Anion-Dependent Outstanding Luminescence Enhancement of Eu(D-facam)3 Upon Coexistence With the Tetramethylammonium Cation

The effect of a series of tetramethylammonium salts with different counter anions on the photophysical properties of a chiral Eu(III) complex (Eu(D-facam)₃) was investigated. Anion-dependent luminescence of the Eu(III) complex was observed, and particularly in the presence of acetate ions, an outstanding luminescence enhancement (>300 times) and induced circularly polarized luminescence (g_lum=−0.63) were obtained. The energy transfer process was then evaluated using key photophysical parameters, and it was found that the sensitisation efficiency of the Eu(III) complex significantly increased in the presence of tetramethylammonium acetate (TMAOAc). The interactions between Eu(D-facam)₃ and TMAOAc were confirmed by luminescence analysis, circular dichroism spectroscopy, Fourier transform infrared spectroscopy and mass spectral measurements.     

Synthesis and characterization of Ln,Yb:BaGdF5 (Ln = Er,Ho) nanocrystals by hydrothermal method

The Er,Yb: BaGdF₅ and Ho,Yb: BaGdF₅ nanocrystal materials with the narrow particle size distribution was synthesized by a hydrothermal method at 180°C for 24 h. The phase structure and fluorescence properties were investigated by X-ray diffraction, scanning electron microscopy and up-conversion spectroscopy, respectively. The phase composition does not change with increasing the pH value, leading to the formation of a pure phase BaGdF₅, while the solution was turbid state. The products show a good crystallinity, dispersion and uniform particle size distribution. Under the LD excitation at 980 nm, Er,Yb: BaGdF₅ and Ho,Yb: BaGdF₅ nanocrystal materials were researched in the visible range of the fluorescence spectrum. Er,Yb: BaGdF₅ nanocrystals were achieved the launch of green, blue, and red. Ho,Yb: BaGdF₅ nanocrystal with green and red light output were realized. The light-emitting belong to the two-photon transition process. And the possible mechanism for the corresponding up-conversion luminescence was also discussed. The Er,Yb: BaGdF₅ and Ho,Yb: BaYbF₅ nanocrystals with the narrow particle size distribution have potential applications in biological field as luminescence probes.

     

Comparative studies for the effect of intercalating agent on the physical properties of epoxy resin-clay based nanocomposite materials

In this study, a series of comparative studies for the effect of intercalating agent on the physical properties of the epoxy resin-clay based nanocomposite materials were performed. First, the quaternary alkylphosphonium and alkylammonium salt were both used as the intercalating agents separately for the preparation of organophilic clay through the cationic exchange reactions with Na⁺-montmorillonite clay. Subsequently, the organophilic clay was blent into the epoxy resin through in-situ thermal ring-opening polymerizations to prepare a series of polymer-clay nanocomposite (PCN) materials. The as-synthesized PCN materials were subsequently characterized by Fourier-Transformation infrared (FTIR) spectroscopy, wide-angle powder X-ray diffraction (WXRD), and transmission electron microscopy (TEM).It should be noted that the quaternary alkylphosphonium salt (Φ₃P⁺-C₁₂)-modified clay was found to show better dispersion capability than that of quaternary alkylammonium salt (Me₃N⁺-C₁₆)-modified clay existed in the polymer matrix based on the studies of WXRD and TEM. The better dispersion of (Φ₃P⁺-C₁₂)-modified clay in epoxy resin was found to lead more effectively enhanced physical property such as corrosion protection, gas barrier, mechanical strength, thermal stability, and flame retardant properties of polymers than that of (Me₃N⁺-C₁₆)-modified clay, in the form of coating and membrane, based on the measurements of a series of electrochemical corrosion parameters, gas permeability analysis (GPA), dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and limiting oxygen index (LOI), respectively. Effect of material composition on the physical properties of as-prepared materials was also investigated.     

