Synthesis of dipeptides from N-hydroxy-3-azaspiro[5,5]undecane-2,4-dione activated α-amino acids

A simple two step procedure for the synthesis of a dipeptide from N-hydroxy-3-azaspiro[5,5]undecane-2,4-dione (HO-ASUD) activated α-amino acids is described. In presence of DCC, N-hydroxy-3-azaspiro[5,5]undecane-2,4-dione readily esterifies the carboxylic acid group of all the N-protected amino acids to yield crystalline N-hydroxy-3-aza spiro[5,5]undecane-2,4-dione activated carboxy ester. The N-hydroxy-3-aza spiro[5,5]undecane-2,4-dione activated carboxy esters of N-protected amino acids readily condensed with other amino acids and gave a dipeptide. This new method is effective for the DCC coupling of a variety of chiral amino acids without loss of enantiomeric purity. Synthesis of fifteen dipeptides including the hitherto unreported Fmoc-l-Orn(Boc)-Val-OMe, Fmoc-l-Cys(trt)-Gly-OEt and Boc-l-Tyr-Gly-OEt is presented.     

Studies on organophosphorus compounds—XXVII: Synthesis of thiono-, thiolo- and dithiolactones

Unsubstituted and alkyl- or cyanosubstituted lactones such as dihydro-2(3 H)-furanone, dihydro-5-methyl-2(3 H)-furanone, dihydro-5,5-dimethyl-4-propyl-2(3 H)-furanone and tetrahydro-2,2-dimethyl-5-oxo-3furan-carbonitrile react with the dimer of p-methoxyphenylthionophosphine sulfide, 1, in anhydrous xylene or toluene to give the corresponding thionolactones, 3a-d, in good yields. Dihydro-2(3 H)-thiophenone and 1 produce dihydro-2(3 H)-thiophenthione. Aromatic lactones such as 2 H-1-benzopyran-2-one give the corresponding 2-thione. 1-Oxa-4-thiaspiro[4,5]decan-2-one, when treated with 1 at 120-125°, gave 1,4-dithiaspiro[4,5]decan-2-one and 1,4-dithias-piro[4,5]decan-2-thione. Tetrahydro-5,5-dimethyl-2-oxo-4-propyl-3-furancarboxylic acid ethyl ester reacted with 1 at 110° giving the corresponding 2-thione and 5,5-dimethyl-4-propyl-4,5-dihydrothieno[2,3-c]-1,2-dithiole-3-thione.     

Chalcogen–acetylide interaction and unusual reactivity of coordinated acetylide with water: synthesis and characterisation of [(η5-C5R5)Fe3(CO)6(μ3-E)(μ3-ECCH2RI)] (R=H,Me; RI=Ph,Fc; E=S,Se) and [(η5-C5R5)MoFe2(CO)6(μ3-S)(μ-SCCH2Ph)] (R=H,Me)

Photolysis of a benzene solution containing [Fe₃(CO)₉(μ₃-E)₂] (E=S, Se), [(η⁵-C₅R₅)Fe(CO)₂(CCR^I)] (R=H, Me; R^I=Ph, Fc), H₂O and Et₃N results in formation of new metal clusters [(η⁵-C₅R₅)Fe₃(CO)₆(μ₃-E)(μ₃-ECCH₂R^I)] (R=H, R^I=Ph, E=S 1 or Se 2; R=Me, R^I=Ph, E=S 3 or Se 4; R=H, R^I=Fc, E=S 5; R=Me, R^I=Fc, E=S 6 or Se 7). Reaction of [Fe₃(CO)₉(μ₃-S)₂]with [(η⁵-C₅R₅)Mo(CO)₃(CCPh)] (R=H, Me), under same conditions, produces mixed-metal clusters [(η⁵-C₅R₅)MoFe₂(CO)₆(μ₃-S)(μ-SCCH₂Ph)] (R=H 8; R=Me 9). Compounds 1–9 have been characterised by IR and ¹H and ¹³C-NMR spectroscopy. Structures of 1, 5 and 9 have been established crystallographically. A common feature in all these products is the formation of new C-chalcogen bond to give rise to a (ECCH₂R^I) ligand.     

