Simultaneous derivative spectrophotometric determination of thorium and uranium in a micellar medium

Derivative photometric methods for trace analysis of Th(IV) and UO₂(II), and their simultaneous determination in mixtures using 5,8-dihydroxy-1,4-naphthoquinone in a micellar medium are reported. Molar absorptivity and Sandell's sensitivity of 1:2 Th(IV) and 1:1 UO₂(II) complexes at their λ_max, 614.5 nm and 637.0 nm are, 1.19 × 10⁴ 1/mol/cm and 1.12 × 10⁴ 1/mol/cm and 1.95 × 10⁻² μg/cm² and 2.13 × 10⁻² μg/cm² μg/cm², respectively. Calibration graph is linear over the range 9.28 × 10⁻²−18.56 μg/ml of Th(IV) and 9.52 × 10⁻²−19.04 μg/ml of UO₂(II). Though presence of Th(IV) and UO₂(II) causes interference in each others determination, 9.28 × 10⁻¹−9.28 μg/ml Th(IV) and 9.52 × 10⁻¹−9.52 μg/ml UO₂(II) when present together, can be simultaneously determined using derivative spectra.     

Inorganic tin(II) determination by FIA with amperometric detection of its oxinate complex

A highly selective, rapid and direct amperometric method, based on the formation of a complex between tin(II) and 8-hydroxyquinoline (oxine), has been developed for the determination of trace levels of tin(II) using flow injection analysis. Tin(II) electro-oxidation was catalyzed by oxine; its oxidation peak occurred at +0.05 V vs. Ag/AgCl at a glassy carbon electrode in 0.1 mol 1⁻¹ acetate buffer (pH 6). A linear relationship was obtained between the peak current and the tin(II) concentration in the range 0.25-20 μmol 1⁻¹. The detection limit was 0.1 μmol 1⁻¹ and the relative standard deviation calculated by the injection of a 10 μmol 1⁻¹ tin(II) solution was 5% (n = 20). Optimization of several experimental parameters has been carried out and the influence of numerous cations and possible interfering molecules encountered in radiopharmaceuticals and in dental gels has been investigated. The method was applied to the determination of tin(II) in dental gels.     

Use of silica gel chemically modified with zirconium phosphate for preconcentration and determination of lead and copper by flame atomic absorption spectrometry

An analytical method using silica gel chemically modified with zirconium (IV) phosphate for preconcentration of lead and copper, in a column system, and their sequential determination by flame atomic absorption spectrometry (FAAS), was developed. Sample solutions are passed through a glass column packed with 100 mg of the sorbent material, at pH 4.5, and lead and copper are eluted with 1.0 mol l⁻¹ HNO₃ at a flow rate of 2.0 ml min⁻¹. The extraction of copper is affected by Fe(II), Mn(II), Zn(II), Ni(II) and Co(II) while only Fe(II) interferes in the lead determination. These interferences may be overcome with an appropriate addition of a KI or NaF solution. An enrichment factor of 30 was obtained for both metals. While the limits of detection (3σ) were 6.1 and 1.1 μg l⁻¹, for Pb and Cu, respectively, the limits of determination were 16.7 and 3.3 μg l⁻¹. The precision expressed as relative standard deviation (R.S.D.) obtained for 3.3 μg l⁻¹ of Cu and 16.7 μg l⁻¹ of Pb were 4.3 and 4.7%, respectively, calculated from ten measurements. The proposed method was evaluated with reference material and was applied for the determination of lead and copper in industrial and river waters.     

