Membrane‐Anchoring Photosensitizer with Aggregation‐Induced Emission Characteristics for Combating Multidrug‐Resistant Bacteria

Traditional photosensitizers (PSs) show reduced singlet oxygen (¹O₂) production and quenched fluorescence upon aggregation in aqueous media, which greatly affect their efficiency in photodynamic therapy (PDT). Meanwhile, non‐targeting PSs generally yield low efficiency in antibacterial performance due to their short lifetimes and small effective working radii. Herein, a water‐dispersible membrane anchor (TBD‐anchor) PS with aggregation‐induced emission is designed and synthesized to generate ¹O₂ on the bacterial membrane. TBD‐anchor showed efficient antibacterial performance towards both Gram‐negative (Escherichia coli) and Gram‐positive bacteria (Staphylococcus aureus). Over 99.8 % killing efficiency was obtained for methicillin‐resistant S. aureus (MRSA) when they were exposed to 0.8 μm of TBD‐anchor at a low white light dose (25 mW cm^?2) for 10 minutes. TBD‐anchor thus shows great promise as an effective antimicrobial agent to combat the menace of multidrug‐resistant bacteria.     

Antimicrobial Photodynamic Efficiency of Novel Cationic Porphyrins towards Periodontal Gram‐positive and Gram‐negative Pathogenic Bacteria

The Gram‐negative Aggregatibacter actinomycetemcomitans and Fusobacterium nucleatum are major causative agents of aggressive periodontal disease. Due to increase in the number of antibiotic‐resistant bacteria, antimicrobial Photodynamic therapy (aPDT) seems to be a plausible alternative. In this work, photosensitization was performed on Gram‐positive and Gram‐negative bacteria in pure culture using new‐age cationic porphyrins, namely mesoimidazolium‐substituted porphyrin derivative ( ImP ) and pyridinium‐substituted porphyrin derivative ( PyP ). The photophysical properties of both the sensitizers including absorption, fluorescence emission, quantum yields of the triplet excited states and singlet oxygen generation efficiencies were evaluated in the context of aPDT application. The studied porphyrins exhibited high ability to accumulate into bacterial cells with complete penetration into early stage biofilms. As compared with ImP, PyP was found to be more effective for photoinactivation of bacterial strains associated with periodontitis, without any signs of dark toxicity, owing to its high photocytotoxicity.     

Di‐N‐Methylation of Anti‐Gram‐Positive Aminoglycoside‐Derived Membrane Disruptors Improves Antimicrobial Potency and Broadens Spectrum to Gram‐Negative Bacteria

The effect of di‐N‐methylation of bacterial membrane disruptors derived from aminoglycosides (AGs) on antimicrobial activity is reported. Di‐N‐methylation of cationic amphiphiles derived from several diversely structured AGs resulted in a significant increase in hydrophobicity compared to the parent compounds that improved their interactions with membrane lipids. The modification led to an enhancement in antibacterial activity and a broader antimicrobial spectrum. While the parent compounds were either modestly active or inactive against Gram‐negative pathogens, the corresponding di‐N‐methylated compounds were potent against the tested Gram‐negative as well as Gram‐positive bacterial strains. The reported modification offers a robust strategy for the development of broad‐spectrum membrane‐disrupting antibiotics for topical use.     

Phosphosulfonic acid‐catalyzed green synthesis and bioassay of α‐aryl‐α′‐1,3,4‐thiadiazolyl aminophosphonates

A series of new α‐aminophosphonates containing 1,3,4‐thiadiazole moiety (4a–l) were synthesized via a simple, efficient, and one‐pot three‐component Kabachnik–Fields reaction of 2‐amino‐5‐ethyl‐1,3,4‐thiadiazole with various aryl/heteroaryl aldehydes and diethylphosphite under solvent‐free microwave irradiation conditions using phosphosulfonic acid, as a reusable and heterogeneous solid acid catalyst. All the title compounds were screened for radical scavenging activity by DPPH and H₂O₂ methods, and antimicrobial activity against bacteria (Gram‐positive and Gram‐negative) and fungi using the disc diffusion technique. They exhibited potent in vitro antioxidant and moderate antimicrobial activity.     

