The chemisorption of N2 on the (110) surface of iridium

The molecular chemisorption of N₂ on the reconstructed Ir(110)-(1 × 2) surface has been studied with thermal desorption mass spectrometry, XPS, UPS, AES, LEED and the co-adsorption of N₂ with hydrogen. Photoelectron spectroscopy shows molecular levels of N₂ at 8.0 (5σ + 1π) and 11.8 (4σ) eV in the valence band and at 399.2 eV with a satellite at 404.2 eV in the N(1s) region, where the binding energies are referenced to the Ir Fermi level. The kinetics of adsorption and desorption show that both precursor kinetics and interadsorbate interactions are important for this chemisorption system. Adsorption occurs with a constant probability of adsorption of unity up to saturation coverage (4.8 × 10¹⁴ cm^?2), and the thermal desorption spectra give rise to two peaks. The activation energy for desorption varies between 8.5 and 6.0 kcal mole^?1 at low and high coverages, respectively. Results of the co-adsorption of N₂ and hydrogen indicate that adsorbed N₂ resides in the missing-row troughs on the reconstructed surface. Nitrogen is displaced by hydrogen, and the most tightly bound state of hydrogen blocks virtually all N₂ adsorption. A p1g1(2 × 2) LEED pattern is associated with a saturated overlayer of adsorbed N₂ on Ir(110)-(1 × 2).     

Infrared spectra for co isotopes chemisorbed on Pt “111”: Evidence for strong absorbate coupling interactions

Previous results for ¹²C¹⁶O chemisorbed on a Pt“111” recrystallised ribbon revealed that the infrared absorption band due to the CO stretch appears at low coverages at 2063 cm^?1 and shifts to ~2100 cm^?1 at saturation coverage at 300 K. The cause of this shift is studied in the present work, by investigating the vibrational spectra from a variety of mixtures of ¹²C¹⁶O and ¹²C¹⁶O. The results show that there is a strong dipole-dipole coupling interaction between adsorbate molecules in the overlayer, and provide conclusive evidence that the 35 cm^?1 frequency shift observed with increasing coverage for ¹²C¹⁶O is attributable to coupling.     

The Pt(110) phase transitions: A study by rutherford backscattering,nuclear microanalysis,LEED and thermal desorption spectroscopy

The adsorbate induced (1×2) (1×1) (2×1)p1g1 phase transitions on Pt(110) have been studied by Rutherford backscattering (RBS), nuclear microanalysis (NMA), LEED and thermal desorption spectroscopy. RBS data indicate that any displacement of the surface atoms from their expected bulk-like lattice sites in the (1×2) phase is ? 0.002 nm laterally and ? 0.007 nm vertically. This contraint eliminates models for the reconstruction which involve significant lateral displacements (e.g., the paired-atom or hexagonal overlayer models). The RBS data are consistent with both the rumpled model with up/down displacements not exceeding ~0.007 nm and the missing row model with an unrelaxed surface in which the out-of-plane vibrational amplitude is slightly enhanced. A c(8×4) phase, produced by CO (or NO) exposure at T?250 K, has also been characterized by RBS which demonstrated that 0.92×10¹⁵ Pt cm^?2 move on average by ~0.017 nm laterally out-of-registry with the bulk upon formation of this phase. The values of the saturation adsorbate coverages at T?200K were determined by NMA to be 0.92 ± 0.05×10¹⁵, 1.0 ± 0.06×10¹⁵ and 1.07 ± 0.10×10¹⁵ CO molecules, NO molecules and D atoms, respectively, per cm². The value of the saturation coverage by CO (θ = 1.0) supports recent models of the (2×1)p1g1 overlayer. The isosteric heat of adsorption of CO is 160 ± 15 kJ mol^?1 in the range 0.2?θ?0.5.     

