Oxidation of metronidazole with sodium N‐bromo‐p‐toluenesulfonamide in acid and alkaline media: A kinetic and mechanistic study

A kinetic study of oxidation of metronidazole (Met) with sodium N‐bromo‐p‐toluenesulfonamide or bromamine‐T (BAT) has been carried out in HClO₄ (30°C) and NaOH (40°C) media. The experimental rate laws obtained are –d[BAT]/dt=k[BAT][Met]^x [H⁺]^y in acid medium and –d[BAT]/dt=k[BAT][Met]^x [OH^?]^y/[PTS]^z in alkaline medium, where x, y, and z are less than unity and PTS is p‐toluenesulfonamide. The reaction was subjected to changes in (a) ionic strength, (b) concentration of added reduction product PTS, (c) concentration of added neutral salts, (d) dielectric permittivity, and (e) solvent isotope effect. In both media, the stoichiometry of the reaction was found to be 1:1, and the oxidation product of metronidazole was identified as its aldehyde. The reaction was studied at different temperatures, and the activation parameters have been evaluated. The reaction constants involved in the proposed schemes were deduced. The reaction was found to be faster in acid medium in comparison with alkaline medium, which is attributed to the involvement of different oxidizing species. Mechanisms proposed and the rate laws derived are consistent with the observed kinetics. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 700–709, 2005     

Oxidation of isoniazid by N‐haloarenesulfonamidates in alkaline medium: A kinetic and mechanistic study

The kinetics of oxidation of Isoniazid (INH) by sodium N‐haloarenesulfonamidates, chloramine‐T (CAT), bromamine‐T (BAT), chloramine‐B (CAB), and bromamine‐B (BAB), has been studied in alkaline medium at 303 K. The oxidation reaction follows identical kinetics with a first‐order dependence on each [oxidant] and [INH] and an inverse fractional‐order on [OH^−:]. Addition of the reaction product (p‐toluenesulfonamide or benzenesulfonamide) had no significant effect on the reaction rate. Variation of ionic strength and addition of halide ions have no influence on the rate. There is a negative effect of dielectric constant of the solvent. Studies of solvent isotope effects using D₂O showed a retardation of rate in the heavier medium. The reaction was studied at different temperatures, and activation parameters have been computed from the Arrhenius and Eyring plots. Isonicotinic acid was identified as the oxidation product by GC‐MS. A two‐pathway mechanism is pro‐posed in which RNHX and the anion RNX⁻ interact with the substrate in the rate‐limiting steps. The mechanism proposed and the derived rate laws are consistent with the observed kinetics. The rate of oxidation of INH increases in the order: BAT > BAB > CAT > CAB. This effect is mainly due to electronic factors. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 221–230, 2000     

Kinetics of oxidation of glycylglycine by bromamine-T in acid medium

The kinetics of oxidation of a typical dipeptide glycylglycine (GG) by bromamine-T have been studied in HClO₄ medium at 40°C. The rate shows first-order dependence on [BAT]₀ and is fractional order in [GG]₀ which becomes independent of [substrate]₀ at higher [GG]₀. At [H⁺ ] > 0.02mol dm⁻³, the rate is inverse fractional in [H⁺ ] but is zero order at lower [H⁺ ] (≤0.02 mol dm⁻³). Variation in ionic strength or dielectric constant of the medium had no significant effect on the rate. The solvent-isotope effect was measured and = 1.45. Proton inventory studies have been made. The reaction has been studied at different temperatures (308-323 K) and activation parameters have been computed.     

