Polymeric organosilicon systems 14. Synthesis and some properties of alternating polymers composed of a dithienylene group and a mono-, di- or tri-silanylene unit

Poly[5, 5′ - (dimethylsilylene) - 2, 2′ - dithienylene] (4a), poly[5, 5′ -(methylphenylsilylene)-2, 2′ -dithienylene] (4b), poly[5, 5′ -(1, 1, 2, 2-tetramethyldisilanylene)-2, 2′ -dithienylene] (4c), poly[5, 5′-(1, 2-dimethyl-1, 2-diphenyldisilanylene)-2, 2′ -dithienylene] (4d), poly[5, 5′-(1, 2, 2, 2-tetramethyldisilanylene)-2, 2′-dithienylene] (4e), and poly[5, 5′-(1, 1, 2, 2, 3, 3 - hexamethyltrisilanylene) - 2, 2′ -dithienylene] were synthesized by dehalogenative coupling of the respective bis(2-bromothienyl)- substituted mono, di- and tri-silanes with magnesium in the presence of a catalytic amount of a nickel(II) complex in 16–99% yields. The polymers thus obtained are light-yellow solids and soluble in common organic solvents. Molecular weights, M_w, of the polymers were measured and found to be 7800–35 000 by gel-permeation chromatography relative to polystyrene standards. The photochemical properties of the polymers (4a–4d) having silylene and disilanylene units were investigated. Only poly[5, 5′-(1, 2-dimethyl-1, 2-diphenyl-disilanylene)-2, 2′-dithienylene] (4d) was found to be photoactive, but the others were inactive. When the thin solid films prepared from the polymers 4a–4e by spin-coating were exposed to antimony(V) fluoride in vacuo, the films became conducting; their conductivities were determined to be 10^?2 – 10^?3 S cm^?1 by the four-probe method.     

Synthesis and Characterization of Poly(methylsiloxane)S Containing 4-[S(-)-2-Methyl-1 -Butoxy1-4′ -[p-(ω-alkan-l-yloxy)benzoyloxy]-α-methylstilbene Side Groups

The syntheses of poly(methylsiloxane)s containing 4-[S(-)-L-methyl-1 -butoxy] -4′-[p-(ω -alkan -1 -yloxy)benzoyloxy] -a-methylstilbene side groups containing 11-undecanyl (18), 8-octyl (19), 6-hexyl (20), and 3-propyl (21), of a poly[(50-55%)-methyl-co-(45-50%)-dimethylsiloxane] containing 4-[S(-)-2-methyl-1-butoxy]-4′-[p-(8-octan-1-yloxy)benzoyloxy]-α-methylstilbene side groups (22) and of a poly(methylsiloxane) containing a 1:1 molar ratio of 4-[S(-)-2-methyl-1 -butoxyl]-4′ -[p-(8-octan-1 -yloxy)benzoyloxy] -α-methylstilbene and 4-[S(-)-2-methyl-l -butoxyl-4′ -[p-(6-hexan-1-yloxy)-benzoyloxyl-α-methylstilbene side groups (23) are described. All polymers and copolymers were characterized by a combination of differential scanning calorimetry and thermal optical polarized microscopy techniques. 18 exhibits an enantiotropic S _A, while 19, 20, 21, and 23 display both enantiotropic s _A and S*_c mesophases. 22 exhibits only an enantiotropic s: mesophase. In addition, all polymers and copolymers exhibit sidechain crystallization. These results have demonstrated that extending the length of the rigid part of the mesogenic unit of 4-[S(-)-2-methyl-l-butoxy]-4′-(ω-alkan-l-yloxy)-α-methylstilbene to 4-[S(-)-2-methyl-l-butoxy]-4′ -[p-(ω-alkan-l -yloxy)benzoyloxy]-α-methylstilbene increases the tendency of the resulting poly(methylsiloxane)s toward polymesomorphism.     

