Polyisobutylene‐based polyurethanes. V. Oxidative‐hydrolytic stability and biocompatibility

The oxidative/hydrolytic stability of polyurethanes (PUs) containing exclusively polyisobutylene (PIB), or mixed PIB/polytetramethylene oxide (PTMO), or mixed PIB/polyhexamethylene carbonate (PC) soft segments was investigated. The tensile strengths and elongations of various PUs were determined before and after agitating in 35% HNO₃ or 20% H₂O₂/0.1 M CoCl₂ solutions and retentions were quantified. The presence of PIB imparts significant oxidative/hydrolytic resistance. The tensile strength and elongation of PUs containing 70% PIB, or those of mixed PIB/PC soft segments with 50% PIB, remained essentially unchanged upon exposure to HNO₃; in contrast, PUs containing mixed PIB/PTMO soft segments with 50% PIB underwent significant degradation. The tensile strength of PUs with mixed PIB/PC (60/10%) soft segment increased after exposure to HNO₃, most likely because of oxidative crosslinking of PC segments. PIB/PTMO‐ and PIB/PC‐based PUs and commercially available PUs (Elast‐Eon® and Carbothane®) were exposed to H₂O₂/CoCl₂ solutions for up to 14 weeks. Although the experimental PIB/PC‐based PUs exhibited negligible change in mechanical properties and no surface damage, Elast‐Eon® and Carbothane® showed significant surface damage. PIB‐based polyureas and Bionate® were implanted in rats for 4 weeks in vivo, and their biocompatibility was investigated. The biocompatibility of PIB‐based materials was superior to Bionate®. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2194–2203, 2010     

Thermal stability of new zinc acetate-based complex compounds

New zinc acetate based complex compounds (of general formula Zn(CH₃COO)₂·1?2L·nH₂O) containing one or two molecules of urea, thiourea, coffeine and phenazone were prepared namely: Zn(CH₃COO)₂·2.5H₂O, Zn(CH₃COO)₂·2u·0.5H₂O, Zn(CH₃COO)₂·tu·0.5H₂O, Zn(CH₃COO)₂·2tu, Zn(CH₃COO)₂·cof·2.5H₂O, Zn(CH₃COO)₂·2cof·3.5H₂O, Zn(CH₃COO)₂·2phen·1.5H₂O. The compounds were characterized by IR spectroscopy, chemical analysis and thermal analysis. Thermal analysis showed that no changes in crystallographic modifications of the compounds take place during (heating in nitrogen before) the thermal decompositions. The temperature interval of the stability of the prepared compounds were determined. It was found that the thermal decomposition of hydrated compounds starts by the release of water molecules. During the thermal decomposition of anhydrous compounds in nitrogen the release of organic ligands take place followed by the decomposition of the acetate anion. Zinc oxide and metallic zinc were found as final products of the thermal decomposition of the zinc acetate based complex compounds studied. Carbon dioxide and acetone were detected in the gaseous products of the decomposition of the compounds if ZnO is formed. Carbon monoxide and acetaldehyde were detected in the gaseous products of the decomposition, if metallic Zn is formed. It is supposed that ZnO and Zn resulting from Zn acetate complex compounds here studied, possess different degree of structural disorder. Annealing takes place by further heating above 600°C.     

Polyisobutylene‐based polyurethanes. VI. Unprecedented combination of mechanical properties and oxidative/hydrolytic stability by H‐bond acceptor chain extenders

We describe the design, synthesis, characterization, and testing of novel polyurethanes (PUs) exhibiting unprecedented combinations of outstanding mechanical properties and oxidative/hydrolytic stabilities. This achievement is due to the use of polyisobutylene (PIB) soft segments plus flexible H‐bond acceptor chain extenders (HACEs): the PIB imparts superior oxidative/hydrolytic stability and the HACE produces reinforcing H‐bonds, which lead to outstanding mechanicals. Oxidative/hydrolytic stability was quantitated by retention of tensile strength and elongation after exposure to nitric acid. PUs containing 60–70% PIB retain their mechanical properties, whereas Carbothane®, Bionate®, and Elast‐Eon?, PUs marketed for chemical stability, degrade severely under the same conditions. Various HACEs were identified (e.g., hexaethylene glycol, tripropylene glycol, tributylene glycol, 3,3′‐diamino‐N‐methyl‐dipropylamine, etc.) and their effect on mechanical properties was investigated. A PIB‐ and HACE‐containing PU exhibited 29.2 MPa tensile strength, 620% elongation, and 80 Shore A hardness. Properties were analyzed in terms of stress–strain profiles, differential scanning calorimetry traces, dynamic mechanical thermal analysis plots, and oxidative/hydrolytic stability. The properties of various PIB‐based rubbers, that is, thermoplastic PUs, SIBSTAR®, and thermoset butyl rubber are compared. The novel PUs are promising candidates for biomaterials and industrial applications where a combination of mechanical properties and oxidative/hydrolytic stability is of the essence. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2361–2371, 2010     