Adsorption of nitrogen on platinum

The adsorption and desorption of nitrogen on a platinum filament have been studied by thermal desorption techniques. Nitrogen adsorption becomes significant only after any carbon contamination is removed from the surface by heating the platinum filament in oxygen, and after the CO content in the background gas is reduced substantially. At room temperature nitrogen populates an atomic tightly bound β-state, E^≠ = 19 kcal mole^?1. The saturation coverage of the (3-state is 4.5 × 10¹⁴ atoms cm^?2. Formation of the (β-state is a zero order process in the pressure range studied. At 90 K two additional α₁- and α₂-desorption peaks are observed. The activation energy for desorption for the α₂-state is 7.4 kcal mole^?1 at low coverage decreasing to 3 kcal mole^?1 at saturation of this state, 6 × 10 molecules cm^?2. The maximum total coverage in the α-states was 1.2 × 10¹⁵ molecules cm^?2. A replacement process between the β- and α-states has been observed where each atom in the (β-state excludes two molecules from the α-state.     

Structural and reactive properties at the metal-halogen interface: The interaction of bromine with chromium (110)

The chemisorption and subsequent reaction of bromine on Cr(110 has been studied by Auger spectroscopy, LEED, Δφ, and thermal desorption measurements. For gas doses of < 7.5 × 10¹⁸ molecules m^?2, very efficient dissociative chemisorption leads to a series of well-ordered, out-of-registry compression structures. Uniquely, however, the overlayer falls back into registry at saturation coverage; at this point the appearance of glide symmetry indicates that the three-fold coordinated adsorption sites are occupied exclusively. Bromine → metal charge transfer occurs during adsorption (in contrast to Cr(100)). On raising the temperature at low coverages, the surface phase decomposes by evaporation as CrBr molecules; at higher coverages the desorption product switches to CrBr₂. Continuous growth of bulk CrBr₂ sets in at high gas exposures, this corrosion reaction proceeding at a rate which is ten times slower than the rate of overlayer formation. The chromium dibromide layer also evaporates as CrBr₂(g). Structural relationships with related metal-halogen systems are discussed.     

The adsorption of CO on evaporated iridium films,studied with infrared reflection-absorption spectroscopy

The adsorption of ^12CO on Ir films evaporated under ultrahigh vacuum (UHV) conditions was studied using infrared reflection-absorption spectroscopy (IRAS). Only a single absorption band was observed at 300 K, shifting continuously from the “singleton” value ~2010 cm^?1 at very low coverages to 2093 cm^?1 at saturation coverage. This band is attributed to CO adsorbed on top of the surface atoms. Synchronously with this shift the bandwidth at half maximum intensity $\text{Δv}{}_{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ decreases from ~30 to 8 cm^?1. The integrated peak area increases linearly with coverage up to a relative coverage (θ_r) of approximately 0.4, then the increase levels off and a maximum is observed. Upon continuing adsorption the intensity decreases slightly. In addition results are presented on adsorption at 300 K of ¹²CO?¹³CO isotopic mixtures. The coverage induced frequency shift is discussed in terms of a dipole-dipole coupling mechanism and it is concluded that intermolecular coupling can explain the shift (~83 cm^?1) observed. The decrease in intensity at coverages > 0.4 is attributed to the formation of a compressed overlayer with part of the CO molecules adsorbed in a multicentre position with different spectral properties. No infrared bands of nitrogen adsorbed at 78 K could be detected at pressures up to 6.7 kPa (1 Pa = 0.0075 Torr, 1 Torr = 133.32 Pa).     

The adsorption of CO on Cu(110)

The adsorption of CO on Cu(110) has been studied by LEED, surface potentials and infrared spectroscopy. With increasing surface coverage the s.p. passes through a maximum value of 0.29 V and than falls to 0.17 V at saturation. The heat of adsorption is nearly constant (~55 kJ mol^?1) up to the maximum s.p. but then falls rapidly. A ( 2× 1) structure is formed near the s.p. maximum, followed by a structure which is compressed in the [11?0] direction and poorly ordered in the [001] direction but tending towards c(1.3 × 2). At low coverage two infrared bands appear at 2088 and 2104 cm^?1; their relative intensity is similar at 77, 195 and 295 K. As the coverage increases, the bands shift in frequency and merge into a single band at 2094 cm^?1. The origin of the two bands is discussed in relation to the overlayer structure. Strong interaction between CO molecules is shown by the spectra of mixtures of ¹³CO and ¹²CO.     