Direct evaluation of meat spoilage and the progress of aging using biosensors

A direct sensing method for monitoring meat quality was developed. The sensor is composed of an Ag/AgCl electrode and a platinum electrode on which putrescine oxidase or xanthine oxidase were immobilized to estimate bacterial spoilage or the progress of aging, respectively. A potential-step chronoamperometric method was applied in which the potential was stepped from 300 mV to 600 mV. A linear relationship was obtained between 5 and 60 nmol g⁻¹ for putrescine (Put) and 0.05 and 1.0 μmol g⁻¹ for hypoxanthine (Hx). The coefficient of variation was 0.75% for 20 nmol ml⁻¹ Put solution and 2.2 for a meat sample using the putrescine sensor, and 1.09% for 0.25 μmol ml⁻¹ Hx solution and 2.6% for a meat sample using the xanthine sensor. The pH requirements and substrate selectivity were suitable for the direct measurement of substrates on the surface of meat. From the results of practical experiments, the direct sensing method was indicated to be useful with some modifications for the estimation of meat quality during aging.     

Reverse flow injection spectrophotometric determination of iron(III) using norfloxacin

A reversed flow injection colorimetric procedure for determining iron(III) at the μg level was proposed. It is based on the reaction between iron(III) with norfloxacin (NRF) in 0.07 mol l⁻¹ ammonium sulfate solution, resulting in an intense yellow complex with a suitable absorption at 435 nm. Optimum conditions for determining iron(III) were investigated by univariate method. The method involved injection of a 150 μl of 0.04% w/v colorimetric reagent solution into a merged streams of sample and/or standard solution containing iron(III) and 0.07 mol l⁻¹ ammonium sulfate in sulfuric acid (pH 3.5) solution which was then passed through a single bead string reactor. Subsequently the absorbance as peak height was monitored at 435 nm. Beer's law obeyed over the range of 0.2–1.4 μg ml⁻¹ iron(III). The method has been applied to the determination of total iron in water samples digested with HNO₃–H₂O₂ (1:9 v/v). Detection limit (3σ) was 0.01 μg ml⁻¹ the sample through of 86 h⁻¹ and the coefficient of variation of 1.77% (n=12) for 1 μg ml⁻¹ Fe(III) were achieved with the recovery of the spiked Fe(III) of 92.6–99.8%.     

Separation of polymer and on-line determination of several antioxidants and UV stabilizers by coupling size-exclusion and normal-phase high-performance liquid chromatography columns

A procedure consisting of connecting in series two different HPLC columns, one for size-exclusion chromatography (SEC) and the second one a normal-phase (silica) column has been developed. An automatic three-way switching valve was placed between the two columns. Through the valve, the polymer was drained whereas the rest of the compounds, a group of antioxidants and UV stabilizers, were separated and analyzed in the second column. The behaviour of the SEC column in different organic phases is studied. Detection limits about 0.1 μg ml⁻¹ were obtained for BHT, Tinuvin 326 and Tinuvin 327; 0.2 μg ml⁻¹ for Irganox 1076, and 1.1 μg ml⁻¹ for Cyasorb UV 9 and Cyasorb UV 1084. R.S.D. values of the whole process are lower than 4%.     

An on-line flow-injection microwave-assisted mineralization and a precipitation/dissolution system for the determination of molybdenum in blood serum and whole blood by electrothermal atomic absorption spectrometry

An on-line flow injection (FI) precipitation–dissolution system with microwave-assisted sample digestion has been developed for the electrothermal atomic absorption spectrometry (ETAAS) determination of trace or ultratrace amounts of molybdenum in human blood serum and whole blood samples. After the exposure of the sample to microwave radiation, the on-line precipitation of molybdenum was achieved by the merging-zone of a 0.5-ml plug of sample with a plug of potassium ferrocyanide, which were carried downstream with a solution of 0.5 mol l⁻¹ of HNO₃. The interfering effects of iron and copper were minimized by the introduction of a flow of a 5% (w/v) sodium potassium tartrate (for iron) and 2% (w/v) of thiourea (for copper and zinc) in a 5% (v/v) ammonia and 2% (v/v) ammonium chloride solution previous to the precipitation reaction. The reddish-brown precipitate of molybdenyl ferrocyanide was collected on the walls of a knotted reactor. The precipitate was dissolved with the introduction of 1 ml of a 3.0 mol l⁻¹ NaOH solution and the best performance in terms of detection limit and precision was achieved when a sub-sample of 140 μl was collected in a capillary of a sampling arm assembly, to introduce 20 μl volumes into the atomizer by means of positive displacement with air through a time-based injector. A detection limit (3σ) of 0.1 μg Mo l⁻¹ using an aqueous standard solution was obtained. The method is quantitative and is applied over the range 0.2–20.0 μg Mo l⁻¹. The precision of the method evaluated by ten replicate analyses of aqueous standard solutions containing 0.5 and 1.0 μg Mo l⁻¹ was 2.8 and 3.1% (relative standard deviation, RSD) (for n=5), respectively. Whereas, the precision evaluated by five replicate analysis of a serum and a whole blood sample were 3.3 and 3.8% RSD. An enrichment factor of ca. 3.5 was achieved with the introduction of 0.5 ml aqueous standard solutions at a sample flow rate of 1.0 ml min⁻¹. Recoveries of spiked molybdenum in blood serum and whole blood were in the ranges 96–102 and 94–98%, respectively. The results obtained for two human whole blood certified reference materials were in good agreement with the indicative values.     

