Atom Exchange Versus Reconstruction: (GexAs4−x)x− (x=2, 3) as Building Blocks for the Supertetrahedral Zintl Cluster [Au6(Ge3As)(Ge2As2)3]3−

The Zintl anion (Ge₂As₂)²⁻ represents an isostructural and isoelectronic binary counterpart of yellow arsenic, yet without being studied with the same intensity so far. Upon introducing [(PPh₃)AuMe] into the 1,2-diaminoethane (en) solution of (Ge₂As₂)²⁻, the heterometallic cluster anion [Au₆(Ge₃As)(Ge₂As₂)₃]³⁻ is obtained as its salt [K(crypt-222)]₃[Au₆(Ge₃As)(Ge₂As₂)₃]⋅en⋅2 tol ( 1 ). The anion represents a rare example of a superpolyhedral Zintl cluster, and it comprises the largest number of Au atoms relative to main group (semi)metal atoms in such clusters. The overall supertetrahedral structure is based on a (non-bonding) octahedron of six Au atoms that is face-capped by four (Ge_xAs_4−x)^x− (x=2, 3) units. The Au atoms bind to four main group atoms in a rectangular manner, and this way hold the four units together to form this unprecedented architecture. The presence of one (Ge₃As)³⁻ unit besides three (Ge₂As₂)²⁻ units as a consequence of an exchange reaction in solution was verified by detailed quantum chemical (DFT) calculations, which ruled out all other compositions besides [Au₆(Ge₃As)(Ge₂As₂)₃]³⁻. Reactions of the heavier homologues (Tt₂Pn₂)²⁻ (Tt=Sn, Pb; Pn=Sb, Bi) did not yield clusters corresponding to that in 1 , but dimers of ternary nine-vertex clusters, {[AuTt₅Pn₃]₂}⁴⁻ (in 2 – 4 ; Tt/Pn=Sn/Sb, Sn/Bi, Pb/Sb), since the underlying pseudo-tetrahedral units comprising heavier atoms do not tend to undergo the said exchange reactions as readily as (Ge₂As₂)²⁻, according to the DFT calculations.     

Electroconductance of single-crystal Li2 + x Fe 2 − 2x 2+ Fe x 3+ (MoO4)3 (x = 0.22)

Electrophysical properties of single-crystal Li_{2 + x} Fe _{2 ? 2x} ²⁺ Fe _x ³⁺ (MoO₄)₃ (x = 0.22) are studied at 25–400°C. It is found that the conduction is of electronic nature and the conductivity equals 5 × 10^-2 S/cm at 300°C. The activation energy for the electron transport is 0.23 eV. The conductance in molybdate Li_2.22Fe _1.56 ²⁺ Fe _0.22 ³⁺ (MoO₄)₃ is markedly anisotropic.     

Rubidium-cationic conductivity of Rb2−2x Ga2−x A x O4 (A = P, V, Nb, Ta) solid electrolytes

Solid solutions based on rubidium monogallate RbGaO₂ with a general formula Rb_2?2x Ga_2?x A _x O₄ (A = P, V, Nb, and Ta) are synthesized. Their crystal structure and temperature and concentration dependences of conductivity are studied. The highest rubidium-cationic conductivity is (1.8–3.9) × 10^?3 S cm^?1 at 400°C and (1.4–2.1) × 10^?2 S cm^?1 at 700°C. These results are compared with the data for rubidium monogallate doped with four-charged cations and solid solutions based on RbAlO₂.     

Sol-gel synthesis and structure of MZr2(AsO4)3 arsenates and MZr2(AsO4) x (PO4)3 − x arsenate phosphates (M = K,Rb, Cs)