Unusual reactions of 5,5-dimethyl-2-(indenyl-2)-3-pyrazolidinone with acetylenedicarboxylates

[reaction: see text] Reaction of 5,5-dimethyl-3-pyrazolidinone (1) with 2-indanone (2) gave 5,5-dimethyl-2-(1H-indenyl-2)-3-pyrazolidinone (3) instead of the expected azomethine imine 4. Although reaction of 2-substituted 3-pyrazolidinones with acetylenedicarboxylates usually gives ring expansion products, such as 1,2-diazepines, treatment of 3 with dialkyl acetylenedicarboxylates (5, R = Me; 6 R = Et) resulted in the formation of rel-(7aR,12aS)-6,7-bis(alkoxycarbonyl)-3,4-dihydro-4,4-dimethyl-7aH-indano[1,2-b]pyrrolo[1,2-a]pyrimidin-2-ones (7, R = Me; 9, R = Et) as major products and 3,4-bis(alkoxycarbonyl)-7,7-dimethyl-2-(indenyl-2)-6,7-dihydro-2H,6H-1,2-diazepin-5-ones (8, R = Me: 10, R = Et) as minor products.     

Studies on the syntheses of heterocyclic compounds—DLIX : A synthesis of benzocarbazole derivatives by thermolysis

A thermal reaction of indolylmagnesium bromide (5) with 1-cyano-4,5-dimethoxybenzocyclobutene (6) gave a mixture of 6-cyano-5a, 6,11,11a-tetrahydro-8,9-dimethoxy-5H-benzo [b] carbazole (8a) and 6-cyano-5a, 6, 11, 11a-tetrahydro-9-hydroxy-8-methoxy-5H-benzo [b] carbazole (10). Compound 8a was easily converted to 6-cyano-8, 9-dimethoxy-5H-benzo [b] carbazole (12) by dehydrogenation on 30% Pd-C.     

Platinum thiosemicarbazide and thiourea complexes: the crystal structure of [PtCl(dppe){SC(NHMe)NHNMe2-S}](PF6) and the influence of intramolecular hydrogen bonding on ligand co-ordination mode

The reaction of [PtCl₂(dppe)] [dppe=1,2-bis(diphenylphosphino)ethane] with two equivalents of the thioureas NHRC(S)NHR (R=H, Me, Et) in the presence of NH₄PF₆ led to substitution of both chlorides and formation of the complexes [Pt(dppe){SC(NHR)₂}₂](PF₆)₂ (1a, R=H; 1b, R=Me; 1c, R=Et). In contrast, the reaction of [PtCl₂(dppe)] with one equivalent of the potentially bidentate thiosemicarbazides NHRC(S)NHNR′₂ (R=Me, R′=H; R=Et, R′=H; R=Ph, R′=H; R=Me, R′=Me) in the presence of NH₄PF₆ led to substitution of only one chloride and formation of the complexes [PtCl(dppe){SC(NHR)NHNR₂′-S}](PF₆) (2a, R=Me, R′=H; 2b, R=Et, R′=H; 2c, R=Ph, R′=H; 2d, R=Me, R′=Me). An X-ray analysis of complex 2d revealed that an intramolecular N–H⋯Cl hydrogen bond [N(2)⋯Cl(1)=3.29(2) Å] helps to stabilise the monodentate co-ordination mode. The chloride ligand can be abstracted from complex 2d by treatment with TlPF₆, and this reaction led to formation of [Pt(dppe){SC(NHMe)NHNMe₂-S,N}](PF₆)₂ 3d. Reaction of [PtCl₂(dppe)] with unsubstituted thiosemicarbazide NH₂C(S)NHNH₂ in the presence of NH₄PF₆ resulted in a mixture of products containing mono- and bidentate co-ordinated ligands, [PtCl(dppe){SC(NH₂)NHNH₂-S}](PF₆) 2e and [Pt(dppe){SC(NH₂)NHNH₂-S,N}](PF₆)₂ 3e. [PtCl₂(dppe)] also reacts with two equivalents of NHMeC(S)NHNMe₂ in the presence of NH₄PF₆ to yield [Pt(dppe){SC(NHMe)NHNMe₂-S}₂](PF₆)₂ 1d, in which the thiosemicarbazide is acting as an S-donor, directly analogous to the thiourea ligands in complexes 1a–c.     

