃ is determined by the charge transfer between chromium ions and spiropyran molecules; (2) in the low-temperature range (2 K), the photomagnetic effect in Sp₃Cr(C₂O₄)₃ is due to the photoisomerization of spiropyran molecules, the change in the crystal field, and the splitting of the levels of Cr³⁺ ions in zero field; and (3) in the temperature range 2–20 K, the generation of radiation-induced paramagnetic defects contributes to the magnetic moment of the organic sublattice Sp⁺.     

Structure,charge ordering and physical properties of Yb<Subscript>2</Subscript>Fe<Subscript>3</Subscript>O<Subscript>7</Subscript>

The structural and physical properties of the layered Yb₂Fe₃O₇ have been extensively investigated. Transmission electron microscopy (TEM) observations at room temperature reveal the presence of diffuse zigzag-type streaks at 1/3(h h l) running along the c* axis direction, suggesting the presence of a charge ordered state with a shorter coherence length in comparison with that in Lu₂Fe₃O₇. The measurements of magnetization demonstrate that the replacement of Lu³⁺ by the magnetic Yb³⁺ ion in this layered system could result in visible effects on the low-temperature magnetic properties: the ferrimagnetic phase transition temperature decreases and an additional magnetic anomaly possibly attributed to antiferromagnetic coupling between Yb and Fe layers appears at around 50 K. Analysis of the dielectric properties shows that the Yb₂Fe₃O₇ material in general has a large dielectric constant of about 5000 at room temperature, and a broader relaxation time distribution in comparison with ErFe₂O₄.     

Electronic structure of the diamondlike systems BN1−x Mex (Me = Ti, Cr, Mn, Fe, Ni, Cu)

The local coherent potential method is used within the framework of multiple scattering theory to calculate the electron energy structure of the diamondlike systems BN_1−x Me_x (Me is a 3d transition metal) with the ZnS structure. We used the cluster version of the muffin tin approximation to calculate the crystal potential. The framework of a single approximation is used to compare the electronic energy structure of ternary and binary boron-nitride systems. The width of the hybridized band of the ternary systems BN-Me (Me = Cr, Mn, Fe, Cu) is greater than in the binary system by more than 8 eV and is due to the resultant B-Me interaction. Fiz. Tverd. Tela (St. Petersburg) 39, 1338–1341 (August 1997)     

Domain dynamics in (210)-oriented single-crystal (Bi,Y,Lu,Pr)<Subscript>3</Subscript>(Fe,Ga)<Subscript>5</Subscript>O<Subscript>12</Subscript> films

Using high-speed photography, dynamic magnetic structures are studied in Bi-containing (210)-oriented single-crystal films of (Bi,Y,Lu,Pr)₃(Fe,Ga)₅O₁₂ grown through liquid-phase epitaxy from an overcooled solution in the melt on (Gd,Ga)₃(Mg,Zr,Ga)₅O₁₂ substrates. At various temperatures, the ranges of pulsed magnetic fields are determined in which unidirectional anisotropy of domain wall velocity and spatial distortions of moving domain walls are observed.     

The evolution of electronic configuration and magnetic characterization of Fe<Subscript>9</Subscript>Ni<Subscript>1</Subscript>, Fe<Subscript>8</Subscript>Ni<Subscript>2</Subscript> alloy in theoretical calculation

To analyze the origin of the magnetic enhancement of Fe-Ni alloy, the electronicconfigurations and magnetic properties were investigated using density functional theorybased on the first-principle. The supercell (5 × 1 × 1) of Fe,Fe₉Ni₁ and Fe₈Ni₂ were constructed. Thedefect formation energy, band structure, density of states and electron density differencewere calculated. The results showed that Ni doping changed the electronic configuration ofFe atoms, resulting in the enhancement of spin polarization of Fe and the larger Bohrmagnetic moment in Fe-Ni alloys (Fe₉Ni₁). The results showed thatthe charge transfer and the atomic spacing between Fe atoms and the dopant Ni atoms playedan important role in determination of magnetic moment. The value of Fe supercell(5 × 1 × 1), Fe₉Ni₁ and Fe₈Ni₂ were 23.14,23.34 and 22.61μ _B, respectively.     

Effect of severe plastic deformation on the properties of the Pt<Subscript>3</Subscript>Fe antiferromagnet

The effect of atomic disordering on the magnetic, electrical, and optical properties of the Pt_74.1Fe_25.9alloy close in composition to the stoichiometric Pt₃Fe alloy has been studied. It has been shown that, as a result of severe plastic torsional deformation under high pressure, the alloy transforms from the antiferromagnetic state (T _N=164 K) into the ferromagnetic state (T _C≈400 K). In this case, the residual electrical resistivity increases by a factor of more than two and the thermopower changes its sign from positive to negative. The results of the studies of the optical conductivity agree with the previously calculated electronic spectra of the atomically ordered and disordered Pt₃Fe alloys in the range of interband transitions and with the obtained data on the electrical properties in the infrared range.     

