Dimeric ruthenium complexes of dicyanopyrazines: complexes with an unstable mixed-valence state

Pentaammineruthenium complexes bridged by 2,3-dicyanopyrazine and 2,3-dicyano-5, 6-dimethylpyrazine have been prepared and characterized. The bridging ligand binds to the metal atoms through the cyano nitrogen. Complexes can be prepared in the +4 and +6 oxidation states but the mixed-valence, +5, state is not observed experimentally, unlike the previously prepared 1,2-dicyanobenzene dimer which does have a stable +5 state. A simple electronic model is constructed from the spectroscopic data and is used to show that the electronic perturbations caused by the uncomplexed nitrogen atoms in the pyrazine ring are sufficient to drive the disproportionation reaction of the +5 state.     

Lithium intercalation of phenyl-capped aniline dimers: a study by photoelectron spectroscopy and quantum chemical calculations

Structural and electronic properties of pristine and lithium-intercalated, phenyl-capped aniline dimers as a model for the lithium-polyaniline system have been studied by photoelectron spectroscopy and quantum chemical calculations. It was found that the electronic structure of reduced and oxidized forms of oligoanilines is only weakly affected by isomerism. Upon intercalation, charge transfer from the Li-atoms is remarkable and highly localized at N-atomic sites, where configurations are energetically favored in which both N atoms of the dimers are bound to Li atoms. Conversion of nitrogen sites is different for the two forms of aniline dimers and incomplete up to high intercalation levels, indicating a pronounced role of solid-state effects in the formation of such compounds.     

A computational study of oxygen-termination of a (6,0) boron nitride nanotube

Abstract  

We performed density functional theory (DFT) calculations to investigate the properties of electronic structures of representative armchair and zigzag silicon carbide nanotubes (SiCNTs). The model structures were optimized and the NMR parameters were calculated at the sites of silicon-29 and carbon-13 atoms in these structures. Our results indicated that different electronic environments could be detected by using the atoms of nanotubes in which the atoms of tips, especially for zigzag SiCNT, exhibit distinctive properties among other atoms.     

QTAIM charge-charge flux-dipole flux interpretation of electronegativity and potential models of the fluorochloromethane mean dipole moment derivatives

Infrared fundamental vibrational intensities and quantum theory atoms in molecules (QTAIM) charge-charge flux-dipole flux (CCFDF) contributions to the polar tensors of the fluorochloromethanes have been calculated at the QCISD/cc-pVTZ level. A root-mean-square error of 20.0 km mol(-1) has been found compared to an experimental error estimate of 14.4 and 21.1 km mol(-1) for MP2/6-311++G(3d,3p) results. The errors in the QCISD polar tensor elements and mean dipole moment derivatives are 0.059 e when compared with the experimental values. Both theoretical levels provide results showing that the dynamical charge and dipole fluxes provide significant contributions to the mean dipole moment derivatives and tend to be of opposite signs canceling one another. Although the experimental mean dipole moment derivative values suggest that all the fluorochloromethane molecules have electronic structures consistent with a simple electronegativity model with transferable atomic charges for their terminal atoms, the QTAIM/CCFDF models confirm this only for the fluoromethanes. Whereas the fluorine atom does not suffer a saturation effect in its capacity to drain electronic charge from carbon atoms that are attached to other fluorine and chlorine atoms, the zero flux electronic charge of the chlorine atom depends on the number and kind of the other substituent atoms. Both the QTAIM carbon charges (r = 0.990) and mean dipole moment derivatives (r = 0.996) are found to obey Siegbahn's potential model for carbon 1s electron ionization energies at the QCISD/cc-pVTZ level. The latter is a consequence of the carbon mean derivatives obeying the electronegativity model and not necessarily to their similarities with atomic charges. Atomic dipole contributions to the neighboring atom electrostatic potentials of the fluorochloromethanes are found to be of comparable size to the atomic charge contributions and increase the accuracy of Siegbahn's model for the QTAIM charge model results. Substitution effects of the hydrogen, fluorine, and chlorine atoms on the charge and dipole flux QTAIM contributions are found to be additive for the mean dipole derivatives of the fluorochloromethanes.     

