SPECTROPHOTOMETRIC STUDY OF COMPLEX FORMATION BETWEEN SOME ALKALI AND ALKALINE EARTH CATIONS AND SEVERAL CONVENTIONAL (N,N), (N,O) AND (O,O) LIGANDS IN 95% ETHANOL

Abstract

The complexation of Li⁺, Na⁺, Mg²⁺ and Ca²⁺ with 1,10-phenanthroline, 2,2′-bipyridine, 1,2-phenylenediamine, 2-aminopyridine, 8-hydroxyquinoline, catechol and ethylene glycol was studied in 95% ethanol by means of a competitive spectrophotometric method using murexide as indicator. Formation constants of 1:1 conplexes were determined. In the case of all ligands used, the stability of the complexes was found to vary in the order Mg²⁺ > Ca²⁺ > Li⁺ > Na⁺. It was found that the structure influences the formation and stability of resulting complexes. Effects of various parameters on complexation are discussed.     

Ternary complexes of copper(II), nickel(II) and zinc(II) with nitrilotriacetic acid as a primary ligand and some phenolic acids as secondary ligands

Summary The formation of ternary complexes of the MAL^3– type [where M = Cu^II, Ni^II and Zn^II ; A = nitrilotriacetic acid (NTA); L = 1-hydroxy-2-naphthoic acid (1,2 HNA) and 2-hydroxy-1-naphthoic acid (2,1 HNA)] have been studied potentiometrically in 50% v/v aqueous — ethanol (25° and µ = 0.1). Under identical conditions the binary complexes of the 1,2- and 2,1-HNA ligands have also been examined. The values of mixed ligand formation constants K_MAL have been found to be lower than K_ML (first step formation constant of binary complexes) and even less than (second step formation constant of binary complexes).     

Adsorption ability of Ga5N10 nanomaterial for removing metal ions contamination from drinking water by DFT

The electronic, magnetic, and thermodynamic properties of alkali/alkaline earth metal ion-adsorbed gallium nitride nanocage (Ga₅N₁₀_NC) have been investigated using density functional theory. The results denote that alkali/alkaline earth-metal ion-adsorbed Ga₅N₁₀_NC systems are stable compounds, with the most stable adsorption site being the center of the cage ring. The partial density of states (PDOS) can estimate a certain charge assembly between Li⁺, Na⁺, K⁺/ Be²⁺, Mg²⁺, Ca²⁺ and Ga₅N₁₀_NC which indicate the complex dominant of metallic features as: Ca²⁺ > Mg²⁺ > Be²⁺ >> K⁺ > Na⁺ > Li⁺. For confirmation of magnetic-alignment of Ga₅N₁₀_NC, monovalent (M⁺) and divalent (M²⁺) metal ions were added to the sample to measure the effects of metals on the magnetic-alignment properties of Ga₅N₁₀_NC. Furthermore, the reported results of NMR spectroscopy have exhibited that both M⁺ and M²⁺ can be optimized to achieve optimal alignment of nanocage in the presence of an applied magnetic field; however, chemical shift anisotropy spans for Ca²⁺– and Mg²⁺–containing samples is due to Ca²⁺ and Mg²⁺ ions binding to Ga₅N₁₀_NC. Regarding IR spectroscopy, Li⁺@ Ga₅N₁₀_NC and Be²⁺@ Ga₅N₁₀_NC with more electronegativity appear the most fluctuations through adsorption process. Moreover, based on NQR analysis, Ca²⁺ has shown a different graph of electric potential during trapping in Ga₅N₁₀_NC compared to other metal cations. Based on the results of $$ amounts in this research, the selectivity of metal ion adsorption by gallium nitride nanocage (ion sensor) has been approved as: K⁺>Na⁺> Li⁺ in alkali metals and Ca²⁺>Mg²⁺> Be²⁺ in alkaline earth metals.     

A dual-functional chemosensor based on acylhydrazone derivative for rapid detection of Zn(II) and Mg(II): Spectral properties,recognition mechanism and application studies

