Formation of a Polypseudorotaxane via Self‐Assembly of γ‐Cyclodextrin with Poly(N‐isopropylacrylamide)

A polypseudorotaxane (PPR) comprising γ‐cyclodextrin (γ‐CD) as host molecules and poly(N‐isopropylacrylamide) (PNIPAM) as a guest polymer is prepared via self‐assembly in aqueous solution. Due to the bulky pendant isopropylamide group, PNIPAM exhibits size‐selectivity toward self‐assembly with α‐, β‐, and γ‐CDs. It can fit into the cavity of γ‐CD to give rise to a PPR, but cannot pass through α‐CD and β‐CD under the same conditions. The ratio of the number of γ‐CD molecules to entrapped NIPAM repeat units is kept at 1:2.2 or 1:2.4, determined by ¹H NMR spectroscopy and TGA analysis, respectively, indicating that there are more than 2 but less than 3 NIPAM repeat units included by one γ‐CD molecule. This finding opens new avenues to PPR‐based supramolecular polymers to be used as solid, stimuli‐responsive materials.     

The Contrasting Recognition Behavior of β‐Cyclodextrin and Its Sulfobutylether Derivative towards 4′,6‐Diamidino‐2‐phenylindole

The noncovalent interactions between 4′, 6‐diamidino‐2‐phenylindole (DAPI) and sulfobutylether β‐cyclodextrin (SBE₇β‐CD) are evaluated by using photochemical measurements and compared with that of native β‐CD. Contrasting recognition behavior and intriguing modulations in the photochemical behavior of DAPI were observed. In particular, a large enhancement in the fluorescence emission and excited‐state lifetime were seen upon binding to SBE₇β‐CD, with the SBE₇β‐CD inclusion complex being approximately 1000 times stronger than that of β‐CD. The ensuing fluorescence “turn on” was demonstrated to be responsive to chemical stimuli, such as metal ions and adamantylanmine (AD). Upon addition of Ca²⁺/AD, nearly quantitative dissociation of the complex was established to regenerate the free dye and result in fluorescence “turn off”. The SO₃^? groups are believed to be critical for the strong and selective binding of the chromophore and the stimuli‐responsive tuning. This is as an important design criterion for the optimization of host–guest properties through supramolecular association, which is relevant for drug‐delivery applications.     

Construction of Chemical‐Responsive Supramolecular Hydrogels from Guest‐Modified Cyclodextrins

A methodology for preparing supramolecular hydrogels from guest‐modified cyclodextrins (CDs) based on the host–guest and hydrogen‐bonding interactions of CDs is presented. Four types of modified CDs were synthesized to understand better the gelation mechanism. The 2D ROESY NMR spectrum of β‐CD‐AmTNB (Am=amino, TNB=trinitrobenzene) reveals that the TNB group was included in the β‐CD cavity. Pulsed field gradient NMR (PFG NMR) spectroscopy and AFM show that β‐CD‐AmTNB formed a supramolecular polymer in aqueous solution through head‐to‐tail stacking. Although β‐CD‐AmTNB did not produce a hydrogel due to insufficient growth of supramolecular polymers, β‐CD‐CiAmTNB (Ci=cinnamoyl) formed supramolecular fibrils through host–guest interactions. Hydrogen bonds between the cross‐linked fibrils resulted in the hydrogel, which displayed excellent chemical‐responsive properties. Gel‐to‐sol transitions occurred by adding 1‐adamantane carboxylic acid (AdCA) or urea. ¹H NMR and induced circular dichroism (ICD) spectra reveal that AdCA released the guest parts from the CD cavity and that urea acts as a denaturing agent to break the hydrogen bonds between CDs. The hydrogel was also destroyed by adding β‐CD, which acts as the competitive host to reduce the fibrils. Furthermore, the gel changed to a sol by adding methyl orange (MO) as a guest compound, but the gel reappeared upon addition of α‐CD, which is a stronger host for MO.     