Syntheses of Conjugated Polymers for Photonics

Summary: By the Suzuki coupling reaction of 9,9-dioctyl-2,7-bis(1,3,2-dioxaborinan-2-yl)fluorene ( I ) and 3,5-di-tert-butylphenyl 2,5-dibromobenzenesulfonate ( II ) the alternating poly{[9,9-dioctylfluoren-2,7-diyl]-alt-[2-(3,5-di-tert-butyl-phenoxysulfonyl)-1,4-phenylene]} ( III ) was synthesized. Alkaline hydrolysis of III gave a conjugated polyelectrolyte carrying sulfonic acid groups ( IV ). Monomers 2,5-dibromo-3-[2-(pyren-1-yl)vinyl]thiophene and 2,5-dibromo-3-[2-(quinolin-4-yl)vinyl)thiophene were prepared and copolymerized with I to afford poly{[9,9-dioctylfluoren-2,7-diyl]-alt-[3-(2-(pyren-1-yl)vinyl)thiophen-2,5-diyl]} ( V ) and poly{[9,9-dioctylfluoren-2,7-diyl]-alt-[3-(2-(quinolin-4-yl)-vinyl)thiophen-2,5-diyl] ( VI ), respectively. Conjugated backbone of V contains the conjugated pyrene unit in the side chain. Similarly the side chain of VI contains the conjugated quinoline structure unit which can be for instance protonated. By the Suzuki polycondensation reaction of I and of the prepared methyl 3-(2,7-dibromocarbazole-9-yl)propionate ( VII ) the new poly{[9,9-dioctylfluorene-2,7-diyl]-alt-[9-(2-methoxycarbonylethyl)carbazole-2,7-diyl]} ( VIII ) was synthesized and characterized.     

Effects of substituted side‐chain position on donor–acceptor conjugated copolymers

The optical properties and electrical properties of a series of low‐band‐gap conjugated copolymers, in which alkyl side chains were substituted at various positions, were investigated using donor–acceptor conjugated copolymers consisting of a cyclopentadithiophene derivative and dithienyl‐benzothiadiazole. With substituted side chains, the intrinsic properties of the copolymers were significantly altered by perturbations of the intramolecular charge transfer. The absorption of poly[2, 6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3,4‐b′]dithiophene)‐alt‐4, 7‐bis(4‐octyl‐thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐ttOTBTOT ( P2 )], which assumed a tail–tail configuration, tended to blue shift relative to the absorption of poly[2,6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3,4‐b′]dithiophene)‐alt‐4,7‐bis (thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐TBTT ( P1 )]. The absorption of poly[2,6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3, 4‐b′]dithiophene)‐alt‐4,7‐bis(3‐octyl‐thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐hhOTBTOT ( P3 )], which assumed a head–head configuration, was blue shifted relative to that of P2 . The electrical transport properties of field‐effect transistors were sensitive to the side chain position. The field‐effect mobility in P2 (μ₂ = 1.8 × 10^?3 cm²/V s) was slightly lower than that in P1 (μ₁ = 4.9 × 10^?3 cm²/V s). However, the mobility of P3 was very low (μ₃ = 3.8 × 10^?6 cm²/V s). Photoexcitation spectroscopy showed that the charge generation efficiency (shown in transient absorption spectra) and polaron pair mobility in P1 and P2 were higher than in P3 , yielding P1 and P2 device performances that were better than the performance of devices based on P3 . © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of poly(phenylacetylene)s carrying oligo(ethylene oxide) pendants