Oxidation of ethanolamines by sodium N‐bromobenzenesulfonamide in alkaline buffer medium: A kinetic and mechanistic study

The kinetics of oxidation of ethanolamines, monoethanolamine (MEA), diethanolamine (DEA), and triethanolamine (TEA), by sodium N‐bromobenzenesulfonamide or bromamine‐B (BAB) in alkaline buffer medium (pH 8.7–12.2) has been studied at 40°C. The three reactions follow identical kinetics with first‐order in [oxidant] and fractional‐order each in [substrate] and [OH^?]. Under comparable experimental conditions, the rate of oxidation increases in the order: DEA > TEA > MEA. The added reaction product, benzenesulfonamide, retards the reaction rate. The addition of halide ions and the variation of ionic strength of the medium have no significant effect on the rate. The dielectric effect is negative. The solvent isotope effect k′(H₂O)/k′(D₂O) ≈ 0.92. Activation parameters for the composite reaction and for the rate‐limiting step were computed from the Eyring plots. Michaelis‐Menten type of kinetics is observed. The formation and decomposition constants of ethanolamine‐BAB complexes are evaluated. An isokinetic relationship is observed with β = 430 K indicating that enthalpy factors control the rate. For each substrate, a mechanism consistent with the kinetic data has been proposed. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 480–490, 2001     

Kinetics of oxidation of indigo carmine by N-sodio-N-bromotoluenesulfonamide in acidic buffer medium

The kinetics of oxidation of indigo carmine (IC) by N-sodio-N-bromotoluenesulfonamide or bromamine-T (BAT) in pH 5 buffer medium has been investigated at 30°C using spectrophotometry at 610 nm. The reaction rate shows dependencies of first-order on [IC]₀ second-order on [BAT]₀, fractional order on [H⁺], and inverse first-order on [ρ-toluenesulfonamide]. The addition of chloride and bromide ions, and the variation of ionic strength of the medium have no influence on the reaction rate. There is a negative effect of the dielectric constant of the solvent. Activation parameters have been calculated. A single-pathway mechanism for the reaction, consistent with the kinetic data, has been proposed. © John Wiley & Sons, Inc. Int J Chem Kinet 29: 453–459, 1997     

Anionic polymerization of styrene in the presence of different anisoles

The butyllithium-initiated polymerization of styrene has been studied in toluene solution at 20°C in the presence of anisole, o-ethylanisole, and p-ethylanisole. The concentration of styrene was 0.16 mole/1.; the concentration of ether varied from 0.8 to 0.33 mole/1. The rates of initiation were followed spectrophotometrically at γ_max 330 mμ; they increased with increasing concentration of ether. The rates of propagation were measured dilatometrically. In the presence of anisole and p-ethylanisole, the rate expression is R_p = [M][PLi]^1/2(k₁ + k₂ [ether]), where k₁ is the propagation rate constant in pure hydrocarbon, k₂ that of the ether solvated chain end, and [PLi] denotes the concentration of polystyryllithium. On the contrary, o-ethylanisole did not affect the rate of propagation of styrene, possibly on account of the steric hindrance of the o-ethyl group. The apparent first-order termination rate constants were also determined spectrophotometrically at 20°C and compared to those of poly-o- and p-methoxystyryllithium. The following decreasing order of rate constant was found: poly-p-methoxystyryllithium > polystyryllithium-anisole > polystyryllithium–4-ethylanisole > polystyryllithium-2-ethylanisole > poly-o-methoxystyryllithium.     

Kinetic and mechanistic studies of indigocarmine oxidation by chloramine-T and chlorine in acidic buffer media

Oxidations of indigocarmine (IC) by chloramine-T (CAT) and aqueous chlorine (HOCl) in acidic buffer media, pH 2–6, have been kinetically studied at 30°C using spectrophotometry. The CAT reaction rate shows a first-order dependence on [IC]₀ and an inverse fractional order on [p-toluenesulfonamide]. The effect of [CAT] on the rate is strongly pH dependent with a variable order of 1–2 on [CAT]₀ in the pH range 6–2. The chlorine reaction rate follows first-order in [IC]₀ and [HOCl]₀ each in the pH range 6–2. Addition of halide ions and variation of ionic strength of the medium have no influence on the reaction rate. There is a negative effect of dielectric constant of the solvent. The kinetics of the IC oxidation with CAT at pH 6 and of that with HOCl at pHs 2–6 are similar suggesting similarity in their rate determining steps. A two-pathway mechanism for the CAT reaction and a one-pathway mechanism for the HOCl reaction, consistent with the kinetic data, have been proposed. Activation parameters have been calculated using the Arrhenius and Erying plots. © 1995 John Wiley & Sons, Inc.     

