SYNTHESIS OF POLYSILOXANE—SUPPORTED THIACROWN ETHER PLATINUM COMPLEXES AND THEIR CATALYTIC BEHAVIOR IN THE HYDROSILYLATION OF OLEFINS WITH TRIETHOXYSILANE

The chemistry of the thiacrowns,especially,of the polymer-supported thiacrowns,has not been developed to the extend of the crowns or azacrowns.Very few functionalized thiacrown compunds have been prepared.No paper concerning the polymer-supported thiacrowns platinum complexes and their catalytic behavior has been published yet.In this paper,the synthesis of fumed silica-supported polyundecyloxymethyl-1,4-dithia-7,10,13-trioxa cyclopentadecane siloxane and silica-supported poly-undecyloxymethyl-1,4-dithia-7,10,13,16-tetraoxacyclooctadecane siloxane,as well as their platinum complexes,and the catalytic activity of the complexes for the hydrosilylation of olefins with triethoxysilane are reported.     

SYNTHESIS OF POLY（3,4-AZOPYRIDYLENE） AND OXYGEN-BINDING AFFINITY OF ITS COMPLEX WITH COBALTPORPHYRIN

Synthesis and characteristics of poly(3,4-azopyridylene) (PAP), conductivity and oxygen-binding affinity of its complex with meso-α,α,α,α-tetrakis(o-pivalamidophenyl) porphyrinatocobalt(Ⅱ) (CoP) were studied. PAP was prepared by oxidative polymerization of 3,4-diaminopyridine (DAP) in DMF solution using CuCl/pyridine as the catalyst. IR and NMR results showed that the peak of amido group in DAP was converted to the azo group in PAP and a π conjugated polymer was synthesized. The average molecular weight of PAP was determined to be 5.0 × 103. The PAP-CoP complex was prepared by complexing the pyridyl group of PAP with the fifth coordination site of CoP in DMF solution. In comparison with the CoP complex with a non-π conjugated polymer, the PAP-CoP complex shows good electroconductivity of 5.8 × 10-6 Scm-1. The PAP-CoP complex displays a reversible change in the UV-Visible absorption spectrum from the deoxy form to the oxy or oxygen-binding one with an isosbestic point, in response to the partial oxygen pressure of the atmosphere. The oxygen-response behavior was monitored at the absorbance ascribed to the oxy form at 548 nm to give the oxygen-binding affinity.The oxygen-binding equilibrium curves of PAP-CoP complex obey a Langmuir isotherm. DMF has great effects on the oxygen-binding properties of the PAP-CoP complex. The oxygen-binding affinity of PAP-CoP complex in the solid state is higher than that in DMF solution. With decreasing temperature, the oxygen-binding affinity of the PAP-CoP complex increases.     

NETWORK CROWN ETHER POLYMERS WITH CENTRIC FUNCTIONAL GROUPS.Ⅱ.SYNTHESIS OF NETROWK CROWN ETHER POLYMER WITH PENDANT SULFIDE SIDE CHAIN AND ITS PLATINUM COMPLEX

Network crown ether polymer with pendant sulfide side chain in the network structure units has been synthesized via ring-opening copolymerization of β-ethylthioethyl glycidyl ether and diethylene glycol bisglycidyl ether.A kind of active catalyst suitable for this reaction was suggested.The title polymer was found to be a good ligand for platinous chloride,and the platinous complex could catalyze the hydrosilylation of ole fins with triethoxysilane efficiently.     

SYNTHESIS, CHARACTERIZATION AND ANTIMICROBIAL PROPERTIES OF 4-[（4-HYDROXYBENZYLIDENE） AMINO] PHENOL AND ITS POLYMER

The oxidative polycondensation reaction conditions of 4-[(4-hydroxybenzylidene)amino]phenol(4-HBAP)were studied with H_2O_2,air oxygen and NaOCl in an aqueous alkaline medium between 50 and 90℃.The structures of the obtained monomer and polymer were confirmed by FT-IR,UV-Vis,~1H-and ~(13)C-NMR and elemental analysis.The characterization was made by TG-DTA,size exclusion chromatography(SEC)and solubility tests.At the optimum reaction conditions,the yield of poly[4-(4-hydroxybenzylidene amino)phenol](P-4-HBAP)was found to be 48.3%(for H_2O_2 oxidant),80.5%(for air O_2 oxidant)and 86.4%(for NaOCl oxidant).According to the SEC analysis,the number-average molecular weight(M_n),weight-average molecular weight(M_w)and polydispersity index(PDI)values of P-4-HBAP was found to be 8950,10970 g mol~(-1) and 1.225,respectively,using H_2O_2;and 11610,15190 g mol~(-1) and 1.308 respectively, using air O_2 and 7900,9610 g mol~(-1) and 1.216,respectively,using NaOCl.According to TG-DTA analyses,P-4-HBAP was more stable than 4-HBAP against thermal decomposition.The weight loss of P-4-HBAP was found to be 49.27% at 1000℃. The highest occupied molecular orbital(HOMO)and the lowest unoccupied molecular orbital(LUMO)values calculated from electrochemical measurement.Electrochemical energy gaps(E′_g)of 4-HBAP and P-4-HBAP were found to be-5.46, -5.28;-2.26,-2.67;3.20 and 2.61 eV,respectively.According to UV-Vis measurements,optical band gap(E_g)of 4-HBAP and P-4-HBAP were found to be 3.34 and 3.01 eV,respectively.Also,antimicrobial activities of 4-HBAP and P-4-HBAP were examined against selected some bacteria.The electrical conductivity of the polymer was measured after doping with iodine.     