End-column electrochemical detection for inorganic and organic species in high-voltage capillary electrophoresis

The electronics and construction for an end-column ultramicroelectrode (3–10 μm) detection system that permits the use of medium-sized capillaries (25 μm I.D.) without appreciable effects from the potential field at the end of the capillary. Normal peak-to-peak noise over 10 s was 0.01–0.1 pA. The background noise observed for a 200 × μm carbon-fiber electrode placed either 180 μm within a 25-μm capillary or at a point 500 μm away from the capillary was essentially the same. A study of detector response as a function of the position of the electrode has shown that accurate location of the electrode is important for sensitive and reproducible detection. These studies also showed that differences between the density of the electrolyte existing the capillary and the electrolyte in the detection cell could cause anomalous electrode response depending on the location of the electrode relative to the end of the capillary. Application of a carbon fiber or an Hg film electrode gave detection limits (twice the peak-to-peak noise over 10 s) of 2 · 10⁻⁸ mol/l for Pb²⁺, 1 · 10^{− 5} mol/l for NO₂⁻ and 5 · 10⁻¹⁰ mol/l for catechol.     

The acclimative response of the main light-harvesting chlorophyll a/b-protein complex of photosystem II (LHCII) to elevated irradiances at the level of trimeric subunits

The changes in structural organization of the major light-harvesting chlorophyll a/b–protein complex of photosystem II (LHC II) at the level of trimeric subcomplexes were studied in spinach plants grown under low light conditions (50 μmol quanta m⁻² s⁻¹) and then acclimated to elevated irradiances. By monitoring photochemical quenching of fluorescence yield (q_P), photosystem II (PS II) functional status was assessed in leaves of plants acclimated to a range of elevated irradiances. Three separate acclimative irradiances were selected for the experiments, reflecting: limiting light conditions (150 μmol quanta m⁻² s⁻¹), near to the inflexion point on the irradiance curve conditions (300 μmol quanta m⁻² s⁻¹) and an excessive light, causing a moderate stress in the form of down regulation of PS II (450 μmol quanta m⁻² s⁻¹). An immunoblot analysis showed that there was a clear decline in an abundance on chlorophyll basis of Lhcb1-3 apoproteins as an acclimative irradiance increased from 50 to 450 μmol quanta m⁻² s⁻¹, with Lhcb1 decreasing to a lesser extent than Lhcb2 and Lhcb3 (only at excessive irradiance). When analyzed by non-denaturing isoelectric focusing BBY membrane fragments (PSII-enriched, stacked thylakoid membranes) isolated from low light-grown plants were resolved into nine fractions, seven of which (labelled 3–9) were established by us previously [Jackowski and Pielucha, J. Photochem. Photobiol. B: Biol. 64 (2001) 45] to be LHC II subcomplexes representing mixed populations of closely similar trimers, comprising permutations of Lhcb1 and Lhcb2 (subcomplexes 3–7) or Lhcb1-3 (subcomplexes 8 and 9). A heterogeneity with regard to accumulation behaviour of LHC II subcomplexes in response to elevated irradiances was revealed. The subcomplexes 5 and 6 were accumulating at similar level, regardless of the light irradiance experienced. Another group consisting of the subcomplexes 3 and 4 (the most basic ones) showed a progressive increase in relative abundance with increasing an irradiance intensity whereas the subcomplexes 7–9 (the most acidic ones) exhibited a progressive decline in their relative abundance during an acclimation of spinach plants to elevated irradiances thus they may collectively represent an elevated irradiance-responsive subunit of LHCII.     