New triosmium metal clusters derived from the reactions between [Os3(CO)10(NCMe)2] and amides

Triosmium clusters of the type [Os₃(CO)₁₀(μ-H)(NHCOR)] (1; R = H, Me, Ph, Et or Pr) are formed in high yields form the reaction of [Os₃(CO)₁₀(NCMe)₂] (2) with amides. The nature of the products formed from thermolysis of 1 depend on the group, R.     

Übergangsmetall-Carbin-Komplexe: CIII. Aktivierung von Ethylisocyanid an elektronenreichen Metallzentren; Synthese von einkernigen Wolfram-Aminocarbin-Komplexen des Typs Tp′(CO)2 WCN(R)Et (R  Me,Et)

A large-scale, high-yield synthesis of the aminocarbyne complexes Tp′(CO)₂WCN(R)Et (5: R  Me; 6: R  Et) [Tp′ = hydridotris(3,5-dimethylpyrazol-1-yl)borate] is reported, starting from Tp′W(CO)₃I (2). The first step of the synthetic procedure involves thermal decarbonylation of 2 with EtNC to give cis-Tp′W(CO)₂(CNEt)I (3). Complex 3 is then reduced with Na/Hg to give the metallate Na[Tp′W(CO)₂(CNEt)] (4). Finally, complex 4 is alkylated with RI (R  Me, Et) exclusively at the isocyanide nitrogen to give the aminocarbyne complexes 5 and 6. In contrast, the metallates Na[(η⁵-C₅R′₅)W(CO)₂(CNEt)] (R′  H, Me) undergo alkylation with RI at the metal centre to afford the W^II alkyl complexes cis/trans-(η-C₅R′₅)W(CO)₂(CNEt)R. This difference in reactivity is ascribed to the steric demands of the Tp′ ligand, which shields the metal centre from the incoming electrophile.     

Convenient,high yield syntheses of [Nb(O)Cl3], [Nb(O)Cl3(CH3CN)2] and [NB(O)Cl3(THF)2]. Formation and decomposition of intermediate alkoxo (and siloxo) derivatives of general formula [NbCl4(OR)]2 (R = Me,Et, SiMe3)

Trimethylsilylaklylethers, Me₃SiOR (R = Me, Et) and hexamethyldisiloxane react with NbCl₅ in dichloromethane under ambient conditions to give readily isolable mono-alkoxides, [NbCl₄(OR)]₂ (R = Me, 1; Et, 2) and the thermally sensitive siloxide [NbCl₄(OSiMe ₃)]₂ (3), respectively. At 80°C in 1,2-dichloroethane, 1–3 undergo efficient conversion to [Nb(O)Cl₃] with elimination of RCl. In acetonitrile solution, the reaction of NbCl₅ with (Me₃Si)₂O proceeds smoothly to give [Nb(O)Cl₃(CH₃CN)₂] which is readily converted to [Nb(O)Cl₃(THF)₂] upon dissolution in tetrahydrofuran (THF).     

Rutaceous constituents—13: A biomimetic synthesis of acronycine

A biomimetic synthesis of the anti-tumor active alkaloid acronycine (7; R=R'=Me) has been obtained by cyclisationof 6-(2-methylaminobenzoyl)-5,7-dimethoxy-2.2-dimethylchromene (11 : R=R'=Me); isoacronycine (20; R=R'=Me) was also produced. In an analogous manner the aminochromene (11 ; R=H. R'=Me) gave a mixture of des-N-methylacronycinc (7; R=H, R$\text{=}\text{?}$Me) and des-N-methylisoacronycine (20; R=H, R'=Me). The aminochromenes were best synthesised by condensation of lithio-5,7-dimethoxy-2,2-irnethylchromene (22; R=Li) with N-methylisatoic anhydride (26) or with 2-methyl-3.1-benzoxazm-4-one (21).The relevance of this synthetic route to the biogenesis of acridone alkaloids is discussed.     