A group of new amphiphilic poly(phenylacetylene)s bearing polar oligo(ethylene oxide) pendants, poly{4‐[2‐(2‐hydroxyethoxy)ethoxy]phenylacetylene} ( 1 ), poly(4‐{2‐[2‐(2‐hydroxyethoxy)‐ethoxy]ethoxy}phenylacetylene) ( 2p ), poly(3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxy}phenylacetylene) ( 2m ), poly(4‐{2‐[2‐(2‐methanesulfonyloxyethoxy)ethoxy]ethoxy}phenylacetylene) ( 3 ), poly(4‐{2‐[2‐(p‐toluenesulfonyloxyethoxy)ethoxy]ethoxy}phenylacetylene) ( 4 ), poly(4‐{2‐[2‐(2‐trimethylsilyloxy‐ethoxy)ethoxy] ethoxy}phenylacetylene) ( 5 ), and poly(4‐{2‐[2‐(2‐chloroethoxy)ethoxy]ethoxy}phenylacetylene) ( 6 ), were synthesized with organorhodium complexes as the polymerization catalysts. The structures and properties of the polymers were characterized with IR, UV, NMR, and thermogravimetric analysis. 1 , 2p , and 2m , the three polymers containing pendants with hydroxyl groups, were oligomeric or insoluble. The organorhodium complexes worked well for the polymerization of the monomers without hydroxyl groups, giving soluble polymers 3 – 6 with a weight‐average molecular weight up to ～160 × 10³ and a yield up to 99%. Z‐rich polymers 3 – 6 could be prepared by judicious selections of the catalyst under optimal conditions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1153–1167, 2006     

ipso‐Arylative Ring‐Opening Polymerization as a Route to Electron‐Deficient Conjugated Polymers

ipso‐Arylative ring‐opening polymerization of 2‐bromo‐8‐aryl‐8H‐indeno[2,1‐b]thiophen‐8‐ol monomers proceeds to M_n up to 9 kg mol^?1 with conversion of the monomer diarylcarbinol groups to pendent conjugated aroylphenyl side chains (2‐benzoylphenyl or 2‐(4‐hexylbenzoyl)phenyl), which influence the optical and electronic properties of the resulting polythiophenes. Poly(3‐(2‐(4‐hexylbenzoyl)phenyl)thiophene) was found to have lower frontier orbital energy levels (HOMO/LUMO=?5.9/?4.0 eV) than poly(3‐hexylthiophene) owing to the electron‐withdrawing ability of the aryl ketone side chains. The electron mobility (ca. 2×10^?3 cm² V^?1 s^?1) for poly(3‐(2‐(4‐hexylbenzoyl)phenyl)thiophene) was found to be significantly higher than the hole mobility (ca. 8×10^?6 cm² V^?1 s^?1), which suggests such polymers are candidates for n‐type organic semiconductors. Density functional theory calculations suggest that backbone distortion resulting from side‐chain steric interactions could be a key factor influencing charge mobilities.     

Urea-based polyacetylenes as an optical sensor for fluoride ions

Novel acetylenes carrying urea groups, 1-(4-ethynylphenyl)-3-(4-nitrophenyl) urea (1), 1-(4-propargyl)-3-(4-nitrophenyl) urea (2), were synthesized and polymerized with rhodium catalyst. Polymers [poly(1) and poly(2)] with moderate molecular weights were obtained in good yields. The anion sensing ability of poly(1) and poly(2) was estimated using the tetra-n-butylammonium (TBA) salts of a series of anions in DMF. Upon the addition of F-, the color of the DMF solution of poly(1) and poly(2) immediately turned to a different color, while the color of solution changed slightly upon addition of Cl-, HSO4-, Br-, and NO3-, indicating the F- sensing ability of poly(1) and poly(2). The 1H-NMR titrations of poly(1) revealed that the colorimetric response of poly(1) was triggered by the urea/F- interaction through the hydrogen bonding and/or deprotonation process. The absorption spectra titration and Hill plot analysis were carried out to measure the F- binding ability, and the Hill coefficient in the poly(1)/F- complexation was found to be 5.8. This result clearly indicated that this binding mode between poly(1) and F- was based on a positive homotropic allosterism.     