Kinetics and mechanism of bromamine-T oxidation of some cyclic ketones in acidic media

Kinetics of the oxidation cyclopentanone and cyclohexanone by bromamine-T(BAT) have been reported in perchloric acid media. A zero order dependence to BAT and first order dependence on both ketones and hydrogen ion concentrations have been observed. Observed stoichiometry, zero effects of ionic strength of the medium and p-toluenesulphonamide (TSA) and a negative dielectric effect point to a mechanism involving acid catalysed enolisation of ketones in the slow and rate determining step, followed by its subsequent fast interaction with BAT giving corresponding 1,2-diketones as final products. A solvent isotope effect (kD₂O/kH₂O = 2.0–2.2 (35°), 2.1–2.3 (40°) and 2.2–2.4 (35°), 2.3–2.5 (40°) for cyclopentanone and cyclohexanone, respectively) has been observed. Various thermodynamic parameters have been computed.     

Role of resin-manganese(II) complexes in hydrogen peroxide decomposition

The kinetics of hydrogen peroxide decomposition has been investigated in the presence of Wofatit KPS (4% DVB, 40–80 μm) resin in the form of mono (mea), di (dea), triethanolamine (tea), ethylenediamine (eda), and N,N′-diethylethylenediamine (deeda)- Mn(II) complexes. The rate constant k (per g dry resin) was evaluated over the temperature range 25–40°C. The reaction was first-order with respect to [H₂O₂]. The rate constant, k, with the three ethanolamines decreased in the following order mea > dea > tea which is the same order of basicity. Also, k value with deeda is lower than eda as a result of steric hindrance. The peroxo metal complex which formed at the beginning of the reaction, was found to contain the catalytic active species. The rate of reaction was proportional to [Mn-complex], [H₂O₂] and [H⁺]^?1. The activation parameters were calculated and a probable reaction mechanism is proposed. © 1994 John Wiley & Sons, Inc.     

Oxidation of some catecholamines by sodium N-chloro-p-toluenesulfonamide in acid medium: A kinetic and mechanistic approach

The kinetics of the oxidation of five catecholamines viz., dopamine (A), L-dopa (B), methyldopa (C), epinephrine (D) and norepinephrine (E) by sodium N-chloro-p-toluenesulfonamide or chloramine-T (CAT) in presence of HClO₄ was studied at 30±0.1 °C. The five reactions followed identical kinetics with a first-order dependence on [CAT] _o , fractional-order in [substrate] _o , and inverse fractional-order in [H⁺]. Under comparable experimental conditions, the rate of oxidation of catecholamines increases in the order D>E>A>B>C. The variation of ionic strength of the medium and the addition of p-toluenesulfonamide or halide ions had no significant effect on the reaction rate. The rate increased with decreasing dielectric constant of the medium. The solvent isotope effect was studied using D₂O. A Michaelis-Menten type mechanism has been suggested to explain the results. Equilibrium and decomposition constants for CAT-catecholamine complexes have been evaluated. CH₃C₆H₄SO₂NHCl of the oxidant has been postulated as the reactive oxidizing species and oxidation products were identified. An isokinetic relationship is observed with β=361 K, indicating that enthalpy factors control the reaction rate. The mechanism proposed and the derived rate law are consistent with the observed kinetics.     

