Assessment of heavy metal background values in the soils of inland coastal areas of Venice,Italy

The main aim of this project was to assess background levels of heavy metals in soil in the inland coastal area of Venice, Italy. The pilot study area is located near the industrial area of Porto Marghera, considered of national interest in terms of contaminated soil remediation (Environmental Ministerial Decree n. 471/1999). The Decree under consideration emphasises the importance of the assessment of background values in soil remediation. Results will show cases (As and Sn) in which background values are greater than concentration limit standards given by legislation.     

Optimization of environmental friendly process for removal of cadmium from wastewater

Simple, efficient and eco-friendly electrochemical method for removal and recovery of Cd(II) from wastewater has been studied. Experiments were carried out in a batch electrochemical reactor with iron electrodes. The removal was examined at different pH values and electrical potentials. It was observed that the experiments carried out at 20 V and at pH 9 were sufficient for the maximum removal of Cd(II). This method is highly efficient in removal of Cd(II) from wastewater containing up to 1000 mg L^?1. The removal is faster in comparison with the adsorption on activated carbon, which is one of the most important requirements for practical application of this treatment method. In this process, the use of different electrical potentials can provide a wide range of pH values for performing this process. The removal data were used to determine the adsorption kinetics by using the first-order adsorption kinetics model. The data can be analyzed in terms of various adsorption models. The results of Cd(II) removal from real samples indicate that the method used in this study can provide an efficient and cost-effective technology for the treatment of Cd(II)-containing wastewater. The parameters can be used for designing a plant for an economical treatment of Cd(II)-rich water and wastewater.     

Determination of sixteen polycyclic aromatic hydrocarbons in aqueous and solid samples from an Italian wastewater treatment plant

A robust procedure for the determination of 16 US EPA PAHs in both aqueous (e.g. wastewaters, industrial discharges, treated effluents) and solid samples (e.g. suspended solids and sludge) from a wastewater treatment plant (WWTP) is presented. Recovery experiments using different percentages of organic modifier, sorbents and eluting solvent mixtures were carried out in Milli-Q water (1000 mL) spiked with a mixture of the PAH analytes (100 ng/L of each analyte). The solid phase extraction (SPE) procedures applied to spiked waste water samples (1000 mL; 100 ng/L spiking level) permitted simultaneous recovery of all the 16PAHs with yields >70% (6-13% RSD). SPE clean up procedures applied to sewage and stabilized sludge extracts, showed percent recoveries in the range 73-92% (7-13% RSD) and 71-89% (7-12% RSD), respectively. The methods were used for the determination of PAHs in aqueous and solid samples from the WWTP of Fusina (Venice, Italy). Mean concentrations, as the sum of the 16PAHs in aqueous and suspended solid samples, were found to be approx. in the 1.12-4.62 microg/L range. Sewage and stabilized sludge samples contained mean PAH concentrations, as sum of 16 compounds, in the concentration range of 1.44-1.26 mg/kg, respectively. Extraction and clean up procedures for sludge samples were validated using EPA certified reference material IRM-104 (CRM No. 912). Instrumental analyses were performed by coupling HPLC with UV-diode array detection (UV-DAD) and fluorescence detection (FLD).     

Identification and removal of sulfhydryl groups from wastewaters

Thiols represent a source of environmental pollution especially wastewater. This work proposed to study the elaboration of cellulose acetate polymer-based membranes for their application in the removal of a sulfhydryl groups of real biological treated wastewaters. The addition of nanoparticles to membranes improves the water purification capacity by promoting a good separation of sulfur, more particularly by ZnO-NPs. We used ultrafiltration membrane-assisted ZnO and TiO₂ NPs application on real effluents from different biological treatment plants. We identified the hydrosulfite (thiol) group in wastewater and we used membrane processes ultrafiltration technique for sulfur removal. We evaluated the degradation of sulfur in biological treatment plants in Tunisia: The urban wastewater treatment plant or the conventional plant of Rades Malienne is a secondary biological wastewater treatment plant noted STEP1. The rural wastewater treatment plant based vertical flow planted with Phragmites australis from the Grombalia region noted STEP2 and rural wastewater treatment plant based horizontal flow planted with Phragmites australis from the Grombalia region noted STEP3. STEP1 is found to be more loaded with sulfur. Application of AC-ZnO membrane gives 99.07% and 99.55% of sulfur removal from wastewater of STEP1 and STEP3. STEP3 is 50 times less charged on sulfur than STEP1. We suggested that when the sulfur content is high, this leads to an increase in mineral elements. This could be explained by the interactions between thiols and the major elements that cause mineral pollution.     

