沉淀还原法制备高性能CO2加氢合成甲醇Cu/ZnO/Al2O3催化剂

由铜基催化剂催化CO2+H2合成甲醇是有效利用CO2的潜在途径[1～5]. 但传统的催化剂对该反应的催化活性及选择性均很低[3～5], 因而寻求具有高活性及高选择性的新型催化剂已成为重要研究课题[4,6]. Cu/ZnO系列催化剂的制备方法和助剂对催化剂的性质及CO2加氢合成甲醇的反应性能有显著影响[6～10], 传统的气相还原活化铜基催化剂的过程常伴随强烈的热效应, 导致催化剂活化过程存在耗时长及还原条件难以控制等问题[11]. 本文采用沉淀-还原法, 用KBH4溶液对新鲜制备的碳酸盐共沉淀进行液相化学还原处理, 直接得到高活性及高选择性的还原态Cu/ZnO/Al2O3甲醇合成催化剂, 并可通过改变催化剂表面Cu+/Cu0活性物种的相对比例来改善催化剂的活性及选择性.     

CONCURRENT SYNTHESIS OF METHANOL AND METHYLFORMATE CATALYZED BY COPPER-BASED CATALYSTS III. INFLUENCES OF CONCENTRATIONS OF CATALYSTSAND PROMOTERS

The influences of concentrations of catalysts and promoters on the catalytic activity and methyl formate selectivity in the cocurrent synthesis of methanol and methyl formate from synthesis gas at low temperature and pressure in a slurry phase catalyzed heterogeneously by copper-based catalysts have been studied. The experimental results exhibit that the catalytic activity goes up regularly with the increase of catalyst concentration and promoter concentration in the experimental range over all the tested catalysts.     

Clean and selective oxidation of alcohols catalyzed by ion-supported TEMPO in water

Three different types of ion-supported TEMPO catalysts are synthesized and their catalytic activity in the chemoselective oxidation of alcohols is investigated. These new catalysts show high catalytic activity in water and can be reused for the next run by extraction of products. Recycling experiments exhibit that ion-supported TEMPO can be reused up to five times without loss of catalytic activity. This system offers a very clean, convenient, environmentally benign method for the selective oxidation of alcohols.     

One-step electrodeposition of platinum nanoflowers and their high efficient catalytic activity for methanol electro-oxidation

A facile, one-step and template-free electrodeposition method has been developed for the first time to prepare porous Pt nanoflowers. The flowerlike architectures were confirmed by SEM, and further structurally characterized by XRD and electrochemical analyses. Compared to conventional nanosized Pt catalysts, as-prepared Pt nanoflowers exhibit remarkably higher catalytic activity and stronger poisoning-tolerance for the methanol electro-oxidation, and thus they are anticipated to find interesting applications in many important fields such as energy and catalysis.     

Carbon Nanotubes Supported Pt-Ru-Ni as Methanol Electro-Oxidation Catalyst for Direct Methanol Fuel Cells

Carbon nanotubes (CNTs) supported Pt-Ru and Pt-Ru-Ni catalysts were prepared by chemical reduction of metal precursors with sodium borohydride at room temperature. The crystallographic properties and composition of the catalysts were characterized by X-ray diffraction (XRD) and energy dispersive X-ray (EDX) analysis, and the catalytic activity and stability for methanol electro-oxidation were measured by electrochemical impedance spectroscopy (EIS), linear sweep voltammetries (LSV), and chronoamperometry (CA). The results show that the catalysts exhibit face-centered cubic (fcc) structure. The particle size of Pt-Ru-Ni/CNTs catalyst is about 4.8 nm. The catalytic activity and stability of the Pt-Ru-Ni/CNTs catalyst are higher than those of Pt-Ru/CNTs catalyst.     

