共查询到20条相似文献,搜索用时 109 毫秒
1.
ECPSSR理论是解释离子-原子碰撞内壳层电离最成功的理论之一.我们用VISUAL FORTRAN编写了ECPSSR理论计算程序,修正了ISICS程序中的错误,本程序可以对各种入射离子与靶原子的组合进行计算,给出K,L,M的壳层及次壳层电离截面以及相应的X射线产生截面,并根据需要选择是否对入射离子运动进行相对论修正.采用所编写的程序计算了一些碰撞体系的电离截面和X射线产生截面,并与其他程序的计算结果和实验数据分别进行了比较. 相似文献
2.
3.
4.
用SYNCH和MAD程序计算了一些含有坐标旋转的束流系统.由于坐标旋转,粒子的垂直和水平方向的运动发生耦合. 对计算结果进行的分析表明,对有横向耦合的束流系统,SYNCH程序给出的四个色散函数(ηx,ηx',ηy及ηy')是错误的.这两个程序给出的Twiss参数(βx,αx,βy和αy)也有较大的分歧.本文通过对一个简单的有耦合系统的计算结果的分析,说明这两个程序计算结果有错误和分歧.使用这些程序计算有耦合的束流系统时,应格外小心,以免得出错误的结果. 相似文献
5.
6.
7.
三阶矢量有限元方法精确计算轴对称谐振腔高阶模 总被引:1,自引:0,他引:1
为了进一步提高数值求解谐振腔高阶模的精度,本文提出了三阶矢量有限元方法,并针对二阶矢量有限元轴对称谐振腔高阶模计算程序Cafe对曲线边界的计算能力较差和计算速度较慢的缺点做了改进. 在这些改进的基础上编制了三阶矢量有限元轴对称谐振腔高阶模计算程序meshmatrix3,得到了很好的结果. 相似文献
8.
利用三个运动常数发展了导心轨道程序GCORBIT. 该程序在计算轴对称tokamak中带电粒子导心轨道的同时,也考虑了纵场纹波和螺距角散射的效应. GCORBIT可以用来计算轴对称tokamak中的导心轨道,计算速度空间的损失区,计算快离子的损失份额. 与已有的工作相比,GCORBIT计算出的速度空间损失区包括了多种效应:偏滤器位形中的非闭合轨道、由于导心轨道与第一壁相交引起的首次轨道损失、纵场纹波局部磁阱俘获、纹波随机扩散以及速度空间不连续约束区导致的螺距角散射效应增强. GCORBIT程序已被用于分析“先进超导托卡马克实验装置”(experimental advanced superconducting tokamak,EAST) tokamak中快离子的约束. 并讨论其中的某些数值计算结果.
关键词:
导心轨道程序
快离子约束
tokamak 相似文献
9.
10.
11.
12.
采用法国的MAFIA程序计算电场.编制了TRAJ程序,用逐点跟踪计算电子轨迹,得到了束流包络.观察了在高压电场中栅压对束流光学传输的影响,并获得了在不同能量范围内的栅压聚焦作用,为栅压调节提供了理论依据,也为将来对其它规格的电子帘加速器的物理设计积累了十分宝贵的经验. 相似文献
13.
利用SLAC-226程序对一种工业用大功率电子加速器(450kW)的电子枪光学系统性能进行了研究。计算程序以带电粒子的洛伦兹力运动方程的相对论形式为基础,在充分考虑了空间电荷效应和电子自身产生磁场的情况下编写而成。在该程序中,网格的划分采用正方形网格;解泊松方程采用半迭代切比雪夫法;解轨迹方程采用四阶龙格 库塔法。经过对轴上电位的优化计算,得到了轴上电场的分布,电子轨迹以及阳极孔处的径迹斜率等结果,并且对外加电场与空间电荷场对束流的聚焦作用作了比较分析。计算发现,电子初始角和初始能量(对束流的)聚焦性能影响很小,二极管间距 d=58.5mm时对束流聚焦最有利。 相似文献
14.
