Synthesis,characterization and antimicrobial studies of mixed ligand silver(I) complexes of thioureas and triphenylphosphine; crystal structure of {[Ag(PPh3)(thiourea)(NO3)]2·[Ag(PPh3)(thiourea)]2(NO3)2}

Mixed ligand silver(I) complexes of triphenylphosphine and thioureas (thiourea (Tu), N-methylthiourea (Metu), N,N′-dimethylthiourea (Dmtu) and N,N′-diethylthiourea (Detu)) with the general formulae, [(Ph₃P)₂Ag(thione)]NO₃ and [(Ph₃P)Ag(thione)₂]NO₃, have been prepared and characterized by elemental analysis, IR and NMR (¹H, ¹³C and ³¹P) spectroscopic methods. The crystal structure of one of them has been determined by X-ray crystallography. The spectral data of the complexes are consistent with sulfur coordination of the thiones to silver(I). The single crystal X-ray structure of complex 1, {[Ag(PPh₃)(thiourea)(NO₃)]₂·[Ag(PPh₃)(thiourea)]₂(NO₃)₂}, shows that the complex consists of two independent centrosymmetric binuclear units, each having the silver atoms coordinated to one PPh₃ and two bridging thiourea molecules. In one of the independent units the silver atom is additionally bound to a nitrate ion, leading to a tetrahedral geometry, while in the other unit the silver atom adopts a trigonal planar environment. Antimicrobial activities of the complexes were evaluated by their minimum inhibitory concentration and the results showed that the complexes show a wide range of activity against two gram-negative bacteria (Escherichiacoli, Pseudomonasaeruginosa) and molds (Aspergillusniger, Penicilliumcitrinum), while the activities were poor against yeasts (Candidaalbicans, Saccharomycescerevisiae). However, the title complex did not show activity against any tested microorganism.     

Four isomers from the oxidative addition of Me3SnH to Os(CO)2(PPh3)3 and the crystal structure of Os(SnMeI2)I(CO)2(PPh3)2, in which the pairs of CO and PPh3 ligands are mutually trans

Reaction between Os(CO)₂(PPh₃)₃ and Me₃SnH produces Os(SnMe₃)H(CO)₂(PPh₃)₂ (1). Multinuclear NMR studies of solutions of 1 reveal the presence of four geometrical isomers, the major one being that with mutually cis triphenylphosphine ligands and mutually trans CO ligands. Os(SnMe₃)H(CO)₂(PPh₃)₂ undergoes a redistribution reaction, at the trimethylstannyl ligand, when treated with Me₂SnCl₂ giving Os(SnMe₂Cl)H(CO)₂(PPh₃)₂ (2). Solutions of 2 again show the presence of four isomers but now the major isomer is that with mutually trans triphenylphosphine ligands and mutually cis CO ligands. The redistribution reaction of 1 with SnI₄ produces Os(SnMeI₂)H(CO)₂(PPh₃)₂ (3) which exists in solution as only one isomer, that with mutually trans triphenylphosphine ligands and mutually trans CO ligands. Treatment of 3 with I₂ cleaves the Os-H bond with retention of geometry giving Os(SnMeI₂)I(CO)₂(PPh₃)₂ (4). The crystal structure of 4 has been determined. No isomerization of the trans dicarbonyl complex 4 occurs when 4 is heated, instead there is a formal loss of “MeSnI” and formation of OsI₂(CO)₂(PPh₃)₂ (5).     

Probing delocalisation across highly ethynylated mono and dinuclear Pt(II) tethers containing nitrogroups and organic models as redox active probes: X-ray crystal structure of trans-[Pt(CC-C6H4NO2)2(PPh3)2]

The electrochemical study on Pt(II) organometallic and organic ethynylated compounds bearing nitro substituents in the phenyl groups has been performed, demonstrating that the presence of severe chemical irreversibility accompanying the electron transfer, preclude an evaluation of the electronic communication between redox active centres. The X-ray structure of the complex trans-[Pt(CC-C₆H₄NO₂)₂(PPh₃)₂] is showed.     