Effect of side‐chain end groups on the optical,electrochemical, and photovoltaic properties of side‐chain conjugated polythiophenes

Three new side‐chain conjugated polythiophene derivatives, poly{3‐[2‐(3‐methoxy‐4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3MOPVT), poly{3‐[2‐(3,5‐dimethoxy‐4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3DMOPVT), and poly{3‐[2‐(3,4‐dioctyloxy‐phenyl)‐vinyl]‐thiophene} (P3DOPVT), were synthesized by Wittig‐Hornor reaction and GRIM method and compared with poly{3‐[2‐(4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3OPVT) for investigating the effect of the end groups of the conjugated side‐chain on the properties of the polymers. Owing to the electron‐donating ability of methoxy groups, the visible absorption peaks of P3MOPVT and P3DMOPVT solutions and films become stronger and red‐shifted compared with P3OPVT. The electrochemical bandgaps of the four polymers are 2.15 eV for P3OPVT, 1.99 eV for P3MOPVT, 1.85 eV for P3DMOPVT, and 2.36 eV for P3DOPVT, respectively, which indicate that the electron‐donating ability of the methoxy end group on the conjugated side chain of P3MOPVT and P3DMOPVT and the large steric hindrance of the two octyloxy end groups on the conjugated side chain of P3DOPVT have obvious influence on the electrochemical properties of the side‐chain conjugated polythiophenes. Polymer solar cells were fabricated with a structure of ITO/PEDOT:PSS/Polymer:PCBM/LiF/Al. The best device, based on P3DMOPVT, shows a power conversion efficiency of 1.63% under the illumination of AM1.5, 80 mW/cm². © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4916–4922, 2006     

Trimethylsilyl-group containing polyphenylacetylenes for oxygen and ethanol permselective membranes

Phenylacetylenes having one or two trimethylsilyl groups at their benzene ring were synthesized, and polymerized by [Rh(cyclooctadiene) (PPh₃)₂]PF₆, [Rh(norbornadiene)Cl]₂, or WCl₆ to afford high molecular-weight polymers in high yields. These poly(phenylacetylene)s were soluble in many kinds of solvents and were fabricated to tough membranes by the solvent casting method. The oxygen permselectivities of these membranes were very good. The oxygen permeability coefficients (P_o2) and oxygen separation factors (α = P_o2/P_N2) of poly[2,4-(o,p)-bis(trimethylsilyl)phenylacetylene] [poly ( o-1-p-1 )] and poly[(4(p)-trimethylsilyl)phenylacetylene] [poly( p-1 )] membranes were 4.73 × 10^?8 cc(STP) cm/cm² s cmHg and 2.65, and 1.52 × 10^?8 cc(STP) cm/cm² s cmHg and 3.39, respectively. In the case of poly( o-1-p-1 ), P_o2 was comparable to that of polydimethylsiloxane (PDMS) and α was higher than that of PDMS. However, the P_o2 value reduced to 48% of its initial value in about 1 year. In the case of poly( p-1 ), the P_o2 value did not change in about 1 year. Ethanol permeated preferentially through these membranes (α^EtOH > 1) in pervaporation of aqueous ethanol solution, whereas poly(phenylacetylene) [poly( PhA )] showed water permselectivity (α^EtOH < 1). These favorable effects of trimethylsilyl groups on the oxygen and ethanol permselectivities were discussed on the basis of comparison with those of poly( PhA ), other poly(substituted phenyl-acetylene)s, and trimethylsilyl-group containing polystyrenes. © 1994 John Wiley & Sons, Inc.     

Polymerization of diphenylacetylenes having very bulky silyl groups and polymer properties

Polymerization and polymer properties of 1-phenyl-2-[4-(triphenylsilyl)phenyl]acetylene (pPh₃SiDPA) and 1-phenyl-2-[4-(triisopropylsilyl)phenyl]acetylene (piPr₃SiDPA), which have very bulky silyl groups, were examined. These monomers polymerized in good yields in the presence of TaCl₅-based catalysts. The highest weight-average molecular weights of poly(pPh₃SiDPA) and poly(piPr₃SiDPA) reached about 1 × 10⁶ and 4.8 × 10⁶, respectively. The polymers were yellow to orange-colored solids which were soluble in toluene, chloroform, etc., and provided free-standing films by solution casting. The onset temperatures of weight loss of poly(pPh₃SiDPA) and poly(piPr₃SiDPA) in TGA in air were 430 and 270°C, respectively. The oxygen permeability coefficients of poly(pPh₃SiDPA) and poly(piPr₃SiDPA) at 25°C were 3.8 and 20 barrers, respectively, and relatively small. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2721–2725, 1998     