MZr₂(AsO₄)₃ arsenates and MZr₂(AsO₄) _x (PO₄)_{3 ? x} arsenate phosphates (M = K, Rb, Cs) have been obtained by sol-gel synthesis followed by heat treatment and have been characterized by X-ray diffraction, electron probe microanalysis, and IR spectroscopy. Continuous series of substitutional solid solutions form in the MZr₂(AsO₄) _x (PO₄)_{3 ? x} systems (0 ≤ x ≤ 3). The solid solutions have a kosnarite structure (KZr₂(PO₄)₃, space group \(R\bar 3c\) ). The crystal structures of MZr₂(AsO₄)₃ and MZr₂(AsO₄)_1.5(PO₄)_1.5 have been refined by full-profile analysis. The structural frameworks of these phases are built from ZrO₆ octahedra and AsO₄ tetrahedra or (As,P)O₄ tetrahedra statistically populated by arsenic and phosphorus atoms. The alkali metal atoms occupy extraframework sites. The effect of the crystal chemical properties of alkali metals on the formation of the structures of MZr₂(AsO₄)₃ arsenates (M = Li-Cs) and MZr₂(AsO₄) _x (PO₄)_{3 ? x} solid solutions is discussed.     

Framework polymers based on octahedral chalcocyanide cluster [Re6Q8(CN)6]4−/3− anions (Q = Se, Te) and [Nd(Bipy)n]3+ Complexes (n = 1, 2)

Interaction of salts of the cluster anions {Re [Re₆Q₈(CN)₆]^4?/3? (Q = Se, Te) with Nd salts in the presence of 2,2′-bipyridyl (Bipy) ligand brings about new coordination polymers: Pr ₄ ⁿ N[{Nd(Bipy)(H₂O)₄} {Re₆Se₈(CN)₆}] · 2H₂O (I) (space group C2/c, a = 18.2918(16) Å, b = 14.9972(13) Å, c = 37.513(3) Å, β = 102.046(4)°, V = 10064.2(15) ų, Z = 8), [{Nd(Bipy)₂(H₂O)} {Re₆Se₈(CN)₆}] (II) (space group C2/c, a = 15.8668(3) Å, b = 13.5403(3) Å, c = 20.5189(4) Å, β = 110.135(1)°, V = 4138.89(15) Å₃, Z = 4), and [{Nd(Bipy)(EtOH)(H₂O)₄}{Re₆Te₈(CN)₆}] · EtOH (III) (space group $P\bar 1$ , a = 9.4733(6) Å, b = 12.5326(8) Å, c = 17.2374(11) Å, α = 96.561(2)°, β = 90.310(2)°, γ = 94.876(2)°, V = 4138.89(15) Å₃, Z = 4). The compounds synthesized are characterized by single-crystal X-ray diffraction and IR methods. Compounds I and III have layered (2D) structures, compound II is a framework (3D) polymer.     

Hydrogen content in proton-conducting perovskites CaZr1 − x Sc x O3 − x /2 (x = 0.0–0.2)

The hydrogen content in CaZr_{1 ? x} Sc _x O_{3 ? x/2} (x = 0.00–0.20) and BaZr_0.9Y_0.1O_3-α (for comparison) was studied by powder nuclear microanalysis. The samples were saturated with heavy water (D₂O) vapors at 350 and 400°C in air. The chemical expansion of the CaZr_0.95Sc_0.05O_3-α and BaZr_0.95Y_0.05O_3-α samples at 700°C was measured at different water vapor pressures. A model was suggested to explain the lowered hydrogen content in oxides based on CaZrO₃.     

Multivariate analysis of melting points for homologous series C x H2x − 1NO (x = 3−6)

A multivariate analysis of the empirical structure data for isomeric homologues using principal-component analysis has been carried out, and the correlation with experimental melting points has been shown. Based on the data on the CSD structure, we discuss the impact of molecular H-aggregation.     

[M(dap)3]2(Sb2Se5)·xH2O(M=Ni,x=2;M=Zn,x=0)的溶剂热合成及晶体结构

利用溶剂热法合成了2种新的有机杂化锑硒化合物[Ni(dap)3]2(Sb2Se5)].2H2O(1)和[Zn(dap)3]2(Sb2Se5)](2)(dap=1,2-丙二胺),单晶X射线衍射分析结果表明,1属于三方晶系,P3121空间群,晶胞参数为a=10.7574(14),b=10.7574(14),c=31.672(4),γ=120.00°,z=4。2属于单斜晶系,P21空间群,晶胞参数为a=10.772(2),b=16.391(3),c=11.704(2),β=100.912(4)°,z=4。在2种化合物中,Ni2 与Zn2 离子分别与3个dap配体螯合形成畸变八面体几何构型,其中dap配体的N原子是无序的,而二聚[Sb2Se5]2-阴离子是由2个SbSe3三角锥共用1个Se原子连接而成。     

