H atom attack on propene

The reaction of propene (CH(3)CH═CH(2)) with hydrogen atoms has been investigated in a heated single-pulsed shock tube at temperatures between 902 and 1200 K and pressures of 1.5-3.4 bar. Stable products from H atom addition and H abstraction have been identified and quantified by gas chromatography/flame ionization/mass spectrometry. The reaction for the H addition channel involving methyl displacement from propene has been determined relative to methyl displacement from 1,3,5-trimethylbenzene (135TMB), leading to a reaction rate, k(H + propene) → H(2)C═CH(2) + CH(3)) = 4.8 × 10(13) exp(-2081/T) cm(3)/(mol s). The rate constant for the abstraction of the allylic hydrogen atom is determined to be k(H + propene → CH(2)CH═CH(2) + H(2)) = 6.4 × 10(13) exp(-4168/T) cm(3)/(mol s). The reaction of H + propene has also been directly studied relative to the reaction of H + propyne, and the relationship is found to be log[k(H + propyne → acetylene + CH(3))/k(H + propene → ethylene + CH(3))] = (-0.461 ± 0.041)(1000/T) + (0.44 ± 0.04). The results showed that the rate constant for the methyl displacement reaction with propene is a factor of 1.05 ± 0.1 larger than that for propyne near 1000 K. The present results are compared with relevant earlier data on related compounds.     

On the polarizability of the sulfur atom

Using both Thole's and Birge's semiclassical models, the atomic polarizability of the sulfur atom is calculated. It is concluded that the former model is adequate for calculating polarizabilities of atoms belonging to the second row of the periodic table.     

Evaluation of charges on sulfur atom from refraction

Approximate dependence of the refraction of sulfur atom (R _D) on its charge (q _S) is determined. On its basis R _D S values in different sulfur compounds were calculated. Refraction of the unshared electron pair on sulfur atom was found to be equal to 0.96. Refraction increments (Δ = MR _Dfound − MR _Dcalc) of sulfur-containing saturated heterocycles were calculated (thietanes Δ = −0.28, thiolanes Δ = −0.28, thianes Δ = −0.24) as well as the refraction of deuterium atom bound with carbon (1.10). The values of q _S and R _D S in sulfoxides (−0.1 and 6.5 respectively), in sulfones (0.72 and 3.73 respectively), q _S in dialkyl sulfides (−0.25), and also R _D of S⁴⁺ ion (0.77) were refined.     

Rhodium-catalyzed sulfur atom exchange reaction between organic polysulfides and sulfur

RhH(PPh₃)₄ and cis-1,2-bis(diphenylphosphino)ethylene (dppv) catalyze the exchange of sulfur atoms between sulfur and organic polysulfides. The exchange of dialkyl trisulfides with sulfur proceeds at a high efficiency within 5 min at room temperature yielding a mixture of organic polysulfides.     

Direct synthesis of isothiocyanates from isonitriles by molybdenum-catalyzed sulfur transfer with elemental sulfur

The direct molybdenum-catalyzed sulfuration of a variety of isonitriles with elemental sulfur or propene sulfide as sulfur donors affords the corresponding isothiocyanates in good yields and under mild reaction conditions. A catalytic cycle is suggested, in which the molybdenum oxo disulfur complex operates as the active sulfur-transferring species. A novel adduct between the isonitrile and the molybdenum complex has been characterized by X-ray analysis and its association constant determined by UV-vis spectroscopy, but this adduct appears not to be involved in the sulfur-transfer process.     

Lithium-catalyzed hydroxide attack at the carbon atom of methyl phosphate

The spontaneous hydrolysis of phosphate ester monoanions is relatively easy, but the reaction of water with simple phosphate ester dianion appears to be the slowest biomimetic reaction whose spontaneous rate has been measured in water, with an estimated half time of approximately 1012 years at room temperature in the absence of a catalyst. Here, we report an alternative mode of cleavage of methyl phosphate that involves hydroxide attack at the carbon atom of methyl phosphate and proceeds at a rate proportional to the square of the concentration of lithium hydroxide.     

The relative basicity of sulfur containing esters

The relative gas phase proton affinities for an amide, ester, and thiolester have been established as CH₃CONHCH₃ > CH₃COSCH₃ > CH₃COOCH₃ using ion cyclotron resonance techniques. A dithioester is more basic than the thiolester: CH₃CSSCH₃ > CH₃COSCH₃. d-Orbitals are unimportant in the electronic structure of thiolesters.     

First example of the Mislow-Braverman-Evans rearrangement retaining the sulfur atom on the original carbon

Treatment of 1-chloro-2-methylalkenyl p-tolyl sulfoxides with N-lithio 2-piperidone in THF at room temperature resulted in the formation of 1-chloro-2-(hydroxymethyl)alkenyl p-tolyl sulfides in good yields. This reaction is the first example of the Mislow-Braverman-Evans rearrangement retaining the sulfur atom on the original carbon.     