Synthesis and Rh(I)‐catalyzed polymerization of 1,3‐diphenylyne–calix[4]arene compounds: Novel conjugated,calixarene‐based polymers

The synthesis of two 1,3‐bis(4‐ethynylbenzyloxy)calix[4]arenes, 5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 1 ) and 25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 2 ), was accomplished through Sonogashira coupling of appropriate calixarene derivatives. Methods for the polymerization of these bifunctional building blocks with Rh(I) as a catalyst, leading ultimately to conjugated polymers having calix[4]arene units incorporated into the main chain, were explored. Calixarenes 1 and 2 were efficiently polymerized with rhodium‐based initiators and afforded the conjugated polymers poly{5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene} ( poly 1 ) and poly{25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene}. Depending on the conditions, high conversions and good yields were obtained. The effects of adding cocatalysts (NHEt₂ and/or PPh₃) were studied in connection with the number‐average molecular weight and the molecular weight distribution of the resultant polymer ( poly 1 ) and tentatively correlated with the formation of low‐molecular‐weight materials. A catalytic system containing triphenylphosphine as the sole additive ([Rh(nbd)Cl]₂; [Rh]/[PPh₃] = 0.5) proved to be the best for the polymerization of p‐tert‐butylcalixarene compound 1 . Linear polymers having high number‐average molecular weights (up to 1.1 × 10⁵ g mol^?1) with low polydispersities were produced under these conditions. For debutylated homologue 2 , its polymerization was best carried out in the absence of any added cocatalyst. A cyclopolymerization route, comprising the intramolecular ring closing of the calix[4]arene pendant ethynyl groups followed by an intermolecular propagation step, is advanced to explain the results. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7054–7070, 2006     

Synthesis of a variety of star‐shaped polybenzamides via chain‐growth condensation polymerization with tetrafunctional porphyrin initiator

A variety of well‐defined tetra‐armed star‐shaped poly(N‐substituted p‐benzamide)s, including block poly(p‐benzamide)s with different N‐substituents, and poly(N‐substituted m‐benzamide)s, were synthesized by using porphyrin‐cored tetra‐functional initiator 2 under optimized polymerization conditions. The initiator 2 allowed discrimination of the target star polymer from concomitantly formed linear polymer by‐products by means of GPC with UV detection, and the polymerization conditions were easily optimized for selective synthesis of the star polybenzamides. Star‐shaped poly(p‐benzamide) with tri(ethylene glycol) monomethyl ether (TEG) side chain was selectively obtained by polymerization of phenyl 4‐{2‐[2‐(2‐methoxyethoxy)ethoxy]ethylamino}benzoate ( 1b ′) with 2 at ?10 °C in the case of [ 1b ′]₀/[ 2 ]₀ = 40 and at 0 °C in the case of [ 1b ′]₀/[ 2 ]₀ = 80. Star‐shaped poly(p‐benzamide) with 4‐(octyloxy)benzyl (OOB) substituent was obtained only when methyl 4‐[4‐(octyloxy)benzylamino]benzoate ( 1c ) was polymerized at 25 °C at [ 1c ]₀/[ 2 ]₀ = 20. On the other hand, star‐shaped poly(m‐benzamide)s with N‐butyl, N‐octyl, and N‐TEG side chains were able to be synthesized by polymerization of the corresponding meta‐substituted aminobenzoic acid alkyl ester monomers 3 at 0 °C until the ratio of [ 3 ]₀/[ 2 ]₀ reached 80. However, star‐shaped poly(m‐benzamide)s with the OOB group were contaminated with linear polymer even when the feed ratio of the monomer 3d to 2 was 20. The UV–visible spectrum of an aqueous solution of star‐shaped poly(p‐benzamide) with TEG side chain indicated that the hydrophobic porphyrin core was aggregated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Structure of self-assembled multilayers prepared from water-soluble polythiophenes

