C-H vs C-C bond activation of acetonitrile and benzonitrile via oxidative addition: rhodium vs nickel and Cp* vs Tp' (Tp' = hydrotris(3,5-dimethylpyrazol-1-yl)borate, Cp* = η(5)-pentamethylcyclopentadienyl)

The photochemical reaction of (C(5)Me(5))Rh(PMe(3))H(2) (1) in neat acetonitrile leads to formation of the C-H activation product, (C(5)Me(5))Rh(PMe(3))(CH(2)CN)H (2). Thermolysis of this product in acetonitrile or benzene leads to thermal rearrangement to the C-C activation product, (C(5)Me(5))Rh(PMe(3))(CH(3))(CN) (4). Similar results were observed for the reaction of 1 with benzonitrile. The photolysis of 1 in neat benzonitrile results in C-H activation at the ortho, meta, and para positions. Thermolysis of the mixture in neat benzonitrile results in clean conversion to the C-C activation product, (C(5)Me(5))Rh(PMe(3))(C(6)H(5))(CN) (5). DFT calculations on the acetonitrile system show the barrier to C-H activation to be 4.3 kcal mol(-1) lower than the barrier to C-C activation. A high-energy intermediate was also located and found to connect the transition states leading to C-H and C-C activation. This intermediate has an agostic hydrogen interaction with the rhodium center. Reactions of acetonitrile and benzonitrile with the fragment [Tp'Rh(CNneopentyl)] show only C-H and no C-C activation. These reactions with rhodium are compared and contrasted to related reactions with [Ni(dippe)H](2), which show only C-CN bond cleavage.     

Intermolecular Ritter-type C-H amination of unactivated sp3 carbons

Intermolecular Ritter-type C-H amination of unactivated sp(3) carbons has been developed. This new reaction proceeds under mild conditions using readily available reagents and an inexpensive source of nitrogen (acetonitrile). A broad scope of substrates can be aminated with this method since many functional groups are tolerated. This reaction also allows for the direct, innate C-H amination of a variety of hydrocarbons such as cyclohexane without the need of prefunctionalization or installation of a directing group.     

C-C versus C-H activation and versus agostic C-C interaction controlled by electron density at the metal center

Based on the PCN ligand 2, a remarkable degree of control over C-C versus C-H bond activation and versus formation of an agostic C-C complex was demonstrated by choice of cationic [Rh(CO)(n)(C(2)H(4))(2-n)] (n=0, 1, 2) precursors. Whereas reaction of 2 with [Rh(C(2)H(4))(2)(solv)(n)]BF(4) results in exclusive C-C bond activation to yield product 5, reaction with the dicarbonyl precursor [Rh(CO)(2)(solv)(n)]BF(4) leads to formation of the C-H activated complex 9. The latter process is promoted by intramolecular deprotonation of the C-H bond by the hemilabile amine arm of the PCN ligand. The mixed monocarbonyl monoethylene Rh species [Rh(CO)(C(2)H(4))]BF(4) reacts with the PCN ligand 2 to give an agostic complex 7. The C-C activated complex 5 is easily converted to the C-H activated one (9) by reaction with CO; the reaction proceeds by a unique sequence of 1,2-metal-to-carbon methyl shift, agostic interaction, and C-H activation processes. Similarly, the C-C agostic complex 7 is converted to the same C-H activated product 9 by treatment with CO.     

