Preparation and chiral recognition ability of cellulose 3,5-dimethylphenylcarbamate immobilized on silica gel through radical polymerization

Polysaccharide-immobilized chiral stationary phases (CSPs) were prepared by the polymerization of cellulose 3,5-dimethylphenylcarbamate, having a polymerizable vinyl group, such as 4-vinylphenylcarbamate or 2-methacryloyloxyethylcarbamate, at the 6-position, with a vinyl monomer, such as styrene, isoprene, t-butyl acrylate, or t-butyl methacrylate, on silica gel under various conditions. Their chiral recognition abilities were then evaluated with high-performance liquid chromatography. The immobilized cellulose 3,5-dimethylphenylcarbamate remained on the silica gel even if washed with tetrahydrofuran, which could dissolve the cellulose derivative. The chiral recognition abilities of the immobilized CSPs were similar to those of the coated CSPs when the vinyl monomer content was low. The chiral recognition abilities of the obtained immobilized CSPs slightly depended on the vinyl monomers. The immobilization of the cellulose derivatives was more efficiently attained on the silica gel modified with a vinyl compound. The cellulose derivatives, randomly having a vinyl group at the 2-, 3-, or 6-position of the glucose unit, were prepared by a one-pot reaction. The immobilization efficiency of these derivatives was slightly lower than that of the derivative with the vinyl group at the 6-position. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3703–3712, 2003     

Stereocontrol in radical polymerization

The stereospecific radical polymerization of vinyl esters, methacrylates, and alpha-substituted acrylates was studied. Fluoroalcohols, as a solvent, have remarkable effects on the stereoregularity of the radical polymerizations of vinyl acetate, vinyl pivalate, and vinyl benzoate, affording polymers rich in syndiotacticity, heterotacticity, and isotacticity, respectively. This method was successfully applied to the polymerization of methacrylates to give syndiotactic polymers. The steric repulsion between the entering monomer and the chain-end monomeric unit bound by the solvent through hydrogen bonding is important for the stereochemical control in these systems. Lewis acid catalysts, such as lanthanide trifluoromethanesulfonates and zinc salts, were also effective for the stereocontrol during the radical polymerization of methyl methacrylate, to reduce the syndiotacticity and alpha-(alkoxymethyl)acrylates to synthesize isotactic and syndiotactic polymers. Radical polymerization of the methacrylates bearing a bulky ester group, such as the triphenylmethyl methacrylate derivatives, gave highly isotactic polymers, as in the case of anionic polymerization. In addition, the control of one-handed helical conformation was attained in the radical polymerization of 1-phenyldibenzosuberyl methacrylate using chiral neomenthanethiol or cobalt(II) complexes as an additive.     

硅胶负载手性氨基醇聚合物的合成及其应用

以L-亮氨酸(L-Leu)为手性源,经酯化、格氏化、酰胺化等步骤制备手性单体(L-NALAA),以该单体为手性识别基团,在引发剂偶氮二异丁腈和交联剂乙二醇二甲基丙烯酸酯(EDMA)的作用下,与烯化功能硅胶发生自由基共聚反应,制备了新型键合硅胶手性固定相,其结构经FT-IR、TGA、EA表征。以4种对映异构体为模型药物对手性材料手性固定相的手性拆分性能进行研究,结果表明,手性材料手性固定相对奥美拉唑和兰索拉唑的拆分效果较好。     

One-pot synthesis of polysaccharide 3,5-dimethylphenylcarbamates having a random vinyl group for immobilization on silica gel as chiral stationary phases

Different kinds of vinyl groups were randomly introduced onto the glucose units of cellulose 3,5-dimethylphenylcarbamates by a one-pot method using the bifunctional reagents dec-1-ene-10-isocyanate, 2-isocyanatoethyl methacrylate, and methacryloyl chloride. The chiral recognition properties of the prepared derivatives were then evaluated by coating and immobilizing them on silica gel as HPLC packing material. Immobilization was carried out by radical copolymerization with a vinyl comonomer, 1,5-hexadiene, in toluene at 80 degrees C. The effects of the structures and content of the vinyl groups on the immobilization and on enantioseparations were investigated. This one-pot method was also extended to the synthesis of amylose 3,5-dimethylphenylcarbamates having a random vinyl group. Comparisons of the chiral resolution powers of our laboratory-made packing materials and the newly commercialized Chiralpak IA with immobilized amylose 3,5-dimethylphenylcarbamate and Chiralpak IB with immobilized cellulose 3,5-dimethylphenylcarbamate are discussed.     