Influence of the boron atom on the solvatochromic properties of 4-nitroaniline-functionalized boronate esters

Para-nitroaniline derivatives with peripheral 1,2- and 1,3-diol functionalities [O(2)N-C(6)H(4)-NR(1)-CH(2)CH(OH)CH(2)OH; O(2)N-C(6)H(4)-NR(1)-CH(CH(2)OH)(2); R(1) = -H, -CH(3)] covalently bonded to the amino group are esterified with various para-substituted phenylboronic acids [R(2)-C(6)H(4)-B(OH)(2); R(2) = -OCH(3), -CH(3), -H, -Br, -CHO, -NO(2), -B(OH)(2)], and the solvatochromic properties of these esters are investigated in 33 solvents of different polarity. To interpret the solvent effects, the established linear solvation energy (LSE) multiparameter equations of Kamlet-Taft and the improved Catalán scales are used. Although the boron atom is separated by two or three sp(3)-hybridized carbon atoms from the actual chromophore, solvation effects have a significant positive solvatochromic effect on the nitroaniline unit (R(1) = -CH(3)) as result of the solvent acting as a donor at the boron atom. The influence of the substituent R(2) on the coefficient b of the LSE relationship according to Kamlet-Taft and Catalán, which reflects the quantitative influence of the hydrogen-bonding acceptor or the electron-pair donor capacity of the solvent on the position of the UV-vis absorption maximum, can be determined via a linear Hammett relationship [b = f(σ(p))]. The interpretation of the effects is based on the electronic influence of the solvated boronic acid ester unit on the 4-nitroaniline group, predominantly through inductive interactions.     

The effect of carbonyl carbon atom replacement in acetone molecule (ACN) by sulfur atom (DMSO)

Enthalpies of solution of 1,4-dioxane, 12-crown-4 ether (12C4), 15-crown-5 ether (15C5) and 18-crown-6 (18C6) have been analyzed from the point of view of preferential solvation of these cyclic ethers (crown ethers) by a molecule of acetone or dimethylsufoxide in the mixtures of water with acetone or dimethylsulfoxide. It has been observed that the carbonyl carbon atom replacement in acetone molecule by sulfur atom brings about completely different behavior of molecules of these solvents in relation to cyclic ethers dissolved in mixed solvents. Crown ethers are preferentially solvated by acetone (ACN) molecules, which is not observed in the case of dimethylsulfoxide (DMSO).     

The effect of carbonyl carbon atom replacement in acetone molecule (ACN) by sulfur atom (DMSO)

The enthalpies of solution of cyclic ethers: 1,4-dioxane, 12-crown-4 (12C4), and 18-crown-6 (18C6) in water–acetone mixtures have been measured within the whole mole fraction range at 298.15 K. Based on the obtained data, the effect of base–acid properties of water–acetone mixtures on the solution enthalpy of cyclic ethers in this mixed solvent has been analyzed. The strong dependence of the enthalpy of solution (solvation) of cyclic ethers on basic properties of mixed solvent has been observed. The effects of carbonyl atom replacement in acetone (ACN) molecule by sulfur atom (DMSO molecule) and base–acid properties of mixed solvent on the solvation process of cyclic ethers have been analyzed.     

Direct microanalysis by negative ion fast atom bombardment mass spectrometry

In negative ion fast atom bombardment (FAB) mass spectrometry, the use of a liquid matrix comprised of 15-crown-5—glycerol (1:10, v/v) enabled the molecular weight determination of small amounts of non-volatile acidic molecules. This ionization process could result in detection limits of less than one-fifth of those obtained using only glycerol as matrix. The function of the matrix as a proton acceptor is emphasized.     

Thermal stability of phthalate esters: Effect of substituents on the β-carbon atom

In order to clarify the mechanism conferring heat resistance on phthalate esters, those with a substituent on the β-carbon atom, such as bis(2-aminobutyl) phthalate, bis(2-nitrobutyl) phthalate, bis(2,4-diphenylbutyl) phthalate and dineopentyl phthalate, were synthesized and their thermal stabilities were studied by thermogravimetry and differential thermal analysis. The analytical results for these phthalate esters were compared with those for dibutyl phthalate, with a straight alkyl chain. As the temperatures required for a 3% weight loss of phthalate esters with a substituent, an electron-donating group (amino group) or an electron-accepting group (nitro group) on the β-carbon atom move to the higher end of the range, the effect of the adjacent group was recognized. The presence of a phenyl group in phthalate esters considerably improved the heat resistance. It is considered that the high heat resistance of bis(2,4-diphenylbutyl) phthalate is due to the obstruction of the planar configuration for cis elimination by the phenyl group and hindrance by the phenyl group of the formation of the six-membered cyclic transition state owing to the interaction between non-bondable molecules.     

Direct displacement of alkoxy groups of vinylogous esters by Grignard reagents

The direct displacement of alkoxy groups from the β position of aromatic and unsaturated esters and ketones is described. The reaction is chemo- and regioselective, displaying wide substrate scope.     

Radioanalytical methods in the hot atom chemistry of sulfur in inorganic systems

The paper presents a comprehensive review of radioanalytical methods for chemical identification of radioactive sulfur atoms recoiling in neutron irradiated (or implanted) inorganic systems.