城市污水处理过程中有机污染物三维荧光特性的变化规律

采用三维荧光光谱法研究了城市污水处理过程中溶解性有机物的三维荧光特性变化规律。研究结果表明,生活污水中荧光类溶解性有机物主要以类蛋白有机物、UV腐殖质和可见腐殖质为主;污水生物处理前后特征荧光峰中心位置和强度均发生明显的改变,表明污水中有机物的相对组成和含量随生物处理过程而变化。三维特征荧光参数可以反映污水处理过程中污染物的种类、性质和含量变化等丰富信息。其测定迅速简便、灵敏度高,可用于污水处理效果的定性分析、定量评价,易于实现污水处理过程的实时在线监测,指导污水处理工艺的设计、运行、管理和控制。     

Sorbent extraction behavior of a nonionic surfactant,Triton X-100, onto commercial charcoal from low level radioactive waste

In nuclear power plants and nuclear laboratories, laundry wastewater is generated from decontaminating polluted instruments, worker’s clothes and taking shower after work. Laundry wastewater contains radionuclides and surfactants. The surfactants included in laundry wastewater affect the extraction of radionuclides. Therefore, surfactants should be removed before extraction of radionuclides. The objective of the present work is to assess the ability of commercial charcoal for the removal of nonionic surfactants, where, commercial charcoal is a commonly available adsorbent for treatment. Charcoal was characterized using different analytical techniques. The isotherm models and thermodynamic parameters were evaluated. Charcoal was applied to the removal of surfactant from liquid radioactive waste. The data obtained can be used for designing a plant for treatment of surfactant rich water and wastewater economically.     

The application of ultrafiltration for treatment of ships generated oily wastewater

The wastewaters collected from ships were preliminary separated in harbour installation into an oil fraction (slop oil) and the aqueous phase. The oil phase was then separated from slop oil, and the resulting water phase was subjected to the treatment in a coagulation/flotation process. The effluent (oil content 7–13 ppm) from these processes was further purified in biological wastewater treatment plant. A composition of bilge water is variable what affects the efficiency of coagulation/flotation process and the effluents may contain a significant amount of oil residues. The purification of effluents from coagulation/flotation process was performed in this work with ultrafiltration (UF), using FP100 membranes. The turbidity of obtained UF permeate was varied in the range of 0.08–0.26 NTU and the oil content was at a level of 0.9–1.1 ppm. Such purified water can be utilized for rinsing the oil–water separation devices located in the wastewater treatment plant, instead of tap water used so far. The obtained UF retentate contained 30 ppm of oil can be recycled to the coagulation/flotation process. Fouling of UF membranes was observed during the separation process, however, the FP100 membranes were effective cleaned with alkaline cleaning agents P3 Ultrasil 11.     

Long-term operation of a domestic wastewater treatment plant with membrane filtration

Possibilities of membrane technology and the use of membrane processes in wastewater treatment were investigated. The main focus was the monitoring of the starting phase of a domestic wastewater treatment plant. Experimental part of the study was realized at the municipal wastewater treatment plant (WWTP) Devínska Nová Ves — Bratislava during the period from February 2005 to September 2006. The system was stable without any external chemical treatment of the membrane modules and the permeate quality was very high. Observed decrease of COD and BOD₅ values ranged between 91 % and 98 %. The process of nitrification was very successful considering its high efficiency (> 95 %). Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

Assessment of the fate of some household micropollutants in urban wastewater treatment plant