Free‐radical polymerization of dioxolane and dioxane derivatives: Effect of fluorine substituents on the ring opening polymerization

Partially fluorinated and perfluorinated dioxolane and dioxane derivatives have been prepared to investigate the effect of fluorine substituents on their free‐radical polymerization products. The partially fluorinated monomer 2‐difluoromethylene‐1,3‐dioxolane (I) was readily polymerized with free‐radical initiators azobisisobutyronitrile or tri(n‐butyl)borane–air and yielded a vinyl addition product. However, the hydrocarbon analogue, 2‐methylene‐1,3‐dioxolane (II), produced as much as 50% ring opening product at 60 °C by free‐radical polymerization. 2‐Difluoromethylene‐4‐methyl‐1,3‐dioxolane (III) was synthesized and its free‐radical polymerization yielded ring opening products: 28% at 60 °C, decreasing to 7 and 4% at 0 °C and −78 °C, respectively. All the fluorine‐substituted, perfluoro‐2‐methylene‐4‐methyl‐1,3‐dioxolane (IV) produced only a vinyl addition product with perfluorobenzoylperoxide as an initiator. The six‐membered ring monomer, 2‐methylene‐1,3‐dioxane (V), caused more than 50% ring opening during free‐radical polymerization. However, the partially fluorinated analogue, 2‐difluoromethylene‐1,3‐dioxane (VI), produced only 22% ring opening product with free‐radical polymerization and the perfluorinated compound, perfluoro‐2‐methylene‐1,3‐dioxane (VII), yielded only the vinyl addition polymer. The ring opening reaction and the vinyl addition steps during the free‐radical polymerization of these monomers are competitive reactions. We discuss the reaction mechanism of the ring opening and vinyl addition polymerizations of these partially fluorinated and perfluorinated dioxolane and dioxane derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5180–5188, 2004     

旋光性聚{(+)-甲基丙烯酸-2,5-二[4′-((S)-2-甲基丁氧基)苯基]苄酯}的合成与表征

设计、合成了一个带有横挂三联苯侧基的手性乙烯基单体——(+)-甲基丙烯酸-2,5-二[4′-((S)-2-甲基丁氧基)苯基]苄酯,进行了普通自由基和原子转移自由基聚合反应.所得聚合物具有比单体低30°左右的比旋光度,且在侧基的紫外吸收处呈现明显不同于单体的Cotton效应,说明其主链可能形成了具有相反旋光方向的螺旋构象.在所研究范围内,聚合条件对聚合物的旋光度没有明显的影响.在分子量较小时,聚合物的比旋光度随着分子量的增加而降低,说明主链螺旋构象的贡献在增大,而当分子量达到一定值后,聚合物的比旋光度不再随分子量的增加而显著变化.     

手性乙烯基二联苯单体的合成与螺旋选择性聚合反应

设计、合成了一系列含有手性烷氧基末端的乙烯基二联苯单体,进行了普通自由基、原子转移自由基以及负离子聚合反应.所有单体中,只有手性烷氧基苯基位于乙烯基邻位的聚合物的比旋光度与其单体相比有比较大的区别,且在对应于其侧基的紫外吸收处呈现明显不同于单体的Cotton效应,说明可能形成了某一方向占优的螺旋构象.在所研究范围内,聚合条件和聚合物分子量对聚合物的旋光度没有明显的影响.比较负离子聚合和自由基聚合所获得聚合物的比旋光度发现,负离子聚合有利于增加聚合物螺旋链构象的完整性.切除能形成螺旋链的聚合物侧基上的手性烷氧基,所得到的聚合物虽然不含手性原子但依然表现出光学活性,说明其具有一定的手性记忆效应.     