In this work, an acylhydrazone derivative (QN62) was developed via the one-step condensation of 6-hydroxy-2-naphthoic hydrazide with quinoline-8-carboxaldehyde. The structure of the QN62 compound was characterized by ¹H NMR, ¹³C NMR, HR-MS (ESI), and X-ray crystallography. As a dual-functional turn-on fluorescence chemosensor, QN62 exhibited rapid recognition for Zn²⁺ in DMSO-H₂O (4:1, v/v) and Mg²⁺ in ethanol-H₂O (9:1, v/v). The enhancement in fluorescence detection was associated with the coordination reaction between QN62 and the target ions, which promoted intramolecular charge transfer and prevented the CN isomerization process. Simultaneously, a rapid color change from colorless to yellowish-green or yellow under UV light (365 nm) was easily visible to the naked eye. Under optimal conditions, the limit of detection and limit of quantification were 32.3 nM and 97.8 nM for Zn²⁺ and 16.1 nM and 48.9 nM for Mg²⁺, respectively. The recognition mechanism was reasonably speculated based on analysis of the Job’s plot, HR-MS, ¹H NMR, and density functional theoretical calculations. Utilizing silica-gel plates fabricated from the QN62 chemosensor, the visual and rapid identification of Zn²⁺ and Mg²⁺ was successfully achieved, which could provide a convenient approach for on-site detection in environmental fields. The QN62 chemosensor could also quantify trace amounts of Zn²⁺ and Mg²⁺ in water samples. Furthermore, the cell imaging experiments indicated that QN62 could effectively sense intracellular Zn²⁺ and Mg²⁺, providing potential applications in biological systems.     

Study of Complex Formation between N-Phenylaza-15-Crown-5 with Mg2+, Ca2+, Ag+ and Cd2+ Metal Cations in Some Binary Mixed Aqueous and Non-aqueous Solvents using the Conductometric Method

The complexation reactions between Mg²⁺, Ca²⁺, Ag⁺ and Cd²⁺ metal cations with N-phenylaza-15-crown-5 (Ph-N15C5) were studied in acetonitrile (AN)–methanol (MeOH), methanol (MeOH)–water (H₂O) and propanol (PrOH)–water (H₂O) binary mixtures at different temperatures using the conductometric method. The conductance data show that the stochiometry of all of the complexes with Mg²⁺, Ca²⁺, Ag⁺ and Cd²⁺ cations is 1:1 (L:M). The stability of the complexes is sensitive to the solvent composition and a non-linear behaviour was observed for variation of log K _f of the complexes versus the composition of the binary mixed solvents. The selectivity order of Ph-N15C5 for the metal cations in neat MeOH is Ag⁺>Cd²⁺>Ca²⁺>Mg²⁺, but in the case of neat AN is Ca²⁺>Cd²⁺>Mg²⁺>Ag⁺. The values of thermodynamic parameters (ΔH _c ^o , ΔS _c ^o ) for formation of Ph-N15C5–Mg²⁺, Ph-N15C5–Ca²⁺, Ph-N15C5–Ag⁺ and Ph-N15C5–Cd²⁺ complexes were obtained from temperature dependence of stability constants and the results show that the thermodynamics of complexation reactions is affected by the nature and composition of the mixed solvents.     

Structure and Stability of Endohedral Complexes X@（HBNH）12

Using quantum chemistry methods B3LYP/6-31＋＋G（d,p） to optimize endohedral complexes X@（HBNH）12 （X=Li^0/＋, Na^0/＋, K^0/＋, Be^0/2＋, Mg^0/2＋, Ca^0/2＋, H and He）, the geometries with the lowest energy were achieved. Inclusion energy, standard equilibrium constant, natural charge, spin density, ionization potentials, and HOMO-LUMO energy gap were also discussed. The calculation predicted that X=Na^0/＋, K^0/＋, Mg^0/2＋, Ca^0/2＋, H and He are nearly located at the center of （HBNH）12 cluster. Li^＋ lies in less than 0.021 nm departure from the center. Li and Be^0/2＋ dramatically deviate from the center. （HBNH）12 prefers to enclose Li^＋, Be^2＋, Mg^2＋, and Ca^2＋ in it than others. Moreover, M@（HBNH）12 （M=Li, Na, K） species are ＂superalkalis＂ in that they possess lower first ionization potentials than the Cs atom （3.9 eV）.     

DFT calculations on the structural stability and infrared spectroscopy of endohedral metallofullerenes

Endohedral metallofullerenes M@C₂₄ (M = Li^0/+, Na^0/+, K^0/+, Be^0/2+, Mg^0/2+ and Ca^0/2+) with different spin configurations have been systematically investigated using the hybrid DFT-B3PW91 functional in conjunction with 6-31G(d) basis sets. Our theoretical studies show that Li@C₂₄, Be@C₂₄, Be²⁺@C₂₄, and Mg²⁺@C₂₄ are energetically favorable. In these endohedral metallofullerenes, only the encapsulated Be and Ca atoms can donate the electrons to the cage. With exception of Be²⁺@C₂₄, the energy gaps of other charged compounds are larger than that of corresponding neutral compounds. We also find that some endohedral metallofullerenes have high energy gaps, but they are unlikely to show high thermodynamic stability. Additionally, the vibrational frequencies and active infrared intensities are also used as evidence to identify these endohedral metallofullerenes.     