C-H activations at iridium(I) square-planar complexes promoted by a fifth ligand

In the presence of ligands such as acetonitrile, ethylene, or propylene, the Ir(I) complex [Ir(1,2,5,6-eta-C8H12)(NCMe)(PMe3)]BF4 (1) transforms into the Ir(III) derivatives [Ir(1-kappa-4,5,6-eta-C8H12)(NCMe)(L)(PMe3)]BF4 (L = NCMe, 2; eta2-C2H4, 3; eta2-C3H6, 4), respectively, through a sequence of C-H oxidative addition and insertion elementary steps. The rate of this transformation depends on the nature of L and, in the case of NCMe, the pseudo-first-order rate constants display a dependence upon ligand concentration suggesting the formation of five-coordinate reaction intermediates. A similar reaction between 1 and vinyl acetate affords the Ir(III) complex [Ir(1-kappa-4,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (7) via the isolable five-coordinate Ir(I) compound [Ir(1,2,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (6). DFT (B3LYP) calculations in model complexes show that reactions initiated by acetonitrile or ethylene five-coordinate adducts involve C-H oxidative addition transition states of lower energy than that found in the absence of these ligands. Key species in these ligand-assisted transformations are the distorted (nonsquare-planar) intermediates preceding the intramolecular C-H oxidative addition step, which are generated after release of one cyclooctadiene double bond from the five-coordinate species. The feasibility of this mechanism is also investigated for complexes [IrCl(L)(PiPr3)2] (L = eta2-C2H4, 27; eta2-C3H6, 28). In the presence of NCMe, these complexes afford the C-H activation products [IrClH(CH=CHR)(NCMe)(PiPr3)2] (R = H, 29; Me, 30) via the common cyclometalated intermediate [IrClH{kappa-P,C-P(iPr)2CH(CH3)CH2}(NCMe)(PiPr3)] (31). The most effective C-H oxidative addition mechanism seems to involve three-coordinate intermediates generated by photochemical release of the alkene ligand. However, in the absence of light, the reaction rates display dependences upon NCMe concentration again indicating the intermediacy of five-coordinate acetonitrile adducts.     

Electrochemical and ESR studies of the methane C-H bond activation in the presence of radical cations of pyrazine-di-N-oxide and its substituted derivatives

Activation of the methane C-H bond in the presence of electrochemically generated radical cations of pyrazine-di-N-oxide and also of 2,5-dimethyl- and 2,3,5,6-tetramethyl-pyrazine-di-N-oxides is studied by methods of cyclic voltammetry (CVA), quantum chemical simulations, and ESR electrolysis. The studies are carried out on glassy carbon (GC) and Pt electrodes in 0.1 M LiClO₄ solutions in acetonitrile. ESR spectra of radical cations of aromatic di-N-oxides in the absence and in the presence of methane are recorded. The changes in the shape CVA curves and the intensity of ESR signals of di-N-oxide radical cations observed in the presence of methane point to the activation of the methane C-H bond followed by its oxidation. The reaction of pyrazinedi-N-oxide at the methane C-H bond is simulated by quantum chemical methods. The obtained results are explained within the framework of the mechanism of overall two-electron oxidation of methane within its complex with an aromatic di-N-oxide radical cation.     

Binding of an acetonitrile molecule inside the ethereal cavity of a hexaarylbenzene-based receptor via a synergy of C-H...O/C-H...pi interactions

A pair of hexaarylbenzene-based receptors, which contain a circular, as well as a partially-broken, ethereal fence around the central benzene ring, bind acetonitrile molecules via a synergy of C-H...O and C-H...pi interactions, as probed by X-ray crystallography.     

Autocatalysis for C-H bond activation by ruthenium(II) complexes in catalytic arylation of functional arenes

Kinetic data for the C-H bond activation of 2-phenylpyridine by Ru(II)(carboxylate)(2)(p-cymene) I (acetate) and I' (pivalate) are available for the first time. They reveal an irreversible autocatalytic process catalyzed by the coproduct HOAc or HOPiv (acetonitrile, 27 °C). The overall reaction is indeed accelerated by the carboxylic acid coproduct and water. It is retarded by a base, in agreement with an autocatalytic process induced by HOAc or HOPiv that favors the dissociation of one carboxylate ligand from I and I' and consequently the ensuing complexation of 2-phenylpyridine (2-PhPy). The C-H bond activation initially delivers Ru(O(2)CR)(o-C(6)H(4)-Py)(p-cymene) A or A', containing one carboxylate ligand (OAc or OPiv, respectively). The overall reaction is accelerated by added acetates. Consequently, C-H bond activation (faster for acetate I than for pivalate I') proceeds via an intermolecular deprotonation of the C-H bond of the ligated 2-PhPy by the acetate or pivalate anion released from I or I', respectively. The 18e complexes A and A' easily dissociate, by displacement of the carboxylate by the solvent (also favored by the carboxylic acid), to give the same cationic complex B(+) {[Ru(o-C(6)H(4)-Py)(p-cymene)(MeCN)](+)}. Complex B(+) is reactive toward oxidative addition of phenyl iodide, leading to the diphenylated 2-pyridylbenzene.     