Charge transfer polymerization of 2-vinyl pyridine initiated by n-butyl amine and carbon tetrachloride

2-Vinyl pyridine (2-VP) can be initiated by a charge-transfer complex formed by the interaction of aliphatic amines such as n-butylamine (nBA) and carbon tetrachloride (CCl₄) in a solvent like NN-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO). This article describes the polymerization of 2-VP by n-butylamine (nBA) in the presence of carbon tetrachloride in DMSO at 60°C. The rate of polymerization R_p increases rapidly with carbon tetrachloride (CCl₄) up to a concentration of 3.93 mol/L, but for a higher concentration it is almost independent of the carbon tetrachloride concentration; R_p is proportional to [nBA]^0.5 and [2-VP]^1.5 when [CCl₄]>[nBA]. The average rate constant k is 1.03 × 10^?5 L/mol s. When [CCl₄] < [nBA] the rate constant in terms of [2-VP] was 1.06 × 10^?5 s^?1 at 60°C and the overall rate constant was 1.035 × 10^?5 L/mol s at 60°C.     

Kinetics of oxidation of acidic amino acids by sodium N-bromobenzenesulphonamide in acid medium: A mechanistic approach

Kinetics of oxidation of acidic amino acids (glutamic acid (Glu) and aspartic acid (Asp)) by sodium N-bromobenzenesulphonamide (bromamine-B or BAB) has been carried out in aqueous HClO₄ medium at 30°C. The rate shows first-order dependence each on [BAB]_o and [amino acid]_o and inverse first-order on [H⁺]. At [H⁺] > 0·60 mol dm⁻³, the rate levelled off indicating zero-order dependence on [H⁺] and, under these conditions, the rate has fractional order dependence on [amino acid]. Succinic and malonic acids have been identified as the products. Variation of ionic strength and addition of the reaction product benzenesulphonamide or halide ions had no significant effect on the reaction rate. There is positive effect of dielectric constant of the solvent. Proton inventory studies in H₂O-D₂O mixtures showed the involvement of a single exchangeable proton of the OH⁻ ion in the transition state. Kinetic investigations have revealed that the order of reactivity is Asp > Glu. The rate laws proposed and derived in agreement with experimental results are discussed.     

Charge-transfer polymerization of butyl methacrylate

Butyl methacrylate (BuMA) can be polymerized by charge-transfer complexes formed by the interaction of ethanolamine (EA), BuMA, and carbon tetrachloride (CCl₄) in a non-aqueous solvent, such as N,N-dimethylformamide (DMF) or dimethyl sulfoxide (DMSO). The rate of polymerizationR _p is found to be linear with [BuMA] and proportional to both [CCl₄]^0.5 and [EA]^0.5 when [CCl₄]/[EA]≤1.R _p becomes independent of [CCl₄] when [CCl₄]/[EA]>1.R _p is proportional to [EA]^0.56 and to [BuMA]^1.30 when [CCl₄]>[EA]. The average rate constant at 30°C for the polymerization of BuMA in terms of monomer was 3.32×10⁻⁶ s⁻¹ when [CCl₄]/[EA]≤1, and 5.47×10⁻⁶ L/(mol s) when [CCl₄]/[EA]>1.     

Kinetics of oxidation of pantothenic acid by chloramine‐T in perchloric acid and in alkaline medium catalyzed by OsO4: A mechanistic approach

Kinetics of oxidation of pantothenic acid (PA) by sodium N‐chloro‐p‐toluenesulfonamide or chloramine‐T (CAT) in the presence of HClO₄ and NaOH (catalyzed by OsO₄) has been investigated at 313 K. The stoichiometry and oxidation products are same in both media; however, their kinetic patterns were found to be different. In acid medium, the rate shows first‐order dependence on [CAT]_o, fractional‐order dependence on [PA]_o, and inverse fractional‐order on [H⁺]. In alkaline medium, the rate shows first‐order dependence each on [CAT]_o and [PA]_o and fractional‐order dependence on each of [OH^?] and [OsO₄]. Effects of added p‐toluenesulfonamide and halide ions, varying ionic strength, and dielectric constant of medium as well as solvent isotope on the rate of reaction have been investigated. Activation parameters were evaluated, and the reaction constants involved in the mechanisms have been computed. The proposed mechanisms and the derived rate laws are consistent with the observed kinetics. © 2005 Wiley Periodicals, Inc. Int J Chem Kinet 37: 201–210, 2005     