Magnetic and EPR studies of the EuFe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript> single crystal

Magnetic and electron paramagnetic resonance (EPR) properties of EuFe₃(BO₃)₄ single crystals have been studied over the temperature range of 300–4.2 K and in a magnetic field up to 5 T. The temperature, field and orientation dependences of susceptibility, magnetization and EPR spectra are presented. An antiferromagnetic ordering of the Fe subsystem occurs at about 37 K. The easy direction of magnetization perpendicular to the c axis is determined by magnetic measurements. Below 10 K, we observe an increase of susceptibility connected with the polarization of the Eu sublattice by an effective exchange field of the ordered Fe magnetic subsystem. In a magnetic field perpendicular to the c axis, we have observed an increase of magnetization at T < 10 K in the applied magnetic field, which can be attributed to the appearance of the magnetic moment induced by the magnetic field applied in the basal plane. According to EPR measurements, the distance between the maximum and minimum of derivative of absorption line of the Lorentz type is equal to 319 Gs. The anisotropy of g-factor and linewidth is due to the influence of crystalline field of trigonal symmetry. The peculiarities of temperature dependence of both intensity and linewidth are caused by the influence of excited states of europium ion (Eu³⁺). It is supposed that the difference between the g-factors from EPR and the magnetic measurements is caused by exchange interaction between rare earth and Fe subsystems via anomalous Zeeman effect.     

Density functional study of Pu<Subscript>2</Subscript>C<Subscript>3</Subscript>

The structural, magnetic, electronic, vibrational, thermodynamic and elastic properties of plutonium sesquicarbide (Pu₂C₃) are investigated based on density functional theory. The use of the Hubbard term to describe the 5f electrons of plutonium is discussed according the lattice parameters and magnetism. The calculated lattice constants, magnetism and density of states agree well with the experimental data or other theoretical calculations. The Pu-C bonds of Pu₂C₃ have a mixture of covalent character and ionic character, while covalent character is stronger than ionic character. The phonon frequencies and the assignment of infrared-active, Raman-active and silent modes at Γ point are obtained. Furthermore, the enthalpy difference H-H₂₉₈, entropy S, heat capacity and linear thermal expansion coefficient α of Pu₂C₃ have been calculated and compared with the available data. Lastly, the calculated elastic properties predict that Pu₂C₃ is ductile metal. In addition, the effect of spin-orbit coupling on the structural, magnetic, and electronic properties of Pu₂C₃ has been discussed. We hope that our results can provide a useful reference for further theoretical and experimental research on Pu₂C₃.     

<Superscript>57</Superscript>Fe NMR study of multiferroic BiFeO<Subscript>3</Subscript>

The effects of the ⁵⁷Fe isotope content and high-frequency magnetic field amplitude h ₁ on the shape of the NMR spectrum of multiferroic BiFeO₃ at T = 4.2 K are studied by pulsed nuclear magnetic resonance. The NMR spectrum shape and transverse relaxation time T ₂ are found to depend strongly on the ⁵⁷Fe isotope content and h ₁ in multiferroic BiFeO₃ in the presence of a spatial spin-modulated structure of a cycloid type. In a sample with a high ⁵⁷Fe isotope content, the Suhl-Nakamura interaction contributes substantially to T ₂. When these dynamic effects are taken into account for analysis of the NMR spectrum shape, an undisturbed (without an anharmonicity effect) spatial spin-modulated structure of a cycloid type is shown to exist in BiFeO₃.     

Specific features of the electronic structure of the CeCu<Subscript>6</Subscript>, CePd<Subscript>3</Subscript>, CeSi<Subscript>2</Subscript>, and CeF<Subscript>3</Subscript> systems

The electronic structure of cerium systems, the hybridization of 4 f and outer-shell electrons, and the influence of the position of the localized 4 f level with respect to the Fermi level E _F in the conduction band have been investigated. The CeCu₆, CePd₃, CeSi₂, and CeF₃ systems have been studied using X-ray photoelectron spectroscopy. The densities of states have been calculated by the tight-binding linearized muffin-tin orbital method within the atomic sphere approximation, which takes into account the covalent character of bonds and the nonspherical distribution of the electron density. The results obtained from the calculations of the total density of states are in good agreement with the valence band X-ray photoelectron data for the systems under investigation. It has been shown that the differences in the properties of the cerium systems are determined by the specific features of their electronic structure. A strong interatomic interaction is characteristic of heavy-fermion systems.     

Threshold effect of microwave power on ferromagnetic resonance in K<Subscript>0.4</Subscript>[Cr(CN)<Subscript>6</Subscript>][Mn(S)-pn](S)-pnH<Subscript>0.6</Subscript> single crystals

A stepwise change in the ferromagnetic resonance spectrum in a K_0.4[Cr(CN)₆][Mn(S)-pn](S)-pnH_0.6 chiral magnet has been observed in a critical microwave magnetic field of 1.8 Oe. The threshold changes in the ferromagnetic resonance spectra are caused by Suhl instability leading to the generation of defects of the magnetic structure, chiral spin solitons. The threshold effect is not observed in the same microwave range in similar chiral crystals [Cr(CN)₆][Mn(S)-pnH(H₂O)](H₂O) with a stronger Heisenberg exchange interaction.