Solubilization of Polycyclic Aromatics in Water by γ‐Cyclodextrin Derivatives

A series of hydrophilic per‐6‐thio‐6‐deoxy‐γ‐cyclodextrins (CDs) were synthesized from per‐6‐iodo‐6‐deoxy‐γ‐CD. These new hosts are able to solubilize polycyclic aromatic guests in aqueous solution to much higher extents than native CDs. Phase‐solubility diagrams were mostly linear in accordance with both 1:1 and 1:2 CD–guest complexes in aqueous solution. The stoichiometry of the inclusion complexes was further investigated by fluorescence spectroscopy, which revealed very pronounced Stokes shifts typical for 1:2 complexes. This finding was further consolidated by quantum mechanical calculations of dimer formation of the guests and space‐filling considerations by using the cross‐sectional areas of the CDs and guests. The calculated dimerization energies correlated well with the binding free energies measured for the 1:2 complexes, and provided the main contribution to the driving force of complexation in the γ‐CD cavity.     

Photophysical Properties of Coumarin‐30 Dye in Aprotic and Protic Solvents of Varying Polarities¶

Experimental results on various photophysical properties of coumarin‐30 (C30) dye, namely, Stokes' shift (Δv), fluorescence quantum yield (τ_f), fluorescence lifetime (τ_f), radiative rate constant (k_f) and nonradiative rate constant (k_nr), as obtained using absorption and fluorescence measurements have been reported. Though in most of the solvents the properties of C30 show more or less linear correlation with the solvent polarity function, Δf= [(ε ‐ 1)/(2ε+ 1) ‐ (n² ‐ 1)/ (2n²+ l)], they show unusual deviations in nonpolar solvents at one end and in high‐polarity protic solvents at the other end. From the solvent polarity and temperature effect on the photophysical properties of the dye, following inferences have been drawn: ( 1 ) in nonpolar solvents, the dye exists in a nonpolar structure, where its 7‐NEt₂ substituent adopts a pyramidal configuration and the amino lone pair is out of resonance with the benzopyrone π cloud; ( 2 ) in medium to higher polarity solvents, the dye exists in a polar intra‐molecular charge transfer structure, where the 7‐NEt₂ group and the 1,2‐benzopyrone moiety are in the same plane and the amino lone pair is in resonance with the benzopyrone π cloud; ( 3 ) in protic solvents, the dye‐solvent intermolecular hydrogen bonding influences the photophysical properties of the dye; and ( 4 ) in high‐polarity protic solvents, the excited C30 undergoes a new activation‐controlled nonradiative deexcitation process because of the involvement of a twisted intra‐molecular charge transfer (TICT) state. Contrary to most other TICT molecules, the activation barrier for this deexcitation process in C30 is observed to increase with solvent polarity. A rational for this unusual behavior has been given on the basis of the solvent polarity‐dependent stabilization and crossing of relevant electronic states and the relative propensity of interconversion among these states.     

Nucleation effect of cyclodextrin inclusion complexes on the crystallization of isotactic poly(1‐butene)

The β‐cyclodextrin (β‐CD) and γ‐cyclodextrin (γ‐CD) inclusion complexes (ICs) with four kinds of polyolefin were prepared. The crystallization behavior of isotactic poly(1‐butene) (iPB‐1) blended with these CDs and ICs was investigated by differential scanning calorimetry, polarized optical microscopy, and wide‐angle X‐ray diffraction. The iPB‐1 blended with the ICs was found to exhibit higher crystallization temperature (T_C), smaller spherulites, and faster crystallization rate than neat iPB‐1. These results indicate that the ICs can act as nucleating agent on the crystallization of iPB‐1 and induce the accelerated crystallization. The guest molecules of ICs play an important role in the nucleation effect of ICs on the crystallization of iPB‐1. ICs with polyolefin having higher T_C as guest molecules have higher nucleation effect than the one with polyolefin having lower T_C as guest molecules. And, the CDs and ICs induce different crystal form of iPB‐1. The crystal of iPB‐1 blended with CDs is defective, whereas the crystal of iPB‐1 blended with ICs is more perfect. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 389–395, 2010     

Interaction of Fluorescently Labeled Triethyleneglycol and Peptide Derivatives with β‐Cyclodextrin