Dediazoniation of Arenediazonium Ions in Homogeneous Solutions. Part XVII. Kinetics and mechanisms of dediazoniation of p-chlorobenzenediazonium tetrafluoroborate in weakly alkaline aqueous solutions in the presence of oxygen

The kinetics of dediazoniation of p-chlorobenzenediazonium tetrafluoroborate have been studied in buffer solutions in the pH-range 9.0–10.0, ionic strength I = 0.10, at 20.0° in glass and polytetrafluoroethylene vessels. The presence of oxygen (<5 ppb of O₂, 60 to 100 ppb of O₂, air, > 99% of O₂) has a decisive influence on the rate and kinetic order of the dediazoniation. Iodoacetic acid inhibits the reaction, whereas p-chlorophenol has a catalytic effect, and in air and >99% of O₂ it acts as an autocatalyst. The reaction is subject to general-base catalysis by water, hydroxyl ions, hydrogen carbonate and carbonate ions. The kinetic results are interpreted in conjunction with data concerning the reaction products [2] and a ¹⁵N-CIDNP. investigation of a related system [3]. Specific radical chain mechanisms are consistent with the results.     

Kinetic and mechanistic studies of some aliphatic amines' oxidation by sodium N‐bromo‐p‐toluenesulfonamide in hydrochloric acid medium

Oxidations of n‐propyl, n‐butyl, isobutyl, and isoamyl amines by bromamine‐T (BAT) in HCl medium have been kinetically studied at 30°C. The reaction rate shows a first‐order dependence on [BAT], a fractional‐order dependence on [amine], and an inverse fractional‐order dependence on [HCl]. The additions of halide ions and the reduction product of BAT, p‐toluenesulfonamide, have no effect on the reaction rate. The variation of ionic strength of the medium has no influence on the reaction. Activation parameters have been evaluated from the Arrhenius and Eyring plots. Mechanisms consistent with the preceding kinetic data have been proposed. The protonation constant of monobromamine‐T has been evaluated to be 48 ± 1. A Taft linear free‐energy relationship is observed for the reaction with ρ* = −12.6, indicating that the electron‐donating groups enhance the reaction rate. An isokinetic relationship is observed with β = 350 K, indicating that enthalpy factors control the reaction rate. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 776–783, 2000     

Kinetics and mechanism of photochemical reactions of peroxomonosulfate in the presence and absence of 2-propanol

The photochemical decomposition of peroxomonosulfate (PMS) in the presence and absence of 2-propanol at 25°C was found to obey an overall first-order rate – d[PMS]/dt = k_?[PMS]. In the absence of 2-propanol, the quantum yield ≤ for the decomposition of PMS was found to depend upon the concentration of PMS at [PMS] > 2 × 10^?M, and is independent of concentration at [PMS] > 2 × 10^?2M. The quantum yield in the presence of 2-propanol was found to be 3.03 at [PMS] = 1 × 10^?2M and 4.45 at higher concentrations of PMS. In the pH range of 2–9.0 the quantum yield was found to be independent of pH, and the overall rate constant k_? was found to be 6.49 × 10^?3 s^?1 and 1.68 × 10^?3 s^?1, respectively, in the presence and absence of isopropanol. A suitable chain mechanism is proposed and explained.     