A facile chemical reduction method for synthesis of platinum–iron catalysts on carbon fiber papers for methanol oxidation

To enhance catalytic activity and durability for methanol oxidation reaction (MOR), we have fabricated bimetallic Pt–Fe catalysts on carbon fiber papers (denoted as Pt–Fe@CFP) by a facile chemical reduction method using iron as the precursor, ascorbic acid and sodium hypophosphite as the reductants, respectively. When ascorbic acid is using as the reductant, the Pt–Fe@CFP catalysts are composed of platinum and disordered Pt–Fe phases. The atomic ratio between Pt and Fe can be adjusted by altering deposition conditions. The Pt–Fe@CFP catalysts with Pt/Fe ratio of 1.1, which deposited with surfactant CTAB in bath at room temperature, exhibit excellent catalytic activity and stability in MOR. However, when sodium hypophosphite is employed as the reductant, the co-deposition of phosphorus would lead to a decreased catalytic performance in MOR.     

酸性电解水过程中氧析出反应的机理及铱基催化剂的研究进展北大核心CSCD

可持续能源的迅速发展,使绿色清洁的氢能源成为热点。质子交换膜(PEM)水电解是一项很有前途的技术,可高效生产高纯度氢气。IrO_(2)作为质子交换膜(PEM)水电解槽阳极氧析出反应(OER)的商用电催化剂,既能在强酸性、高强度腐蚀条件下保持稳定,又表现出优异的催化性能。然而,由于Ir的稀缺性和昂贵的价格,提高Ir基催化剂的OER活性,开发低Ir催化剂就显得至关重要。对其反应机理的认知是当前的研究热点之一,也是设计优异的OER催化剂的关键所在。因此,首先从OER机理出发,对目前被广泛认可的吸附物逸出机理(AEM)和晶格氧逸出机理(LOER)两种反应机理进行了研究。随后,根据所提出的这两种机理,介绍了OER催化剂设计的基本准则,即调控Ir基催化剂的电子结构,改善反应中间物种在催化活性位点上的吸附能,从而提高OER催化活性。并从催化剂的结构设计、形貌控制、载体材料3个方面简单概述了最近OER催化剂的研究进展。最后,在已有研究的基础上,提出了目前OER催化剂面临的困难与挑战,这为以后相关的研究指明了方向。     

Pd/CexZr1-xO2/SiO2催化剂的制备及其甲烷催化燃烧性能的研究

采用浸渍法制备了Pd质量分数为0.1%~1.0%的Pd/SiO2和Pd/5%CexZr1-xO2/SiO2（x0.0~1.0）系列催化剂,在微型固定床反应器上对催化剂的甲烷催化燃烧性能进行了评价,用XRD、H2-TPR等分析测试技术对催化剂的结构进行了表征。结果表明,Pd/SiO2和Pd/CexZr1-xO2/SiO2催化剂都具有较好的甲烷催化燃烧活性,CexZr1-xO2可以明显提高催化剂的催化活性,并且Ce和Zr的比值对催化剂催化活性也有显著的影响。XRD和TPR显示,Pd/CexZr1-xO2/SiO2催化剂中的CexZr1-xO2对PdO的分散性和还原性有较好的促进作用。     

Catalytic oxidation of glyoxal to glyoxalic acid over Au-Pd alloy nanoparticles on hydrotalcite

Synthesis of glyoxalic acid by selective oxidation of glyoxal at ambient temperatures with O₂ as an oxidant is an important problem. We found that gold nanoparticles supported on hydrotalcite (Au/HT) exhibit an appreciable catalytic activity for this reaction in the liquid phase. Moreover, Au-Pd/HT, prepared by the deposition-precipitation method is superior in the catalytic behavior to monometallic Au/HT and Pd/HT catalysts. Introduction of palladium enhances ability of the catalysts to oxidize carbonyl to carboxyl, weakens the power to rupture C-C bond and in this way improves the catalytic performance. Furthermore, the Au: Pd ratio also influences the properties of the alloy catalysts. The 1.5Au-1.5Pd/HT catalysts show the highest activity for the selective oxidation at ambient temperature producing glyoxalic acid in 13.4% yield at pH 7.7. Moreover, due to basic properties of hydrotalcite, glyoxalic acid could be synthesized over 1.5Au-1.5Pd/HT in 8.0% yield without adding a base. It is hoped that results of this study can fuel further research in designing new catalysts with alloy nanoparticles supported by hydrotalcite that can be used for the selective oxidation of other useful compounds.     