1-O-vinyl glycosides via Tebbe olefination, their use as chiral auxiliaries and monomers

A series of anomerically pure 1-O-formyl glycosides 1 was prepared and converted into the corresponding 1-O-vinyl glycosides 2 by Tebbe olefination. The unsubstituted vinyl glycosides were obtained as anomerically pure compounds in good yields, and the method of preparation was compatible with the presence of a variety of functional groups. Remarkably, the anomeric formate group was regioselectively converted into the corresponding olefin in the presence of acetate and benzoate protecting groups. With the perspective to use the 1-O-vinyl glycosides as monomers for the preparation of glycosylated poly(vinyl alcohol) derivatives with controlled tacticity, their scope as chiral auxiliaries for a stereodifferentiation in addition reactions to the olefin function was investigated by using the [2+2] cycloaddition to dichloroketene as a model reaction. In particular, vinyl 2,3,4,6-tetra-O-benzoyl-alpha-d-mannopyranoside (2i) exhibited excellent diastereoselectivity. Finally, the 1-O-vinyl glycosides were successfully subjected to radical homopolymerization in bulk or used as electron-rich comonomers in radical copolymerizations with maleic anhydride, yielding alternating, glycosylated poly(vinyl alcohol-alt-maleic anhydride).     

聚甲基丙烯酸葡萄糖酯及聚甲基丙烯酸纤维二糖酯高效液相色谱手性固定相的性能测评

首先合成了甲基丙烯酸葡萄糖酯和甲基丙烯酸纤维二糖酯,然后通过甲基丙烯酸-3-(三甲氧基硅基)丙酯分别聚合在硅胶上,并将其作为高效液相色谱手性固定相。分别以正己烷-异丙醇(体积比为90:10)、正己烷-异丙醇-三乙胺(体积比为90:10:0.2)和正己烷-异丙醇-三氟乙酸(体积比为90:10:0.2)溶液作为流动相,对15种包含醇类、胺类、酰胺类和酮类的外消旋体化合物进行手性拆分。拆分结果表明,葡萄糖和纤维二糖聚合物固定相对大多数醇类和胺类以及部分酰胺类和酮类外消旋体化合物有较好的手性识别能力,并且二者的手性识别能力还具有一定的互补性。该研究表明,单糖和二糖聚合物固定相可成为一类新型的高效液相色谱手性固定相。     

单体结构和聚合条件对大体积乙烯基聚合物旋光性质的影响

合成了3种手性大体积烯类单体——(+)-4,4″-二[(S)-2-甲基丁氧基]-2′-乙烯基对三联苯(p-BMVT)、(+)-3,3″-二[(S)-2-甲基丁氧基]-2′-乙烯基对三联苯(m-BMVT)和(+)-2,2″-二[(S)-2-甲基丁氧基]-2′-乙烯基对三联苯(o-BMVT),其中后两个为新化合物.系统研究了单体结构对其聚合反应活性以及单体结构和反应条件对所得聚合物旋光性质的影响.p-和m-BMVT在合适的条件下可以顺利地进行自由基聚合,形成某一旋向占优的手性二级结构;手性取代基在单体分子上移动一个共价键的距离导致聚合物的旋光方向相反.单体o-BMVT的合成产率低且不能进行自由基聚合.提高芳烃类或者降低非芳烃类聚合溶剂的极性、升高反应温度、减少单体浓度有利于得到旋光度大的聚合物.     

衰减链转移(DT)聚合醋酸乙烯酯的动力学

在醋酸乙烯酯的普通自由基聚合体系中加入少量碘（质量分数为0.57%～0.86%）,用偶氮二异丁腈作引发剂合成聚醋酸乙烯酯,对其聚合反应的动力学及反应机理进行了研究。 考察了碘质量分数对聚合反应速率、聚合物分子量及分子量分布的影响,发现随着碘浓度的增加,聚合物分子量及分子量分布得到更好的控制;对聚合过程进行了核磁跟踪,考察了聚合过程中几种化合物的变化情况,特别是初级自由基与碘生成的加合物A-I（A来自引发剂分裂后产生的自由基）及单体加合物A-Mn-I（M代表单体单元）的变化情况;对聚合物结构作了详细的1H NMR分析,结果表明,聚合过程中分子量随时间延长而逐渐增大,分子量分布随单体转化率增加而变窄,聚合终期,单体转化率达到80%左右时,所得聚合物分子量分布窄（Mw/Mn≤1.41）,且含有碘端基。该方法的自由基聚合具有活性/可控的性质。     