Phosphates M 0.5(1 + x) 2+ Cr x Ti2 − x (PO4)3: Synthesis, structure, and catalytic properties

Complex phosphates of titanium, chromium, and metals(2+) of the general formula M_{0.5(1 + x} )Cr _x Ti_{2 ? x} (PO₄)₃ (M = Mg, Ca, Mn, Ni, Sr, Ba, and Pb) were synthesized. Their phase formation was studied by means of X-ray powder diffraction, electron probe microanalysis, differential thermal analysis, and IR spectroscopy. Individual phases and solid solutions crystallizing in kosnarite and langbeinite structure types were identified; their crystallographic parameters were calculated. The catalytic properties of phosphates Ca_{0.5(1 + x} )Cr _x Ti_{2 ? x} (PO₄)₃ in methanol conversion were studied.     

Trifluoromethylation of [AuF3(SIMes)]: Preparation and Characterization of [Au(CF3)xF3−x(SIMes)] (x=1–3) Complexes

Trifluoromethylation of [AuF₃(SIMes)] with the Ruppert–Prakash reagent TMSCF₃ in the presence of CsF yields the product series [Au(CF₃)_xF_3−x(SIMes)] (x=1–3). The degree of trifluoromethylation is solvent dependent and the ratio of the species can be controlled by varying the stoichiometry of the reaction, as evidenced from the ¹⁹F NMR spectra of the corresponding reaction mixtures. The molecular structures in the solid state of trans-[Au(CF₃)F₂(SIMes)] and [Au(CF₃)₃(SIMes)] are presented, together with a selective route for the synthesis of the latter complex. Correlation of the calculated SIMes affinity with the carbene carbon chemical shift in the ¹³C NMR spectrum reveals that trans-[Au(CF₃)F₂(SIMes)] and [Au(CF₃)₃(SIMes)] nicely follow the trend in Lewis acidities of related organo gold(III) complexes. Furthermore, a new correlation between the Au−C_carbene bond length of the molecular structure in the solid state and the chemical shift of the carbene carbon in the ¹³C NMR spectrum is presented.     

Effect of hydration on conductivity of Ba4La x Ca2 − x Nb2O11 + 0.5x (x = 0.5, 1, 1.5, 2) phases

Substitution of Ca by La in initial cubic double perovskite Ba₄(Ca₂Nb₂)O₁₁[VO]₁ allowed obtaining phases with a similar structure with a lower content of structural oxygen vacancies, Ba₄(La _x Ca_{2 ? x} Nb₂)O_{11 + 0.5x} [VO]_{1 ? 0.5x} (x = 0.5, 1, 1.5, 2). The impedance technique was used to measure the temperature dependences of conductivity in the atmosphere of dry and humid air. Transport numbers determined using the EMF method in an oxygen-air and water steam concentration cells point to the predominantly hole nature of conductivity in the high-temperature region (T > 600°C) and to predominance of proton conductivity in the low-temperature region. Activation energies of hole and proton conductivity were calculated. Thermogravimetric measurements were carried out under heating from 25 to 1000°C with simultaneous mass-spectrometric determination of evolved H₂O and CO₂. The properties of the studied Ba₄(La _x Ca_{2 ? x} Nb₂)O_{11 + 0.5x} (x = 0.5, 1, 1.5, 2) phases were compared with the earlier studied Ba_{4 ? x} La _x (Ca₂Nb₂)O_{11 + 0.5x} phases with similar lanthanum content.     