Simultaneous determination of arsenic, antimony and selenium by gas-phase diode array molecular absorption spectrometry, after preconcentration in a cryogenic trap

This paper describes a method for the simultaneous determination of As(III), Sb(III) and Se(IV) by combining hydride generation and gas phase molecular absorption spectrometry. A system for continuous hydride generation has been designed and developed, based on the use of a double process of gas-liquid separation, and optimal compromise operation conditions for the three compounds have been found. After generation, the hydrides are collected in a liquid nitrogen cryogenic trap, and then evaporated and driven to the flow cell of a diode array spectrophotometer, in which the transient signals over the 190–250 nm wavelength interval are measured. Under the recommended conditions (sample flow: 35 ml min⁻¹, 0.5 M HCl; reductor flow: 4 ml min⁻¹ of 4% NaBH₄, solution) linear response ranges above 50 μg 1⁻¹ for As(III), 30 μg 1⁻¹ for Sb(III) and 200 μg 1⁻¹ for Se(IV) are obtained with detection limits of 22 μg 1⁻¹, 15 μg 1⁻¹ and 65 μg 1⁻¹, respectively. Multiwavelength linear regression equations were used for the simultaneous determination of the three elements in different synthetic samples, with good precision and accuracy and to study simultaneously the interference from different chemical species for the three compounds. Results were similar to those obtained by other techniques using hydride generation.     

Determination of nanomolar concentrations of phosphate in freshwaters using flow injection with luminol chemiluminescence detection

A simple and rapid flow injection (FI) method is reported for the determination of phosphate (as molybdate reactive P) in freshwaters based on luminol chemiluminescence (CL) detection. The molybdophosphoric heteropoly acid formed by phosphate and ammonium molybdate in acidic conditions generated chemiluminescence emission via the oxidation of luminol. The detection limit (3× standard deviation of blank) was 0.03 μg P l⁻¹ (1.0 nM), with a sample throughput of 180 h⁻¹. The calibration graph was linear over the range 0.032–3.26 μg P l⁻¹ (r²=0.9880) with relative standard deviations (n=4) in the range 1.2–4.7%. Interfering cations (Ca(II), Mg(II), Ni(II), Zn(II), Cu(II), Co(II), Fe(II) and Fe(III)) were removed by passing the sample through an in-line iminodiacetate chelating column. Silicate interference (at 5 mg Si l⁻¹) was effectively masked by the addition of tartaric acid and other common anions (Cl⁻, SO₄²⁻, HCO₃⁻, NO₃⁻ and NO₂⁻) did not interfere at their maximum admissible concentrations in freshwaters. The method was applied to freshwater samples and the results (26.1±1.1–62.0±0.4 μg P l⁻¹) were not significantly different (P=0.05) from results obtained using a segmented flow analyser method with spectrophotometric detection (24.4±4.45–84.0±16.0 μg P l⁻¹).     