Complexation of di-benzyloxy ether derivatives of calix[4]arene with alkali earth metal cations

The synthesis and complexing abilities of 26,28-bis-benzyloxy-25,27-dihydroxy-5,11,17,23-tetra-tertbutyl-calix[4]arene towards alkali earth metal ions Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺ in a methanol-chloroform mixture have been evaluated at 25°C, using UV-Vis spectrophotometric techniques. The results showed that the ligand is capable to complex all alkali earth cations by 1:1 metal to ligand ratios. The selectivity presented considering the calculated stability constants are in the order Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺ towards the ligand.     

A theoretical study of cation--π interactions: Li+, Na+, K+, Be2+, Mg2+ and Ca2+ complexation with mono- and bicyclic ring-fused benzene derivatives

DFT (B3LYP functional) and MP2 methods using 6-311+G(2d,2p) basis set have been employed to examine the effect of ring fusion to benzene on the cation--π interactions involving alkali metal ions (Li⁺, Na⁺, and K⁺) and alkaline earth metal ions (Be²⁺, Mg²⁺ and Ca²⁺). Our present study indicates that modification of benzene (π-electron source) by fusion of monocyclic or bicyclic (or mixture of these two kinds of rings) strengthens the binding affinity of both alkali and alkaline earth metal cations. The strength of interaction decreases in the following order: Be²⁺ > Mg²⁺ > Ca²⁺ > Li⁺ > Na⁺ > K⁺ for any considered aromatic ligand. The interaction energies for the complexes formed by divalent cations are 4–6 times larger than those for the complexes involving monovalent cations. The structural changes in the ring wherein metal ion binds are examined. The distance between ring centroid and the metal ion is calculated for all of the complexes. Strained bicyclo[2.1.1]hexene ring fusion has substantially larger effect on the strength of cation--π interactions than the monocyclic ring fusion for all of the cations due to the π-electron localization at the central benzene ring.     

Thermodynamic studies of alkaline-earth-metal cation complexation by lipophilic dioxa,trioxa, and dithia dicarboxylic acids

Five new lipophilic dicarboxylic acids with systematic structural variation in the bridge which joins the two lipophilic carboxylic acid units have been synthesized. Potentiometric equilibrium measurements of hydrogen ion concentrations have been employed to determine the protonation constants for these lipophilic di-ionizable acyclic ligands in 90% methanol-10% water (v/v) at 25.0 °C and an ionic strength of 0.10 M and the stability constants for their complexes with Mg²⁺, Ca²⁺, and Sr²⁺. Although all five ligands exhibit the highest stability constants for Ca²⁺, the magnitude of the differences between the stability constants for complexation of Ca²⁺ versus Mg²⁺ or Sr²⁺ is found to vary widely depending upon the identity of the bridging unit which joins the two carboxylic acid end groups.     

Cation exchange behaviour of mercury (II) on Dowex 50W-X8

Summary Quantitative studies are reported on the behaviour of mercury at milligram level, using cation exchange resin Dowex 50W-X8. Various eluants such as nitric acid, hydrochloric acid, sulphuric acid, ammonium acetate, sodium nitrate solutions, sodium nitrate-nitric acid mixtures, ammonium acetate-acetic acid mixture are used for column operation. The elution constants are evaluated. Mercury(II) is separated from different cations, i.e., Ca²⁺, Ba²⁺, Sr²⁺, Mg²⁺, Fe³⁺, Al³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cu²⁺ by selective elution.

---

Zusammenfassung Das Verhalten von mg-Mengen Quecksilber am Kationenaustauscher Dowex 50W-X8 wird quantitativ untersucht. Dabei werden folgende Eluierungsmittel benutzt: Salpetersäure, Salzsäure, Schwefelsäure, Lösungen von Ammoniumacetat und Natriumnitrat sowie die Gemische Salpetersäure-Natriumnitrat und Essigsäure-Ammoniumacetat. Die Elutionskonstanten werden berechnet. Durch selektive Eluierung kann Quecksilber von mehreren Kationen (Ca²⁺, Ba²⁺, Sr²⁺, Mg²⁺, Fe³⁺, Al³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cu²⁺) getrennt werden.