Ate complexes of Ge(II) and Sn(II) with bidentate ligands [LiE(OCH2CH2NMe2)3]2 (E=Ge, Sn): synthesis and structure

The reaction of equimolar quantities of LiOCH₂CH₂NMe₂ and E¹⁴(OCH₂CH₂NMe₂)₂ (E¹⁴=Ge, Sn) in ether yielded new ate complexes [LiE¹⁴(OCH₂CH₂NMe₂)₃]₂ (E¹⁴=Ge (1), Sn (2)) with bidentate ligands. The compounds 1 and 2 are white crystalline substances which are highly soluble in THF and pyridine and very sensitive to the traces of oxygen and moisture. The structures of these compounds are studied by X-ray diffraction analysis. The ate complexes 1 and 2 are powerful nucleophiles and may be employed as ligands (neutral) in the coordination chemistry of the transition metals. The electronegative O-substituents at the divalent E¹⁴ atoms render them less oxidizable than alkyl- or aryl-substituted derivatives, and the bidentate ligands, owing to intramolecular donor-acceptor interactions, make them more thermodynamically stable compared to monodentate ligands.     

Reactivity of [ReOX3(PPh3)2] and [ReOX3(AsPh3)2] towards 2-(2-hydroxyphenyl)-1H-benzimidazole: Synthesis, X-ray studies, spectroscopic characterization and DFT calculations for [ReOX2(hpb)(EPh3)] and [ReO(OMe)(hpb)2]·MeCN

The paper presents a combined experimental and computational study of mono- and disubstituted Re(V) oxocomplexes obtained in the reactions of [ReOX₃(EPh₃)₂] (X = Cl, Br; E = P, As) with 2-(2-hydroxyphenyl)-1H-benzimidazole (Hhpb). From the reactions of [ReOX₃(PPh₃)₂] with Hhpb in molar ratio 1:1 cis and trans stereoisomers of [ReOX₂(hpb)(PPh₃)] were isolated, whereas the [ReOX₃(AsPh₃)₂] oxocompounds react with Hhpb to give only cis-halide isomers. The [ReOX₂(hpb)(EPh₃)] and [ReO(OMe)(hpb)₂]·MeCN complexes have been characterized spectroscopically and structurally (by single-crystal X-ray diffraction). The DFT and TDDFT calculations have been carried out for the trans-[ReOBr₂(hpb)(PPh₃)], cis-[ReOBr₂(hpb)(AsPh₃)] and [ReO(OMe)(hpb)₂], and their UV–Vis spectra have been discussed on this basis.     

Second-sphere coordination in hexaamminecobalt(III) salt with organic sulphonate anion: Synthesis, characterisation and X-ray crystal structure of [Co(NH3)6](CH3SO3)3

Reaction of hexaamminecobalt(III) chloride with the silver salt of methanesulphonic acid in aqueous medium (1:3 molar ratio) forms hexaamminecobalt(III) methanesulphonate, [Co(NH₃)₆](CH₃SO₃)₃, in high yield. This cobalt(III) complex has been characterized by spectroscopic techniques (UV/visible, IR and NMR) and its solubility product determined. The X-ray crystal structure shows that the [Co(NH₃)₆]³⁺ cations interact at the second sphere by sharing edges with the anions, via N–H  O hydrogen bonds. The structure is related to that of [Co(NH₃)₆]Cl(CH₃SO₃)₂, but is modified to accommodate additional anions in place of Cl⁻.     