Enantioselective gold-catalyzed functionalization of unreactive sp3 C-H bonds through a redox-neutral domino reaction

Selectivity is golden: The first asymmetric redox-neutral domino reaction catalyzed by gold that results in the direct functionalization of unreactive sp(3) C-H bonds has been reported. This method consists of a heterocyclization/1,5-hydride transfer/cyclization reaction and provides synthetically valuable azepines with high enantioselectivities and in high yields (Tf = triflate; see scheme).     

Ultrafast study of p-biphenylyldiazomethane and p-biphenylylcarbene

p-Biphenylyldiazomethane was excited by femtosecond pulses of UV light in acetonitrile, in cyclohexane, and in methanol. Ultrafast photolysis produces a singlet excited state of p-biphenylyldiazomethane with lambdamax = 490 nm, and lifetimes of less than 300 fs in acetonitrile, in cyclohexane, and in methanol. The decay of the excited state is accompanied by the growth of transient absorption with lambdamax = 360 nm. The carrier of this transient absorption is attributed to singlet p-biphenylylcarbene, a result that is consistent with the predictions of TD-DFT calculations. The singlet carbene lifetimes are 200 and 77 ps in acetonitrile and cyclohexane, respectively, and are controlled by intersystem crossing to the lower energy triplet state. The transient absorption does not decay to baseline in acetonitrile, because of the formation of nitrile ylide. The equilibrium mixture of singlet and triplet p-biphenylylcarbene reacts with acetonitrile to form a nitrile ylide (lambdamax = 370 nm), and with cyclohexane by C-H insertion 1-20 ns after the laser pulse. The singlet carbene lifetime is only 7.9 ps in methanol, owing to a rapid reaction with the solvent. Reaction with the solvent gives rise, in part, to a p-biphenylylbenzyl cation (lambdamax = 450 nm, tau = 6.3 ps) in methanol.     

Copper-catalyzed aerobic oxidative C-H functionalizations: trends and mechanistic insights

The selective oxidation of C-H bonds and the use of O(2) as a stoichiometric oxidant represent two prominent challenges in organic chemistry. Copper(II) is a versatile oxidant, capable of promoting a wide range of oxidative coupling reactions initiated by single-electron transfer (SET) from electron-rich organic molecules. Many of these reactions can be rendered catalytic in Cu by employing molecular oxygen as a stoichiometric oxidant to regenerate the active copper(II) catalyst. Meanwhile, numerous other recently reported Cu-catalyzed C-H oxidation reactions feature substrates that are electron-deficient or appear unlikely to undergo single-electron transfer to copper(II). In some of these cases, evidence has been obtained for the involvement of organocopper(III) intermediates in the reaction mechanism. Organometallic C-H oxidation reactions of this type represent important new opportunities for the field of Cu-catalyzed aerobic oxidations.     

Palladium-catalyzed formation of highly substituted naphthalenes from arene and alkyne hydrocarbons

Several highly substituted naphthalenes 3 have been synthesized in a one-pot reaction by treatment of arenes 1 with alkynes 2 in the presence of palladium acetate and silver acetate. In this Pd-catalyzed protocol, an arene provides a benzo source for the construction of a naphthalene core through twofold aryl C-H bond activation. Reaction of triphenylphosphine with diphenylethyne (2 a) under the catalysis of Pd(IV) complexes produced 1,2,3,4-tetraphenylnaphthalene (3 ba) in 62 % yield. Here, triphenylphosphine undergoes one aryl C-P bond cleavage and one aryl C-H bond activation to serve as a benzo moiety. Crystal structures of cycloadducts 3 ea, 3 ga, and 3 ac have been analyzed. The twisted naphthalenes arise not only from the overcrowded substituents but also from the contribution of the CH(3)-pi interaction.     