Synthesis of some sulfur-containing spiro-pyrimidinetriones,pyrazolidinediones, and isoxazolidinediones

Novel sulfur-containing spiro compounds such as 7,11-diaryl-9-thia-2,4-diazaspiro [5,5] undecane-1,3,5-trione 9,9-dioxides ( 2 ), 6,10-diaryl-8-thia-2,3-diazas-piro[4,5]decane-1,4-dione-8,8-dioxides ( 3 ) and 6,10-diaryl-2-oxo-8-thia-3-azaspiro [4,5] decane-1,4-dione-8,8-dioxides ( 5 ) have been prepared by the condensation of 4-dimethoxycarbonyl/diethoxycarbonyl-3,5-diaryl-1-thiane 1,1-dioxides ( 1 ) with urea, hydrazine hydrate, and hydroxylamine hydrochloride, respectively. The N-substituted derivatives ( 4 and 6 ) of 3 and 5 have also been prepared by acylation and nitrosation. The structures of 2, 3 , and 5 were established by IR, ¹H NMR, and ¹³C NMR spectral studies, respectively.     

Reactivity of [trans-R2MoO(NNPhR′)(o-phen)] toward R′PhNNH2 and R′PhNNH3+Cl−, R=Me,Ph and R′=Me,Ph. X-ray structure of [trans-MeClMoO(NNPh2)(o-phen)]

The reactivities of [trans-R₂MoO(NNPhR′)(o-phen)], R=R′=Me (1); R=Me, R′=Ph (2); R=Ph, R′=Me (3); R=R′=Ph (4), toward (i) neutral 1,1-disubstituted hydrazines, R′PhNNH₂ and (ii) 1,1-disubstituted hydrazine hydrochlorides, R′PhNNH₂·HCl, R′=Me, Ph, were studied in acetonitrile. In the first case, no condensation reaction of the free oxo group was observed under different experimental conditions. In the second case, using a 1:1 precursor/hydrazine hydrochloride molar ratio, the oxo group was also unreactive, instead one methyl or phenyl group bonded to molybdenum was displaced as methane or benzene and was subsequently substituted by one chloride ligand affording complexes formulated as [trans-RClMoO(NNPhR′)(o-phen)], R=R′=Me (5); R=Me, R′=Ph (6); R=Ph, R′=Me, (7)·MeCN; R=R′=Ph, (8)·MeCN. Finally, when a 1:2 precursor/hydrazine hydrochloride molar ratio was used, both methyl and phenyl groups were substituted affording complexes formulated as [trans-Cl₂MoO(NNPhR′)(o-phen)], R′=Me (9), R=Ph (10). The new organometallic compounds were characterised by IR, UV–Vis and ¹H NMR spectroscopy while the crystal and molecular structure of 6 was determined by X-ray diffraction analysis.     

Chemistry of the phosphinidene oxide ligand

Reaction of [Mo2Cp2(mu-H)(mu-PHR*)(CO)4] with DBU followed by O2 gives the first anionic phosphinidene oxide complex (H-DBU)[MoCp{P(O)R*}(CO)2] (1) (DBU = 1,8-diazabicyclo [5.4.0] undec-7-ene; R* = 2,4,6-C6H2tBu3). This anion displays three different nucleophilic sites located at the O, P, and Mo atoms, as illustrated by the reactions reported. Thus, reaction of 1 with excess HBF4.OEt2 gave the fluorophosphide complex [MoCp(PFR*)(CO)2] via the hidroxophosphide intermediate [MoCp{PR*(OH)}(CO)2]. Related alkoxyphosphide compounds [MoCp{P(OR)R*}(CO)2] (R = Me, C(O)Ph) were prepared by reaction of 1 with [Me3O]BF4 and PhC(O)Cl, respectively, whereas reaction of 1 with MeI or C3H5Br gave the P,O-bound phosphinite complexes [MoCp(kappa2-OPRR*)(CO)2] (R = Me, C3H5). Metal-based electrophiles were found to bind at either O or Mo positions. Thus, reaction of 1 with [ZrCl2Cp2] gave the phosphinidene oxide bridged [MoCp{P(OZrClCp2)R*}(CO)2], whereas reaction with SnPh3Cl gave trans-[MoCp{P(O)R*}(CO)2(SnPh3)], an heterometallic complex having an intact terminal P(O)R* ligand.     