Catalytic palladium nanoparticles supported on nanoscale MOFs: a highly active catalyst for Suzuki–Miyaura cross-coupling reaction

Pd nanoparticles have been successfully supported on nanoscale metal-organic frameworks (NMOFs) by using a simple and effective microwave-assisted impregnation process. The resulting composite, representing as a highly active NMOFs supported metal nanoparticles catalyst for the Suzuki cross-coupling reaction between aryl/heteroaryl halides and arylboronic acids, is well characterized, and its high activity and good recyclability are discussed in details. It reveals that, compared to the corresponding bulk MOFs and conventional active carbon materials, nanoscale MOFs as novel support materials for heterogeneous catalysts can exhibit superior performance in the catalytic reactions.     

Heterogeneous organocatalysis at work: functionalization of hollow periodic mesoporous organosilica spheres with MacMillan catalyst

We report a new method for the synthesis of hollow-structured phenylene-bridged periodic mesoporous organosilica (PMO) spheres with a uniform particle size of 100-200 nm using α-Fe(2)O(3) as a hard template. Based on this method, the hollow-structured phenylene PMO could be easily functionalized with MacMillan catalyst (H-PhPMO-Mac) by a co-condensation process and a "click chemistry" post-modification. The synthesized H-PhPMO-Mac catalyst has been found to exhibit high catalytic activity (98% yield, 81% enantiomeric excess (ee) for endo and 81% ee for exo) in asymmetric Diels-Alder reactions with water as solvent. The catalyst could be reused for at least seven runs without a significant loss of catalytic activity. Our results have also indicated that hollow-structured PMO spheres exhibit higher catalytic efficiency than solid (non-hollow) PMO spheres, and that catalysts prepared by the co-condensation process and "click chemistry" post-modification exhibit higher catalytic efficiency than those prepared by a grafting method.     

柠檬酸络合浸渍法制备的Ag-Mn/γ-Al_2O_3-TiO_2催化剂用于丙烷催化燃烧

采用不同浸渍方法制备了系列Ag-Mn/γ-Al_2O_3-TiO_2催化剂,利用BET、XRD、TEM、XPS和H_2-TPR等技术对催化剂进行了表征,通过丙烷催化燃烧反应考察了催化性能。结果表明,与常规浸渍法相比,柠檬酸络合浸渍法促进了催化剂表面Ag与Mn颗粒的分散及加强了Ag与Mn之间的相互作用,从而提高了活性氧物种的相对含量和催化剂的低温还原性能,进而促进丙烷催化燃烧活性的提升。其中,络合浸渍法制备的Ag_1Mn_3/γ-Al_2O_3-TiO_2催化剂在263℃时丙烷转化率即可达90%。     

Au/TS-1选择性催化氧化NO性能研究

制备了负载型Au/TS-1催化剂,采用XRD、SEM、TEM等方法进行了表征,并将其应用于选择性催化氧化NO反应,考察了各工艺条件对NO催化氧化效率的影响。结果表明,Au/TS-1催化剂具有良好的结晶度,Au粒子成功地负载在TS-1上。该催化剂在选择性催化氧化NO反应中具有优异的低温催化氧化活性,在NO体积分数为1×10-3,O2含量为10%,空速为5 000 h-1,Au的负载量为1.0%,180℃时,NO的氧化率高于55%(此时最适宜吸收处理);260℃时,氧化率可达到78%。     