We have studied the structure and morphology of self-assembled polyelectrolyte multilayers prepared using poly(styrenesulfonate) (PSS) and four different cationic poly(alkoxythiophene) derivatives bearing methylimidazolium-terminated ionic side chain at the 3-position of the thiophene ring: poly(1-methyl-3-[3-[3-thienyloxy]-propyl]-1H-imidazolium) (P3TOPIM), poly(1-methyl-3-[6-[3-thienyloxy]-hexyl]-1H-imidazolium) (P3TOHIM), poly(1-methyl-3-[2-[(4-methyl-3-thienyl)oxy]-ethyl]-1H-imidazolium ) (P4Me-3TOEIM), and poly(1-methyl-3-[6-[(4-methyl-3-thienyl)oxy]-hexyl]-1H-imidazolium ) (P4Me-3TOHIM). All the multilayers exhibited regular growth. The thickness of the multilayers was measured with ellipsometry, their layer-by-layer growth was followed by polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS) and ellipsometry, and the morphology of the films was studied by atomic force microscopy (AFM). The length of the methylimidazolium-terminated side chain (C(n), n = 2, 3, 6) and the substituent (H or Me) at the 4-position of the thiophene ring were varied. All multilayers were inhomogeneous in the sub-micrometer scale and contained aggregates of two kinds. The large ones with a low and constant surface number density were attributed to PSS, whereas the small aggregates were polythiophene-based. The surface density of these organic semiconducting nanoparticles greatly depended on the structure of polythiophene, being favored by polymer regioregularity and the length of the side chain. The side chains remained disordered in all the multilayers, but with polythiophenes having hexyl chains both the imidazolium and thiophene rings tended to orient themselves more perpendicular to the surface than in films containing shorter chains (C2 or C3). The relative water content of the multilayers (at 7.1% relative humidity) did not depend on the film thickness and was the lowest for P4Me-3TOHIM. As the number of bilayers increased the methylimidazolium-sulfonate ion pairs gradually weakened and became more individually hydrated.     

Synthesis and Characterization of Polymethacrylates,Polyacrylates, and Poly(Methylsiloxane)S Containing 4-[S(-)-2-Methyl-1-Butoxy]-4′-(ω-Alkanyl-1-OXY)-α-Methylstilbene Side Groups

Abstract

The synthesis and characterization of polymethacrylates, polyacrylates, and poly(methylsiloxane)s containing 4-[S(-)-2-methyl-1-butoxy]-4′-(ω-alkanyl-1-oxy)-α-methylstilbene side groups with ω-alkanyl from 11-undecanyl to 2-ethyl are presented. According to both differential scanning calorimetry and thermal optical polarized microscopy analyses, the poly(methylsiloxane)s containing 1-octyl and 1-hexyl as ω-alkanyl groups exhibit enantiotropic S _A and S _C* mesophases. All other polymers display only an enantiotropic S _A mesophase.     

A general synthesis of side chain derivatives of Δ9-thc

The synthesis of (6aR, 10aR)-trans-3-[1′,3′-dithian-2′-yl]-6a,7,8,10a-tetrahydro-6,6,9- trimethyl-6H-dibenzo[b,d]pyran-l-ol t-butyldimethylsilyl ether ($\text{4b}$) is reported. The use of this compound as a source of side chain derivatives of cannabinoids is illustrated by syntheses of 1′-,2′-,3′- and 4′-hydroxy-Δ⁹-THC, and 3-carboxy-6,6,9-trimethyl-6H-dibenzo[b,d]pyran-1-o1 ($\text{6}$).     