Soft Scorpionate Hydridotris(2-mercapto-1-methylimidazolyl) borate) Tungsten-Oxido and -Sulfido Complexes as Acetylene Hydratase Models

A series of W^IV alkyne complexes with the sulfur-rich ligand hydridotris(2-mercapto-1-methylimidazolyl) borate) (Tm^Me) are presented as bio-inspired models to elucidate the mechanism of the tungstoenzyme acetylene hydratase (AH). The mono- and/or bis-alkyne precursors were reacted with NaTm^Me and the resulting complexes [W(CO)(C₂R₂)(Tm^Me)Br] (R=H 1 , Me 2 ) oxidized to the target [WE(C₂R₂)(Tm^Me)Br] (E=O, R=H 4 , Me 5 ; E=S, R=H 6 , Me 7 ) using pyridine-N-oxide and methylthiirane. Halide abstraction with TlOTf in MeCN gave the cationic complexes [WE(C₂R₂)(MeCN)(Tm^Me)](OTf) (E=CO, R=H 10 , Me 11 ; E=O, R=H 12 , Me 13 ; E=S, R=H 14 , Me 15 ). Without MeCN, dinuclear complexes [W₂O(μ-O)(C₂Me₂)₂(Tm^Me)₂](OTf)₂ ( 8 ) and [W₂(μ-S)₂(C₂Me₂)(Tm^Me)₂](OTf)₂ ( 9 ) could be isolated showing distinct differences between the oxido and sulfido system with the latter exhibiting only one molecule of C₂Me₂. This provides evidence that a fine balance of the softness at W is important for acetylene coordination. Upon dissolving complex 8 in acetonitrile complex 13 is reconstituted in contrast to 9 . All complexes exhibit the desired stability toward water and the observed effective coordination of the scorpionate ligand avoids decomposition to disulfide, an often-occurring reaction in sulfur ligand chemistry. Hence, the data presented here point toward a mechanism with a direct coordination of acetylene in the active site and provide the basis for further model chemistry for acetylene hydratase.     

Chemistry of Fischer-type rhenacyclobutadiene complexes. II. Reactions with alkynes and sulfonium ylides, and rearrangements induced by nitriles and pyridine