分子筛限域金属纳米粒子及其氧化还原反应应用的研究进展

沸石分子筛是一类孔隙均匀、结晶度高、结构多样、比表面积大的材料,在催化、分离、吸附等方面得到了广泛的应用。沸石分子筛已被证明是金属纳米粒子(MNPs)的理想载体。金属纳米粒子@沸石分子筛催化剂不仅表现出优异的催化活性,而且具有较高的稳定性和择形催化性。此外,限域的金属纳米粒子与具有活性位点的纳米孔骨架的协同作用可以进一步提高复合催化剂的催化活性。金属纳米粒子@沸石分子筛催化剂由于具有较高的活性、择形性和热稳定性等优点,在工业相关应用中引起了人们的极大关注。本文综述了金属纳米粒子@沸石分子筛催化剂的研究进展,重点介绍了多种合成方法以及其在氢化和氧化反应中的应用进展。指出了金属纳米粒子@沸石分子筛催化剂领域存在的问题和挑战并对其未来发展进行展望。     

Highly active and reusable heterogeneous catalysts for acylation of anisole

In the present study, non-conventional solid acid catalysts such as NaY, metal ion exchanged zeolite NaY (Zn²⁺, Fe³⁺, Ce³⁺, La³⁺ and Nd³⁺), H-mordenite, H-β and HZSM-5 were used in order to overcome the disadvantages of conventional Friedel-Crafts catalysts for the acylation of anisole with acetic anhydride. Among the various zeolites studied, the HY zeolite shows an intermediate activity. Zeolite containing transition metal ions (Zn²⁺ and Fe³⁺) are less active and zeolite NaY is nearly inactive. The catalysts exhibit the activity in the order H-β>transition metal ions (Zn²⁺ and Fe³⁺)>HY>NaY zeolite. The highest catalytic activity of H-β could be due to its larger pore size. The type of acidity and the acid strength in zeolite Y were determined by FTIR and differential scanning calorimetric (DSC) studies on the pyridine adsorbed catalysts. The correlation of catalytic activity with acidity reveals that Brönsted acid sites in zeolite promote the acylation of anisole.     

Effects of Catalyst Heating Rates Upon the Activity of Silica-Supported Silicomolybdic Acid Catalysts for Methane Partial Oxidation

Silica-supported silicomolybdic acid (SMA) catalysts showed a very high activity for partial oxidation of methane into formaldehyde at 873 K in the presence of an excess amount of water vapor in feed. However, the high activity was observed only when the catalysts were heated to 873 K with very high heating rates such as 100 K min^-1. In this article, the reason why these high heating rates are necessary to exhibit the higher catalytic activity into formaldehyde will be discussed based on the structural changes in SMA during heating the catalysts to 873 K.     

CeO2‐Based Pd(Pt) Nanoparticles Grafted onto Fe3O4/Graphene: A General Self‐Assembly Approach To Fabricate Highly Efficient Catalysts with Magnetic Recyclable Capability

New Pd(Pt) catalysts have been fabricated by assembling multicomponents of Fe₃O₄ and CeO₂/Pd(Pt) on the surface of reduced graphene oxide (RGO) nanosheets in layers. The as‐obtained Pd(Pt) catalysts exhibit extremely high catalytic activity in the selective hydrogenation reaction of nitrobenzene. Owing to the presence of Fe₃O₄, the catalysts can be easily recycled from the catalytic system through magnetic separation. Their high activity, stability, and magnetic recyclability make the as‐obtained hybrids very promising as catalysts in catalytic applications. Compared to other traditional multishell magnetic catalysts that were prepared by means of layer‐by‐layer technology, our process is much more facile and more easily controlled.     

Bamboo‐Like Nitrogen‐Doped Carbon Nanotubes with Co Nanoparticles Encapsulated at the Tips: Uniform and Large‐Scale Synthesis and High‐Performance Electrocatalysts for Oxygen Reduction

In recent years, various non‐precious metal electrocatalysts for the oxygen reduction reaction (ORR) have been extensively investigated. The development of an efficient and simple method to synthesize non‐precious metal catalysts with ORR activity superior to that of Pt is extremely significant for large‐scale applications of fuel cells. Here, we develop a facile, low‐cost, and large‐scale synthesis method for uniform nitrogen‐doped (N‐doped) bamboo‐like CNTs (NBCNT) with Co nanoparticles encapsulated at the tips by annealing a mixture of cobalt acetate and melamine. The uniform NBCNT shows better ORR catalytic activity and higher stability in alkaline solutions as compared with commercial Pt/C and comparable catalytic activity to Pt/C in acidic media. NBCNTs exhibit outstanding ORR catalytic activity due to high defect density, uniform bamboo‐like structure, and the synergistic effect between the Co nanoparticles and protective graphitic layers. This facile method to synthesize catalysts, which is amenable to the large‐scale commercialization of fuel cells, will open a new avenue for the development of low‐cost and high‐performance ORR catalysts to replace Pt‐based catalysts for applications in energy conversion.     