Adsorption of oxygen on Pt(111)

Oxygen adsorbed on Pt(111) has been studied by means of temperature programmed thermal desorption spectroscopy (TPDS). high resolution electron energy loss spectroscopy (EELS) and LEED. At about 100 K oxygen is found to be adsorbed in a molecular form with the axis of the molecule parallel to the surface as a peroxo-like species, that is, the OO bond order is about 1. At saturation coverage (θ_mol= 0.44) a $\text{(}\text{3}\text{2}\text{×}\text{3}\text{2}\text{)R15°}$ diffraction pattern is observed. The sticking probability S at 100 K as a function of coverage passes through a maximum at θ = 0.11 with S = 0.68. The shape of the coverage dependence is characteristic for adsorption in islands. Two coexisting types of adsorbed oxygen molecules with different OO stretching vibrations are distinguished. At higher coverages units with v-OO = 875 cm^?1 are dominant. With decreasing oxygen coverages the concentration of a type with v-OO = 700 cm^?1 is increased. The dissociation energy of the OO bond in the speices with v-OO = 875 cm^?1 is estimated from the frequency shift of the first overtone to be ~ 0.5 eV. When the sample is annealed oxygen partially desorbs at ~ 160K, partially dissociates and orders into a p(2×2) overlayer. Below saturation coverage of molecular oxygen, dissociation takes place already at92 K. Atomically adsorbed oxygen occupies threefold hollow sites, with a fundamental stretching frequency of 480 cm^?1. In the non-fundamental spectrum of atomic oxygen the overtone of the E-type vibration is observed, which is “dipole forbidden” as a fundamental in EELS.     

Absolute coverages of CO and O on Pt(111); Comparison of saturation CO coverages on Pt(100), (110) and (111) surfaces

Nuclear microanalysis (NMA) has been used to determine the absolute coverages of oxygen and CO adsorbed on Pt(111). The saturation oxygen coverage at 300 K is 3.9 ± 0.4 × 10¹⁴ O atoms cm^?2 (θ = 0.26 ± 0.03), confirming the assignment of the LEED pattern as p(2 × 2). The saturation CO coverage at 300 K is 7.4 ± 0.3 × 10¹⁴ CO cm^?2 (θ = 0.49 ± 0.02). The low temperature saturation CO coverages on Pt(100), (110) and (111) surfaces are compared.     

High-resolution electron energy-loss spectroscopy of CO on an Ni(110) surface

High-resolution vibrational electron energy-loss spectra of CO on an Ni(110) surface were studied at 300 K with the in-situ combination of LEED, Auger electron spectroscopy and work-function change measurement. The observed peaks are at 436 cm^?1, 1855 cm^?1 (shifting to 1944 cm^?1 with increasing coverage) and at 1960 cm^?1 (shifting to 2016 cm^?1 with increasing coverage). The experimental results indicate that CO is adsorbed non-dissociatively at all coverages. Three adsorbed states of CO have been found. At fractional CO coverages less than θ ~ 0.9 where the disordered adsorbed structure dominates, CO is adsorbed in two inequivalent sites (short- and long-bridge sites) at random with its axis oriented perpendicular to the surface. At high coverages (θ > 0.9) where the (2 × 1) structure develops, our results indicate that the adsorbed CO molecules may occupy the distorted long-bridge sites forming zig-zag chains which lie essentially in the troughs of the (110) surface.     