Further investigations into the chemistry of the rhenacyclobutadiene complexes (CO)₄Re(η²-C(R)C(CO₂Me)C(X)) (1: R=Me, X=OEt (1a), O(CH₂)₃CCH (1b), NEt₂ (1c); R=CHEt₂, X=OEt (1d); R=Ph, X=OEt (1e)) are reported. Reactions of 1 with alkynes at reflux temperature of toluene and at ambient temperature either under photochemical conditions or in the presence of PdO yield ring-substituted η⁵-cyclopentadienylrhenium tricarbonyl complexes, 2. The symmetrical alkynes R^′CCR^′ (R^′=Ph, Me, CO₂Me) afford the pentasubstituted complexes (η⁵-C₅(Me)(CO₂Me)(OEt)(Ph)(Ph))Re(CO)₃ (2d), (η⁵-C₅(Me)(CO₂Me)(OEt)(Me)(Me))Re(CO)₃ (2e), (η⁵-C₅(Me)(CO₂Me)(OEt)(CO₂Me)(CO₂Me))Re(CO)₃ (2f), and (η⁵-C₅(Me)(CO₂Me)(NEt₂)(CO₂Me)(CO₂Me))Re(CO)₃ (2i) on reaction with the appropriate 1, whereas the unsymmetrical alkynes R^′CCR″ (R^′=Ph; R″=H, Me) give either only one, (η⁵-C₅(Me)(CO₂Me)(OEt)(Ph)H)Re(CO)₃ (2a)), or both, (η⁵-C₅(Me)(CO₂Me) (OEt)(Ph)(Me))Re(CO)₃ (2b) and (η⁵-C₅(Me)(CO₂Me)(OEt)(Me)(Ph))Re(CO)₃ (2c), (η⁵-C₅(Ph)(CO₂Me)(OEt)(Ph)H)Re(CO)₃ (2g) and (η⁵-C₅(Ph)(CO₂Me)(OEt)(H)(Ph))Re(CO)₃ (2h), of the possible products of [3 + 2] cycloaddition of alkyne to η²-C(R)C(CO₂Me)C(X). Thermolysis of (CO)₄Re(η²-C(Me)C(CO₂Me)C(O(CH₂)₃CCH)) (1b) containing a pendant alkynyl group proceeds to (η⁵-C₅(Me)(CO₂Me)(O(CH₂)₃)H)Re(CO)₃ (2j), a η⁵-cyclopentadienyl-dihydropyran fused-ring product. Competition experiments showed that each of PhCCH and MeO₂CCCCO₂Me reacts faster than PhCCPh with 1a. The results with unsymmetrical alkynes are rationalized by steric properties of substituents at the CC and ReC bonds and by a preference of ReC(Me) over ReC(OEt) to undergo alkyne insertion. A mechanism is proposed that involves substitution of a trans CO by alkyne in 1, insertion of alkyne into ReC bond to give a rhenabenzene intermediate, and collapse of the latter to 2. Complexes 1a and 1d undergo rearrangement in MeCN at reflux temperature to give rhenafuran-like products, (CO)₄Re(κ²-OC(OMe)C(CHCR₂)C(OEt)) (R=H (3a) or Et (3b)). The reaction of 1d also proceeds in EtCN, PhCN, and t-BuCN at comparable temperature, but is slower (especially in t-BuCN) than in MeCN. In pyridine at reflux temperature, 1a undergoes a similar rearrangement, with CO substitution, to give (CO)₃(py)Re(κ²-OC(OMe)C(CHCEt₂)C(OEt)) (4). A mechanism is proposed for these reactions. The sulfonium ylides Me₂SCHC(O)Ph and Me₂SC(CN)₂ (Me₂SCRR^′) react with 1a in acetonitrile at reflux temperature by nucleophilic addition of the ylide to the ReC(Me) carbon, loss of Me₂S, and rearrangement to a rhenafuran-type structure to yield (CO)₄Re(κ²-OC(OMe)C(C(Me)CRR^′)C(OEt)) (R=H, R^′=C(O)Ph (5a); R=R^′CN (5b)). All new compounds were characterized by a combination of elemental analysis, mass spectrometry, and IR and NMR spectroscopy.     

Metallacumulenylidene complexes in the [(η5-C5Me5)(η2-dppe)Fe(=C(=C)nR2)]X (n = 0, 1, 2) series: investigations of the iron-carbon bonding by Mössbauer spectroscopy and X-ray analyses