4‐Quinolone Derivatives and Their Activities Against Gram‐negative Pathogens

Gram‐negative pathogens represent a significant global health threat, while the emergency and widespread of drug resistance make the situation even worse. As “privileged building blocks,” 4‐quinolones including fluoroquinolones are mainstays of chemotherapy against various bacterial infections. However, as other antibiotics, the resistance of Gram‐negative bacteria to 4‐quinolones develops rapidly and spreads widely throughout the world. To overcome the resistance and improve the potency, a number of 4‐quinolone derivatives were designed, synthesized, and screened for their in vitro and in vivo activities against representative Gram‐negative pathogens. This review aims to summarize the recent advances made towards the discovery of 4‐quinolone derivatives as anti‐Gram‐negative agents as well as their structure–activity relationship. The enriched structure–activity relationship paves the way to the further rational development of 4‐quinolones with excellent potency against both drug‐susceptible and drug‐resistant Gram‐negative pathogens.     

Cationic Poly([R]‐3‐hydroxybutyrate) Copolymers as Antimicrobial Agents

Poly([R]‐3‐hydroxybutyrate) (PHB), a natural biodegradable polyester, has attracted much attention as a new biomaterial because of its sustainability and good biocompatibility. In this study, it is discovered that PHB can be conveniently functionalized to obtain a number of platform chain architectures that may provide a wide range of functional copolymers. In a transesterification reaction, linear (di‐hydroxylated) and star shaped (tri‐ and tetra‐hydroxylated) PHB oligomers are synthesized, followed by copolymerization with 2‐(dimethylamino)ethyl methacrylate and quaternization with benzyl bromide to afford antimicrobial properties. The antimicrobial activities of the quaternary salts against clinically relevant pathogens on the interactions with outer and cytoplasmic membranes, lethal mechanisms, multipassage resistance, and synergy effect with antibiotics are investigated. Cationic PHB copolymers show effectiveness as antimicrobial agents, with minimum inhibitory concentration values 0.24–0.65 µm (or µmol dm^?3) (or 32–128 µg mL^?1) against Gram‐positive and Gram‐negative bacteria. Modifying the copolymer architectures into star shapes results in enhanced effectiveness to disrupt the membrane integrity. Synergistic effects are attained for all the quaternized PHB derivatives when they are used together with tobramycin. Multipassage resistance does not occur in both the linear and star derivatives against Gram‐negative bacteria after 20 passages.     

TiO2 nanoparticles/poly(butylene adipate‐co‐terephthalate) bionanocomposite films for packaging applications

In this present study, biodegradable PBAT nanocomposites containing different weight percentages (1, 3, 5, 7, and 10% w/w) of TiO₂ nanoparticles were prepared by using solvent casting technique, chloroform as a solvent. The microstructure and morphology of the as‐synthesized poly(butylene adipate‐co‐terephthalate) (PBAT)/TiO₂ nanocomposite films were characterized by Fourier‐transform infrared, X‐ray diffraction, scanning electron microscopy, and transmission electron microscope. The thermal degradation of PBAT composites was studied by using thermogravimetric analysis. The mechanical strength of the films was improved by increasing TiO₂ concentration. Tensile strength increased from 32.60 to 63.26 MPa, respectively. Barrier properties of the PBAT/TiO₂ nanocomposites were investigated by using an oxygen permeability tester. The oxygen permeability (oxygen transmission rate) decreased with increasing the TiO₂ nanoparticle concentrations. The PBAT/TiO₂ nanocomposite films showed profound antimicrobial activity against both Gram‐positive and Gram‐negative foodborne pathogenic bacteria, namely, Escherichia coli and Staphylococcus aureus, to understand to the zone of inhibition. These results indicated that filler–polymer interaction is important and the role of the TiO₂ as a reinforcement in the nanocomposites was evident. Copyright © 2017 John Wiley & Sons, Ltd.     