SYNTHESIS OF SOLUBLE POLY（3,4-DIHYDROXY-o-TOLYLENE）： REDOX POLYMER

Conventional chloromethylation, paraformaldehyde/hydrogen chloride in acetic acid medium, was applied to 1,2- dimethoxybenzene. Chloroform-soluble poly（3,4-dimethoxy-o-tolylene） was obtained with an intrinsic viscosity of 0.034 dL g^-1. The polymer was evaluated as a condensation redox polymer precursor formed by a Friedel-Crafts reaction. Cleavage of the methoxy groups present in this polymer resulted in poly（3,4-dihydroxy-o-tolylene） which manifested a great air-oxidation resistance. The redox property of the latter polymer was found to be 1017 mV by potentiometric titration with 0.05 N ceric ammonium nitrate at 25℃. This midpotential was compared to that of catechol, a monomeric analogue, under the same titration conditions.     

THE SYNTHESIS AND CHARACTERIZATION OF SOME POROUS CROSS—LINKED POLY （VINYLACETOPHENONE） RESINS AND THEIR CAPACITIES IN ADSORBING GYPENOSIDES

In search of a suitable adsorbent used for the enrichment and separation of natural saponins from an aqueous solution,a series of porous cross-linked poly (vinylaceto-phenone) resins I-Ⅸ were synthesized via the Friedel-Crafts acylation of styrene-divinyl-benzene copolymer beads.Their carbonyl contents were characterized by infrared spectra and elemental analysis.Their physical properties such as bulk densities,skeleton densities,and specific surface areas were also determined.The tests for the resins adsorption of gypenosides showed that only those resins with high carbonyl contents and large specific surface areas could favorably adsorb gypenosides from an aqueous solution with much higher capacities.     

SYNTHESIS AND CHARACTERIZATION OF COPOLYMER OF 2,5-BIS[（4-METHOXYPHENYL）OXYCARBONYL]STYRENE AND STYRENE WITH HIGH MOLECULAR WEIGHT

The random copolymers of styrene and 2,5-bis[(4-methoxyphenyloxycarbonyl)styrene] (MPCS) with different copolymerization ratio were synthesized by conventional free radical polymerization. The copolymer having high molecular weight was experimentally elucidated using a combination of proton nuclear magnetic resonance spectroscopy and gel permeation chromatography. The liquid crystalline behavior of the copolymer was studied using differential scanning calorimetry, X-ray diffractometry and polarized optical microscopy. It was found that the liquid crystalline behavior was dependent on the content of styrene. Experimental results show that the copolymer could turn into a liquid crystalline phase at about 180℃ when the content of styrene was less than 20%. The mechanical properties of the copolymer were also studied. Preliminary results indicate that the tensile strength decreases while the tensile modulus increases as the content of MPCS is increased.     

SYNTHESIS OF NEW AROMATIC POLY（AMIDE IMIDE）S FROM UNSYMMETRICAL EXTENDED DIAMINE CONTAINING A PHTHALAZINONE MOIETY

The direct polymerization of an unsymmetrical kink non-coplanar heterocyclic diamine (1) with various aromatic bis(trimellitimide)s (2a-e) using triphenyl phosphite and pyridine as condensing agents could generate a series of new aromatic poly(amide imide)s (3a-e) containing the kink non-coplanar phthalazinone heterocyclic units in the polymer main chains with inherent viscosities of 0.58-0.66 dL/g. The polymers are readily soluble in a variety of solvents such as N,N-dimethylformamide, N,N-dimethylacetamide, dimethyl sulfoxide, N-methyl-2-pyrrolidinone, pyridine and m-cresol and can be cast to form flexible and tough films. The glass transition temperatures of polymers (T8) are in the range of 301-327℃, and the temperatures for 5% weight loss in nitrogen are in the range of 498-521℃.     

SYNTHESIS OF POLYBINAPHTHYLS INCORPORATING CHIRAL （R）-1,1′-BI-2,2′-NAPHTHOL ENTITIES WITH p-DIVINYLBENZENE BY Pd-CATALYZED HECK REACTION

Polymer (Ⅰ) and polymer (Ⅱ) were obtained by the polymerization of (R)-6,6′-dibromo-2,2′-binaphtho-20-crown-6 (M-l) and (R)-6,6′-dibromo-2,2′-di(methoxyethoxymethyloxy)-1,1′-binaphthyl (M-2) with p-divinylbenzene under Pdcatalyzed Heck reaction. The UV, fluorescence and CD spectra of polymer (Ⅰ) and (Ⅱ) are similar due to the same linkers present in their polymer chain. Polymers (Ⅰ) and (Ⅱ) can emit strong blue fluorescence and are expected to have potential applications in polarized blue-light emitting sensors. The chiral conjugated polymers (Ⅰ) and (Ⅱ) exhibit a strong Cotton effect in their circular dichroism (CD) spectra, indicating a high rigidity of polymer backbone.