Adsorption von wasserstoff an platin: II. Adsorptionsentropien

Differential and integral molar entropies of the adsorbed layer are calculated from the dependence of the coverage on pressure and temperature published in part I. The experimental entropies correspond up to coverages of 2 × 10¹⁴ molecules cm^?2 with entropies of the localized adsorption and an additional vibration entropy of about 20 cal deg^?1 mole^?1 caused by vibrations of the adsorbed atoms in the order of magnitude of 10¹² sec^?1. At higher coverages the entropy increases and passes through a maximum. This is explained by the formation of a second adsorption state (γ state) probably consisting of molecular hydrogen.     

Interaction of cesium and oxygen on W(110): I. Cesium adsorption on oxygenated and oxidized W(110)

Cesium adsorption on oxygenated and oxidized W(110) is studied by Auger electron spectroscopy, LEED, thermal desorption and work function measurements. For oxygen coverages up to 1.5 × 10¹⁵ cm^?2 (oxygenated surface), preadsorbed oxygen lowers the cesiated work function minimum, the lowest (～1 eV) being obtained on a two-dimensional oxide structure with 1.4 × 10¹⁵ oxygen atoms per cm². Thermal desorption spectra of neutral cesium show that the oxygen adlayer increases the cesium desorption energy in the limit of small cesium coverages, by the same amount as it increases the substrate work function. Cesium adsorption destroys the p(2 × 1) and p(2 × 2) oxygen structures, but the 2D-oxide structure is left nearly unchanged. Beyond 1.5 × 10¹⁵ cm^?2 (oxidized surface), the work function minimum rises very rapidly with the oxygen coverage, as tungsten oxides begin to form. On bulk tungsten oxide layers, cesium appears to diffuse into the oxide, possibly forming a cesium tungsten bronze, characterized by a new desorption state. The thermal stability of the 2D-oxide structure on W(110) and the facetting of less dense tungsten planes suggest a way to achieve stable low work functions of interest in thermionic energy conversion applications.     

The adsorption of acetylene on W(100) at room temperature: An electron spectroscopic study

The adsorption of acetylene on W(100) at room temperature has been studied by AES, ELS, thermal desorption, mass spectrometry, work function and LEED in one vacuum chamber. AES line profile analysis shows that there are at least two adsorption processes occurring at room temperature. Further, it is possible to explain all the AES results by assuming non-sequential adsorption into just two states, denoted by α and β. This picture was substantiated and embellished by comparison with other standard surface techniques. The α-state comprises either a C₂H₂ unit with an activation energy for desorption of $\text{2.3}\text{eV}\text{molecule}\text{(53}\text{kcal mole}{}^{\mathrm{?1}}\text{)}$ or CH units bounded through the carbon of the β-state. Saturation coverage for the α-state is 3 × 10¹⁴ molecules cm^?2. The β-state is dissociative at low acetylene exposures and comparison between a carbon covered surface and the β-state suggest the latter to be dissociative up to saturation. There also appears to be ca. 10¹⁴ hydrogen atoms cm^?2 on W(100) on room temperature acetylene saturation, the carbon content of the β-state being 9 × 10¹⁴ atoms cm^?2. The residual C?C bond from the molecule in the β-state remains unknown. No sign of ordering in the adsorbed species was detected, save the possibility of (1 × 1) in the β-state. Acetylene adsorption at 580 K showed hydrogen from the β-state to block acetylene adsorption by 15% at saturation. A two-site adsorption model for the β-state is proposed to explain the results. The α-state is bonded through the carbon of the β-state and it is speculated that the former adsorbs onto “β” domains where there is a critical minimum size for the latter.     

The chemisorption of Co on Rh(111)

The adsorption of CO on Rh(111) has been studied by thermal desorption mass spectrometry and low-energy electron diffraction (LEED). At temperatures below 180 K, CO adsorbs via a mobile precursor mechanism with sticking coefficient near unity. The activation energy for first-order CO desorption is 31.6 kcal/mole (ν_d = 10^13.6s^?1) in the limit of zero coverage.As CO coverage increases, a (√3 ×√3)R30^u overlayer is produced and then destroyed with subsequent formation of an overlayer yielding a (2 × 2) LEED pattern in the full coverage limit. These LEED observations allow the absolute assignment of the full CO coverage as 0.75 CO molecules per surface Rh atom. The limiting LEED behavior suggests that at full CO coverage two CO binding states are present together.     