Synthesis of novel 2,3‐disubstituted quinazolin‐4(3H)‐one derivatives containing hydrazone skeleton as potent urease inhibitors and their antimicrobial activities

A new series of quinazolinones containing hydrazone moiety were synthesized, and their inhibitory activities on urease were assessed in vitro. Most of the compounds exhibited potent urease inhibitory activity. Among the synthesized compounds, molecule 4a bearing furan ring has the best inhibitory effect against urease with IC₅₀ = 2.90 ± 0.11 μg/mL. Compounds 4f , 4g , 4h , 4i , and 4j have hydroxy group on phenyl ring. Compound 4i is the most active inhibitor among these compounds with IC₅₀ = 5.01 ± 0.10 μg/mL, which has 3‐Cl and 4‐Br on phenyl ring. Also, newly synthesized compounds had been tested for their antimicrobial effects against three of Gram‐positive bacteria (Bacillus cereus 702 Roma, Staphylococcus aureus ATCC 25923, and Streptococcus pyogenes ATCC 19615) and three of Gram‐negative bacteria (Escherichia coli ATCC 25922, Proteus vulgaris ATCC 13315, and Pseudomonas aeruginosa ATCC 27853). Antimicrobial activity results show that compounds 4a , 4h , 4j , 4f , and 4l have the lowest minimum inhibitory concentration (MIC) value of 1000 μg/mL to all tested bacteria. The other compounds have the MIC value of >1000 μg/mL to all tested bacteria.     

Antimicrobial polymers containing melamine derivatives. II. Biocidal polymers derived from 2‐vinyl‐4,6‐diamino‐1,3,5‐triazine

Poly(2‐vinyl‐4,6‐diamino‐1,3,5‐triazine) (PVDAT) and a series of poly(styrene‐co‐2‐vinyl‐4,6‐diamino‐1,3,5‐triazine) (PS‐co‐VDAT) copolymers were synthesized via conventional free‐radical polymerizations. The polymer structures were confirmed by Fourier transform infrared, NMR, and elemental analysis. The molecular weights were determined by gel permeation chromatography studies, and the thermal properties were characterized by differential scanning calorimetry and thermogravimetric analysis. After treatment with chlorine bleach, PVDAT and PS‐co‐VDAT provided potent antimicrobial functions against multidrug‐resistant Gram‐negative and Gram‐positive bacteria. The antimicrobial functions were durable for longer than 3 months and rechargeable for more than 50 times. The structure–property relationship of the polymers was further discussed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4089–4098, 2005     

Synthesis,Voltammetric and Analytical Applications of Some Fluorine Substituted Spirosteroidalthiazolidin‐4‐one Derivatives of Sulfa Drugs

A new 5‐arylidene‐4‐oxo‐(sulfonamoyl phenyl)‐spiro[thiazolidinone‐2,2′‐steroids] series (7–10) was prepared by condensation of sulfanilamide, sulfapyridine and sulfadiazine sulfa drugs with testosterone, epiandrosterone and progesterone steroids, respectively. The resultant imino derivatives 1–3 upon cycloaddition with thioacetic acid in dry 1,4‐dioxane afforded 3‐sulfo‐namoylphenylspiro[4‐oxo‐thiazolidin‐2,2′steroids] (4–6). The latter compounds (4–6) upon condensation with p‐fluorobenzaldehyde in ethanol‐piperidine yielded the corresponding 4‐fluoroarylidene derivatives 7, 8 & 9, respectively. All the newly synthesized compounds were confirmed by UV, IR, ¹H NMR, ¹³C NMR, mass spectral data, elemental analysis and molecular weight determination. In vitro antimicrobial screening of some of the synthesized compounds showed good antimicrobial activities towards some pathogenic Gram‐positive, Gram‐negative bacteria and fungi vs. piperacillin and mycostatine antibiotics as standard antibacterial and antifungal agents, respectively. The voltammetric behavior of two newly spirothiazolidinone steroids ( 2a & 5a ) was critically studied. Compound 5a physically immobilized polyurethane foam solid sorbent was successfully used for removal and/or separation of bismuth(III) from water.     