     

A simple internal charge transfer probe offering dual optical detection of Co (II) via color and fluorescence modulations

A newly designed internal charge transfer chemosensor, DIPZON exhibits Co²⁺ selective optical responses, which include 112 nm red shift in absorption and a dramatic 37-fold enhancement in the fluorescence output in the buffer CH₃OH/H₂O (1:1 v/v) system. By contrast, the optical responses were not as sensitive with several other biologically relevant metal ions examined with the binding interactions following the sequence Co²⁺ > Cu²⁺ > Zn²⁺ > Cd²⁺ >> Ba²⁺ ≈ Ca²⁺ ≈ Mg²⁺ ≈ K⁺ ≈ Na⁺ ≈ Li⁺.     

Synthesis of a novel poly(para‐phenylene ethynylene) for highly selective and sensitive sensing mercury (II) ions

A new poly(p‐phenylene ethynylene) derivative with pendant 2,2′‐bipyridyl groups and glycol units (PPE‐bipy) has been prepared, and its metal ion sensing properties were investigated. The polymer of PPE‐bipy exhibited high selectivity for Hg²⁺ as compared with Li⁺, Na⁺, K⁺, Ba²⁺, Ca²⁺, Mg²⁺, Al³⁺, Mn²⁺, Ag⁺, Zn²⁺, Pb²⁺, Ni²⁺, Cd²⁺, Cu²⁺, Co,²⁺ and Fe³⁺ in THF/EtOH (1:1, v/v) solution. The fluorescence of PPE‐bipy was efficiently quenched by Hg²⁺ ions, and the detection limit was found to be 8.0 nM in a THF/EtOH (1:1, v/v) solvent system. PPE‐bipy also showed a selective chromogenic behavior toward Hg²⁺ ions by changing the color of the solution from slight yellow to colorless, which can be detected with the naked eye. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1998–2007, 2008     

Running buffers for determination of chromium(VI)/(III), cobalt(II) and zinc(II) in complex matrices by capillary electrophoresis with contactless conductivity detection

Complex matrices and rather high acidity in environmental samples are often the impelling challenges for the used running buffers of capillary electrophoresis. Twelve binary acid-base buffers were evaluated for separation of Cr(VI)/Cr(III), Co²⁺ and Zn²⁺ in a sample containing various salts by capillary electrophoresis with contactless conductivity detector. The malic acid (MA) systems including MA-His (histidine), MA-Arg (arginine) and MA-Tris (tris(hydroxymethyl)aminomethane) were selected as the candidates with powerful separation efficiency and good response sensitivity. In the MA-Tris buffer, optimization were further carried out in terms of the pH value and the concentration of MA, and the optimal conditions were obtained as 6 mM MA-Tris and 2 mM 18-crown-6 at pH 3.5. Furthermore, a real application was demonstrated by analyzing the plating rinse water (pH 0.8), in which the Ca²⁺, Na⁺, Cr(VI)/Cr(III), Co²⁺ and Zn²⁺ were all detected by adjusting at pH 3.5 with 5% (v/v) diluent ammonia. Both the cations, e.g., K⁺, Ca²⁺, Na⁺, Mg²⁺, and the common high concentration anions in the sample, e.g., Cl⁻, SO₄²⁻ and NO₃⁻ did not cause any disturbance to the concerned analytes.     

Thermodynamic modeling for the removal of Cs+, Sr2+, Ca2+and Mg2+ions from aqueous waste solutions using zeolite A</p> </p>

Summary The batch removal ofCs⁺, Sr²⁺, Ca²⁺and Mg²⁺ions from aqueous solutions using synthetic zeolite A was investigated. The influence of the initial ion concentration, pH and temperature was studied. The obtained isotherm data have been correlated with Langumir, Freundlich, and Dubinin-Radushkevich(D-R) isotherm models. The effect of the temperature on the equilibrium distribution values has been utilized to evaluate the standard thermodynamic parameters such as free energy (DG), enthalpy (DH) and entropy (DS). Based on the D-R isotherm expression, the maximum ion-exchange capacity and the mean free energy of each studied ion has been determined. The selectivity sequence, deduced from the equilibrium isotherm data is: Sr²⁺>Ca²⁺>Mg²⁺>Cs⁺>Na⁺.</p> </p>     

The minimal basis set MINI-1—powerful tool for calculating intermolecular interactions. II. Ionic complexes

Optimum geometries and stabilization energies are determined for complexes of H₂O, NH₃, CH₄, C₂H₄, CO, and N₂ with metal cations including Li⁺, Na⁺, K⁺, Rb⁺, Be²⁺, Mg²⁺, Ca²⁺, Zn²⁺, and Al³⁺, for the complex (HO)₂PO ₂ ^– ...Mg²⁺ and for the complexes of water with F^–, Cl^–, and Br^– by SCF calculations employing the MINI-1 minimal gaussian basis sets. The Boys-Bernardi method was used to evaluate the superposition error. Comparison with the extended basis set results revealed that the MINI-1 set gives uniformly good results for a broad variety of ionic complexes and therefore should be preferred to other small basis sets.     