Properties of Luminescent Si Nanoparticles in Sol-Gel Matrices

In this wor e preparation and properties of silica sol-gels incorporating luminescent Si nanocrystallites extracted from porous Si are described for the first time. These sol-gel/Si nanocrystallite composite materials are characterized by BET isotherm measurements, photoluminescence spectroscopy, and infrared spectroscopy. To stabilize the photoluminescence (PL) of Si crystallites within the silica matrix, a fatty acid (capric (C₁₀), myristic (C₁₄) or arachidic acid (C₂₀)) is added as a passivation agent during the hydrolysis of tetraethoxysilane. The presence of the fatty acid is crucial to the long-term stability of the Si nanocrystallite luminescence, as the Si visible light emission remains essentially unchanged for more than a month when the fatty acid is present in the mixture but degrades quickly (within days) when absent. The thermal stability of the Si luminescence within the sol-gel is also reported. Fluorescence microscopy reveals that the light-emitting Si crystallites aggregate into micron-sized domains somewhat unevenly throughout the silica matrix. This distribution of Si crystallites can be improved by employing a surfactant, dioctyl sodium sulfosuccinate (DSS).     

Synthesis,crystal structure,and luminescence of a quaternary binuclear europium complex [Eu2(phth)2(Hphth)2(phen)2(H2O)4]

A quaternary binuclear europium complex [Eu₂(phth)₂(Hphth)₂(phen)₂(H₂O)₄] (H₂phth?=?phthalic acid, phen?=?1,10-phenanthroline) has been synthesized. The structure was determined by X-ray crystallography which reveals that it is binuclear with each europium nine-coordinate. Intermolecular hydrogen bonds link the complex units to form a 3D supermolecular network. Its properties have been studied by means of luminescence spectrum and thermal analysis. Fluorescence spectra show that the complex exhibits strong red emission.     

铌源和掺杂位置对LiFePO4/C电化学性能的影响

使用Nb2O5和Nb(OC6H5)5为铌源对LiFePO4/C中的锂位和铁位分别掺杂,采用碳热还原法合成掺杂Nb的磷酸铁锂系列材料。运用X射线衍射仪、扫描电镜、循环伏安、交流阻抗谱和恒电流充放电测试等对材料进行表征。结果表明:相比掺杂位置,铌源对材料的颗粒形貌和粒径分布影响更大,而颗粒大小对材料的电化学性能,尤其是大倍率性能的提高有重要作用;掺杂在Li位的Nb元素比在Fe位能更好的稳定晶体结构,从而有利于提高循环性能。     

Synthesis,DNA‐Binding and Photocleavage Studies of the Ruthenium(II) Complexes [Ru(phen)2(ppd)]2+ and [Ru(phen)(ppd)2]2+ (ppd=Pteridino[6,7‐f] [1,10]phenanthroline‐11,13(10H,12H)‐dione,phen=1,10‐Phenanthroline)

Two new complexes, [Ru(phen)₂(ppd)]²⁺ ( 1 ) and [Ru(phen)(ppd)₂]²⁺ ( 2 ) (ppd=pteridino[6,7‐f] [1,10]phenanthroline‐11,13(10H,12H)‐dione, phen=1,10‐phenanthroline) were synthesized and characterized by ES‐MS, ¹H‐NMR spectroscopy, and elemental analysis. The intercalative DNA‐binding properties of 1 and 2 were investigated by absorption‐spectroscopy titration, luminescence‐spectroscopy studies, thermal denaturation, and viscosity measurements. The theoretical aspects were further discussed by comparative studies of 1 and 2 by means of DFT calculations and molecular‐orbital theory. Photoactivated cleavage of pBR322 DNA by the two complexes were also studied, and 2 was found to be a much better photocleavage reagent than 1 . The mechanism studies revealed that singlet oxygen and the excited‐states redox potentials of the complex may play an important role in the DNA photocleavage.     

Time-Resolved Spectroscopy and Electronic Structure of Mono-and Dinuclear Pyridyl-Triazole/DPEPhos-Based Cu(I) Complexes

Chemical and spectroscopic characterization of the mononuclear photosensitizers [(DPEPhos)Cu(I)(MPyrT)]^0/+ ( CuL , CuLH ) and their dinuclear analogues ( Cu₂L’ , Cu₂L'H₂ ), backed by (TD)DFT and high-level GW-Bethe-Salpeter equation calculations, exemplifies the complex influence of charge, nuclearity and structural flexibility on UV-induced photophysical pathways. Ultrafast transient absorption and step-scan FTIR spectroscopy reveal flattening distortion in the triplet state of CuLH as controlled by charge, which also appears to have a large impact on the symmetry of the long-lived triplet states in Cu₂L’ and Cu₂L'H₂ . Time-resolved luminescence spectroscopy (solid state), supported by transient photodissociation spectroscopy (gas phase), confirm a lifetime of some tens of μs for the respective triplet states, as well as the energetics of thermally activated delayed luminescence, both being essential parameters for application of these materials based on earth-abundant copper in photocatalysis and luminescent devices.     