键合型多糖类手性固定相的研究进展

多糖类衍生物手性固定相因其强大的手性分离能力,在液相色谱直接拆分对映体方面应用广泛。涂敷型手性固定相因多糖衍生物与基质间无化学键,因此溶剂耐受性差,流动相的选择十分有限。而键合型多糖类手性固定相克服了涂敷型手性固定相的缺点,扩大了流动相的选择范围,提高了手性固定相的稳定性,成为近年来手性分离领域的研究热点。该文对这类固定相的5种制备方法:双官能团试剂法、端基还原法、共聚法、光化学法以及分子间缩聚法进行了介绍,对各种制备方法的优缺点进行了比较,并对其发展方向进行了展望。     

Synthesis of a novel restricted access chiral stationary phase based on atom transfer radical polymerization and click chemistry for the analysis of chiral drugs in biological matrices

A novel chiral restricted access material was synthesized via a combination of atom transfer radical polymerization (ATRP) and click chemistry. Poly(2-methyl-3-butyn-2-ol methacrylate) (pMBMA) was grafted onto porous silica gel by a surface-initiated ATRP in order to synthesize an inner layer for β-cyclodextrin (β-CD) immobilization. The azide-modified β-CD was bound to pMBMA by click chemistry. The results demonstrate that click chemistry provides an effective route for the immobilization of β-CD for chiral discrimination. A second ATRP reaction was then used to graft external poly(glycidyl methacrylate) (pGMA) layer onto the silica gel. The external hydrophilic layer was subsequently created by hydrolysis of the epoxy groups of the pGMA. This bi-layer grafted material exhibited both enantioseparation and protein exclusion. It can be used for the efficient separation of chiral compounds in biological samples with direct injection into an HPLC system.     

Polymerization of water soluble cationic vinyl monomers

This paper summarizes investigations on the radical polymerization of cationic vinyl monomers with respect to the peculiarities of the reaction in aqueous solution, the synthesis of model polymers and polyelectrolytes with regular structure as well as to a new process of stabilized precipitation polymerization. The rate of polymerization depends on the ionic strength of the solution. Random copolymers of diallyldimethylammonium chloride and acrylamide with variable charge density but equal molecular weight were synthesized by a feeding technique. Block copolymers consisting of charged and uncharged monomelic units with different hydrophilicity are available using macroazoinitiators. The novel polymers are powerful stabilizers in the precipitation polymerization of water soluble cationic vinyl monomers in aqueous salt solution leading to a dispersion of fine polymer particles. Polyampholytes with alternating positively and negatively charged monomelic units in the backbone were obtained by cyclocopolymerization of diallylanmine compounds and derivatives of maleic acid.     

聚合反应制备键合型纤维素-三(4-甲基苯基甲酸酯)衍生物类手性固定相

合成了带有甲基丙烯酰基的纤维素-三(4-甲基苯基甲酸酯)衍生物(CTMB),并通过聚合反应将其键合在具有双键的硅胶表面,得到手性固定相(CSP)。用所得到的CSP对9种对映体化合物(丁苯酞、酮基布洛芬、反-2,3-二苯环氧乙烷、安息香、安息香类似物、托葛尔碱、华法令、4,4′-二甲氧基-5,6,5′,6′-二次甲二氧基-2,2′-羰甲基甲酯联苯、4,4′-二甲氧基-5,6,5′,6′-二次甲二氧基-2-羰甲基甲酯-2′-羰甲基乙酯联苯)进行了拆分。考察了CSP制备过程中甲基丙烯酰氯的用量、键合方式以及硅胶     

Polymerization of cyclic ethers in the presence of maleic anhydride. Part II. Investigation of the polymerization mechanism