NMR study of the stoichiometry and stability of complexation reaction between Mg2+, Ca2+, Sr2+ and Ba2+ ions and 60-crown-20 in binary acetonitrile solvent mixtures

Proton nuclear magnetic resonance (¹H-NMR) spectroscopy was used to study the complexation reaction between Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ ions and 60-crown-20 in a series of binary mixtures of deuterated acetonitrile (AN), nitromethane (NM) and D₂O at 27?°C. Formation constants of the 1:1 complexes were determined through computer fitting of the chemical shift/mol ratio data and found to vary in the order of Ba²⁺?>?Sr²⁺?>?Mg²⁺?≈?Ca²⁺. The influence of the solvent composition on the stability of the resulting complexes was also discussed. In all cases, the changes in the stability constants with the solvent composition were monotonic and showed a good correlation with the inherent solvation ability of the pure solvents which form the mixture.     

Study of complexation reactions between alkali and alkaline-earth metal cations with dibenzo-18-crown-6(DB18C6) in mixed nonaqueous solvents using the conductometry method

The complexation reactions between alkali and alkaline-earth metal cations with DB18C6 were studied in acetonitrile-methanol (AN-MeOH) and tetrahydrofuran-threechloromethane (THF-CHCl₃) binary mixtures at different temperatures using the conductometric method. The obtained results show that in most cases, the DB18C6 forms 1:1 complexes with these metal cations and the stability of the complexes is affected by the nature and composition of the mixed solvents. The stability order of complexes in AN-MeOH binary systems was found to be Na⁺ > Li⁺, and in the case of THF-CHCl₃ binary mixtures was Na⁺ > Ba²⁺ > Li⁺. An anomalous and interesting behavior was observed for the case of complexation of a K+ ion with DB18C6 in the AN-MeOH binary mixture and also for complexation of Mg²⁺ and Ca²⁺ cations with this ligand in pure THF and also in THF-CHCl₃ binary systems. The values of the thermodynamic parameters (ΔH _c ^o and ΔS _c ^o ) for complexation reactions obtained from the temperature dependence of the stability constants and the results show that the complexes are both enthalpy-and entropy-stabilized. The text was submitted by the authors in English.     

Spectrophotometric studies of alkali and alkali earth metal ions complexes of mono amino derivative of calix[4]arene

The synthesis and complexive abilities of 5,11,17-tris(tert-butyl)-23 amino-25,26,27,28-tetra-propoxycalix[4]arene towards alkali cations Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺ and alkali earth cations Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ in methanol-chloroform mixture have been evaluated at 25°C, using UV-Vis spectrophotometric techniques. The results showed that the ligand is capable to complex with all the cations by 1: 1 metal to ligand ratios. The selectivity presented considering the calculated formation constants are in the order Li⁺ > Na⁺ > K⁺ > Rb⁺ > Cs⁺ and Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺ with the ligand.     

Cation exchange, interlayer spacing, and thermal analysis of Na/Ca-montmorillonite modified with alkaline and alkaline earth metal ions

Na-montmorillonites were exchanged with Li⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺, while Ca-montmorillonites were treated with alkaline and alkaline earth ions except for Ra²⁺ and Ca²⁺. Montmorillonites with interlayer cations Li⁺ or Na⁺ have remarkable swelling capacity and keep excellent stability. It is shown that metal ions represent different exchange ability as follows: Cs⁺?>?Rb⁺?>?K⁺?>?Na⁺?>?Li⁺ and Ba²⁺?>?Sr²⁺?>?Ca²⁺?>?Mg²⁺. The cation exchange capacity with single ion exchange capacity illustrates that Mg²⁺ and Ca²⁺ do not only take part in cation exchange but also produce physical adsorption on the montmorillonite. Although interlayer spacing d ₀₀₁ depends on both radius and hydration radius of interlayer cations, the latter one plays a decisive role in changing d ₀₀₁ value. Three stages of temperature intervals of dehydration are observed from the TG/DSC curves: the release of surface water adsorbed (36?C84?°C), the dehydration of interlayer water and the chemical-adsorption water (47?C189?°C) and dehydration of bound water of interlayer metal cation (108?C268?°C). Data show that the quantity and hydration energy of ions adsorbed on montmorillonite influence the water content in montmorillonite. Mg²⁺-modified Na-montmorillonite which absorbs the most quantity of ions with the highest hydration energy has the maximum water content up to 8.84%.