Voltammetric determination of volatile free sulfide and alkylthiols as contaminants in parenteral amino acid solutions

A method for the simultaneous voltammetric determination of free sulfide and volatile alkythiols (methanethiol/ethanethiol) existing as contaminant in parenteral nutrition (PN) solutions was developed. The volatile sulfides (dihydrogensulfide and alkylthiols) formed in the formulations were distilled over 45 min at 47°C in a purpose-made Conway cell. The analytes were quantified by differential pulse cathodic stripping voltametry (DPCSV) at the hanging mercury-drop electrode and determined, simultaneously as dihydrogensulfide and alkylthiols using a 60 s preconcentration time at −300 mV (versus Ag/AgCl, Cl⁻ 3.0 mol l⁻¹). The voltammetric signals were directly linear proportional to the sulfides concentrations in the PN solutions in the range 3–20 μmol l⁻¹ and detection limits of about 2 μmol l⁻¹ were calculated. Recoveries of sulfides from PN solutions in the range 90–110% were calculated using the method and nine commercial PN formulations were analyzed. Methanethiol and ethanethiol were quantified from their composite signals, and the mutual influence of the analytes on the DPCSV measurements is discussed.     

The determination of molybdenum in water and biological samples by graphite furnace atomic spectrometry after polyurethane foam column separation and preconcentration

A system for molybdenum separation and enrichment aiming its determination in water and biological samples by graphite furnace atomic absorption spectrometry (GFAAS) is proposed. The procedure is based on the sorption of the molybdenum (VI) thiocyanate complex onto a mini-column packed with polyurethane foam (PUF). The elution is accomplished by a 3.0 mol l⁻¹ nitric acid solution. Flow variables were optimized and an enrichment factor of 10 as well as a limit of detection (LOD) (3 s) of 0.08 μg l⁻¹ in the sample solution were achieved. The coefficient of variation showed values of 3 and 2% for molybdenum solutions of 2.0 and 10.0 μg l⁻¹, respectively. The accuracy of the method was confirmed by the good concordance between found and certified values in the analysis of certified reference materials (CRMs) (CASS-3 Nearshore Seawater, NIST 1547 Peach Leaves, NIST 1515 Apple Leaves and NIST 1572 Citrus Leaves). The procedure was also applied for the molybdenum determination in mineral waters as well as in produced water samples. The results obtained for the mineral water samples compared well with those obtained by ICP-MS. Concerning the produced water samples, in spite of their large salinity, recoveries of 90 to 120% at the 1 μg l⁻¹ were observed.     

Mechanistic study and kinetic determination of vitamin C employing the sequential injection technique

For the first time, the robust sequential injection (SI) technique has been employed for full kinetic investigation of the oxidation reaction of vitamin C. Iron(III) in sulphuric acid media was used as an oxidant and 1,10-phenanthroline as an indicator and the resulting solution of tris 1,10-phenanthroline-iron(II) complex was monitored spectrophotometrically at 510 nm. The reaction orders with respect to each reagent were determined by the SI-technique and were found to be 1, 1, and −1 for vitamin C, iron(III) and hydrogen ions respectively. On the basis of these values a rate law was developed and a plausible mechanism was established. A kinetic method for the analysis of vitamin C in drug formulations based on the results obtained above was thus validated. The drug in the range 20–300 ppm was determined by the kinetic method using 1.6×10⁻³ mol dm⁻³ ammonium ferric sulphate in 0.02 mol dm⁻³ sulphuric acid with the aspiration volume of 944 μl and the fixed-time of 180 s. The results thus obtained by the SI-kinetic method were statistically compared with those obtained by the British Pharmacoebia standard method and found to be accurate, precise and fast.     

Flow injection hydride generation electrothermal atomic absorption spectrometric determination of toxicologically relevant arsenic in urine

Analytical procedure for the determination of toxicologically relevant arsenic (the sum of arsenite, arsenate, monomethylarsonate and dimethylarsinate) in urine by flow injection hydride generation and collection of generated inorganic and methylated hydrides on an integrated platform of a transverse-heated graphite atomizer for electrothermal atomic absorption spectrometric determination (ETAAS) is elaborated. Platforms are pre-treated with 2.7 μmol of zirconium and then with 0.10 μmol of iridium which serve both as an efficient hydride sequestration medium and permanent chemical modifier. Arsine, monomethylarsine and dimethylarsine are generated from diluted urine samples (10–25-fold) in the presence of 50 mmol L⁻¹ hydrochloric acid and 70 mmol L⁻¹ l-cysteine. Collection, pyrolysis and atomization temperatures are 450, 500, 2100 and 2150 °C, respectively. The characteristic mass, characteristic concentration and limit of detection (3σ) are 39 pg, 0.078 μg L⁻¹ and 0.038 μg L⁻¹ As, respectively. The limits of detection in urine are ca. 0.4 and 1 μg L⁻¹ with 10- and 25-fold dilutions. The sample throughput rate is 25 h⁻¹. Applications to several urine CRMs are given.     