Preparation and antimicrobial properties of LL‐37 peptide immobilized lignin/caprolactone polymer film

The use of biopolymers has gained priority in tissue engineering and biotechnology, both as dressing material and for enhancing treatment efficiency. There is a demand for new biopolymers designed with protease inhibitors and antimicrobials. LL‐37 is an important antimicrobial peptide in human skin and exhibits a broad spectrum of antimicrobial activity against bacteria, fungi, and viral pathogens. Using lignin which is an abundant carbohydrate polymer in nature and a polyacrylic acid, we prepared a lignin/caprolactone biodegradable film by plastifying caprolactone and polyacyrlic acid. Lignin/caprolactone biodegradable film was activated with CDI and then immobilized LL‐37 peptide. The structure was elucidated in terms of its functional groups by attenuated total reflectance‐fourier transform infrared spectroscopy (ATR‐FTIR), and the morphology of the lignin/caprolactone biodegradable film was characterized by scanning electron microscopy (SEM) before and after the immobilization process. The amount of LL‐37 immobilized was determined by ELISA method. It was found that 97% of LL‐37 peptide was successfully immobilized onto the lignin/caprolactone biodegradable film. Antimicrobial activity was determined in the lignin/caprolactone biodegradable film samples by quantitative antimicrobial activity method. According to the results, LL‐37 immobilized lignin/caprolactone biodegradable film samples were effective on test organisms; Gram‐positive Staphylococcus aureus and Gram‐negative Escherichia coli. In bio‐compatibility assays, the ability to support tissue cell integration was detected by using 3 T3 mouse fibroblasts. Samples were examined under transverse microscope, non‐immobilized sample showed a huge cellular death, whereas LL‐37 immobilized lignin/caprolactone biodegradable film had identical cellular growth with the control group. This dual functional lignin/caprolactone biodegradable film with enhanced antibacterial properties and increased tissue cell compatibility may be used to design new materials for various types of biological applications.     

Efficient Synthesis of Novel 3‐Phenyl‐5‐thioxo‐3,4,5,6‐tetrahydroimidazo[4,5‐c]pyrazole‐2(1H)‐carbothioamide Derivatives Using a CeO2–MgO Catalyst and Evaluation of Antimicrobial Activity

Imidazo[4,5‐c ]pyrazole derivatives ( 3a–f , 4a–f , and 5a–f ) were efficiently synthesized by one‐pot three‐component reactions using CeO₂–MgO as the catalyst. The synthesized compounds were characterized by IR, ¹H NMR, ¹³C NMR, and mass spectroscopic analyses. The in vitro antimicrobial activity of the synthesized compounds against various bacterial and fungal strains was screened. Compound 3b was highly active [minimum inhibitory concentration (MIC): 0.5 μg/mL] against Gram‐positive Staphylococcus aureus , and compounds 3b , 3f , 4d , and 4e were highly active (MIC: 0.5, 2, 2, and 0.5 μg/mL, respectively) against Gram‐negative Pseudomonas aeruginosa and Klebsiella pneumoniae , relative to standard ciprofloxacin in the antibacterial activity screening. Compounds 3b and 4f were highly active (MIC: 4 and 0.5 μg/mL, respectively) against Aspergillus fumigatus and Microsporum audouinii in the antifungal activity screening compared with the clotrimazole standard.     

Silver(I)‐N‐heterocyclic carbene complexes of bis‐imidazol‐2‐ylidenes having different aromatic‐spacers: synthesis,crystal structure,and in vitro antimicrobial and anticancer studies