Everyday domestic activity is a significant source of water pollution. The presence of six household micropollutants in an urban wastewater treatment plant (WWTP) was assessed in wastewater and sludge. A multi-target analytical method was developed for the quantification of ibuprofen, erythromycin, ofloxacin, 4-nonylphenol, 5-chloro-2-(2,4-dichlorophenoxy)phenol (triclosan), and sucralose. The micropollutants were extracted from the liquid and solid phases and their concentrations were determined by LC-MS/MS. The efficiency of micropollutants’ removal within a conventional activated sludge process was assessed. From 50 % to 90 % of ibuprofen and erythromycin was removed from the wastewater liquid phase. Their removal can be attributed to biological degradation as they were not found adsorbed on the outlet sludge. Ofloxacin and triclosan were removed from the liquid phase with similar efficiencies; however, they were adsorbed on the sludge, so it was not possible to determine their removal mechanism (whether biodegradation or displacement to solid phase/sequestration). Sucralose was not removed from wastewater (3 μg L^?1 in inlet and outlet liquid phase) and not adsorbed on the sludge. 4-Nonylphenol concentrations were sometimes higher in the WWTP outlet water; this may relate to the degradation of alkylphenol ethoxylates in the wastewater treatment process. 4-Nonylphenol was always present in the outlet sludge.     

Anaerobically treated wastewater in agricultural irrigation as an alternative for posttreatment in water-demanding zones

Agroindustries usually produce high amounts of wastewaters and are frequently located close to agricultural activities. Agricultural use of treated wastewaters therefore represents a unique opportunity to solve the problem of water supply for irrigation and disposal of treated water at the same time. This article is the result of collaborative work with the biggest Chilean pisco-(a distillated drink prepared from Muscatel wine) producing company at present. Experiments were conducted to establish anaerobic treatability of wastewaters and also irrigation properties of treated water. With the purpose of confirming laboratory results, a full-scale anaerobic plant was built, and treated water is being used to irrigate 3000 eucalypti. The results showed, at both laboratory and full scale, that anaerobic treatment is suitable for the treatment of pisco wastewater, and that nutrient content of treated water can be beneficial for plant growth, reducing the need for fertilizers.     

Fully automated determination of N-nitrosamines in environmental waters by headspace solid-phase microextraction followed by GC-MS-MS

A fully automated method for determining nine Environmental Protection Agency N-nitrosamines in several types of environmental waters at ng/L levels is presented. The method is based on a headspace solid-phase microextraction followed by GC-MS-MS using chemical ionization. Three different fibers (carboxen/PDMS, divinylbenzene/carboxen/PDMS, and PEG) were tested. Solid-phase microextraction conditions were best when a divinylbenzene/carboxen/PDMS fiber was exposed for 60?min in the headspace of 10?mL water samples at pH 7 containing 360?g/L of NaCl, at 45°C. All compounds were analyzed by GC-MS-MS within 18?min. The method was validated using effluent from an urban wastewater treatment plant and the LODs ranged from 1 to 5?ng/L. The method was then applied to determine the N-nitrosamines in samples of different complexities, such as tap water and several influent and effluent wastewater samples from urban and industrial wastewater treatment plants and a potable water treatment plant. Although the analysis of influent industrial wastewater revealed high concentrations of some compounds (N-nitrosomorpholine and N-nitrosodimethylamine at μg/L levels), in industrial effluents and other samples, the concentrations were substantially lower (ng/L levels). The new method is suitable for the simple and reliable determination of N-nitrosamines in highly complex water samples in a completely automated procedure.     

Environmental monitoring of wastewater using capillary ion electrophoresis

Capillary ion electrophoresis (CIE) is a capillary electrophoretic technique which has been developed for the rapid analysis of low-molecular-mass inorganic and organic ions. Anion and cation analysis of wastewater samples from a meat processing plant will be discussed. The wastewater samples were collected above, at point of discharge, and at various points downstream from the plant. The purpose of the analysis was to investigate dilution effects of the wastewater as it mixes with the stream water. CIE allows for rapid analysis times (typically less than 5 min) with little sample preparation required.     