A study of benzobisoxazole and benzobisthiazole compounds and polymers under hydrolytic conditions

The stability of benzobisoxazole and benzobisthiazole compounds and polymers under hydrolytic conditions was studied. 2,6-Bis(4-tert-butylphenyl)benzo[1,2-d;4,5-d′]bisoxazole (1) dissolved in acetonitrile containing sulfuric acid and water at 80°C is stable. A suspension of 2,6-bis[4-(2-benzoxazoyl)phenyl]benzo[1,2-d;5,4-d′]bisoxazole (2) in 0.2 N H₂SO₄ or 0.2 N NaOH solution at 100°C for 21 days is stable. The intrinsic viscosity of a poly(p-phenylene)benzobisoxazole (PBO) fiber sample soaked in 0.2 N H₂SO₄, water with 1 wt % polyphosphoric acid (PPA), or 0.2 N NaOH remained the same. Under very severe hydrolytic conditions such as dissolution of compound 2 or PBO in PPA or methanesulfonic acid with residual water followed by coagulation in water, benzobisoxazole underwent bond cleavage to generate carboxylic acid and o-aminophenol functional groups. This is in contrast to an earlier hypothesis that the decrease in intrinsic viscosity under these conditions was due to chain association. Poly(p-phenylene)benzobisthiazole (PBT) also underwent bond cleavage under these very severe conditions, which are unlikely to be encountered in normal applications. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2637–2643, 1999     

Microcalorimetric investigation of influence of cancerogenic and anticancerogenic compounds on nuclear chromatin of tumor cells

The influence of mitoxantron (M) and benz(a)pyrene (BP) on chromatin DNA in composition of spleen and liver tissues and cells of BALB/c mice were studied using a high-sensitive differential scanning microcalorimeter. It was established that BP can cause a) the specific breaks in inactive chromatin DNA chain and unfolding of the whole domain (a loop of chromatin) which should lead to uncontrolled genome activation; b) the breaks in the DNA double-helix creating short duplexes.M at low doses, interacting with naked linker DNA of tumor restores the chromatin structure, at high doses or at repeated injections,M causes the disturbance of chromatin structure.     

Thermal stability evaluation of doping compounds before GC-MS analysis by DSC

The Medical Commission of the International Olympic Committee forbids the use of anabolic androgenic steroids, β-agonists, stimulant and narcotic compounds to improve athletic performance. In this work, we evaluated the thermal stability of 17 compounds by the use of the DSC for their potential GC-MS analysis either under free form or under TMS derivative form. In DSC, esterified and unesterified anabolic steroids were characterized by a true melting peak, followed by a large exothermic peak at about 251–316°C due to oxidative degradation. They could be analysed by GC-MS mainly under TMS derivatives. Hydroxylated and unhydroxylated stimulant compounds (xanthines) seemed to be more stable at high temperature. As unhydroxylated xanthines were not silylated with BSTFA - TMCS, their GC analysis would be done under their free forms. TMS derivatisation of albuterol hemisulfate and codeine phosphate is preferable. In our conditions, to analyse by GC-MS all 17 doping compounds in the same GC-MS run, the optimal silylation temperature and best column initial temperature were determined at both 60°C.     

Detection of nitroaromatic and cyclic nitramine compounds by cyclodextrin assisted capillary electrophoresis quadrupole ion trap mass spectrometry

An Agilent 3DCE capillary electrophoresis system using sulfobutylether-beta-cyclodextrin (SB-beta-CD)-ammonium acetate separation buffer pH 6.9 was coupled to a Bruker Esquire 3000+ quadrupole ion trap mass detector via a commercially available electrospray ionization interface with acetonitrile sheath flow. The CE-MS system was applied in negative ionization mode for the resolution and detection of nitroaromatic and polar cyclic or caged nitramine energetic materials including TNT [2,4,6-trinitrotoluene, formula mass (FW) 227.13], TNB (1,3,5-trinitrobenzene, FW 213.12), RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine, FW 222.26) HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine, FW 296.16), and CL-20 (2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane, FW 438.19). The CE-MS system conformed to the high-performance liquid chromatography with ultraviolet absorbance detection (HPLC-UV) and HPLC-MS reference methods for the identification of energetic contaminants and their degradation products in soil and marine sediment samples.     