A series of Ag(I) complexes ( 6 , 7 , 8 , 9 ) derived from imidazol‐2‐ylidenes was synthesized by reacting Ag₂O with an o‐, m‐, p‐xylyl or 1,3,5‐triazine‐linked imidazolium salts ( 1 , 2 , 3 , 4 ) and then characterizing these using various spectro‐analytical techniques. Additionally, triazine‐linked bis‐imidazolium salt 5 was characterized using the single‐crystal X‐ray diffraction method. Complexes 6–9 were formed from the N‐heterocyclic carbene ligand precursors 1–3 as PF₆^‐ salts in good yields. Conversely, salt 5 does not form Ag(I) complex even under various reaction conditions. Using ampicillin as a standard, complexes 6–9 were tested against bacteria strains Escherichia coli and Staphylococcus aureus as Gram‐negative and Gram‐positive bacteria, respectively, showing potent antimicrobial activities against the tested bacteria even at minimum inhibition concentration and bacterial concentration levels. Furthermore, the potential anticancer activities of the reported complexes were evaluated against the human colorectal cancer (HCT 116) cell lines, using 5‐fluorouracil as a standard drug. The highest anticancer activities were observed for complex 8 with an IC₅₀ value of 3.4 μm , whereas the lowest was observed for complex 9 with an IC₅₀ value of 18.1 μm . Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation,antimicrobial activity,and toxicity of 2‐amino‐4‐arylthiazole derivatives

Seven 2‐amino‐4‐aryl‐1,3‐thiazoles ( 1a–g ) and their corresponding 2‐aminoacetyl ( 2a–g ) and 2‐aminoacetyl‐5‐bromo ( 3a–g ) derivatives were synthesized and tested in vitro against 11 reference strains, three Gram‐positive and four Gram‐negative bacteria, two yeasts, and two moulds. Toxicity of the compounds was also evaluated using the brine shrimp test. Compounds 1a, 1b, 1e–g , and 3b showed moderate antimicrobial activity at different concentrations. The results indicated that acetylation of the amino group and bromination at position 5 of the thiazole moiety cause lost of activity. Compounds 1a, 1e , and 1f showed toxicity to brine shrimp nauplii below 10 ppm. Most other compounds showed moderate toxicity, LD₅₀ above 100 ppm. Structures of all compounds were confirmed by NMR and MS data. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:254–260, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20182     

Multiplex identification of sepsis‐causing Gram‐negative pathogens from the plasma of infected blood

Early and accurate detection of bacterial pathogens in the blood is the most crucial step for sepsis management. Gram‐negative bacteria are the most common organisms causing severe sepsis and responsible for high morbidity and mortality. We aimed to develop a method for rapid multiplex identification of clinically important Gram‐negative pathogens and also validated whether our system can identify Gram‐negative pathogens with the cell‐free plasm DNA from infected blood. We designed five MLPA probe sets targeting the genes specific to major Gram‐negative pathogens (uidA and lacY for E. coli, ompA for A. baumannii, phoE for K. pneumoniae, and ecfX for P. aeruginosa) and one set targeting the CTX‐M group 1 to identify the ESBL producing Gram‐negative pathogens. All six target‐specific peaks were clearly separated without any non‐specific peaks in a multiplex reaction condition. The minimum detection limit was 100 fg of pathogen DNA. When we tested 28 Gram‐negative clinical isolates, all of them were successfully identified without any non‐specific peaks. To evaluate the clinical applicability, we tested seven blood samples from febrile patients. Three blood culture positive cases showed E. coli specific peaks, while no peak was detected in the other four culture negative samples. This technology can be useful for detection of major sepsis‐causing, drug‐resistant Gram‐negative pathogens and also the major ESBL producing Gram‐negatives from the blood of sepsis patients in a clinical setting. This system can help early initiation of effective antimicrobial treatment against Gram‐negative pathogens for sepsis patients, which is very crucial for better treatment outcomes.     