对一个新型、紧凑、高效的电子直线加速器的加速管的设计,进行了等阻抗与等梯度两种结构的比较研究.对于使用一个5MW速调管的能量和相位经过选择的用毕束流注入到两种加速管的情况应用Parmela程序进行了模拟计算.说明宜于加工和调试的等阻抗加速管更为适宜.最后,简单地讨论了如用更高功率(如30MW?,相应加速能量约为30MeV)的速调管用毕束流作为这种新型加速器的注入束时,等阻抗加速结构除了在设计、加工、调试中的简单易行外,同时模拟结果表明整个加速管无需外加横向聚焦磁场. 相似文献
15.
电子加速器能量脉动的大小是影响电子加速器稳定可靠运行的重要因素之一。利用R-C串联方法测量能量脉动的结果说明电子加速器的能量脉动测量存在磁场干扰。采用有限元法数值计算了电子加速器中高压发生器结构改动前后的磁场干扰值的大小,通过对高压发生器结构的改,最后测量到较真实的能量脉动系数。说明用这种高压发生器的三相电子加速器所产生的能量脉动系数可以满足电子加速器正常工作的要求,可以确定能量脉动系数太大不是加速器在强流工作时稳定性变差的主要原因。 he Ripple coefficient is one of the important factor for the stability of industrial high voltage electron accelerator. Accelerator can’t work well when the ripple coefficient is high. The increment of the measured ripple values becomes very large with the increase of the accelerator load current. From the simulation with finite element method of high voltage generator,we found that the leakage magnetic field was the most important reason for the results of ripple measurement. The ripple was measured after changing the frame of the high voltage generator to suppress the leakage magnetic field. It can be concluded that the actual value is acceptable to the accelerator and the measured high ripple coefficient is not the reason of malfunction of this high power electron accelerator. 相似文献
16.
17.
18.
Phelps D. A. Markins D. Fargo V. Kolb A. C. 《IEEE transactions on plasma science. IEEE Nuclear and Plasma Sciences Society》1976,4(3):190-193
Low impedance relativistic electron accelerators currently produce nominal 50 ns pulses that are capable of power levels near 1 Terawatt at impedances near 1 Ohm. The time-dependent diode impedance characteristic plays a major role In efficiently coupling the pulse line power to an electron beam. In an effort to establish the desired accelerator impedance match early in the pulse, experimentalists have investigated cold cathode vacuum breakdown and subsequent space charge limited emission during the ~ 100 kV machine prepulse. This machine prepulse is due to capacitive coupling across the accelerator switches, and consequently cannot be independently studied and optimized. In this paper, a technique for externally introducing a typically 100 kV, low power conditioning pulse prior to the main pulse of a low impedance relativistic electron diode is described, along with techniques for reducing the machine prepulse to less than 5 kV. For various cathode geometries, the breakdown field, closure velocity, and time-dependent impedance established by this external prepulse is measured and compared with an empirical model of space charge limited emission from a hydro-dynamically expanding plasma. 3 Experimental evidence is presented that the high current accelerator impedance is effectively controlled by the relative time delay between the start of the prepulse and the main pulse. 相似文献
19.
介绍了清华大学加速器实验室近年来关于汤姆逊散射超短X射线源的研究工作;研究了在任意散射角度下电子束参数和激光束参数对散射光子参数的影响,给出了散射光子的参数如光子产额、脉冲长度、时间抖动等与电子束参数、激光束参数和散射角度的关系;利用实验室已有的16 MeV反波行波加速器与中国工程物理研究院激光聚变研究中心提供的ns调Q激光搭建了汤姆逊散射初步实验平台并开展了实验研究;加工了1.6-cell光阴极微波电子枪,搭建了高功率实验平台,对产生的电子束参数进行了初步测量;对汤姆逊散射超短X射线源进行了设计并开展了相关的平台建设工作,对产生的X射线脉冲参数进行了模拟。 相似文献
20.
l.IntroductionPscudosparkdischargeisakindofgasdischargewhichoccursinaspecialgcometry,theso-calledPseudosparkChambcr(PSC),athighvoltages(lokV~rlMV)andlowpressures(lpa-loopa).ThePSCconsistsofahollo`vcathodeandaplateanodebothwithacommoncentraldischargechannel.Wllenaninsulatorisinsertedbetweenthehollowcathodeandtheanode,thisdeviceiscalledthesinglcgapPSCi``ithstacksofalternativeinsulatorandinter-mediateeleqtrodebeingplaced,itiscallcdthemultiplegapPSC.Thepseudosparkelectronbeamshavebeengenera… 相似文献