Synthesis of Flower-like NaY(MoO4)2 and Optical Property of NaY(MoO4)2:Eu3+

Flower-like NaY(MoO₄)₂ particles were synthesized through a microwave-assisted hydrother-mal process followed by a subsequent calcination process. The products were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron mi-croscopy. The possible formation mechanism of the flower-like NaY(MoO₄)₂ precursor was proposed. The NaY(MoO₄)₂:Eu³⁺ phosphors were also prepared and their luminescence properties showed the NaY(MoO₄)₂:Eu³⁺ materials with the emission peak at 612 nm had potential application as a red phosphor for white light-emitting diodes. Furthermore, the microwave-assisted hydrothermal process followed by a subsequent calcination process could be extended to prepare the other lanthanide molybdates with the flower-like morphology.     

Crystal Structure,Solution and Solid‐state Photoluminescence of a 2D Zinc(II) Supramolecular Architecture

A new 2D zinc(II) supramolecular complex [Zn(2,4‐D)(o‐phen)(H₂O)₂](NO₃) ( 1 ) (2,4‐D = 2,4‐dichlorophenoxyacetic acid, o‐phen = 1,10‐phenanthroline), was synthesized and characterized by single‐crystal X‐ray diffraction, elemental analyses, TG analysis, IR, and luminescence spectroscopy. For complex 1 , each Zn^II ion lies in a pentacoordinate distorted quadrilateral pyramidal configuration. The 8‐member‐ring hydrogen bonds clusters result in 1D ladder‐like supramolecular chains, which further stack up by face‐to‐face π–π stacking interactions into 2D supramolecular layers. The TG analysis shows that complex 1 has high thermal stability. The solution and solid‐state photoluminescence of 1 are reported.     

Luminescent Soft Material: Two New Europium‐Based Ionic Liquids

Two new Eu‐based ionic liquid systems, [C₄mim][DTSA] : [Eu(DTSA)₃] and 2[C₄mim] [DTSA] : [Eu(DTSA)₃] were synthesized at 120° under inert conditions from 1‐butyl‐1‐methylimidazolium ditoluenesulfonylamide ([C₄mim][DTSA]). The identity and purity of the synthesized compounds were confirmed by elemental analysis, IR, Raman, and ¹H‐NMR spectroscopy. As they solidify below 100° as glasses they qualify as ionic liquids. Fluorescence measurements show that the materials exhibit a strong red luminescence of high color purity. Therefore, they have the potential to be used for optical applications such as in emission displays.     

Lanthanide (Eu3+, Tb3+) Centered Mesoporous Hybrids with 1,3‐Diphenyl‐1,3‐Propanepione Covalently Linking SBA‐15 (SBA‐16) and Poly(methylacrylic acid)

1,3‐Diphenyl‐1,3‐propanepione (DBM)‐functionalized SBA‐15 and SBA‐16 mesoporous hybrid materials (DBM‐SBA‐15 and DBM‐SBA‐16) are synthesized by co‐condensation of modified 1,3‐diphenyl‐1,3‐propanepione (DBM‐Si) and tetraethoxysilane (TEOS) in the presence of Pluronic P123 and Pluronic F127 as a template, respectively. The as‐synthesized mesoporous hybrid material DBM‐SBA‐15 and DBM‐SBA‐16 are used as the first precursor, and the second precursor poly(methylacrylic acid) (PMAA) is synthesized through the addition polymerization reaction of the monomer methacrylic acid. These precursors then coordinate to lanthanide ions simultaneously, and the final mesoporous polymeric hybrid materials Ln(DBM‐SBA‐15)₃PMAA and Ln(DBM‐SBA‐16)₃PMAA (Ln=Eu, Tb) are obtained by a sol‐gel process. For comparison, binary lanthanide SBA‐15 and SBA‐16 mesoporous hybrid materials (denoted as Ln(DBM‐SBA‐15)₃ and Ln(DBM‐SBA‐16)₃) are also synthesized. The luminescence properties of these resulting materials are characterized in detail, and the results reveal that ternary lanthanide mesoporous polymeric hybrid materials present stronger luminescence intensities, longer lifetimes, and higher luminescence quantum efficiencies than the binary lanthanide mesoporous hybrid materials. This indicates that the introduction of the organic polymer chain is a benefit for the luminescence properties of the overall hybrid system. In addition, the SBA‐15 mesoporous hybrids show an overall increase in luminescence lifetime and quantum efficiency compared with SBA‐16 mesoporous hybrids, indicating that SBA‐15 is a better host material for the lanthanide complex than mesoporous silica SBA‐16.     

