胶原纤维接枝多酚负载纳米钯的制备及其对硝基苯加氢的催化特性

以胶原纤维(CF)接枝表棓儿茶素棓酸脂(EGCG)为载体,制备了新型非均相钯(Pd)纳米催化剂(CF-EGCG-Pd).EGCG作为"桥分子"不仅对Pd纳米颗粒具有锚定作用,而且能控制Pd纳米颗粒的大小及分布.通过SEM、TEM、XRD、XPS对该催化剂的形貌和物理特性能进行了表征,发现该催化剂具有规整的纤维结构,在胶原纤维的外表面形成了高分散的平均粒径在3.8 nm的Pd纳米颗粒.将该催化剂用于硝基苯液相催化加氢反应,结果表明在308 K和1.0 MPa氢压下,硝基苯转化速率(TOF)达到34.13 mol·mol-1·min-1,苯胺选择性为100%,催化剂重复使用3次其催化活性基本不变.     

电化学去合金化Pt(Pd)-Cu对氧的电催化还原活性的研究

应用电化学去合金法制备了表面覆盖有Pt(Pd)原子层的Pt(Pd)-Cu合金催化剂.研究该催化剂在0.1mol.L-1HClO4酸性溶液中对氧气电化学还原的催化活性,并采用同步辐射反常X-射线衍射法(Anomalous X-ray Diffraction,AXRD)和表面X-射线散射法(Surface X-ray Scattering,SXS)从原子尺度研究了去合金化后催化剂的结构.分析对比纳米颗粒、薄膜和单晶3种不同形式的去合金化Pt-Cu的结构和催化活性以及Pt-Cu和Pd-Cu两种不同合金薄膜的结构和催化活性.结果表明,表面应力是影响催化剂催化活性的关键因素,而应力大小则与去合金化后所形成的表面Pt(Pd)层的厚度相关,材料尺寸和组成元素等都影响表面Pt(Pd)层的厚度.提出可利用调控材料表面的应力来设计高催化活性的催化剂.     

胶原纤维接枝多酚负载钯-镍双金属催化剂的制备及其催化硝基苯的加氢性能

 以胶原纤维 (CF) 接枝表棓儿茶素棓酸酯 (EGCG) 为载体, 制备了新型 Pd-Ni/CF-EGCG 催化剂. EGCG 作为“桥分子”对 Pd-Ni 纳米粒子起着分散和锚定作用. 通过热重分析、扫描电镜、透射电镜、X 射线光电子能谱和 X 射线衍射对该催化剂进行了表征. 结果表明, 该催化剂具有规整的纤维结构, 在纤维表面形成了高分散的平均粒径为 2.2 nm 的 Pd-Ni 合金颗粒. 液相硝基苯催化加氢反应结果表明, 当 Ni 和 Pd 摩尔比为 0.8 时, Pd-Ni/CF-EGCG 催化剂具有最佳的双金属协同作用, 在 308 K 和 1.0 MPa 氢压下, 加氢速率达 237 min?1, 比单金属的 Pd/CF-EGCG 快 1 倍, 重复使用 5 次后仍具有较高的催化活性.     

基于杨梅单宁制备Pt/SiO_2-C催化剂及其对肉桂醛选择性催化加氢性能

以天然植物多酚杨梅单宁(BT)改性的SiO2为载体,经吸附Pt4+、Na BH4还原和碳化处理制得Pt/SiO2-C催化剂.对所制备的催化剂进行了表征,并考察了催化剂对肉桂醛液相选择性催化加氢的性能.结果表明,由于杨梅单宁分子的分散稳定作用,使碳化过程中纳米Pt粒子粒径适度增长且保持高度分散.碳化温度影响杨梅单宁的脱除效果、纳米Pt粒子晶型与粒径,以及载体的比表面积与孔径,最终影响肉桂醛催化加氢性能.500℃碳化处理得到的Pt/SiO2-C-500催化剂的催化性能最佳,在乙醇为溶剂,323.25 K和2MPa氢压条件下,肉桂醛6 h转化率为82.98%,生成肉桂醇的选择性达到91.33%,表现出较高的催化活性和选择性.同时,该催化剂重复使用5次后其催化活性仍为第一次反应活性的81.18%,体现出优良的重复使用性.     