A triethyleneglycol (TEG) chain, a linear peptide, and a cyclic peptide labeled with 7‐methoxycoumarin‐3‐carboxylic acid (MC) and 7‐diethylaminocoumarin‐3‐carboxylic acid (DAC) were used to thoroughly study Förster resonance energy transfer (FRET) in inclusion complexes. ¹H NMR evidence was given for the formation of a 1:1 inclusion complex between β‐cyclodextrin (β‐CD) and the fluorophore moieties of model compounds. The binding constant was 20 times higher for DAC than for MC derivatives. Molecular modeling provided additional information. The UV/Vis absorption and fluorescence properties were studied and the energy transfer process was quantified. Fluorescence quenching was particularly strong for the peptide derivatives. The presence of β‐CDs reduced the FRET efficiency slightly. Dye‐labeled peptide derivatives can thus be used to form inclusion complexes with β‐CDs and retain most of their FRET properties. This paves the way for their subsequent use in analytical devices that are designed to measure the activity of matrix metalloproteinases.     

Access to Versatile β‐Cyclodextrin Scaffolds through Guest‐Mediated Monoacylation

Herein, we report the selective mono‐derivatization of heptakis[6‐deoxy‐6‐(2‐aminoethylsulfanyl)]‐β‐CD ( 1 ) through a guest‐mediated covalent capture strategy. The use of guests functionalized with cleavable linkers enables the installation of an amine‐orthogonal thiol group on the primary rim of 1 as a handle for further transformations to the β‐CD scaffold. Applying this methodology, two novel monoderivatized β‐CDs were obtained in good yield and high purity. Both of these monoacylated CDs were amenable to facile linker cleavage and further modification at the resulting thiol group. This methodology can be applied towards the synthesis heterofunctionalized β‐CD constructs for analyte sensing, drug delivery, and other applications.     

Synthesis and Structures of N‐Alkyl‐1,13‐dimethoxychromeno‐ [2,3,4‐kl]acridinium Salts: The Missing Azaoxa[4]helicenium

Helical structures are interesting due to their inherent chirality. Helicenium ions are triarylmethylium structures twisted into configurationally stable helicenes through the introduction of two heteroatom bridges between the three aryl substituents. Of the configurationally stable [4]helicenium ions, derivatives with sulfur, oxygen and nitrogen bridges have already been synthesised. However, one [4]helicenium ion has proven elusive, until now. We present herein the first synthesis of the 1,13‐dimethoxychromeno[2,3,4‐kl]acridinium (DMCA⁺) [4]helicenium ion. A series of six differently N‐substituted DMCA⁺ ions as their hexafluorophosphate salts are reported. Their cation stability was evaluated and it was found that DMCA⁺ is ideally suited as a phase‐transfer catalyst with a pK_R+ of 13.0. The selectivity of nucleophilic addition to the central carbon atom of DMCA⁺ has been demonstrated with diastereotopic ratios of up to 1:10. The single‐crystal structures of several of the DMCA⁺ salts were determined, and structural differences between N‐aryl‐ and N‐alkyl‐substituted cations were observed. The results of a comparative study of the photophysics of the [4]helicenium ions are presented. DMCA⁺ is found to be a potent red‐emitting dye with a fluorescence quantum yield of 20 % in apolar solvents and a fluorescence lifetime of 12 ns. [4]Helicenium ions, including DMCA⁺, all suffer from solvent‐induced quenching, which reduces the fluorescence quantum yields significantly (?_fl<5 %) in polar solvents. A difference in photophysical properties is observed between N‐aryl‐ and N‐alkyl‐substituted DMCA⁺, which has tentatively been attributed to a difference in molecular conformation.     