The GaP(001) surface and the adsorption of Cs

GaP(001) cleaned by argon-ion bombardment and annealed at 500°C showed the Ga-stabilized GaP(001)(4 × 2) structure. Only treatment in 10^?5 Torr PH₃ at 500°C gave the P-stabilized GaP(001)(1 × 2) structure. The AES peak ratio $\text{P}\text{Ga}$ is 2 for the (4 × 2) and 3.5 for the (1 × 2) structure. Cs adsorbs with a sticking probability of unity up to 5 × 10¹⁴ Cs atoms cm^?2 and a lower one at higher coverages. The photoemission measured with uv light of 3660 Å showed a maximum at the coverage of 5 × 10¹⁴ atoms cm^?2. Cs adsorbs amorphously at room temperature, but heat treatment gives ordered structures, which are thought to be reconstructed GaP(001) structures induced by Cs. The LEED patterns showed the GaP(001)(1 × 2) Cs structure formed at 180°C for 10 h with a Cs coverage of 5 × 10¹⁴ atoms cm^?2, the GaP(001)(1 × 4) Cs formed at 210°C for 10 hours with a Cs coverage of 2.7 × 10¹⁴ atoms cm^?2, the GaP(001)(7 × 1) and the high temperature GaP(001)(1 × 4), the latter two with very low Cs content. Desorption measurements show three stability regions: (a) between 25–150°C for coverages greater than 5 × 10¹⁴ atoms cm^?2, and an activation energy of 1.2 eV; (b) between 180–200°C with a coverage of 5 × 10¹⁴ atoms cm^?2, and an activation energy of 1.8 eV; (c) between 210–400°C with a coverage of 2.7 × 10¹⁴ atoms cm^?2, and an activation energy of 2.5 eV.     

The adsorption of CO on the (100) plane of tungsten; thermal and work function measurements

Thermal desorption and work function measurements indicate that a largely molecular layer, with some dissociation, is formed at 80–100 K, with an increase in work function of 0.55 eV. The coverage in this layer is 11.5 × 10¹⁴ molecules/cm², or CO/W = 1.15. On heating, equal amounts of a β precursor, possibly dissociated, and a molecular α species are formed at ≈300 K, with abundances of 5 × 10¹⁴ molecules/cm² each. The α desorption is complete at 360 K. The β precursor evolves on heating without desorption in the range 400–700 K as indicated by work function decreases, to β-CO, which is almost certainly dissociated. This change occurs at lower temperatures for low coverages. Thermal desorption shows 3 peaks, which have been traditionally labelled β_{1, β2}, and β₃ at 930, 1070, and 1375 K. Of these only β₃ corresponds to a well defined state. Readsorption after heating to 950 or 1150 K results in a doubly peaked spectrum at 1070 and 1375 K. The β₁ and β₂ peaks obey complex desorption kinetics, probably corresponding to desorption and rearrangement. The coverage of β₃ is 2.5 × 10¹⁴ molecules/cm², suggesting that the c(2 × 2) LEED pattern corresponds to occupany of every other unit cell by a C or an O atom. For coverages ? 1.5 × 10¹⁴ molecules/cm² β₃ desorption obeys second order kinetics with an activation energy of 83 ± 3 kcal/mole. For β₃ the work function decreases from the clean W value by 0.1 eV, suggesting adsorption of C and O in the center of the W unit mesh, below the surface layer of W atoms. Readsorption on β and β precursor layers leads to formation of electropositive α-CO, with a multiply peaked thermal desorption spectrum, indicating the existence of different binding sites. Adsorption-heatingreadsorption, -heating-readsorption sequences indicate that additional changes in the α desorption spectrum occur, suggesting reconstruction in the β layer.     