LED–LED portable oxygen gas sensor

A portable instrument for oxygen determination, based on the quenching of phosphorescent octaethylporphyrin by gaseous O₂, has been developed using the fluorimetric paired emitter–detector diode technique (FPEDD). The instrument configuration consists of two light-emitting diodes (LEDs) facing each other, with an interchangeable support containing a phosphorescent membrane in between, in which one of the LEDs is used as the light source (emitter LED) and the other, working in reverse bias mode, as the light detector. The feasibility of using a LED as a luminescence detector is studied. Its small size enables integration of the instrument into a portable measurement system. A systematic study of the system capabilities as a portable instrument was performed to optimize range, sensitivity, short term and long term stability, dynamic behaviour, effect of temperature and humidity, and temporal drift.     

Synthesis,spectral characterization,and luminescence properties of a cup-like ligand and its magnesium(II) complex

A new tripodal ligand, N,N′,N″-tri(salicylaldehyde)triaminotriethylamine (1) has been synthesized and characterized by elemental analysis, IR and UV spectroscopy, MS, and X-ray crystallography. X-ray diffraction analysis reveals that the three chains of the ligand form a cup-like structure. The ligand’s magnesium(II) complex has been synthesized and characterized by elemental analysis, conductivity, and IR and UV spectroscopy. The luminescence properties of the ligand and its magnesium(II) complex were investigated in DMF, CH₃OH, and CH₃CH₂OH solution and in the solid state at room temperature.     

Enhancement inhibition efficiency of PBTCA depending on the inclusion complex with hydroxypropyl-β-cyclodextrin

For the first time, hydroxypropyl-β-cyclodextrin (HP-β-CD) has been brought in to include 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTCA) in order to enhance inhibition efficiency of PBTCA, which leads a new approach to study oil–gas field corrosion inhibition in the process of acid treatment. Based on the host–guest inclusion reaction, the inclusion complex of PBTCA with HP-β-CD has been prepared in the laboratory. UV–Vis absorption spectrum was applied to study the inclusion behavior of PBTCA with HP-β-CD. The results revealed that PBTCA with HP-β-CD can form a 1:1 stoichiometry inclusion complex. The 1:1 inclusion complex synthesized by using lyophilization was further characterized by Fourier transform infrared spectroscopy. Besides, inhibition effect of the inclusion complex on the corrosion inhibition of Q235 carbon steel has been investigated in 0.1 M sulfuric acid (H₂SO₄) solution using potentiodynamic polarization, electrochemical impedance spectroscopy techniques and scanning electron microscopy (SEM). It was found that the presence of the inclusion complex better achieved the anti-corrosion property in aggressive medium than was the case with alone PBTCA and the highest inhibition efficiency of the inclusion complex over 90 % was obtained, which are suggestive of the active effect of the inclusion complex for improving inhibition efficiency of PBTCA. Meanwhile, the results obtained from SEM further showed that the inclusion complex acts as a more efficient corrosion inhibitor for Q235 carbon steel in H₂SO₄ medium.     

Structural and Optical Properties of Pure and Sulfur-Doped Silicate–Phosphate Glass

A series of silicate–phosphate glass materials from the SiO₂-P₂O₅-K₂O-MgO system (pure and doped with sulfur ions) were synthesized by melting raw material mixtures that contained activated carbon as a reducer. The bulk composition of glass was confirmed with X-ray fluorescence spectroscopy. The homogeneity of the glass was confirmed through elemental mapping at the microstructural level with scanning electron microscopy combined with an analysis of the microregions with energy-dispersive X-ray spectroscopy. The structural and optical properties of the glass were studied by using spectroscopic techniques. The infrared spectroscopy studies that were conducted showed that the addition of sulfur caused changes in the silicate–phosphate networks, as they became more polymerized, which was likely related to the accumulation of potassium near the sulfur ions. By using irradiation with an optical parametric oscillator (OPO) nanosecond laser system operating at the second harmonic wavelength, the glass samples emitted a wide spectrum of luminescence, peaking at about 700 nm when excited by UV light (210–280 nm). The influence of the glass composition and the laser-processing parameters on the emission characteristics is presented and discussed. This work also referred to the density, molar volume, and theoretical optical basicity of pure and sulfur-doped glass.     