In situ investigation of acetonitrile adsorption on Al2O3-coated CaF2 using sum-frequency spectroscopy

Sum-frequency spectroscopy (SFS) has been used to probe the interface between a model catalyst support (Al(2)O(3)-coated CaF(2)) and liquid consisting of neat acetonitrile and acetonitrile in ethanol. Vibrational features associated with both CN stretching ( approximately 2242 and 2281) and C-H stretching ( approximately 2942 and 2989) are observed for adsorbed nitrile. The peak positions are only slightly shifted from the bulk values, indicating weak adsorption to the model support. In the case of the neat liquid, the C-H stretching vibrations have also been probed using various polarization combinations of the sum frequency, visible and infrared beams in order to determine the orientation of the nitrile with respect to the surface. The average molecular angle calculated ( approximately 39 degrees ) shows the off-normal alignment of acetonitrile on the surface of the model support. Finally, an attempt has been made to obtain qualitative information about the adsorption isotherm of acetonitrile on Al(2)O(3)/CaF(2). The lack of curvature in the isotherm indicates the lack of affinity for the surface by acetonitrile in ethanol.     

Experimental and theoretical examination of C-CN and C-H bond activations of acetonitrile using zerovalent nickel

Experimental and density functional theory show that the reaction of acetonitrile with a zerovalent nickel bis(dialkylphosphino)ethane fragment (alkyl = methyl, isopropyl) proceeds via initial exothermic formation of an eta(2)-nitrile complex. Three well-defined transition states have been found on the potential energy surface between the eta(2)-nitrile complex and the activation products. The lowest energy transition state is an eta(3)-acetonitrile complex, which connects the eta(2)-nitrile to a higher energy eta(3)-acetonitrile intermediate with an agostic C-H bond, while the other two lead to cleavage of either the C-H or the C-CN bonds. Gas-phase calculations show C-CN bond activation to be endothermic, which contradicts the observation of thermal C-CN activation in THF. Therefore, the effect of solvent was taken into consideration by using the polarizable continuum model (PCM), whereupon the activation of the C-CN bond was found to be exothermic. Furthermore the C-CN bond activation was found to be favored exclusively over C-H bond activation due to the strong thermodynamic driving force and slightly lower kinetic barrier.     

Evidence for a one-electron mechanistic regime in dirhodium-catalyzed intermolecular C-H amination

Swift and energy efficient conversion of chemical feedstocks to pharmaceuticals and agrochemicals requires the development of new methods to add nitrogen functionality to unfunctionalized organic substrates. Dirhodium-catalyzed insertion of nitrene species into C-H bonds is a promising new method, the main drawback of which is the currently limited understanding of the catalytic mechanism. Herein, cyclic voltammetry and controlled potential electrolysis measurements have enabled us to solve many of the mechanistic mysteries of intermolecular C-H amination catalyzed by [Rh(2)(esp)(2)] (esp=α,α,α',α'-tetramethyl-1,3-benzenedipropanoate). The primary result is that, in addition to a simple nitrene-transfer mechanism that dominates the early stages of the reaction, another mechanism is available that relies on sequential proton-coupled electron transfer steps. Whereas the nitrene-transfer mechanism requires the use of expensive, atom-inefficient oxidants, we show that simple one-electron oxidants such as Ce(4+) may be used to achieve catalytic C-H amination via the one-electron mechanistic regime.     

Carboxylation of arene C-H bonds with CO2: a DFT-based approach to catalyst design

A prototypical catalytic cycle for the direct carboxylation of unactivated arene C-H bonds with CO(2) based on ruthenium(II) pincer complexes as catalysts is proposed and investigated by density functional theory (DFT) methods. The energetic span model is used to predict the turnover frequency (TOF) of various potential catalysts, evaluating their efficiency for this reaction. In addition to modifications of the catalyst structure, we also investigated the effect of the substrate, the solvent, and the influence of a base on the thermodynamics and kinetics of the reaction. Turnover frequencies in the range of 10(5)-10(7) h(-1) are predicted for the best systems. Alternative reaction pathways that might prevent the reaction are also investigated. In all cases, either the respective intermediates are found to be unstable or activation barriers are found to be very high, thereby indicating that these alternative pathways will not interfere with the proposed catalytic cycle. As a result, several ruthenium pincer complexes are suggested as very promising candidates for experimental investigation as catalysts for the carboxylation of arene C-H bonds with CO(2).     