Thermal stability of some new complex compounds with alylacetoacetate as ligand

Summary This paper reports the investigation of the thermal stability of two new complexes with allylacetoacetate anion, Cu(C₇H₉O₃)₂ (1) and Ni(C₇H₉O₃)₂(OH₂)₂ (2), respectively. The bonding and stereochemistry of the complexes have been characterized by IR, electronic and EPR spectra. The main decomposition steps were evidenced. The two complexes exhibit a different thermal behaviour. Thus, the copper complex suffers an oxidative degradation of allylacetoacetate ligand leading to copper carbonate, which is decomposed to copper oxide. The Ni(II) complex lose the water molecules first and then the organic ligand decomposition occurs. An intermediary malonaldehyde complex seems to be obtained. Complex (1) presents in vitro antimicrobial activity.     

Stabilization of dyes against hydrolytic decomposition by the formation of inclusion compounds

The decomposition reactions of the dyes phenol blue and murexide were measured spectroscopically in acidic solution at different temperatures. From these reaction rates and their temperature dependence in the absence and presence of various hosts, the stability constants and the reaction enthalpies of the dye complexes with noncyclic dextrins, cyclodextrins and cucurbituril were calculated.-Cyclodextrin enhances the stability of phenol blue in acidic solution. This effect is even more pronounced with cucurbituril. Due to the molecular structure of murexide this dye cannot form inclusion complexes with hosts containing hydrophobic cavities.     

Chemoselective acylation of some oxidofunctionalised organolithium compounds

Once oxidofunctionalised organolithium compounds 1 (easily prepared by reductive ring opening of isochroman and phthalan by DTBB-catalysed lithiation) were transmetallated with ZnBr₂/CuCN·2LiCl and reacted successively with a carboxylic acid anhydride and an acyl chloride in THF at 0°C, the corresponding differently acylated compounds 4 were obtained after hydrolysis with water. The anhydride performed the O-acylation exclusively and the acyl chloride carried out the C-acylation.     

Thermal stability of high-energy compounds

The influence of molecular structure on the stability of high-energy compounds is considered. The kinetic parameters of the decomposition of various energy-rich groups in monofunctional compounds are established. Data on decomposition of compounds with mixed functional groups are described. The sites of primary breakdown are determined and the mutual influence of functional groups on the stability is considered. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 231–234, February, 2000.     

Effect of the structural disorder of T-shaped triazolyl-based coordination network compounds on the pore size and stability

1. Download : Download high-res image (201KB)
2. Download : Download full-size image

     

Conjugates of polyhedral boron compounds with carbohydrates. 4. hydrolytic stability of carborane–lactose conjugates depends on the structure of a spacer between the carborane cage and sugar moiety

A novel 1,2‐dicarba‐closo‐dodecaborane–lactose conjugate ( 4a ) with an N‐glycosidic linkage was synthesized. This conjugate was found to be much more stable against hydrolytic deboronation (closo to nido tranformation of the carborane cage) under neutral conditions than a related carborane–lactose conjugate ( 1a ) with an O‐glycosidic linkage. This result demonstrates that the hydrolytic stability of carborane–carbohydrate conjugates in neutral aqueous solutions may depend dramatically on the chemical nature of the spacer that links the carbohydrate moiety with the boron cage, the rate of hydrolysis varying by orders of magnitude. We relate a significant decrease in the deboronation rate to the formation of more strongly bound supramolecular aggregates, in which the boron cage is less accessible to nucleophilic attack by solvent molecules, in the solution of the carborane–N‐lactoside conjugate 4a . Copyright © 2006 John Wiley & Sons, Ltd.     

The comparison of thermal stability of some hydrofluoroethers and hydrofluoropolyethers

The thermal stability of representative hydrofluoropolyether (HFPE) and hydrofluoroether (HFE) compounds has been evaluated. The observed stability order appears to be correlated with the nature of the hydrogenated chain ends; in particular, molecules having fully hydrogenated chain ends (OCH₃ and OC₂H₅) show a significantly lower stability compared with the OCF₂H terminated compounds. The main degradation products suggest, however, that the same primary reaction is responsible for the decomposition of all the compounds examined; this reaction involves the fragmentation of the R_fOC_xH_yF_z bond with fluorine transfer between the two carbon atoms close to the oxygen, leading to the formation of a hydrofluorocarbon C_xH_yF_(z+1) and an acyl fluoride or a ketone.     

Microcalorimetric studies of some cementitious materials

The Al doped tricalcium silicate hydration in the presence of active silica was studied by means of calorimetry, DTA, TG, XRD and conductometry of the hydrating suspension.

---

Zusammenfassung Mittels Kalorimetrie, DTA, TG, Röntgendiffraktion und Konduktometrie der Hydratierungssuspension wurde in Gegenwart von aktivem Silizium-dioxid die Hydratation von mit Al versetztem Tricalciumsilikat untersucht.