Complexation of 4‐dimethylaminoazobenzene with various kinds of cyclodextrins: Effects of cyclodextrins on the thermal cis‐to‐trans isomerization

On the basis of the change in electronic and induced circular dichroism spectra for complex formation, the complexation of 4‐dimethylaminoazobenzene (DAAB) with four kinds of cyclodextrins (α‐ and β‐cyclodextrin (CD), heptakis(2,6‐di‐O‐methyl)‐β‐cyclodextrin, and heptakis(2,3,6‐tri‐O‐methyl)‐β‐cyclodextrin) was studied in methanol–water and dimethyl sulfoxide–water mixtures. It was found that the trans and cis isomers of DAAB form two different types of complex (inclusion and lid type) with CDs, depending on the kinds of CDs and solvents. Further, we have examined the effect of CDs on the thermal cis‐to‐trans isomerization of DAAB. The accelerated or decelerated effect on the thermal isomerization was observed upon adding CDs. The effects of CDs on the thermal isomerization are discussed in connection with the complexation of the cis‐isomer of DAAB with CDs. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 481–487, 2002     

Inclusion of Ethyl Acetoacetate Bearing 7‐Hydroxycoumarin Dye by β‐Cyclodextrin and its Cooperative Assembly with Mercury(II) Ions: Spectroscopic and Molecular Modeling Studies

The inclusion of the fluorescent organic dye, ethyl 3‐(7‐hydroxy‐2‐oxo‐2H‐chromen‐3‐yl)‐3‐oxopropanoate ( 1 ) by the host β‐cyclodextrin (β‐CD), and its response toward mercuric ions (Hg²⁺), was studied by UV/Vis, fluorescence, and ¹H NMR spectroscopic analyses, mass spectrometry and molecular modeling studies. ¹H NMR measurements together with molecular modeling studies for dye 1 demonstrate that it exhibits two tautomeric forms (keto and enol); however, when the dye is included into the β‐CD cavity, the enol form predominates. Moreover, by using spectroscopic and spectrometry techniques, a 1:1 stoichiometry was determined for the complexes formed between dye 1 (enol form) and β‐CD, with a binding constant (K_b1=1.8×10⁴ m ^?1) and for the dye 1 (keto form)‐Hg²⁺ (K_b2=2.3×10³ m ^?1). Interestingly, in the presence of 1 –β‐CD complex and mercuric ions, a ternary supramolecular system (Hg– 1 –β‐CD complex) was established, with a 1:1:1 stoichiometry and a K_b3 value of 4.3×10³ m ^?1, with the keto form of the dye being the only one present in this assembly. The three‐component system provides a starting point for the development of novel and directed supramolecular assemblies.     

Photophysics of a Coumarin in Different Solvents: Use of Different Solvatochromic Models

This study reported the photophysics of 7‐(diethylamino)coumarin‐3‐carboxylic acid N‐succinimidyl ester (7‐DCCAE) in different neat solvents of varying polarity using steady‐state absorption, fluorescence emission and picosecond time‐resolved spectroscopy. In nonpolar solvents, the dye molecule predominantly exists in nonpolar structure and exhibits very low value of nonradiative decay rate constant (k_nr), demonstrating the emission takes place from S₁‐LE to S₀ ground state. The fluorescence quantum yields, lifetime values of 7‐DCCAE in different solvents are rationalized on the basis of intramolecular charge transfer (ICT) followed by twisted intramolecular charge transfer state formation (TICT) as well as specific solute–solvent interactions. Several solvatochromic models (such as Lippert, Dimroth, Kamlet–Taft, Catalán 3P and Catalán 4P models) were used to analyze the solvatochromic shift of 7‐DCCAE in different solvents. The different empirical models show that the observed results are better correlate for nonchlorinated solvents and provide statistically significant best‐fit result. A comparison was done between comparatively new solvatochromic model (Catalán 3P and Catalán 4P model) with Kamlet–Taft model. The ground state structure of the said molecule was optimized by using Density Functional Theory (DFT).     

Phosphoryl group differentiating α‐amino acids from β‐ and γ‐amino acids in prebiotic peptide formation