Enhancement of the chemiluminescence of penicillamine and ephedrine after derivatization with aldehydes using tris(bipyridyl)ruthenium(II) peroxydisulfate system and its analytical application

A novel sequential injection (SI) method was developed for the determination of penicillamine (PA) and ephedrine (EP) based on the reaction of these drugs with tris(bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) and peroxydisulfate (S₂O₈²⁻) in the presence of light. Derivatization of PA and EP with aldehydes has resulted in a significant enhancement of the chemiluminescence emission signal by at least 25 times for PA and 12 times for EP, leading to better sensitivities and lower detection limits for both drugs. The instrumental setup utilized a syringe pump and a multiposition valve to aspirate the reagents, (Ru(bpy)₃²⁺ and S₂O₈²⁻), and a peristaltic pump to propel the sample. The experimental conditions affecting the derivatization reaction and the chemiluminescence reaction were systematically optimized using the univariate approach. Under the optimum conditions linear calibration curves between 0.2–24 μg mL⁻¹ for PA and 0.2–20 μg mL⁻¹ for EP were obtained. The detection limits were 0.1 μg mL⁻¹ for PA and 0.03 μg mL⁻¹ for EP. The procedure was applied to the analysis of PA and EP in pharmaceutical products and was found to be free from interferences from concomitants usually present in these preparations.     

On-line extraction-spectrophotometric determination of neostigmine in pharmaceuticals using double membrane phase separator and monovalent dyestuff

A simple, sensitive and rapid spectrophotometric method for the determination of neostigmine by flow injection analysis (FIA) coupled with an ion associate extraction has been developed. The three-line manifold was assembled. Neostigmine(200 μl) was injected into a distilled water stream and the pH was adjusted to 10 with a borate–phosphate buffer solution. Then, the stream was mixed with the ion-pairing tetrabromophenolphthalein ethylester (TBPEH)-1,2-dichloroethane solution. After phase separation with a double membrane phase separator, absorbance was measured at 610 nm. A linear calibration graph was obtained between 1×10⁻⁷ mol l⁻¹ and 5×10⁻⁷ mol l⁻¹ of neostigmine. Up to 48 samples h⁻¹ could be processed with a relative standard deviation (R.S.D.) of 0.5% (n=5) for 4×10⁻⁷ mol l⁻¹ neostigmine. The proposed system was applied to the simple, reproducible and rapid determination of neostigmine in commercial pharmaceuticals.     

Evaluation of ammonia as diluent for serum sample preparation and determination of selenium by graphite furnace atomic absorption spectrometry

A method for the determination of total selenium in serum samples by graphite furnace atomic absorption spectrometry was evaluated. The method involved direct introduction of 1:5 diluted serum samples (1% v/v NH₄OH+0.05% w/v Triton X-100^®) into transversely heated graphite tubes, and the use of 10 μg Pd+3 μg Mg(NO₃)₂ as chemical modifier. Optimization of the modifier mass and the atomization temperature was conducted by simultaneously varying such parameters and evaluating both the integrated absorbance and the peak height/peak area ratio. The latter allowed the selection of compromise conditions rendering good sensitivity and adequate analyte peak profiles. A characteristic mass of 49 pg and a detection limit (3s) of 6 μg 1⁻¹ Se, corresponding to 30 μg l⁻¹ Se in the serum sample, were obtained. The analyte addition technique was used for calibration. The accuracy was assessed by the determination of total selenium in Seronorm™ Trace Elements Serum Batch 116 (Nycomed Pharma AS). The method was applied for the determination of total selenium in ten serum samples taken from individuals with no known physical affection. The selenium concentration ranged between 79 and 147 μg l⁻¹, with a mean value of 114±22 μg l⁻¹.     