Calculation of the electronic and optical properties of indium tin oxide by density functional theory

Density functional theory (DFT) was used to calculate the bulk electronic and optical properties of indium tin oxide (ITO). The ITO model was constructed replacing indium atoms with tin atoms in the cubic unit cell of indium oxide. To allow more possibilities for tin atom substitution than afforded by the forty-atom primitive cell of indium oxide all eighty atoms of the unit cell were included in the stoichiometry (In_32−xSn_xO₄₈) using periodic boundary conditions. A number of properties of ITO were calculated including the optical band gap, charge carrier density and plasma frequency. The dependence of the electronic and optical properties of ITO on a variety of parameters such as the tin content, cubic lattice parameter and the distance between adjacent tin atoms was investigated. The electronic and optical properties agreed well with experimental data and allowed insight into the origin of the electronic and optical properties of ITO.     

Theoretical study of atoms by the electronic kinetic energy density and stress tensor density

The electronic structure of atoms in the first, second, and third periods were analyzed using the electronic kinetic energy density and stress tensor density, which are local quantities motivated by quantum field theoretic consideration, specifically the rigged quantum electrodynamics. The zero surfaces of the electronic kinetic energy density, which are called as the electronic interfaces, of the atoms were computed. It was found that their sizes exhibited clear periodicity and were comparable to the conventional atomic and ionic radii. The electronic stress tensor density and its divergence, tension density, of the atoms, were also computed and how their electronic structures were characterized by them was discussed. © 2016 Wiley Periodicals, Inc.     

生长中纳米碳管的电子结构

利用第一原理的离散变分方法计算了生长中纳米碳管团簇的电子结构,发现悬挂键的存在导致管口处的电子结构明显地不同于管体,对应的非键合价电子不仅直接改变管口处碳原子之间的键合模式,而且进一步增强管口处碳原子之间的结合,促使碳原子只向管芯移动,这与实验中观察到的封闭顶端的几何形态相一致;而且降低碳管的化学稳定性.与完整型纳米碳管截然不同的电子结构决定了生长中纳米碳管在合成纳米材料过程中具有不同的作用行为.     

SiC-doped boron nitride nanotubes: computations of 11B and 14N quadrupole coupling constants

Abstract  

Density-functional theory calculations have been performed to investigate the properties of the electronic structures of silicon–carbon-doped boron nitride nanotubes (BNNTs). The geometries of zigzag and armchair BNNTs were initially optimized and the quadrupole coupling constants subsequently calculated. The results indicate that doping of B and N atoms by C and Si atoms has more influence on the electronic structure of the BNNTs than does doping of B and N atoms by Si and C atoms. The changes of the electronic sites of the N atoms are also more significant than those of the B atoms.     

Interplay between charge and vibrational delocalization in cationic helium clusters

The stable structures and low temperature thermodynamics of cationic helium clusters are investigated theoretically using a diatomics-in-molecules model for the potential energy surfaces and a computational framework in which both electronic and nuclear degrees of freedom are treated on a quantum mechanical footing. While the charge is generally carried by two atoms, vibrational delocalization significantly spreads out the charge over multiple isomers for clusters containing five or more helium atoms. Our calculations indicate that large clusters are essentially fluid with a well-defined solvation shell around the charged core.     

FMBen(FM=Fe,Co, Ni; n=1-12)团簇结构和电子性质

采用密度泛函理论中的广义梯度近似对FMBen(FM=Fe, Co, Ni; n=1-12)团簇的几何构型进行优化, 并对能量、频率和磁性进行了计算, 同时考虑了电子的自旋多重度. 结果表明, 纯铍团簇的幻数是由电子的壳层模型确定, 而FMBen团簇的幻数主要由几何效应来解释; 掺杂铁磁性的过渡金属(Fe, Co, Ni)提高了纯团簇的稳定性. 二阶能量差分表明FMBen(FM=Fe, Co, Ni)的幻数分别为5, 10; 5, 10; 4, 10. 通过对磁性质的研究发现掺杂不同的过渡金属时, 磁矩出现了不同的变化规律.     

Electronic structure of sulfur terminated zigzag boron nitride nanotube: A computational study

Density functional theory (DFT) calculations have been performed to investigate the electronic and structural properties of sulfur (S) terminated models of zigzag boron nitride (BN) nanotube. Four models including pristine, boron (B) tip terminated by S, nitrogen (N) tip terminated by S, and both of B and N tips terminated by S have been considered for optimizations and chemical shielding (CS) parameters calculations. The results indicate that the B–N bond lengths do not detect any changes due to the S-termination but the band gaps and dipole moments detect notable changes especially for the model of the N-tip terminated by the S atoms. The CS parameters also indicate that the atoms of the models are divided into layers with similar parameters in each layer. In the model of the B-tip terminated by the S atoms, the CS parameters indicate strong chemical bonding of N- and S-layers; however, only some attractions between the B- and S-layers of the model of the N-tip terminated by the S atoms have been detected. In the model of B and N tips terminated by the S atoms, the most significant changes among the models are detected.     