Homoleptic diphosphacyclobutadiene complexes [M(η(4)-P2C2R2)2]x- (M = Fe, Co; x = 0, 1)

The preparation and comprehensive characterization of a series of homoleptic sandwich complexes containing diphosphacyclobutadiene ligands are reported. Compounds [K([18]crown-6)(thf)(2)][Fe(η(4)-P(2)C(2)tBu(2))(2)] (K1), [K([18]crown-6)(thf)(2)][Co(η(4)-P(2)C(2)tBu(2))(2)] (K2), and [K([18]crown-6)(thf)(2)][Co(η(4)-P(2)C(2)Ad(2))(2)] (K3, Ad = adamantyl) were obtained from reactions of [K([18]crown-6)(thf)(2)][M(η(4)-C(14)H(10))(2)] (M = Fe, Co) with tBuC[triple bond]P (1, 2), or with AdC[triple bond]P (3). Neutral sandwiches [M(η(4)-P(2)C(2)tBu(2))(2)] (4: M = Fe 5: M = Co) were obtained by oxidizing 1 and 2 with [Cp(2)Fe]PF(6). Cyclic voltammetry and spectro-electrochemistry indicate that the two [M(η(4)-P(2)C(2)tBu(2))(2)](-)/[M(η(4)-P(2)C(2)tBu(2))(2)] moieties can be reversibly interconverted by one electron oxidation and reduction, respectively. Complexes 1-5 were characterized by multinuclear NMR, EPR (1 and 5), UV/Vis, and M?ssbauer spectroscopies (1 and 4), mass spectrometry (4 and 5), and microanalysis (1-3). The molecular structures of 1-5 were determined by using X-ray crystallography. Essentially D(2d)-symmetric structures were found for all five complexes, which show the two 1,3-diphosphacyclobutadiene rings in a staggered orientation. Density functional theory calculations revealed the importance of covalent metal-ligand π bonding in 1-5. Possible oxidation state assignments for the metal ions are discussed.     

Lead-free Perovskite Materials (NH4)3Sb2IxBr9−x

A family of perovskite light absorbers (NH₄)₃Sb₂I_xBr_9−x (0≤x≤9) was prepared. These materials show good solubility in ethanol, a low-cost, hypotoxic, and environmentally friendly solvent. The light absorption of (NH₄)₃Sb₂I_xBr_9−x films can be tuned by adjusting I and Br content. The absorption onset for (NH₄)₃Sb₂I_xBr_9−x films changes from 558 nm to 453 nm as x changes from 9 to 0. (NH₄)₃Sb₂I₉ single crystals were prepared, exhibiting a hole mobility of 4.8 cm² V⁻¹ s⁻¹ and an electron mobility of 12.3 cm² V⁻¹ s⁻¹. (NH₄)₃Sb₂I₉ solar cells gave an open-circuit voltage of 1.03 V and a power conversion efficiency of 0.51 %.     

Synthesis and electrical properties of variable-composition phases Rb1 − x A1 − x R1 + x (MoO4)3 (0 ≤ x ≤ 0.2; A = Mg, Mn, Co, Ni; R = Sc, Yb, Lu)

Subsolidus region of the ternary systems Rb₂MoO₄-AMoO₄-R₂(MoO₄)₃, in which variable-composition phases Rb_{1 ? x} A_{1 ? x} R_{1 + x} (MoO₄)₃ crystallizing in the monoclinic system (space group C2) are formed, was studied. Their crystallographic parameters were calculated; temperature dependences of the electrical conductivity, dielectric constant, and dielectric loss tangent were analized.     

Thermal properties and structure of (As2S3)100−x(Sb4S4)x glassy system

Thermal properties and structure of bulk glasses of (As₂S₃)_1?x(Sb₄S₄)_x system (x varies from 0 to 60 mol%) were studied by differential scanning calorimetry and Raman spectroscopy. It was found that with increasing Sb content the glasses can be sorted out to the three groups. The structure of glasses with x ≤ 10 is build-up mainly from AsS_3/2 pyramidal units and the well-known crystallization resistance of As₂S₃ can explain the reluctance of these undercooled liquids against crystallization. In glasses with a higher content of antimony, i.e., 10 < x ≤ 30 mol%, the vibration characteristics of As₄S₄ clusters appear. Undercooled melts of these glasses crystallize forming both β-As₄S₄ and high-temperature phases of Sb₂S₃. Structure of glasses with the highest antimony content (x > 30 mol%) is based on SbS_3/2 structural units significantly lowering stability of their undercooled melts from which only Sb₂S₃ crystallizes.     