The equilibrium and kinetic rigidity of additive poly(trimethylsilyltricyclononenes) with one and two Si(CH<Subscript>3</Subscript>)<Subscript>3</Subscript> groups in monomer unit

The homologous series of additive poly[3-(trimethylsilyl)tricyclononene-7] with two heminal substituents Si(CH₃)₃ in the side cycle of the monomer unit is studied for the first time via the methods of viscometry and static and dynamic light scattering in the range of molecular masses of (29–770) × 10³. The scaling ratios for the intrinsic viscosity and the coefficient of translational diffusion of macromolecules in toluene at 298 K are obtained, and the equilibrium rigidity of the polymer chain is determined. The hydrodynamic and conformation properties of the polymer are compared to an analog with only one Si(CH₃)₃ substituent in the monomer unit. It is found that the introduction of the second side substituent in the heminal position increases the equilibrium rigidity of the additive poly[3-(trimethylsilyl)tricyclononene-7] by 1.4 times and has a far stronger effect on the kinetic rigidity of the polymer. With the use of the ¹Н NMR relaxation method, it is shown that the mobility of side groups of the polymer with two substituents decreases significantly and the correlation times of hydrogen atoms of Si(CH₃)₃ groups exceed some 20 times the corresponding values for the analog with one Si(CH₃)₃ group in the monomer unit cycle.     

α‐Propargyl amino acid‐derived optically active novel substituted polyacetylenes: Synthesis,secondary structures,and responsiveness to ions

Novel optically active substituted acetylenes HC? CCH₂CR¹(CO₂CH₃)NHR² [(S)‐/(R)‐ 1 : R¹ = H, R² = Boc, (S)‐ 2 : R¹ = CH₃, R² = Boc, (S)‐ 3 : R¹ = H, R² = Fmoc, (S)‐ 4 : R¹ = CH₃, R² = Fmoc (Boc = tert‐butoxycarbonyl, Fmoc = 9‐fluorenylmethoxycarbonyl)] were synthesized from α‐propargylglycine and α‐propargylalanine, and polymerized with a rhodium catalyst to provide the polymers with number‐average molecular weights of 2400–38,900 in good yields. Polarimetric, circular dichroism (CD), and UV–vis spectroscopic analyses indicated that poly[(S)‐ 1 ], poly[(R)‐ 1 ], and poly[(S)‐ 4 ] formed predominantly one‐handed helical structures both in polar and nonpolar solvents. Poly[(S)‐ 1a ] carrying unprotected carboxy groups was obtained by alkaline hydrolysis of poly[(S)‐ 1 ], and poly[(S)‐ 4b ] carrying unprotected amino groups was obtained by removal of Fmoc groups of poly[(S)‐ 4 ] using piperidine. Poly[(S)‐ 1a ] and poly[(S)‐ 4b ] also exhibited clear CD signals, which were different from those of the precursors, poly[(S)‐ 1 ] and poly[(S)‐ 4 ]. The solution‐state IR measurement revealed the presence of intramolecular hydrogen bonding between the carbamate groups of poly[(S)‐ 1 ] and poly[(S)‐ 1a ]. The plus CD signal of poly[(S)‐ 1a ] turned into minus one on addition of alkali hydroxides and tetrabutylammonium fluoride, accompanying the red‐shift of λ_max. The degree of λ_max shift became large as the size of cation of the additive. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Side‐chain polypseudorotaxanes by threading cucurbit[7]uril onto poly‐N‐n‐butyl‐N′‐(4‐vinylbenzyl)‐4,4′‐bipyridinium bromide chloride: Synthesis,characterization, and properties