Blue light-emitting and electron-transporting materials based on dialkyl-functionlized anthracene imidazophenanthrolines

Two novel blue light-emitting materials based on bis(tert-butyl)anthracenyl-imidazophenanthrolines (BAIPs) have been synthesized and extensively characterized. Both materials exhibited a non-aggregate feature with high fluorescent quantum efficiency and excellent thermal stability. They can serve both as emissive and electron-transporting materials used in electroluminescence (EL) device for blue emission with high luminescence and external quantum efficiency. This study demonstrates that they are potentially useful for a wide range of applications in EL technology.     

A d10 Metal Coordination Polymer Containing a Thiodiphthalic Ligand: Crystal Structure and Luminescent Property

A new two‐dimensional metal‐organic coordination polymer [Cd₂(2,3,2′,3′‐sdpa)(H₂O)₃] · 2H₂O ( 1 ) were hydro(solvo)thermally synthesized by the reaction of 2,3,2′,3′‐sulfonyldiphthalic acid (2,3,2′,3′‐H₄sdpa) with Cd(NO₃)₂ · 4H₂O and characterized by elemental analysis, thermogravimetry, IR and luminescence spectroscopy, and X‐ray diffraction. In complex 1 , two kinds of cadmium atoms are linked together by anionic sdpa^4– ligands to form a 2D metal‐organic network. The adjacent 2D layers further interact with each other through hydrogen bonds and π ··· π interactions to form a 3D supramolecular structure. The luminescence spectra and thermal properties of 1 were also investigated.     

Dinuclear cadmium (II) Schiff base complex: synthesis,crystal structure,spectroscopic characterization and application as a new precursor for preparation of nano-cadmium oxide

A novel cadmium (II) nano-complex, [Cd(EtOH)(HL)(NO₃)]₂ (1), (H₂L = 2-[(2-hydroxy-propylimino) methyl] phenol) was synthesized by solvothermal and sonochemical methods. The new nanostructure was characterized by scanning electron microscopy (SEM), X-ray powder diffraction, Fourier transform infrared spectroscopy and UV–Vis spectroscopy. Single crystalline of compound 1 was obtained using a branch tube method. The determination of the structure by single-crystal X-ray crystallography shows that the complex is a centrosymmetric dimer in which deprotonated phenolates bridge the two seven-coordinate metal atoms and link the two halves of the dimer. The luminescent properties of the complex 1 were examined and compared with the free ligand. The thermal stability of nano-complex 1 was analyzed by thermal gravimetric analysis. Furthermore, the effect of the initial substrates concentration on size and morphology of compound 1 nanostructure was investigated in sonochemical method. After the solid-state transformation of compound 1 at 650 °C in air, pure-phase nano-sized cadmium (II) oxide was produced. The morphology and size of the prepared CdO samples were further observed using TEM and SEM. Investigation of the optical properties of the produced cadmium oxide, using UV–Vis spectroscopy, confirmed its semiconducting properties by revealing optical band gap at 2.93 eV. A blue shift is observed in the band gap when compared with bulk sample which is due to the quantum size effect.     

发光的异核稀土配合物装饰氧化石墨烯片

采用非共价键的方法制备一种新型的高荧光性能氧化石墨烯-异核稀土杂化材料。利用苯甲酸(BA)和菲咯啉(Phen)与Sm~(3+)和Gd~(3+)配位,并作用在氧化石墨烯片(GOSs)表面,制备了一种异核稀土配合物。所制备的产物通过傅里叶变换红外光谱、X射线衍射、扫描电子显微镜、荧光光谱仪、荧光寿命和热重分析来表征。该杂化材料具有强发光强度、长的寿命和良好的热稳定性。此外,Gd~(3+)对材料具有很强的敏化作用,同时Gd~(3+)在提高发光强度方面起着重要作用。氧化石墨烯的存在不会淬灭杂化材料的荧光性能。此外,还研究了具有不同物质的量之比的Sm~(3+)和Gd~(3+)的荧光特性。