Synthesis and crystal structure of the heteroleptic lanthanum(III) bis-diphosphinomethanide complex [La{CH(PPh2)2}2(I)(THF)2]

Treatment of CH₂(PPh₂)₂ with n-BuLi/t-BuOK in diethyl ether affords the potassium diphosphinomethanide complex [K{CH(PPh₂)₂}(OEt₂)_0.5] (1) in high yield. Metathesis of two equivalents of 1 with LaI₃(THF)₄ yields the heteroleptic bis-diphosphinomethanide complex [La{CH(PPh₂)₂}₂(I)(THF)₂] (2). X-ray crystallography shows the diphosphinomethanide ligands in 2 adopt different coordination modes in the solid state; one adopts a κ²-PP mode with no La-C contact, and the other adopts an η³-PCP mode, thus giving an eight-coordinate lanthanum centre.     

Synthesis and coordination chemistry of new tetradentate N2S2 donor Schiff-base ligand ca2-dapte: Mononuclear and dinuclear copper(I) complexes [Cu(ca2dapte)]ClO4 and [{Cu(PPh3)(X)}2(ca2dapte)] (X = I and Br)

A mononuclear copper(I) complex, [Cu(ca₂dapte)]ClO₄ (1), and two dinuclear copper(I) complexes, [{Cu(PPh₃)(X)}₂(ca₂dapte)] (X = I (2) and Br (3)), of a new tetradentate N₂S₂ donor Schiff-base ligand ca₂dapte have been prepared (ca₂dapte = N,N′-bis(trans-cinnamaldehyde)-1,2-di(o-iminophenylthio)ethane). These compounds have been characterized by elemental analyses (CHN), FT-IR, UV–Vis and ¹H NMR spectroscopy. The crystal structures of these copper(I) complexes have been determined by single-crystal X-ray diffraction. The coordination geometry around Cu(I) centers in these complexes is a distorted tetrahedron. The ca₂dapte is coordinated to Cu(I) as a tetradentate ligand in 1, while it acts as a bis-bidentate bridging ligand in 2 and 3.     

Crystal structure of a novel Hg(II) complex, [Hg(tri-2-furylphosphine)2(tri-2-furylphosphinoxide)3] [ClO4]2

The Hg(II) complex [Hg(TFP)₂(OTFP)₃][ClO₄]₂ with TFP=tri-2-furyl-phosphine and OTFP=tri-2-furylphosphinoxide has been prepared and characterised. It crystallises in the hexagonal P6₃/m space group with Z=2, a=13.308(3), c=21.092 (4) Å, V=3235(1) Å³. The structure of the complex cation consists of independent molecules with Hg pentacoordinated in exact trigonal bipyramidal geometry.     

Syntheses and study on nickel and copper complexes with 1,3,5-benzenetricarboxylic acid. Crystal and molecular structure of [Cu3(mdpta)3(btc)](ClO4)3 · 4H2O

Nickel and copper complexes containing 1,3,5-benzenetricarboxylic acid, with a combination of selected N-donor ligands and Schiff bases, of the composition Ni₃(bimz)₆(btc)₂ · 12H₂O (1), Ni₃(btz)₉(btc)₂ · 12H₂O (2), Ni₂(L₁)(btc) · 7H₂O (3), Ni₃(L₂)₂(Hbtc) · 9H₂O (4), Ni₂(L₃)(btc) · 4H₂O (5), Cu₂(L₄)(btc) · 7H₂O (6), [Cu₃(pmdien)₃(btc)](ClO₄)₃ · 6H₂O (7) and [Cu₃(mdpta)₃(btc)](ClO₄)₃ · 4H₂O (8); H₃btc = 1,3,5-benzenetricarboxylic acid, bimz = benzimidazole, btz = 1,2,3-benztriazole, L₁ = 2-[(phenylimino)methyl]phenol, L₂ = N,N′-bis-(salicylidene)propylenediamine, L₃ = 2-{[(2-nitrophenyl)methylene]amino}phenol, L₄ = 2-[(4-methoxy-phenylimino)methyl]phenol, pmdien = N,N,N′,N″,N″-pentamethyldiethylenetriamine, mdpta = N,N-bis-(3-aminopropyl)methylamine, have been synthesized. The complexes have been studied by elemental analysis, IR, UV–Vis spectroscopies, magnetochemical and conductivity measurements and selected compounds also by thermal analysis. The crystal and molecular structure of complex 8 was solved. The complex is trinuclear with btc³⁻-bridge. The coordination polyhedron around each copper atom can be described as a distorted square with a CuON₃ chromophore formed by one oxygen atom of carboxylate and three nitrogen atoms of mdpta. The magnetic properties of 8 have been studied in the 1.8–300 K temperature range revealing a very weak antiferromagnetic exchange interaction with J = −0.56 cm⁻¹ for g = 2.13(9). The antimicrobial activities against selected strains of bacteria were evaluated. It was found that only complex 5 is able to inhibit the growth of Staphylococcus strains.     