New trends in removing heavy metals from industrial wastewater

Innovative processes for treating industrial wastewater containing heavy metals often involve technologies for reduction of toxicity in order to meet technology-based treatment standards. This article reviews the recent developments and technical applicability of various treatments for the removal of heavy metals from industrial wastewater. A particular focus is given to innovative physico-chemical removal processes such as; adsorption on new adsorbents, membrane filtration, electrodialysis, and photocatalysis. Their advantages and limitations in application are evaluated. The main operating conditions such as pH and treatment performance are presented. Published studies of 94 cited references (1999–2008) are reviewed.It is evident from survey that new adsorbents and membrane filtration are the most frequently studied and widely applied for the treatment of metal-contaminated wastewater. However, in the near future, the most promising methods to treat such complex systems will be the photocatalytic ones which consume cheap photons from the UV-near visible region. They induce both degradation of organic pollutants and recovery of metals in one-pot systems. On the other hand, from the conventional processes, lime precipitation has been found as one of the most effective means to treat inorganic effluent with a metal concentration of >1000 mg/L. It is important to note that the overall treatment cost of metal-contaminated water varies, depending on the process employed and the local conditions. In general, the technical applicability, plant simplicity and cost-effectiveness are the key factors in selecting the most suitable treatment for inorganic effluent     

Native biofilm cultured under controllable condition and used in mediated method for BOD measurement

In this article, we developed a native biofilm (NBF) bioreactor used for biochemical oxygen demand mediated method (BOD_Med). There were two innovations differed from previous BOD_Med assay. Firstly, the immobilization of microorganisms was adopted in BOD_Med. Secondly, the NBF was introduced for BOD measurement. The NBF bioreactor has been characterized by optical microscopy. A culture condition of NBF with 24 h, 35 °C and pH 7 was optimized. Furthermore, a measuring condition with 35 °C, pH 7 and 55 mM ferricyanide in 1 h incubation were optimized. Based on the optimized condition, the real wastewater samples from local sewage treatment plant had been measured. Performances of the NBFs proposed at different culture conditions were recorded for 110 d, and the results indicated that long-term storage stability was obtained. With the proposed method, an uncontaminated native microbial source solution can be obtained from a wastewater treatment plant. In this way, we can ensure that the microbial species of all in the NBF are same as that in the target to be measured.     

Combined biological and chemical assessment of estrogenic activities in wastewater treatment plant effluents

Five wastewater treatment plant effluents were analyzed for known endocrine disrupters and estrogenicity. Estrogenicity was determined by using the yeast estrogen screen (YES) and by measuring the blood plasma vitellogenin (VTG) concentrations in exposed male rainbow trout (Oncorhynchus mykiss). While all wastewater treatment plant effluents contained measurable concentrations of estrogens and gave a positive response with the YES, only at two sites did the male fish have significantly increased VTG blood plasma concentrations after the exposure, compared to pre-exposure concentrations. Estrone (E1) concentrations ranged up to 51 ng L^–1, estradiol (E2) up to 6 ng L^–1, and ethinylestradiol (EE2) up to 2 ng L^–1 in the 90 samples analyzed. Alkylphenols, alkylphenolmonoethoxylates and alkylphenoldiethoxylates, even though found at µg L^–1 concentrations in effluents from wastewater treatment plants with a significant industrial content, did not contribute much to the overall estrogenicity of the samples taken due to their low relative potency. Expected estrogenicities were calculated from the chemical data for each sample by using the principle of concentration additivity and relative potencies of the various chemicals as determined with the yeast estrogen screen. Measured and calculated estradiol equivalents gave the same order of magnitude and correlated rather well (R ²=0.6).An erratum to this article can be found at     

Operation of industrial-scale electron beam wastewater treatment plant

Textile dyeing processes consume large amount of water, steam and discharge filthy and colored wastewater. A pilot scale e-beam plant with an electron accelerator of 1 MeV, 40 kW had constructed at Daegu Dyeing Industrial Complex (DDIC) in 1997 for treating 1,000 m³ per day. Continuous operation of this plant showed the preliminary e-beam treatment reduced bio-treatment time and resulted in more significant decreasing TOC, COD_Cr, and BOD₅. Convinced of the economics and efficiency of the process, a commercial plant with 1 MeV, 400 kW electron accelerator has constructed in 2005. This plant improves the removal efficiency of wastewater with decreasing the retention time in bio-treatment at around 1 kGy. This plant is located on the area of existing wastewater treatment facility in DDIC and the treatment capacity is 10,000 m³ of wastewater per day. The total construction cost for this plant was USD 4 M and the operation cost has been obtained was not more than USD 1 M per year and about USD 0.3 per each m³ of wastewater.     