Dual catalytic performance of arene-ruthenium amine complexes for norbornene ring-opening metathesis and methyl methacrylate atom-transfer radical polymerizations

Arene ruthenium(II) complexes bearing the cyclic amines RuCl₂(η⁶-p-cymene)(pyrrolidine)] ( 1 ), [RuCl₂(η⁶-p-cymene)(piperidine)] ( 2 ), and [RuCl₂(η⁶-p-cymene)(peridroazepine)] ( 3 ) were successfully synthesized. Complexes 1 – 3 were fully characterized by means of Fourier transform infrared, UV–visible, and NMR spectroscopy, elemental analysis, cyclic voltammetry, computational methods, and one of the complexes was further studied by single crystal X-ray crystallography. These compounds were evaluated as catalytic precursors for ring-opening metathesis polymerization (ROMP) of norbornene (NBE) and atom-transfer radical polymerization (ATRP) of methyl methacrylate (MMA). NBE polymerization via ROMP was evaluated using complexes 1 – 3 as precatalysts in the presence of ethyl diazoacetate (EDA) under different [NBE]/[EDA]/[Ru] ratios, temperatures (25 and 50°C), and reaction times (5–60 min). The highest yields of polyNBE were obtained with [NBE]/[EDA]/[Ru] = 5000/28/1 for 60 min at 50°C. MMA polymerization via ATRP was conducted using 1 – 3 as catalysts in the presence of ethyl-α-bromoisobutyrate (EBiB) as initiator. The catalytic tests were evaluated as a function of the reaction time using the initial molar ratio of [MMA]/[EBiB]/[Ru] = 1000/2/1 at 95°C. The increase in molecular weight as function of time indicates that complexes 1–3 were able to mediate the MMA polymerization with an acceptable rate and some level of control. Differences in the rate of polymerization were observed in the order 3 > 2 > 1 for the ROMP and ATRP.     

Chain-transfer constant of fluoroalcohols

Chain transfer constants of some fluoroalcohols [HCF₂(CF₂)_n?1CH₂OH, n = 2, 4, 6] in the catalyzed polymerization of vinyl acetate, styrene, acrylonitrile, and methyl methacrylate at 60°C have been evaluated by a method based on degree of polymerization. Since fluoroalcohols are normally nonsolvents for polymers, a homogeneous reaction phase is maintained by carrying out the polymerization in benzene (except in case of acrylonitrile, where no solvent was used). The transfer constants vary, depending on the reactivity as well as the polarity of the radicals, in the following order: vinyl acetate > styrene > methyl methacrylate > acrylonitrile. Of the three fluoroalcohols studied, the transfer constants increase with the increasing value of n. The results have been interpreted in terms of polar structure contribution in the transition state of the transfer reactions.     

Kinetics and Mechanism of the Reactions of Picolinic Acid with Dichloro-{1-alkyl-2-(arylazo)imidazole}palladium(II) Complexes

The reaction between Pd(N,N′)Cl₂ [N,N′ ≡ 1-alkyl-2-(arylazo)imidazole (N,N′) and picolinic acid (picH) have been studied spectrophotometrically at λ = 463 nm in MeCN at 298 K. The product is [Pd(pic)₂] which has been verified by the synthesis of the pure compound from Na₂[PdCl₄] and picH. The kinetics of the nucleophilic substitution reaction have been studied under pseudo-first-order conditions. The reaction proceeds in a two-step-consecutive manner (A → B → C); each step follows first order kinetics with respect to each complex and picH where the rate equations are: Rate 1 = {k′₀ + k′₂[picH]₀} × [Pd(N,N′)Cl₂] and Rate 2 = {k′′₀ + k′′₂[picH]₀}[Pd(N,O)(monodentate N,N′)Cl₂] such that the first step second order rate constant (k′₂) is greater than the second step second order rate constant (k′′₂). External addition of Cl⁻ (as LiCl) suppresses the rate. Increase in π-acidity of the N,N′ ligand, increases the rate. The reaction has been studied at different temperatures and the activation parameters (Δ^‡H° and Δ^‡S°) were calculated from the Eyring plot.