Trifluoroacetylacetonate rhodium(III) methyl complexes, cis-[Rh(TFA)(PPh3)2(CH3)(L)][BPh4] and cis-[Rh(TFA)(PPh3)2(CH3)(I)] (L = CH3CN, NH3, pyridine), in comparison with their acetylacetonate analogs

The oxidative addition of CH₃I to planar rhodium(I) complex [Rh(TFA)(PPh₃)₂] in acetonitrile (TFA is trifluoroacetylacetonate) leads to the formation of cationic, cis-[Rh(TFA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1), or neutral, cis-[Rh(TFA)(PPh₃)₂(CH₃)(I)] (4), rhodium(III) methyl complexes depending on the reaction conditions. 1 reacts readily with NH₃ and pyridine to form cationic complexes, cis-[Rh(TFA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (2) and cis-[Rh(TFA)(PPh₃)₂(CH₃)(Py)][BPh₄] (3), respectively. Acetylacetonate methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(I)] (5), was obtained by the action of NaI on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] in acetone at −15 °C. Complexes 1-5 were characterized by elemental analysis, ³¹P{¹H}, ¹H and ¹⁹F NMR. For complexes 2, 3, 4 conductivity data in acetone solutions are reported. The crystal structures of 2 and 3 were determined. NMR parameters of 1-5 and related complexes are discussed from the viewpoint of their isomerism.     

配合物[Cd(NIT4Py)2][Au(CN)2]2的合成与晶体结构

A Cd(II)-nitronyl nitroxide radical complex with dicyanoaurate(I) bridges [Cd(NIT4Py)₂][Au(CN)₂]₂, was synthesized and characterized by elemental analyses, IR spectrum and X-ray diffraction single-crystal structure analysis. Crystal data for the complex: triclinic, space group P1, a=0.720 9(11) nm, b=0.960 3(15) nm, c=1.284(2) nm, α=75.38(2)°, β=85.46(2)°, γ=68.38(2)°, V=0.800(2) nm³, Z=1, and R₁ [I>2σ(I)]=0.055 8. The title complex consists of infinite one-dimensional chains of [Cd(NIT4Py)₂][Au(CN)₂]₂, in which [Cd(NIT4Py)₂] moieties are conne-cted by [Au(CN)₂]^- μ₂-bridging ligands. Each cadmium(II) ion is six-coordinated in a distorted and centrosymmetric octahedral environment. CCDC: 258357.     

Intra- and intermolecular hydrogen bonds in [Ag(PPh3)3(HL)] complexes [H2L: H2xspa = 3(aryl)-2-sulfanylpropenoic acids; H2cpa = 2-cyclopentylidene-2-sulfanylacetic acid]