负载型Pd/SnO2催化剂低温催化甲烷燃烧

天然气储量巨大,被广泛应用于发电和工业窑炉等.甲烷作为天然气中最主要的成分,是氢碳比最高的碳氢化合物,其温室效应显著.因此,不完全燃烧所引起的CH4排放,不仅导致能源浪费,同时也可造成环境污染.与传统火焰燃烧相比,CH4催化燃烧具有更高的燃烧效率,并可显著地减少大气污染物(CO,NOx和未完全燃烧的烃类)的排放.贵金属Pd催化剂对CH4催化燃烧表现出优异的催化性能,其中Pd颗粒的尺寸、Pd的化学状态、载体性质及其与Pd之间的相互作用等对其活性有显著影响.本文以不同温度(600,800,1000和1200℃)焙烧所得SnO2为载体,通过等体积浸渍法制备了Pd/SnO2催化剂,研究了SnO2焙烧温度对CH4催化燃烧性能的影响.结果表明,所制备的SnO2均为锐钛矿结构,并且随着SnO2焙烧温度的升高,晶型愈加完美,晶粒尺寸显著增大.催化剂中引入的Pd以高分散形式存在,CH4催化燃烧反应活性随着载体SnO2焙烧温度的升高而显著提高,其中Pd/SnO2(1200)表现出最高的CH4燃烧活性,起燃温度和最低全转化温度分别为265和390℃.在反应温度为300℃时,Pd/SnO2(1200)上甲烷的反应速率是Pd/SnO2(600)的36倍.XPS等结果表明,随着SnO2焙烧温度的升高,Pd的化学状态也有所差异:对于低温焙烧的SnO2(<800℃),Pd以Pd4+的形式进入到SnO2晶格内;随着焙烧温度的升高(>1000℃),Pd以Pd2+物种的形式存在于载体表面.结合活性评价结果推测,Pd的化学状态可能并非是影响催化剂活性的最关键因素.TEM等结果表明,Pd/SnO2(1000)上PdO的(101)晶面与载体SnO2的(101)晶面相近,分别为0.2641 nm和0.2638 nm.O2-TPD和CH4-TPR结果表明,Pd/SnO2(1200)催化剂上单位Pd原子上O2的脱附量是Pd/SnO2(600)的3倍,单位Pd原子上CH4的消耗量比催化剂Pd/SnO2(600)高出45%.因此,PdO和SnO2在构型上存在的晶面匹配可提高催化剂对O2的活化能力.综上所述,SnO2和贵金属之间的晶格匹配有利于氧在Pd-SnO2界面的活化,同时载体SnO2中的晶格氧亦可以通过"氧反溢流机理"补充到表面PdO/Pd上,从而增强催化剂对O2的吸附和活化能力,并提高CH4催化燃烧反应性能.升高SnO2的焙烧温度可强化SnO2和贵金属之间的晶格匹配,从而使催化剂活性随着SnO2焙烧温度升高而增大.     

CuxCo1-x/Al2O3/堇青石整体式催化剂的制备及其催化甲苯燃烧性能

以堇青石蜂窝陶瓷为基底,A12O3浆料为过渡胶体,Cu和Co为催化活性组分,制备了一系列CuxCo1-x/Al2O3/堇青石(x=0～1)整体式催化剂.采用X射线衍射、X射线光电子能谱、扫描电镜和程序升温还原等手段对催化剂进行了表征.以甲苯为模型化合物.在微型固定床反应器上评价了催化剂的催化性能.结果表明,当Cu含量较...