氨功能化陶瓷膜支撑体担载钯纳米颗粒及其增强的催化性能(英文)

采用双氨基硅烷偶联剂N-β-(氨乙基)-γ-氨丙基三甲氧基硅烷(AAPTS)对陶瓷膜表面接枝功能化并负载钯纳米颗粒,制得一种有效的可重复使用的催化剂.利用X射线衍射、扫描电镜、电子能谱、感应耦合等离子体、X射线光电子能谱和高分辨透射电镜对催化剂进行了物性表征,并将其用于催化对硝基苯酚加氢制对氨基苯酚反应.和单氨基硅烷γ-氨丙基三乙氧基硅烷(3-APTS)功能化改性相比,担载在AAPTS功能化陶瓷膜上的钯纳米颗粒具有更高的催化活性和稳定性.相比于3-APTS,AAPTS分子中含有两个氨基,具有更强的供电子效应,因此钯纳米颗粒可更多更稳定地负载在AAPTS功能化陶瓷膜上,从而具有更高的催化活性和稳定性.     

Pt/Ni/Fe三金属纳米颗粒的制备及催化制氢活性

采用化学共还原方法制备了聚乙烯吡咯烷酮(PVP)保护的Pt/Ni/Fe三金属纳米颗粒,对所合成的纳米颗粒进行了表征,研究了三金属纳米颗粒的化学组成对其催化NaBH4制氢的影响.研究结果表明,Pt/Ni/Fe三金属纳米颗粒的平均粒径在2 nm左右,Pt/Ni/Fe三金属纳米颗粒催化活性高于Pt,Ni或Fe单金属纳米颗粒和Pt/Ni,Pt/Fe或Ni/Fe双金属纳米颗粒的催化活性,其中Pt10Ni78.75Fe11.25三金属纳米颗粒的催化活性最高,30℃时,其催化活性可达63.920×103molH2/(molPt·h).Pt/Ni/Fe三金属纳米溶胶催化剂具有很好的催化稳定性,10次重复催化实验后,该催化剂依然可以保持较高的催化活性.该三金属纳米溶胶催化NaBH4水解反应的活化能为52 kJ/mol.     

聚苯胺共价接枝碳纳米管负载Pt催化剂的制备及对甲醇电催化性能的研究

以氨基化的碳纳米管为基体,通过界面聚合方法将聚苯胺共价接枝于碳纳米管表面,负载催化剂颗粒Pt. 通过透射电镜(TEM)、X射线衍射(XRD)及电化学方法对催化剂进行了表征. TEM结果表明通过界面聚合的方法可以使聚苯胺均匀地接枝于碳纳米管表面. 电化学测试结果表明,碳纳米管共价接枝聚苯胺作为载体可以提高催化剂的抗CO中毒性能,有利于对甲醇的催化氧化. 研究其对甲醇的催化活性,并与商业的JM(Pt/C)催化剂进行了对比. 结果表明,碳纳米管共价接枝聚苯胺,有效提高了催化剂的稳定性,延长催化剂的寿命.     

金属有机骨架材料MIL-53(Al)负载纳米Pd颗粒:一种CO氧化的活性催化剂(英文)

通过等体积浸渍法制备了金属有机骨架材料MIL-53(Al)(MIL:Materials of Institut Lavoisier)负载纳米Pd催化剂.采用X射线衍射(XRD)、透射电子显微镜(TEM)和X射线光电子能谱(XPS)等手段对催化剂的结构进行了表征.催化剂在反应前后XRD衍射峰保持不变,说明载体MIL-53(Al)具有良好的稳定性.采用TEM对催化剂进行表征,结果表明,MIL-53(Al)的多孔晶体结构有助于形成高度分散的纳米Pd颗粒,样品2.7%(w)Pd/MIL-53中Pd颗粒的平均粒径为2.21 nm.该催化剂在CO氧化反应中表现出较高的催化活性,115°C达到完全转化.同时催化剂可循环使用,多次反应后催化活性和催化剂结构都保持稳定.     

碗状双亲型ZSM-5分子筛负载金纳米粒子的制备及催化性能

通过不对称修饰法制备了一种碗状双亲型的ZSM-5分子筛, 其拥有一个非极性的外表面和一个可修饰的极性内表面; 进一步利用经典的氨基接枝-原位还原过程, 选择性地在其内表面生长金纳米粒子. 通过X射线粉末衍射、 扫描电子显微镜、 透射电子显微镜、 红外光谱和X射线光电子能谱对材料进行了表征, 并考察了其催化硝基苯加氢制苯胺反应的性能. 在非常温和(室温、 水作溶剂及无需氮气保护)以及更低反应物浓度(0.03 mol/L, 低于室温下硝基苯在水中的溶解度)条件下, 该催化剂展现出与其它使用有机溶剂的催化剂相当的催化活性和选择性, 而且其催化性能明显高于其它以水为溶剂的催化剂, 这表明载体的双亲型结构是提升催化性能的主要原因. 该催化剂循环使用6次后, 其催化活性和选择性仍保持在相同等级.     