In recent years β‐amino acids have increased their importance enormously in defining secondary structures of β‐peptides. Interest in β‐amino acids raises the question: Why and how did nature choose α‐amino acids for the central role in life? In this article we present experimental results of MS and ³¹P NMR methods on the chemical behavior of N‐phosphorylated α‐alanine, β‐alanine, and γ‐amino butyric acid in different solvents. N‐Phosphoryl α‐alanine can self‐assemble to N‐phosphopeptides either in water or in organic solvents, while no assembly was observed for β‐ or γ‐amino acids. An intramolecular carboxylic–phosphoric mixed anhydride (IMCPA) is the key structure responsible for their chemical behaviors. Relative energies and solvent effects of three isomers of IMCPA derived from α‐alanine (2a–c), with five‐membered ring, and five isomers of IMCPA derived from β‐alanine (4a–e), with six‐membered ring, were calculated with density functional theory at the B3LYP/6‐31G** level. The lower relative energy (3.2 kcal/mol in water) of 2b and lower energy barrier for its formation (16.7 kcal/mol in water) are responsible for the peptide formation from N‐phosphoryl α‐alanine. Both experimental and theoretical studies indicate that the structural difference among α‐, β‐, and γ‐amino acids can be recognized by formation of IMCPA after N‐phosphorylation. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 232–241, 2003     

Energy Dissipation Processes of singlet‐excited 1‐Hydroxyfluorenone and its Hydrogen‐bonded Complex with N‐methylimidazole¶

Effects of solvent, pH and hydrogen bonding with N‐methylimidazole (MIm) on the photophysical properties of 1‐hydroxyfluorenone (1HOF) have been studied. Fluorescence lifetime, fluorescence quantum yield and triplet yield measurements demonstrated that intersystem crossing was the dominant process in apolar media and its rate constant significantly diminished with increasing solvent polarity. The acceleration of internal conversion in alcohols paralleled the strength of intermolecular hydrogen bonding. The faster energy dissipation from the singlet‐excited state in cyclohexane was attributed to intramolecular hydrogen bonding. The pK_a of 1HOF decreased from 10.06 to 5.0 on light absorption, and H₃O⁺ quenched the singletexcited molecules in a practically diffusion‐controlled reaction. On addition of MIm in toluene, dual fluorescence was observed, which was attributed to reversible formation of excited hydrogen‐bonded ion pair. Rate constants for the various deactivation pathways were derived from the combined analysis of the steady‐state and the time‐resolved fluorescence results.     

New 2,6‐Distyryl‐Substituted BODIPY Isomers: Synthesis,Photophysical Properties,and Theoretical Calculations

A 2,6‐distyryl‐substituted boradiazaindacene (BODIPY) dye and a new series of 2,6‐p‐dimethylaminostyrene isomers containing both α‐ and β‐position styryl substituents were synthesized by reacting styrene and p‐dimethylaminostyrene with an electron‐rich diiodo‐BODIPY. The dyes were characterized by X‐ray crystallography and NMR spectroscopy and their photophysical properties were investigated and analyzed by carrying out a series of theoretical calculations. The absorption spectra contain markedly redshifted absorbance bands due to conjugation between the styryl moieties and the main BODIPY fluorophore. Very low fluorescence quantum yields and significant Stokes shifts are observed for 2,6‐distyryl‐substituted BODIPYs, relative to analogous 3,5‐distyryl‐ and 1,7‐distyryl‐substituted BODIPYs. Although the fluorescence of the compound with β‐position styryl substituents on both pyrrole moieties and one with both β‐ and α‐position substituents was completely quenched, the compound with only α‐position substituents exhibits weak emission in polar solvents, but moderately intense emission with a quantum yield of 0.49 in hexane. Protonation studies have demonstrated that these 2,6‐p‐dimethylaminostyrene isomers can be used as sensors for changes in pH. Theoretical calculations provide strong evidence that styryl rotation and the formation of non‐emissive charge‐separated S₁ states play a pivotal role in shaping the fluorescence properties of these dyes. Molecular orbital theory is used as a conceptual framework to describe the electronic structures of the BODIPY core and an analysis of the angular nodal patterns provides a reasonable explanation for why the introduction of substituents at different positions on the BODIPY core has markedly differing effects.     