FMBen（FM=Fe,Co,Ni;n=1-12）团簇结构和电子性质

采用密度泛函理论中的广义梯度近似对FMBen(FM=Fe,Co,Ni;n=1-12)团簇的几何构型进行优化,并对能量、频率和磁性进行了计算,同时考虑了电子的自旋多重度.结果表明,纯铍团簇的幻数是由电子的壳层模型确定,而FMBen团簇的幻数主要由几何效应来解释;掺杂铁磁性的过渡金属(Fe,Co,Ni)提高了纯团簇的稳定性.二阶能量差分表明FMBen(FM=Fe,Co,Ni)的幻数分别为5,10;5,10;4,10.通过对磁性质的研究发现掺杂不同的过渡金属时,磁矩出现了不同的变化规律.     

Finite size scaling for the atomic Shannon-information entropy

We have developed the finite size scaling method to treat the criticality of Shannon-information entropy for any given quantum Hamiltonian. This approach gives very accurate results for the critical parameters by using a systematic expansion in a finite basis set. To illustrate this approach we present a study to estimate the critical exponents of the Shannon-information entropy S approximately (lambda-lambda(c))(alpha(S) ), the electronic energy E approximately (lambda-lambda(c))(alpha(E) ), and the correlation length xi approximately mid R:lambda-lambda(c)mid R:(-nu) for atoms with the variable lambda=1/Z, which is the inverse of the nuclear charge Z. This was realized by approximating the multielectron atomic Hamiltonian with a one-electron model Hamiltonian. This model is very accurate for describing the electronic structure of the atoms near their critical points. For several atoms in their ground electronic states, we have found that the critical exponents (alpha(E),nu,alpha(S)) for He (Z=2), C (Z=6), N (Z=7), F (Z=9), and Ne (Z=10), respectively, are (1, 0, 0). At the critical points lambda(c)=1/Z(c), the bound state energies become absorbed or degenerate with continuum states and the entropies reach their maximum values, indicating a maximal delocalization of the electronic wave function.     

On the shell structure and geometry of monovalent metal clusters

The Hückel model is used to study the electronic structure of monovalent metal clusters. In an fcc cluster the Hückel model gives an estimate to the electronic structure of a free electron cluster. It is shown that the surface faceting of the fcc cluster can destroy the electronic shell structure already when the cluster has about 100 electrons. In the Hückel model the icosahedral structure has smaller total energy than the fcc structures, from which the Wulff construction has the smallest energy already when the cluster has 600 atoms.     

Path-integral Monte Carlo simulation of the recombination of two Al atoms embedded in parahydrogen

We report the use of path-integral Monte Carlo (PIMC) simulations in the study of the stability against recombination of two Al atoms trapped in solid parahydrogen (pH2) at 4 K. The many-body interactions involving open-shell Al atoms are described with a pairwise additive Hamiltonian model. To estimate the lifetime against recombination, we use PIMC simulations to define an effective potential averaged over the position of the pH2 molecules, followed by a transition-state treatment. Different initial embedding sites are explored. If the initial substitution sites are within a distance of approximately 13 bohrs, the Al atoms will significantly distort the lattice structure to allow recombination, with an accompanying release of energy during the process. For substitution distances longer than approximately 14 bohrs, the dispersion of Al atoms is shown to be metastable, with lifetimes varying from approximately 30 min to several days. The electronic anisotropy is a factor that helps to stabilize the dispersion.     

Half metallicity and electronic structures in armchair BCN-hybrid nanoribbons

We study magnetism and electronic structures of armchair BCN-hybrid nanoribbons from density functional theory. Different from armchair graphene nanoribbons, armchair BCN-hybrid nanoribbons are found to present magnetism along the edges of the nanoribbons if B and N atoms are unpaired in the nanoribbons. Intriguing spin-polarized bands, including magnetic semiconductors, half metals, and magnetic metals, are obtained in the armchair nanoribbons with both the edges composed of C and N atoms. The spin polarization in these armchair nanoribbons is ascribed to the appearance of the unsaturated electronic states in the systems. The magnetic metallicity can be tuned further to half metallicity by adsorbing O atoms at appropriate positions in the ribbons. The electronic structures of the nanoribbons without spin polarization are also analyzed. Our studies provide understanding of the magnetism mechanisms and the electronic properties and most importantly, how to achieve half metallicity in low-dimensional BCN-hybrid systems.