Compounds of the type [Ag(PPh₃)₃(HL)] {H₂xspa=3(aryl)-2-sulfanylpropenoic acids: x = Clp [3-(2-chlorophenyl)-], -o-mp [3-(2-methoxyphenyl)-], -p-mp [3-(4-methoxyphenyl)-], -o-hp [3-(2-hydroxyphenyl)-], -p-hp [3-(4-hydroxyphenyl-); H₂cpa = 2-cyclopentylidene-2-sulfanylacetic acid} were synthesized and characterised by IR and NMR (¹H ¹³C and ³¹P) spectroscopy and by FAB mass spectrometry. The crystal structures of [Ag(PPh₃)₃(HClpspa)], [Ag(PPh₃)₃(H-o-mpspa)], [Ag(PPh₃)₃(H-p-mpspa)] and [Ag(PPh₃)₃(Hcpa)] reveal the presence of discrete molecular units containing an intramolecular O-H···S hydrogen bond between the S atom and one of the O atoms of the COOH group. This intramolecular hydrogen bond remains in [Ag(PPh₃)₃(H-o-hpspa)]·EtOH and [Ag(PPh₃)₃(H-p-hpspa)] but in both cases polymeric structures are built on the basis of O-H···O interactions that involve the -OH substituent of the phenyl group of the sulfanylpropenoate fragment.     

A 2-iridathiophene from reaction between IrCl(CS)(PPh3)2 and Hg(CHCHPh)2

The thiocarbonyl analogue of Vaska’s compound is produced in high yield by first treating IrCl(CO)(PPh₃)₂ with CS₂ and methyl triflate to give [Ir(κ²-C[S]SMe)Cl(CO)(PPh₃)₂]CF₃SO₃ (1), secondly, reacting 1 with NaBH₄ to give IrHCl(C[S]SMe)(CO)(PPh₃)₂ (2), and finally heating 2 to induce elimination of both MeSH and CO to produce IrCl(CS)(PPh₃)₂ (3). When IrCl(CS)(PPh₃)₂ is treated with Hg(CHCHPh)₂ the novel 2-iridathiophene, Ir[SC₃H(Ph-3)(CHCHPh-5)]HCl(PPh₃)₂ (4) is produced. The X-ray crystal structure of the iodo-derivative of 4, Ir[SC₃H(Ph-3)(CHCHPh-5)]HI(PPh₃)₂ (5) confirms the unusual 2-metallathiophene structure. Treatment of IrCl(CS)(PPh₃)₂ with Hg(CHCPh₂)₂ produces both a coordinatively unsaturated 1-iridaindene, Ir[C₈H₅(Ph-3)]Cl(PPh₃)₂ (6) and a chelated dithiocarboxylate complex, Ir(κ²-S₂CCHCPh₂)Cl(CHCPh₂)(PPh₃)₂ (7). X-ray crystal structure determinations for 6 and 7 are reported.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

Mo(CO)3(NCMe)(PPh3)2: Synthesis, X-ray structure and evaluation of its catalytic activity for the homogeneous hydrogenation of olefins and their mixtures

The complex Mo(CO)₃(NCMe)(PPh₃)₂, was synthesized by the reaction of Mo(NCMe)₃(CO)₃ with two equivalents of PPh₃ and characterized by UV–Vis, IR, NMR and X-ray diffraction. This complex was used as a catalyst precursor for the hydrogenation of 1-hexene, styrene, cyclohexene and 2,3-dimethyl-1-butene and their mixtures under moderate conditions in homogeneous media. Under mild reaction conditions (T = 373 K, P = 60 atm), the substrates showed the following reactivity order: styrene > 1-hexene > cyclohexene > 2,3-dimethyl-1-butene. A quaternary equimolar mixture showed a different hydrogenation order: 1-hexene > cyclohexene > styrene > 2,3-dimethyl-1-butene; the presence of dibenzothiophene or mercury does not interfere with the activity of the catalyst.     

Photochemical reaction of W(CO)6 with SnCl4 II. Synthesis and X-ray structure of tetrachlorobis(triphenylphosphine oxide)tungsten(IV), [WCl4(OPPh3)2]

The crystal structure of [WCl₄(OPPh₃)₂](1), formed in the photochemical reaction of W(CO)₆ with SnCl₄ in the presence of triphenylphosphine, has been determined by the single-crystal X-ray diffraction method. The compound crystallizes in the monoclinic space C2/c, with A=14.027(3), B=13.163(3), C=19.621(4) Å, β=96.36(3)°, Z=4. The structure solved by heavy-atom methods has been refined to R=0.0466, for 3489 observed reflections.