The synthesis of the iron allenylidene complexes [(η⁵-C₅Me₅)(η²-dppe)Fe(=C=C=C(Ph)Ph)][X] (5a, X = PF₆, 95%; 5b, X = BPh₄, 91%; dppe = 1,2-bis(diphenylphosphino)ethane) was achieved by reacting the complex (η⁵-C₅Me₅)(η²-dppe)FeCl (10) with 1 equiv of 1,1-diphenyl-prop-2-yn-1-ol in methanol in the presence of KPF₆ or NaBPh₄. Surprisingly, when the reaction was carried out in the presence of the tetraphenylborate anion, the final product contained both 5b and the hydroxyvinylidene [(η⁵-C₅Me₅)(η²-dppe)Fe(=C=C(H)C(OH)(Ph)₂)][BPh₄] (14b) in the 1:1 ratio. Further treatment of the mixture with Amberlyst 15 in methanol provided the allenylidene 5b as a pure sample. The allenylidene complexes [(η⁵-C₅Me₅)(η²-dppe)Fe(=C=C=C(Me)Ph)][PF₆] (6) and [(η⁵-C₅Me₅)(η²-dppe)Fe(=C=C=C(Me)Et)][PF₆] (7) were prepared according to the same procedure and they were isolated as purple powders in 90% yield. The X-ray crystal structures were determined for the vinylidene complexes [(η⁵-C₅Me₅)(η²-dppe)Fe(=C=CH₂)][PF₆] (3) and [(η⁵-C₅Me₅)(η²-dppe)Fe(=C=C(Ph)H)][PF₆] (4), and the allenylidene derivative 5a. In the homogeneous series of complexes [(η⁵-C₅Me₅)(η²-dppe)Fe(=(C)_n(R)R’)][PF₆], (n = 1, R = H, R′ = Me, X = PF₆, 1; n =1, R = H, R’ = OMe, X = PF₆, 2a; n = 1, R = H, R’ = OMe, X = CF₃OSO₂, 2b; n = 2, R = R′ = H, X = PF₆, 3; n = 2, R = H, R′ = Ph, X = PF₆, 4; n = 3, R = R′ = Ph, X = PF₆, 5a; n = 3, R = R′ = Ph, X = BPh₄, 5b; n = 3, R = Me, R′ = Ph, X = PF₆, 6; n = 3, R = Me, R′ = Et, X = PF₆, 7; n = 3, R = Me, R′ = OMe, X = BPh₄, 8), an empiric relationship between the Mössbauer parameters, δ and QS, was found. This observation would indicate that the positive charge on the iron nucleus decreases with the Fe=C bond order. Moreover, in this series of iron cumulenylidene derivatives, comparison of the variation of the metal–carbon bond distances determined by X-ray analyses with the Mössbauer QS values allows the observation of a linear correlation (R = 0.99). To cite this article: G. Argouarch et al., C. R. Chimie 6 (2003).     

Reaktionen von metall-koordiniertem kohlenmonoxid mit yliden: XVII. Darstellung eines molybdän- und wolframkomplexes mit η3-gebundenem trimethylsiloxybutenon-liganden durch silylierung der phosphonium-metall-enolat-vorstufe

The reaction of the phosphonium metallates Me₄P[C₅R₅(CO)(Me₃P)$\text{MC(O)=CHC(O}$)R′] (M = W, R = H, R′ = Et (1a); M = Mo, R = Me, R′ = Me (1b)) with the silylating reagent Me₃SiOSO₂CF₃ yields the neutral complexes C₅R₅(CO)(Me₃P)$\text{MC(OSiMe}{}_3\text{)=CHC(O}$)R (2a, 2b) bearing a chelating O(2), C(4)-trimethylsiloxybutenone ligand. The structure of the new compounds is established by the IR, ¹H and ³¹P NMR spectra.     

Reactions of a phosphido-bridged unsymmetrical diiron complex (η-C5Me5)Fe2(CO)4(μ-CO)(μ-PPh2) with various alkynes