     

Thermodynamic and kinetic stability of inclusion compounds under heating

Thermodynamic and kinetic stability of inclusion compounds (so called supermolecular compounds) is discussed. Compounds under study and discussion are clathrates (with coordination compounds matrices) and intercalates (with fluorinated graphite matrices).     

Enhanced stability of ZnTPPS by polymeric gold nanoparticles in acidic aqueous solutions

Novel kind of core-shell corona complex micelles were prepared, which enhanced both the hydrolytic stability and the photostability of water-soluble zinc tetrakis(4-sulfonatophenyl) porphyrin (ZnTPPS) in acidic aqueous solutions. The core-shell gold nanoparticles (AuNPS) were synthesized by reducing HAuCl₄ and di-thioester terminated block copolymer, poly(Nisopropylacrylamide)-block-poly(4-vinylpyridine) (PNIPAM-b-P4VP). The complex micelles with gold core, P4VP/ZnTPPS shell and PNIPAM corona were formed by simple mixing of gold nanoparticles and ZnTPPS. The photochemical properties of the complex micelles were studied by UV–Visiblespectroscopy and fluorescence spectroscopy. The results showed trapping of ZnTPPS in the positively charged micellar shell that effectively prevented demetallation of the ZnTPPS that would occur in acidic aqueous solutions. Furthermore, with appropriate concentration of gold nanoparticles, ZnTPPS in the complex micelle had excellent photostability by suppression of generation of reactive oxygen species (ROS). The enhanced stability of ZnTPPS in acidic aqueous media could be extensively used for photocatalysis and in solar cells.     

X-ray crystallographic study of some pentacoordinated organogermanium compounds

The X-ray crystallographic structures of 2-(2-phenyl-5-oxo-1,3,2-oxathiagermolan-2-ylthio)acetic acid (2), its pyridinium salt (3), and the pyridinium salt of 2-(2-t-butyl-5-oxo-1,3,2-oxathiagermolan-2-ylthio)acetic acid (1), (4), together with 2-(2-phenyl-1,3,2-oxathiagermolan-2-ylthio)ethanol (5) were determined and compared with that of 1. All of compounds investigated, 2-5, have the TBP-like, pentacoordinated structure. This fact seems to indicate that the driving force of pentacoordination of this type of compounds is the existence of an oxygen atom δ to the germanium atom that readily forms a five membered ring by hypercoordination.     

Theoretical investigation on the structure and stability of some neutral noble gas compounds containing Xe-Xe bond

DFT calculations are performed to investigate the structure, stability, and nature of chemical bonding of some neutral noble gas insertion compounds containing a Xe-Xe bond; including HXeXeR, FXeXeR as well as RXeXeR (R = CN, NC, CCH, and BS). Geometry optimization of the considered molecules anticipate the existence of just four stable compounds (HXeXeCN, HXeXeNC, FXeXeCN, and FXeXeCCH); and rest of the molecules dissociate during the structural optimization. The results of NBO and AIM calculations show that a H(F)XeXeR molecule has a covalent H(F)-Xe bond in the H(F)XeXe⁺ fragment, which is bonded to R⁻ mainly through columbic interaction. Thermodynamic study indicates that all of the considered unimolecular dissociation channels for decomposition of H(F)XeXeR molecules to neutral fragments are both exothermic and exorergic; but dissociation to ionic species (H(F)XeXe⁺ and R⁻) is endothermic. Also kinetic study of the most probable dissociation reaction shows that FXeXeR molecules are metastable with respect to the global minimum F-R + 2Xe. Therefore, FXeXeCN molecule is more kinetically protected against the decomposition reaction than the other molecules and its experimental detection is more likely.     

Solubility and thermal stability of some amino-mellitate compounds

By reaction between the anion of mellitic acid (benzenehexacarboxylic acid) and some protonated linear polyamines (diethylenetriamine, triethylenetetramine, tetraethylene-pentamine, pentaethylenehexamine, spermidine, and spermine), fairly insoluble complexes have been obtained, with the general formula (amine)(x)(mellitate)H(6) (diethylenetriamine and spermidine, x=1; triethylenetetramine and spermine, x=0.75; tetraethylenepentamine, x=0.6 and 0.8; pentaethylenehexamine, x=0.5). K(s0) values for these complexes have been determined at I=0 mol dm(-3) and T=25 degrees C (logK(s0) ranges between -48.2 and -56.6). The solubility has been studied as a function of pH and of ionic strength. The thermal analysis, performed using air or argon flow, showed that all the solids behave in a similar way. In the range 20-120 degrees C the loss of hydration water occurs, and in the range 150-350 degrees C the first step of non oxidative decomposition takes place, with complete decomposition at 650 degrees C in air flow, whilst in argon flow the decomposition is still incomplete at 900 degrees C. Preliminary results of a parallel diffractometric study are also reported.