Unexpected selectivities in C-H activations of toluene and p-xylene at cationic platinum(II) diimine complexes. New mechanistic insight into product-determining factors.

The C-H activation of toluene and p-xylene at cationic Pt(II) diimine complexes (N-N)Pt(CH(3))(H(2)O)(+)BF(4)(-) (N-N = Ar-N=CMe-CMe=N-Ar; 1(BF(4)(-)), N(f)-N(f), Ar = 3,5-(CF(3))(2)C(6)H(3)); 2(BF(4)(-)), N'-N', Ar = 2,6-(CH(3))(2)C(6)H(3)) has been investigated. The reactions were performed at ambient temperature in 2,2,2-trifluoroethanol (TFE), and after complete conversion of the starting material to mixtures of Pt-aryl/Pt-benzyl complexes and methane, acetonitrile was added to trap the products as more stable acetonitrile adducts. In the reactions with toluene, the relative amounts of products resulting from aromatic C-H activation were found to decrease in the order (N-N)Pt(m-tolyl)(NCMe)(+) > (N-N)Pt(p-tolyl)(NCMe)(+) > (N-N)Pt(o-tolyl)(NCMe)(+) for both 1 and 2. Unlike the reaction at 1, significant amounts of the benzylic activation product (N'-N')Pt(benzyl)(NCMe)(+) were concurrently formed in the C-H activation of toluene at 2. The C-H activation of p-xylene revealed an even more remarkable difference between 1 and 2. Here, the product ratios of (N-N)Pt(xylyl)(NCMe)(+) and (N-N)Pt(p-methylbenzyl)(NCMe)(+) were found to be 90:10 and 7:93 for reactions at 1 and 2, respectively. The elimination of toluene from (N(f)-N(f))Pt(Tol)(2) species (3a-c; a, Tol = o-tolyl; b, Tol = m-tolyl; c, Tol = p-tolyl) after protonolysis with 1 equiv of HBF(4) was investigated. Most notably, protonation in neat TFE followed by addition of acetonitrile gave a 77:23 mixture of (N(f)-N(f))Pt(m-tolyl)(NCMe)(+) (4b) and (N(f)-N(f))Pt(p-tolyl)(NCMe)(+) (4c) from all three isomeric bis(tolyl) complexes 3a-c. The presence of acetonitrile during the protonation reactions resulted in considerably less isomerization. This behavior is explained by an associative mechanism for the product-determining displacement of toluene by the solvent. For the C-H activation reactions, our findings suggest the existence of a dynamic equilibrium between the isomeric intermediates (N-N)Pt(aryl)(CH(4))(+) (aryl = tolyl/benzyl from 1; xylyl/p-methylbenzyl from 2). The observed selectivities might then be explained by steric and electronic effects in the pentacoordinate transition-state structures for the solvent-induced associative elimination of methane from these intermediates.     

Study of the interaction in clusters formed by phenol and CH3X (X=CN,F,Cl) molecules

The characteristics of the interaction between phenol and acetonitrile, methyl fluoride and methyl chloride were studied. The most stable structures for clusters containing one or two CH3X molecules and one phenol moiety were located by means of ab initio and density functional theory calculations. Phenol-acetonitrile dimer presents two almost equally stable structures; one of them is a typical linearly hydrogen bonded minimum, whereas in the other one, a C-H...pi contact is established accompanied by a distorted O-H...N hydrogen bond. Although the latter minimum presents the larger interaction energy, deformation effects favor the formation of the linear hydrogen bonded one. In complexes with methyl fluoride and methyl chloride, this arrangement is the most stable structure and no linear hydrogen bonded structures were located. Our best estimates for the interaction energies amount to -27.8, -21.6, and -19.7 kJ/mol for clusters of phenol with acetonitrile, methyl fluoride, and methyl chloride, respectively. The main contribution to the stabilization of these clusters is of electrostatic nature, although in structures where a C-H...pi contact is present, the dispersion contribution is also significant. In clusters formed by phenol and two CH3X units, the most stable arrangement corresponds to a head to tail disposal with O-H...X, C-H...X, and C-H...pi contacts forming a cycle. Only for this type of arrangement, three body effects are non-negligible even though they constitute a minor effect. The results also indicate that interactions with methyl fluoride and methyl chloride are of similar intensity, although weaker than with acetonitrile. Significant frequency shifts are predicted for the O-H stretching, which increase when increasing the number of CH3X molecules.     