A phosphido-bridged unsymmetrical diiron complex (η⁵-C₅Me₅)Fe₂(CO)₄(μ-CO)(μ-PPh₂) (1) was synthesized by a new convenient method; photo-dissociation of a CO ligand from (η⁵-C₅Me₅)Fe₂(CO)₆(μ-PPh₂) (2) that was prepared by the reaction of Li[Fe(CO)₄PPh₂] with (η⁵-C₅Me₅)Fe(CO)₂I. The reactivity of 1 toward various alkynes was studied. The reaction of 1 with ^tBuCCH gave a 1:1 mixture of two isomeric complexes (η⁵-C₅Me₅)Fe₂(CO)₃(μ-PPh₂)[μ-CHC(^tBu)C(O)] (3) containing a ketoalkenyl ligand. The reactions of 1 with other terminal alkynes RCCH (R=H, CO₂Me, Ph) afforded complexes incorporating one or two molecules of alkynes and a carbonyl group. The principal products were dinuclear complexes bridged by a new phosphinoketoalkenyl ligand, (η⁵-C₅Me₅)Fe₂(CO)₃(μ-CO)[μ-CR¹CR²C(O)PPh₂] (4a: R¹=H, R²=H; 4b: R¹=CO₂Me, R²=H; 4c: R¹=H, R²=Ph). In the cases of alkynes RCCH (R=H, CO₂Me), dinuclear complexes having a new ligand composed of two molecules of alkynes, a carbonyl group, and a phosphido group; i.e. (η⁵-C₅Me₅)Fe₂(CO)₃[μ-CRCHCHCRC(O)PPh₂] (5a: R=H; 5b: R=CO₂Me), were also obtained. In all cases, mononuclear complexes, (η⁵-C₅Me₅)Fe(CO)[CR¹CR²C(O)PPh₂] (6a: R¹=H, R²=H; 6b: R¹=H, R²=CO₂Me; 6c: R¹=H, R²=Ph) were isolated in low yields. The structures of 1, 4c, 5b, and 6a were confirmed by X-ray crystallography. The detailed structures of the products and plausible reaction mechanisms are discussed.     

Preparation and reactions of tetrahedrane-type clusters containing a SCoFeM (M=Mo or W) core. The single crystal X-ray structure of the cluster (μ3-S)CoFeMo(CO)8[η5-C5H4C(O)CH2CH2CO2Me]

Treatment of the monoanions {M(CO)₃[η⁵-C₅H₄C(O)CH₂CH₂CO₂Me]}⁻ with FeCo₂(CO)₉(μ₃-S) in refluxing THF gave the novel cluster complexes (μ₃-S)CoFeM(CO)₈[η⁵-C₅H₄C(O)CH₂CH₂CO₂Me] (M=Mo, 1; M=W, 2). Reactions of the cluster (μ₃-S)CoFeMo(CO)₈[η⁵-C₅H₄C(O)Me] (3) with amine derivatives 2,4-dinitrophenylhydrazine, thiosemicarbazide, (−)-5-(α-phenyl)semioxamazide and l-(+)-menthydrazide respectively at room temperature yielded four new hydrazone cluster complexes (μ₃-S)CoFeMo(CO)₈[η⁵-C₅H₄C(NR)Me] [4–7, R=NHC₆H₃-2,4-(NO₂)₂, NHC(S)NH₂, NHC(O)C(O)NHCH(Me)(C₆H₅) and NHCO₂(menthyl)]. However, cluster 1 only reacted with 2,4-dinitrophenylhydrazine to give the cluster (μ₃-S)CoFeMo(CO)₈[η⁵-C₅H₄C(NR)Me] [8, R=NHC₆H₃-2,4-(NO₂)₂] under the same conditions. Although two kinds of optically active groups have been attached to the racemic cluster, the mixture of diastereoisomers produced cannot be separated chromatographically. The ¹³C NMR showed the presence of the diastereoisomers of clusters 5 and 6. Cluster 1 has been solved by single-crystal X-ray diffraction.     

Insertions of nitriles and pyridine into the ZrSi bond of (η5-C5H5)(η5-C5Me5)Zr[Si(SiMe3)3]Me

The zirconium silyl complex CpCpZr[Si(SiMe₃)₃]Me (1; Cp = η⁵-C₅H₅; Cp = η⁵-C₅Me₅) reacts with nitriles RCN (R = Me, CHCH₂, Ph) to form the azomethine derivatives CpCpZr[NC(R)Si(SiMe₃)₃]Me (2, R = Me; 3, R = CHCH₂; 4, R = Ph). Pyridine reacts with 1 to give a 75% yield of CpCpZr[NC₅H₅Si(SiMe₃)₃]Me (5), which results from 1,2-addition of the ZrSi bond of 1 to pyridine. These reactions provide the first examples of nitrile and pyridine insertions into a transition metal-silicon bond. The related silyl complexes Cp₂Zr[Si(SiMe₃)₃]Me and CpCpZr[Si(SiMe₃)₃]Cl are much less reactive toward nitriles and pyridine.