Synthesis and antibacterial activity of surface‐coated catechol‐conjugated polymer with silver nanoparticles on versatile substrate

In the present study, 2‐chloro‐3′,4′‐dihydroxyacetophenone (CCDP), a catechol derivative, was quaternized with poly(propylene oxide)‐g‐poly(dimethylaminoethyl methacrylate) (PPO‐g‐PDMA, PgP) to prepare surface coatings for various substrates. The surfaces of noble metals, oxides, and synthetic polymers were coated by immersion in an aqueous solution of CCDP quaternized with PgP (C‐PgP). The catechol functional groups that remained on the surface were used for deposition of Ag nanoparticles (AgNPs) on the coated surface, to provide a water‐resistant antibacterial polymer with long‐term antimicrobial activity. X‐ray photoelectron spectroscopy confirmed deposition of C‐PgP and AgNPs on the surface coated with the antibacterial polymer. Surface‐immobilized C‐PgP/AgNPs showed outstanding antibacterial activities against Staphylococcus aureus, a Gram‐positive bacterium, and Escherichia coli, a Gram‐negative bacterium. C‐PgP/AgNPs can be applied to a variety of substrates and can therefore be used as antibacterial materials in various fields. Copyright © 2016 John Wiley & Sons, Ltd.     

Antimicrobial anilinium polymers: The properties of poly(N,N‐dimethylaminophenylene methacrylamide) in solution and as coatings

Antimicrobial polymers have been widely reported to exert strong biocidal effects against bacteria. In contrast with antimicrobial polymers with aliphatic ammonium groups, polymers with anilinium groups have been rarely studied and applied as biocidal materials. In this study, a representative polymer with aniline side functional groups, poly(N,N‐dimethylaminophenylene methacrylamide) (PDMAPMA), was explored as a novel antimicrobial polymer. PDMAPMA was synthesized and its physicochemical properties evaluated. The methyl iodide‐quaternized polymer was tested against the Gram‐positive Staphylococcus aureus, with a minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of 16–32 and 64–128 μg mL^?1, respectively. Against the Gram‐negative Escherichia coli, the MIC and MBC were both 64–128 μg mL^?1. To broaden the range of applications, PDMAPMA was coated on substrates via crosslinking to endow the surface with contact‐kill functionality. The effect of charge density of the coatings on the antimicrobial behavior was then investigated, and stronger biocidal performance was observed for films with higher charge density. This study of the biocidal behavior of PDMAPMA both in solution and as coatings is expected to broaden the application of polymers containing aniline side groups and provide more information on the antimicrobial behavior of such materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1908–1921     

Highly Efficient One‐Pot Three‐Component Synthesis and Antimicrobial Activity of 2‐Amino‐4H‐chromene Derivatives

A remarkably efficient three‐component reaction to synthesize 2‐amino‐4H‐chromenes derivatives from malononitrile, various aromatic aldehydes, and orcinol was described at room temperature in CH₂Cl₂ in the presence of catalytic amount of triethylamine. In a facile one‐pot procedure, excellent yields of products were achieved in less than 1 h. Some of the synthesized 2‐amino‐4H‐chromenes derivatives demonstrated potent antibacterial activities against Gram‐positive bacteria including Staphylococcus aureus and Bacillus anthracis, indicated by disk method, minimum inhibitory concentration, and minimum bactericidal concentration approaches. However, none of the tested compounds expressed any antibacterial activities against Enterococcus faecalis and Gram‐negative bacteria.     

Synthesis and antimicrobial evaluation of new 1‐{[4‐(4‐Halogenophenyl)‐4H‐1,2,4‐ triazol‐3‐yl]sulfanyl}acetyl‐4‐substituted thiosemicarbazides and products of their cyclization

By the reaction of hydrazides of 4‐(4‐halogenophenyl)‐4H‐1,2,4‐triazol‐3‐yl‐sulfanyl acetic acid with isothiocyanate, 1‐acyl‐4‐substituted thiosemicarbazide derivatives ( 7–19 ) were obtained. The cyclization of compounds ( 7–19 ) in the presence of 2% NaOH led to the formation of compounds ( 20–26 ) containing two 1,2,4‐triazole rings connected by a methylenesulfanyl group. The new compounds were tested for their in vitro antimicrobial activity. Some of the tested compounds ( 9, 12, 18, 21, 22 ) showed activity against the reference strains of Gram‐positive bacteria with the MIC (minimal inhibitory concentration) = 125 to >1000 μg/mL. © 2011 Wiley Periodicals, Inc. Heteroatom Chem 23:117–121, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20758