金属有机骨架材料MIL-53(Al)负载纳米Pd颗粒：一种CO氧化的活性催化剂

通过等体积浸渍法制备了金属有机骨架材料MIL-53(Al) (MIL：Materials of Institut Lavoisier)负载纳米Pd催化剂. 采用X射线衍射(XRD)、透射电子显微镜(TEM)和X射线光电子能谱(XPS)等手段对催化剂的结构进行了表征. 催化剂在反应前后XRD衍射峰保持不变,说明载体MIL-53(Al)具有良好的稳定性. 采用TEM对催化剂进行表征,结果表明,MIL-53(Al)的多孔晶体结构有助于形成高度分散的纳米Pd颗粒,样品2.7% (w) Pd/MIL-53 中Pd颗粒的平均粒径为2.21 nm. 该催化剂在CO氧化反应中表现出较高的催化活性,115 ℃达到完全转化. 同时催化剂可循环使用,多次反应后催化活性和催化剂结构都保持稳定.     

利用手持技术改进测定乙醇分子结构实验

利用压强传感器代替排水集气法,改进测定乙醇分子结构实验的仪器装置,并探索最佳反应条件。另外,设计两个空白实验,结合压强变化曲线对实验误差进行相关讨论。     

光谱仪测试范围的扩展

由于石化行业的生产需要，其材质的使用具有多样性和广泛性，经常会出现顾客委托的测试样品的一个或几个元素跨越光谱仪现有测试程序测量范围的情况。本法通过对光谱仪测试原理的认识，根据光谱仪的测试能力及标样的采集，实现了一个或几个元素测量范围的扩展，并对其测量的影响因素进行了研究。     

Neutral diterpenoids of oleoresins of five species of conifers of Transcarpathia

The compositions of the neutral diterpenoids of the oleoresins of five species of conifers growing in the Transcarpathia have been studied. It has been found that the oleoresins ofAbies alba M.,Larix decidua M., andPicea excelsa L. contain more than 50% of neutral diterpenoids. The group and qualitative compositions of the oxygen-containing diterpenoids have been determined. In the oleoresins ofAbies alba,Picea excelsa, andPicea abies tertiary alcohols — cis-abienol and isocembrol — predominate, while inLarix decidua the main component is the hydroxy ester larixyl acetate. Primary alcohols related to the resin acids have been found in all the oleoresins investigated. Features of the distribution of diterpenoids according to the species of conifers have been revealed. The results obtained are necessary for the chemotaxonomy of conifers of the family Pinceae.Novosibirsk Institute of Organic Chemistry, Siberian Branch, Academy of Sciences of the USSR. Translated from Khimiya Prirodynkh Soedinenii, No. 6, pp. 812–816, November–December, 1988.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Influence of viscosity of medium on processes of oxygen quenching of excited states of mesoporphyrin

The oxygen quenching rate constants for singlet and triplet excited states of the dimethyl ester of mesoporphyrin IX increase with decreasing viscosity of the medium and reach a maximum at a viscosity of approximately 0.4 mPa·sec, after which the rate constants begin to decrease. The drop in rate constant with increasing fluidity of the medium may be related to a nonequilibrium character of the elementary act in the interaction of the reactants in the solvent cage. In viscous media such as isopropyl alcohol, isobutyl alcohol, and isoamyl alcohol, the reaction radius is greater than the sum of the radii of the reacting particles. The long-range character of these processes is due to the relatively weak dependence of the quenching probability on distance.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 25, No. 2, pp. 161–167, March–April, 1989.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

物质分配系数的测定实验改进

实验教学目的是从解决实际问题出发,以实验技术训练和实验设计思想培养为目标。介绍了将单一的物质分配系数测定实验改进为综合实验,提高了实验效果及实验资源利用率。     

Calculation of enthalpies of hydrogenation of hydrocarbons

Sets of hydrogen molecule equivalents have been developed which permit the calculation of hydrogenation of different types of carbon-carbon bonds from ab initio total energies (3-21G and 6-31G* basis sets, and, to a more limited extent, for MP2/6-31G* data) of reactants and products. The calculated enthalpies of hydrogenation are in good agreement with experiment for unstrained molecules, with average errors on the order of 2 kcal/mol. The 6-31G* equivalents allow the enthalpies for strained molecules to be calculated accurately, but the 3-21G equivalents do not. The equivalents for both basis sets have been tested by calculating the enthalpies of hydrogenation of carbon-carbon bonds in nitrogen- and oxygen-containing organic molecules, free radicals, and classical carbocations. The results are in good agreement with experiment in most cases.