Evidence for Phytoremediation and Phytoexcretion of NTO from Industrial Wastewater by Vetiver Grass

The use of insensitive munitions such as 3-nitro-1,2,4-triazol-5-one (NTO) is rapidly increasing and is expected to replace conventional munitions in the near future. Various NTO treatment technologies are being developed for the treatment of wastewater from industrial munition facilities. This is the first study to explore the potential phytoremediation of industrial NTO-wastewater using vetiver grass (Chrysopogon zizanioides L.). Here, we present evidence that vetiver can effectively remove NTO from wastewater, and also translocated NTO from root to shoot. NTO was phytotoxic and resulted in a loss of plant biomass and chlorophyll. The metabolomic analysis showed significant differences between treated and control samples, with the upregulation of specific pathways such as glycerophosphate metabolism and amino acid metabolism, providing a glimpse into the stress alleviation strategy of vetiver. One of the mechanisms of NTO stress reduction was the excretion of solid crystals. Scanning electron microscopy (SEM), electrospray ionization mass spectrometry (ESI-MS), and Fourier-transform infrared spectroscopy (FTIR) analysis confirmed the presence of NTO crystals in the plant exudates. Further characterization of the exudates is in progress to ascertain the purity of these crystals, and if vetiver could be used for phytomining NTO from industrial wastewater.     

Whole cell immobilised biosensors for toxicity assessment of a wastewater treatment plant treating phenolics-containing waste

Wastewater treatment plants dealing with industrial wastes are often susceptible to overload of toxic influent that can partially or completely destroy treatment for extended periods. An obvious candidate for monitoring toxicity in such wastewater systems is bioluminescent bacteria. However, the natural bioluminescent bacteria can be particularly sensitive to some industrial wastes and therefore their response to normal operational conditions does not reflect the status of the microbial community responsible for treatment. Moreover, the salt dependence of the marine bioluminescent bacteria, and the temperature sensitivity of some strains, further complicate their use. Here we describe the construction of whole cell genetically modified bioluminescent biosensors and their immobilisation for use in monitoring the toxicity of a complex industrial wastewater containing phenolic materials. A hand-held luminometer was designed for laboratory or field use, and the immobilisation system designed with several things in mind: the geometry of the instrument; the need for containment of GM bacteria; the maximisation of the bioavailability of the wastewater to the biosensor. The performance of a candidate GM sensor was compared with Vibrio fischeri in liquid culture and after immobilisation in thin films of poly(vinyl alcohol) (PVA) cryogels. The biosensors were tested against pure phenol and 3-chlorophenol as a reference toxic chemical known to be much more toxic to bacteria than phenol. The biosensors were then tested with the phenolics-containing industrial wastewater. The immobilisation system proved to operate predictably with pure toxicants, and was able to discriminate toxicity of various zones within the wastewater treatment plant.     

Stereoisomer quantification of the beta-blocker drugs atenolol, metoprolol, and propranolol in wastewaters by chiral high-performance liquid chromatography-tandem mass spectrometry

A chiral liquid chromatography-tandem mass spectrometry (HPLC-MS-MS) method was developed and validated for measuring individual enantiomers of three beta-blocker drugs (atenolol, metoprolol, and propranolol) in wastewater treatment plant (WWTP) influents and effluents. Mean recoveries of the pharmaceuticals ranged from 67 to 106%, and the limits of detection of the analytes were 2-17 ng/L in wastewater effluents. The method was demonstrated by measuring, for the first time, the stereoisomer composition of target analytes in raw and treated wastewaters of two Canadian WWTPs. In these trials, racemic amounts of the three drugs were observed in influent of one wastewater treatment plant, but nonracemic amounts were observed in another. Effluents of the two plants contained nonracemic amounts of the drugs. These results indicate that biologically-mediated stereoselective processes that differ among WWTPs had occurred to eliminate individual enantiomers of the target analytes.     

生物膜电极反应器降解对氨基二甲基苯胺的研究

采用生物膜电极法降解对氨基二甲基苯胺, 并与生物法降解和电化学降解的效果进行了比较.