Adsorption of potassium on iron

Adsorption of K on Fe(110), (100) and (111) surfaces was studied by means of LEED, AES, thermal desorption and work function measurements. The monolayer capacity is about 5.5 × 10¹⁴ K-atoms/cm² in all three cases. With Fe(111) an ordered 3 × 3 overlayer was found at fairly low coverages. The work function decreases to a minimum and the initial dipole moments were determined to μ₀ = 7.0 Debye for Fe(110), μ₀ = 4.4 Debye for K/Fe(100) and μ₀ = 3.9 Debye for K/Fe(111). The heat of adsorption decreases from its initial value (Fe(110): 57; Fe(100): 54; Fe(111): 52 kcal/mole) continuously with increasing coverage which parallels the continuous decrease of the dipole moment of the adsorbate complex.     

A leed and AES study of the adsorption of chlorine on W(100) at room temperature

The surface structures formed on room temperature adsorption of chlorine on W(100) and subsequent annealing of the saturated surface have been characterised by LEED. The progress of gas adsorption was followed by AES which was also used to observe relative chlorine coverage on annealing. Room temperature adsorption was random up to the saturation exposure of 1.7 L. On annealing the chlorine adlayer ordering commenced at about 800 K. One-dimensional ordering into rows along the <1, 1> directions was followed by the ordering of these into two 2D structures: an interpenetrating $\text{7}\text{1}\text{1}\text{1}$ at 830 K and an interpenetrating $\text{5}\text{1}\text{6}\text{1}$ for 860 K and above. Desorption started after 1050 K annealing and was complete by 1440 K. Saturation chlorine coverage is inferred as 5 × 10¹⁴ atoms cm^?2 and the single desorption peak coupled with the LEED analysis suggests that chlorine is bridge bonded to the W(100) surface for the ordered overlayer.     

The chemisorption of nitrogen on the (001) surface of ruthenium

High resolution electron energy loss spectroscopy (EELS), thermal desorption mass spectrometry (TDMS) and low energy electron diffraction (LEED) have been used to investigate the molecular chemisorption of N₂ on Ru(001) at 75 K and 95 K. Adsorption at 95 K produces a single chemisorbed state, and, at saturation, a (√3x√3) R30° LEED pattern is observed. Adsorption at 75 K produces an additional chemisorbed state of lower binding energy, and the probability of adsorption increases by a factor of two from its zero coverage value when the second chemisorbed state begins to populate. EEL spectra recorded for all coverages at 75 K show only two dipolar modes — ν(RuN₂) at 280–300 cm^?1 and ν(NN) at 2200–2250 cm^?1 — indicating adsorption at on-top sites with the axis of the molecular standing perpendicular to the surface. The intensities of these loss features increase and ν(NN) decreases with increasing surface coverage of both chemisorbed states.     

The adsorption of carbon monoxide on rhenium: Basal (0001) and stepped 14 (0001) × (101̄1) planes

The influence of surface defects on the adsorption of CO by rhenium is investigated using LEED, AES and linear temperature programmed desorption. On both surfaces, thermal desorption reveals two adsorption states, the lower temperature α state being resolved into two substates, and one β state, all desorbing with first order kinetics. The α state is unaffected by the surface texture, its maximum population being the same on both surfaces, around 4 × 10¹⁴ molecules cm^?2, similar to the value found for poly crystalline rhenium. On the other hand, the β state is strongly dependent on surface structure. On Re(0001) a maximum of 4 × 10¹³ molecules cm^?2 was found, and 2 × 10¹⁴ molecules cm^?2 on the stepped surface. The adsorption is activated and can be increased, by heating to 550 K, to 2 × 10¹⁴ molecules cm^?2 on the basal plane and 3.5 × 10¹⁴ molecules cm^?2 on the stepped surface. Ordered structures are now seen in LEED. Comparison of these results with previous results from polycrystalline rhenium indicate that the dissociation of β-CO on the latter surface must occur at defects other than steps.