The [WCl₄(OPPh₃)₂] molecule possesses a crystallographically imposed C₂ axis passing through the tungsten atom. Despite steric demands, a mutually cis arrangement of triphenylphosphine oxide oxygens is found for [WCl₄(OPPh₃)₂], while there is a slight lengthening of the W---Cl bonds trans to the oxygen atoms.     

Novel bicyclic hexanuclear copper(I) aggregate: Structure and solid state P CPMAS NMR spectra of [(Cu3L3)2] and [Cu(PPh3)2L] complexes of N-(diisopropoxythiophosphinyl)-N′-phenylthiourea (HL)

A new complex of N-thiophosphorylthiourea PhNHC(S)NHP(S)(OiPr)₂ (HL) of formula [(Cu₃L₃)₂] has been synthesized and characterized by single crystal X-ray diffraction, FT-IR, ¹H, ³¹P NMR in solution and by ³¹P CPMAS NMR spectroscopy in the solid state. A comparison of the structure and the spectral parameters of [(Cu₃L₃)₂] with those of the mononuclear analogue [Cu(PPh₃)₂L] was performed. In the solid state the aggregate [(Cu₃L₃)₂] represents the first example of a spontaneous “side-by-side” association of two neutral cyclic [Cu₃L₃] moieties using two Cu-S-Cu bridges formed by the sulfur atoms of the PS-groups. The values of the ¹J(³¹P-^63,65Cu) and ²J(³¹P-³¹P) coupling constants of the [Cu(PPh₃)₂]⁺ moiety in the solid state spectra are reported.     

Synthesis and crystal structure of new layered BaNaSc(BO3)2 and BaNaY(BO3)2 orthoborates

Crystals of two new layered BaNaSc(BO₃)₂ (I) and BaNaY(BO₃)₂ (II) orthoborates are grown from the melt-solution by the spontaneous crystallization onto the platinum loop. Single crystal X-ray analysis showed that the compounds are isostructural with the space group R3¯, a=5.23944(12) and 5.3338(2) Å, and c=34.5919(11) and 35.8303(19) Å for I and II, respectively, Z=6. The distinctive feature of the structure is the close-packed composite anion-cation (Ba,Na)(BO₃) layers. The layers are combined into the base building packages of two types: {M³⁺[Ba²⁺(BO₃)³⁻]₂}⁺ and {M³⁺[Na⁺(BO₃)³⁻]₂}⁻, where M is Sc or Y. Neutral-charge two-package (four-layer) blocks are stacked by the rhombohedral principle into twelve layers of the cubic packing.     

Synthesis and characterization of methylpalladium(II) dithiolate complexes of the type [PdMe(SS)(ER3)] (SS = S2CNR 2, S2COEt, S2P(OR)2, S2 PPh2; ER3 = PMePh2, PPh3, AsPh3)

Methylpalladium(II) dithiolate complexes of the type [PdMe(SS)(ER₃] (SS = S₂ CNR₂ (R = Me or Et), S₂COEt, S₂P(OR)₂ (R = Et, ⁿPr, ⁱPr), S₂PPh₂; ER₃ = PMePh₂, PPh₃, AsPh₃) have been synthesized by the reaction of [Pd₂Me₂(μ-Cl)₂(PMePh₂)₂] with sodium/potassium/ammonium salts of the dithio acid or by treatment of [PdMeCl(cod)] with ER₃ followed by sodium/potassium/ammonium salts of the dithio ligand. All the complexes were characterized by elemental analysis, IR and nuclear magnetic resonance (¹H, ³¹P) data.