A novel side‐chain polypseudorotaxanes P4VBVBu/CB[7] was synthesized from poly‐N‐n‐butyl‐N′‐(4‐vinylbenzyl)‐4,4′‐bipyridinium bromide chloride (P4VBVBu) and cucurbit [7]uril (CB[7]) in water by simple stirring at room temperature. CB[7] beads are localized on viologen units in side chains of polypseudorotaxanes as shown by ¹H NMR, IR, XRD, and UV–vis studies, and it is considered that the hydrophobic and charge‐dipole interactions are the driving forces. TGA data show that thermal stability of the polypseudorotaxanes increases with the adding of CB[7] threaded. DLS data show that P4VBVBu and CB[7] could form polypseudorotaxanes, and the average hydrodynamic radius of the polypseudorotaxanes increases with increasing the concentration of CB[7]. The typical cyclic voltammograms indicate that the oxidation reduction characteristic of P4VBVBu is remarkably affected by the addition of CB[7] because of the formation of polypseudorotaxanes and the shielding effects of CB[7] threaded on the viologen units of polypseudorotaxanes. With the increase of the concentration of KBr or K₂SO₄, the formation of the polypseudorotaxanes was inhibited due to the shielding effects of both Br^? or SO to viologen ion and K⁺ to CB[7] by UV–vis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2135–2142, 2010     

Synthesis of aromatic polyethers by Scholl reaction. V. Synthesis and polymerization of 1,3-bis[4-(1-naphthoxy) benzoyl]benzene, 1,4-bis[4-(1-naphthoxy)benzoyl]benzene,bis[4-(1-naphthoxy)phenyl]methane, 1,3-bis[4-(1-naphthoxy) phenylmethyl]benzene,and 1,4-bis-[4-(1-naphthoxy)phenylmethyl]benzene

This article describes the synthesis and the cation-radical polymerization (Scholl reaction) of 1,3-bis[4-(1-naphthoxy) benzoyl] benzene ( 6 ) and 1,4-bis[4-(1-naphthoxy) benzoyl]- benzene ( 7 ) initiated by FeCI₃. This polymerization produced poly(ether ether ketone ketone)s (PEEKK) of number average molecular weight (M?_n) up to 5400 g/mol. The synthesis of bis[4-(1-naphthoxy) phenyl] methane ( 8 ), 1,3-bis[4-(1-napthoxy) phenylmethyl] benzene ( 9 ), and 1,4-bis[4-(1-naphthoxy) phenylmethyl] benzene ( 10 ) are also described. Polyethers of M?_n up to 15400 g/mol at a FeCl₃/monomer molar ratio of 2/1 were obtained. An increased polymerizability of the monomers 9 and 10 containing two CH₂ groups versus that of the corresponding monomers containing two carbonyl groups ( 6 and 7 ) was observed. This enhanced polymerizability was explained based on the increased nucleophilicity of monomers 9 and 10 .     

On the Modification of Chitosan Through Grafting

Abstract

The feasibility of grafting poly(methyl acrylate) and poly[1-(methoxycarbonyl) ethylene] onto chitosan, poly-β(1←-4)-2-amino-2-deoxy-d-glucose, was investigated. The grafting reaction was carried out in aqueous solution by using ferrous ammonium sulfate (FAS) in combination with H₂O₂ as redox initiator. The effects of such reaction variables as chitosan, monomer and initiator concentrations, reaction time, and reaction temperature were determined. Through this study the grafting reaction could be optimized. The grafting yield reached its maximum value of 332% when 0.3 g chitosan was copolymerized with 3 mL monomer at 70°C for 120 minutes with [FAS] = 6 × 10^?5 M, [H₂O₂] = 6 × 10^?3 M, and 8 mL water. The grafted chitosan was found to be insoluble in solvents for chitosan and solvents for poly(methyl acrylate), but did show swelling in dilute acetic acid, methanol, acetone, and in an ethanol/2% acetic acid 1:1 mixture. The thermal stability of chitosan and grafted chitosan were studied by dynamic thermogravimetric analysis. The results show that the graft copolymer is thermally more stable than pure chitosan. The overall activation energy for graft copolymerization was estimated to be 32.8 kcal/mol.