In order to elucidate the reaction mechanism of both the radiation-induced and benzoyl peroxide-catalyzed polymerizations of cyclic ethers in the presence of maleic anhydride, the development of color during reaction and copolymerization of oxetane derivatives were investigated. Upon addition of a small amount of the γ-ray or ultraviolet-irradiated equimolar solution of a cyclic ether and maleic anhydride to isobutyl vinyl ether, a rapid polymerization took place, and the resulting polymer was confirmed to be a homopolymer of isobutyl vinyl ether. A heated solution of dioxane, maleic anhydride, and a small amount of benzoyl peroxide can initiate the polymerization of isobutyl vinyl ether in the same manner. The electrical conductivity of a 1:1 mixture of maleic anhydride and dioxane is increased by about a factor of ten after ultraviolet irradiation. These results indicate that some cationic species are actually formed in the system by irradiation or the decomposition of added benzoyl peroxide. The mechanism of formation of the cationic species responsible for the initiation may be explained as follows. A free radical of an ether is formed by abstraction of a hydrogen atom attached to the carbon adjacent to oxygen atom, followed by a one-electron transfer from the resulting radical to maleic anhydride, an electron acceptor, to yield the cationic species of the ether and the anion-radical of maleic anhydride, respectively. The resulting cationic species as well as the counteranion-radical are resonance-stabilized. Therefore, the present polymerization may be designated a radical-induced cationic polymerization.     

Fabrication and evaluation of chiral monolithic column modified by β-cyclodextrin derivatives

Based on combination of chiral recognition ability of β-cyclodextrin (β-CD) derivatives and flexibility of monolithic material, a series of chiral stationary phases (CSPs) were prepared by the immobilization of β-CD and three of its derivatives to the epoxy-activated poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith under mild condition. Immobilization condition for the connection reaction by different functional groups and bonding ways was studied to obtain good enantiomer selectivity. Prepared CSPs were evaluated by separating racemic mixtures of eight amino acids and two chiral drugs with capillary electrochromatography (CEC).     

Polymerization photoinitiated by carbonyl compounds. VI. Mechanism of benzil photoinitiation

The mechanism of the photoinitiation of the vinyl polymerization sensitized by benzil and 4,4′-dimethoxybenzil was studied. The monomers considered were methacrylic acid esters and styrene derivatives. All these monomers are efficient quenchers of the excited triplet benzil. However, the initiation efficiency of the benzil is important only when styrene derivatives are employed as monomers. The main polymerization process follows a simple free radical mechanism. The initiation step is a consequence of the interaction (triplet benzil–monomer double bond) through a charge transfer complex.     

Emulsion polymerization of vinyl acetate. II

The emulsion polymerization of vinyl acetate was investigated at low ionic strengths and has quite unusual kinetics. The rate of polymerization is dependent on the initiator concentration to the first power and independent of soap concentration. In seeded polymerizations, the rate of polymerization depends on initiator to the 0.8 power, particle concentration to the 0.2 power, and monomer volume to 0.35 power. In all cases the rate of polymerization is almost independent of monomer concentration in the particles until 85–90% conversion. These results were rationalized by the following mechanism: (a) polymerization initiates in the aqueous phase because of the solubility of the monomer and is stabilized there by adsorption of ionic soap on the growing polymer molecule; (b) the growing polymer is swept up by a particle at a degree of polymerization (under our conditions) of about 50–200. Growth continues in the particle. This sweep-up is activation-controlled as both particle and polymer are charged. (c) Chain transfer to the acetyl group of monomer gives a new small radical which cyclizes to the water-soluble butyrolactonyl radical, and reinitiates polymerization in the aqueous phase; (d) the main termination step is reaction of an uncharged butyrolactonyl radical with a growing aqueous polymer radical. A secondary reaction at low ionic strength is sweep-up of an aqueous radical by a particle containing a radical. At high ionic strength, this is the major termination step. The unusual kinetic steps are justified by data from the literature. They are combined with the usual mechanisms operating for vinyl acetate polymerization and kinetic equations are derived and integrated. The integral equations were compared with the experimental data and shown to match it almost completely over the whole range of experimental variables.     

固定化脯氨酸及其衍生物用于催化不对称有机合成

脯氨酸及其衍生物作为有机手性催化剂,在不对称有机合成中得到广泛应用。该类催化剂具有结构简单、来源丰富和选择性高等优点,但仍存在催化剂用量大、难以回收以及无法重复利用等不足。近年来,随着固定化技术的发展,固定化脯氨酸及其衍生物受到广泛关注。固定化脯氨酸及其衍生物催化剂可以简化不对称催化中产物的分离过程,实现催化剂的便利回收与循环使用。本文综述了固定化脯氨酸及其衍生物的制备及在催化不对称有机合成(如Aldol反应、Michael加成反应、Mannich反应等)中的研究进展。