Polyrotaxanes based on polyethers and β‐cyclodextrin

A polyrotaxane in which β‐cyclodextrins (β‐CDs) are threaded onto a polyether chain was prepared by polycondensation of a β‐CD/bisphenol A (BPA) inclusion complex with aromatic dihalides. Two dihalides, with and without a side chain, were used. This polycondensation results in a polyrotaxane (or pseudopolyrotaxane for polymers without stoppers) with a 1:1 threading ratio when the side chain is present and 2:3 when there is none. The long side chain prevents dethreading of the macrocycles. The best yield and a good threading ratio were obtained when the polycondensation was performed by liquid?solid phase transfer catalysis without solvent (L/S PTC) using 2,5‐bi(iodomethyl)‐4‐methoxy‐(1‐octyloxy)benzene as dihalide. The ¹H NMR and FTIR spectra show that the products consist of β‐CD and polyether. The 2D NOESY NMR spectrum shows that the polyether chains are included in the β‐CD cavity. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4391–4399, 2009     

Heptyl α‐D‐Mannosides Grafted on a β‐Cyclodextrin Core To Interfere with Escherichia coli Adhesion: An In Vivo Multivalent Effect

n‐Heptyl α‐D ‐mannoside (HM) has previously been identified as a nanomolar FimH antagonist able to prevent Escherichia coli adhesion. We have designed mono‐ and heptavalent glycoconjugates in which HM is tethered to β‐cyclodextrin (β‐CD) through short and long spacers. One‐pot click or co‐clicking procedures were developed to directly obtain the glycoconjugates from unprotected HM and β‐CD precursors. These FimH antagonists were examined biophysically and in vivo. Reverse titrations by isothermal calorimetry led to trapping of the short‐tethered heptavalent β‐CD in a complex with three FimH lectins. Combined dynamic light scattering and small‐angle X‐ray solution scattering data allowed the construction of a model of the FimH trimer. The heptavalent β‐CDs were shown to capture and aggregate living bacteria in solution and are therefore also able to aggregate FimH when attached to different bacteria pili. The first in vivo evaluation of multivalent FimH inhibitors has been performed. The heptavalent β‐CDs proved to be much more effective anti‐adhesive agents than monovalent references with doses of around 2 μg instilled in the mouse bladder leading to a significantly decreased E. coli load. Intravenously injected radiolabeled glycoconjugates can rapidly reach the mouse bladder and >2 μg concentrations can easily be retained over 24 h to prevent fluxing bacteria from rebinding.     

Separation and Migration Behavior of Dichlorophenols in β‐Cyclodextrin‐Modified Capillary Zone Electrophoresis

The separation and migration behavior of six isomeric dichlorophenols (DCPs) in cyclodextrin‐modified capillary zone electrophoresis (CD‐CZE) using a phosphate‐borate buffer at alkaline pH with β‐CD and hydroxypropyl‐β‐CD (HP‐β‐CD) as electrolyte modifiers were investigated. The influence of buffer pH and the concentration of β‐cyclodextrins were examined. The results indicate that baseline separation of six isomeric DCPs can be achieved with addition of β‐CD concentration in the range of 2.0‐10 mM or HP‐β‐CD concentration in the range of 4.0‐10 mM at pH 10.0. Binding constants of DCPs to β‐CDs were evaluated for a better understanding of the interaction of DCPs with β‐CDs.     

Synthesis and Spectral Properties of 4‐(2,5‐Dimethoxyphenylmethelene)‐2‐phenyl‐5‐oxazolone (DMPO)

An interesting flourophore, 4‐(2,5‐dimethoxyphenylmethelene)‐2‐phenyl‐5‐oxazolone (DMPO) was synthesized by mixing an equivalent molar quantity of hippuric acid and 2,5‐dimethoxybenzaldehyde in acetic anhydride in the presence of anhydrous sodium acetate. The absorption and fluorescence characteristics of 4‐(2,5‐dimethoxy‐phenylmethelene)‐2‐phenyl‐5‐oxazolone (DMPO) were investigated in different solvents. DMPO dye exhibits red shift in both absorption and emission spectra as solvent polarity increases, indicating change in the dipole moment of molecules upon excitation due to an intramolecular charge transfer interaction. The fluorescence quantum yield depends strongly on the properties of the solvents, which was attributed to positive and negative solvatokinetic effects. A crystalline solid of DMPO gave strong excimer like emission at 630 nm due to the excitation of molecular aggregates. This is expected from the idealized crystal structure of the dye that belongs to the B‐type class of Steven's Classification. DMPO displayed fluorescence quenching by triethylamine via nonemissive exciplex formation.