Palladium(II)-catalyzed one-pot syntheses of 9-(pyridin-2-yl)-9H-carbazoles through a tandem C-H activation/C-X (X=C or N) formation process

A new one-pot synthesis of 9-(pyridin-2-yl)-9H-carbazoles through the simultaneous C-H activation and palladium(II)-catalyzed cross-coupling of N-phenylpyridin-2-amines with potassium aryltrifluoroborates is presented. Silver acetate and 1,4-dioxane proved to be the best oxidant and solvent, respectively. The product yields fluctuated from modest to excellent and the reaction showed sufficient functional group tolerance. p-Benzoquinone served as an important ligand for the transmetalation and reductive elimination steps in the catalytic process. The kinetic isotope effects (k(H)/k(D)) for the first and second C-H activation/C-C or C-N formation steps were measured as 2.14 and 1.18, respectively. Finally, a rational catalytic mechanism is presented based on all experimental evidence.     

Mechanistic Study of Palladium-Catalyzed Oxidative C-H/C-H Coupling of Polyfluoroarenes with Simple Arenes

Pd-catalyzed oxidative C-H/C-H coupling reaction is an emerging type of C-H acti-vation reaction, which attracts great interests because both reaction partners do not re-quire pre-functionalization. In the present study, we employed DFT methods to investigatethe mechanism of Pd(OAc)₂-catalyzed oxidative C-H/C-H coupling of pentafluoroben-zene with benzene. Four possible pathways were examined in the C-H activation part: path A benzene-pentafluorobenzene mechanism (C-H activation of benzene occurs before the C-H activation of pentafluorobenzene), path B pentafluorobenzene-benzene mechanism (C-H activation of benzene occurs after the C-H activation of pentafluorobenzene), path C benzene-pentafluorophenylsilver mechanism (C-H activation of benzene and subsequenttransmetalation with pentafluorophenyl silver complex), path D pentafluorophenylsilver-benzene mechanism (transmetalation with pentafluorophenyl silver complex and subsequent C-H activation of benzene). Based on the calculations, the sequences of two C-H activation steps are found to be different in the oxidative couplings of same substrates (i.e. pentaflu-orobenzene and benzene) in different catalytic systems, where the additive Ag salts played a determinant role. In the absence of Ag salts, the energetically favored pathway is path B (i.e. the C-H activation of pentafluorobenzene takes place before the C-H cleavage of benzene). In contrast, with the aid of Ag salts, the coordination of pentafluorophenylsilver to Pd center could occur easily with a subsequent C-H activation of benzene in the second step, and the second step significantly raises the whole reaction barrier. Alternatively, in thepresence of Ag salts, the kinetically preferred mechanism is path C (i.e. the C-H activation of benzene takes place in the first step followed by transmetalation with pentafluorophenyl-silver complex), which is similar to path A. The calculations are consistent with the H/D exchange experiment and kinetic isotope effects. Thus the present study not only offers a deeper understanding of oxidative C-H/C-H coupling reaction, but also provides helpful insights to further development of more efficient and selective oxidative C-H/C-H coupling reactions.     

Metal- and chemical-oxidant-free C-H/C-H cross-coupling of aromatic compounds: the use of radical-cation pools

Pool and couple: A method for oxidative C-H/C-H cross-coupling has been developed using "radical-cation pools". Aromatic compounds react with aryl radical cations, which are generated and accumulated by low-temperature electrolysis (see scheme). This method avoids both the nonselective oxidation of substrates and oxidation of products and effects the C-H/C-H cross-coupling of aromatic compounds without metal complexes and chemical oxidants.