Chromium speciation using activated alumina microcolumns and sequential injection analysis-flame atomic absorption spectrometry

A new procedure has been developed for chromium speciation in water by sequential injection analysis and flame atomic absorption spectrometry. The method involves the online retention of Cr(VI) anionic species and Cr(III) cationic species on alumina microcolumns, prepared by packing activated alumina in polytetrafluoroethylene tubes, followed by selective elution of Cr(VI) with 2 mol l⁻¹ NH₄OH and of Cr(III) with 0.2 mol l⁻¹ HNO₃. Studies were carried out on the effect of retention and elution conditions for both Cr species. The limit of detection values, established as the concentration corresponding to three times the standard deviation of blank measurements divided by the slope of the calibration line, achieved were 42 μg l⁻¹ for Cr(VI) and 81 μg l⁻¹ for Cr(III). The relative standard deviation of three independent determination of natural spiked samples were lower than 10% for concentration levels between 0.5 and 2 mg l⁻¹ of Cr. The developed procedure was applied to the analysis of two effluent sewage waters, and results obtained compared well with those obtained by a batch procedure. Recovery studies on natural spiked samples provided results between 93 and 103% for Cr(VI) and from 100 to 106% for Cr(III) for samples spiked with single species. For samples spiked with both Cr(VI) and Cr(III), the average recoveries varied from 86 to 101% for Cr(VI) and from 91 to 117% for Cr(III).     

Targeting of the tumor microcirculation by photodynamic therapy with a synthetic porphycene

9-acetoxy-2,7,12,17-tetrakis-(β-methoxyethyl)-porphycene (ATMPn) is a chemically pure substance with fast pharmacokinetics and superior photodynamic properties in vitro as compared to Photofrin®. In this study the pharmacokinetics, photodynamic efficacy and tissue localization of ATMPn were investigated in vivo.

Amelanotic melanomas (A-Mel-3) were implanted in dorsal skin fold chambers fitted to Syrian Golden hamsters. Fluorescence kinetics of ATMPn (1.4 μmol kg⁻¹ b.w.i.v; n = 8) were monitored by intravital microscopy. Quantitative measurements of fluorescence intensity were carried out by digital image analysis. For tumor growth studies 1.4 μmol kg⁻¹ was injected 24 h (n = 3), 3 h (n = 3), 1 min (n = 6) and 2.8 μmol kg⁻¹ 1 min (n = 6) before PDT (Laser (630 nm) or lamp (600–750 nm), 100 mW cm⁻², 100 J cm⁻²). Tumor volume was measured for 28 d. Solid tumors (n = 3) were excised 1 min after injection of ATMPn (2.8 μmol kg⁻¹) and cryostat sections (20 mm) were analyzed by confocal laser scanning microscopy (CLSM) for tissue localization of the dye.

Maximal fluorescence (mean ± S.E.) arose in the tumor (94 ± 7%) and surrounding host tissue (67 ± 5%) 30 s post injection followed by a rapid decrease. Hardly any fluorescence was detectable 12 h after administration. Only PDT 1 min after injection of ATMPn was effective yielding 3/6 complete remissions (2.8 mmol kg⁻¹, laser) and 6/6 complete remissions (2.8 μmol kg⁻¹, lamp), respectively. One minute after injection the dye is primarily localized in the vascular wall of normal and tumor vessels as shown by CLSM.

PDT at a time, when the dye is localized primarily in the tumor microcirculation, exhibits the best tumor killing effects showing that vascular targeting is effective in treating solid malignant tumors. ATMPn in liposomes makes administration and light irradiation in one session possible due to its fast pharmacokinetics. Thus, using ATMPn as a photosensitizer may provide more flexibility to perform PDT after surgical exploration and debulking as adjuvant therapy.