Hydrates [Na2(H2O)x](2-thiobarbiturate)2 (x = 3, 4, 5): crystal structure,spectroscopic and thermal properties

The hydrates [Na₂(H₂O)₃(Htba)₂] (1) and [Na₂(H₂O)₄(Htba)₂] (2), where H₂tba is 2-thiobarbituric acid, were obtained under different thermal conditions from aqueous solutions and were structurally characterized. The molecular and supramolecular structures were compared to the known structure of [Na₂(H₂O)₅(Htba)₂] (3). In polymeric 1–3, the Htba^? ions are linked to Na⁺ through O and S forming octahedra. The decrease of the number of coordination water molecules led to an increase of the total number of bridge ligands (μ₂-H₂O, Htba^?) and a change of the Htba^? coordination. These factors induced higher distortion of the octahedra. It was assumed that hydrates, with a different number of coordinated water molecules, are more probable when the central metal has weaker bonds with O water molecules and with other ligands. The net topologies of 1–3 were compared. Thermal decomposition and IR spectra were analyzed for 1 and 2.     

Electroconduction of Solid Solutions Na3 – 2x M x PO4(M = Cd, Pb)

In the sodium-orthophosphate-based solid solutions in Na_{3 – 2x} M _x PO₄ systems (M = Cd, Pb), the electroconduction is maximum near the upper concentration boundaries of the single-phase regions: x 0.4 for M = Cd and x 0.25 for M = Pb. The conductivity values at 300°C are 6.25 × 10^–3 and 2.5 × 10^–3 S/cm, respectively. The conduction of synthesized solid electrolytes has a co-cation nature. Their electric characteristics, inferior to those of the Na₃PO₄-based solid solutions obtained via heterovalent substitutions of another type, may be a manifestation of an effect similar to the polyalkali effect.     

Ca3(P x V1 − x O4)2: Eu3+ nanophosphor synthesis, controlled microstructure, and photoluminescence

In this paper, Eu³⁺-doped Ca₃(P _x V_{1 ? x} O₄)₂ (x = 0.1, 0.4, 0.7) nanophosphors were synthesized in the presence of sodium dodecyl benzene sulfonate (SDBS). The products present interesting and regular morphologies under the mild conditions. For Ca₃(P _x V_{1 ? x} O₄)₂: Eu³⁺, they have the similar phase and their morphologies vary with the content ratio of P to V. Furthermore, the luminescence behavior of Eu³⁺ has been investigated in this one kinds of matrices. In Ca₃(P _x V_{1 ? x} O₄)₂: Eu³⁺, the ⁵ D ₀-⁷ F ₂ emissions of Eu³⁺ were the strongest, indicating that the Eu³⁺ site is without inversion symmetry, the host compositions with different molar ratio of P to V have; great influence on the luminescent performance. Among those products, The value of I ₆₁₅/I ₅₉₃ for Eu³⁺ in Ca₃(P_0.7V_0.3O₄)₂ host lattice is the biggest. The substitution of PO ₄ ^3? for VO ₄ ^3? increase the ratio of surface Eu cations as well as the value of I ₆₁₅/I ₅₉₃ of Eu³⁺.     

Synthesis of Calcium Phosphates by PO(OH)x(OBut)3−x and CaO2C2H4

In this work, an alkoxide solution route to synthesize Ca phosphates was developed. For the precursors, a CaO₂C₂H₄ solution was prepared by dissolving Ca metal powder into ethylene glycol, and a PO(OH)_x(OBut)_3–x solution was prepared by dissolving P₂O₅ inton -butanol under reflux conditions. In order to obtain a mixed solution of the two precursors, acetic acid was used as an additive. The experimental results show that (1) -2CaO · P₂O₅, -3CaO · P₂O₅, and hydroxyapatite can be easily synthesized by converting the corresponding mixed solutions to powder products in a hot plate, and calcining the as prepared products at 1100°C; (2) acetic acid behaves as a good agent for controlling the reactions between the two precursors by modifying the CaO₂C₂H₄ species in solution and decreasing the reactivity of the PO(OH)_x(OBut)_3–x species.     

Bioresorbable carbonated hydroxyapatite Ca10−xNax(PO4)6−x(CO3)x(OH)2 powders for bioactive materials preparation

The purpose of this work was to find and investigate a correlation between the carbonate ion content in crystalline lattice and defect structure, and solubility of the materials; finally, to prepare the materials under study for in vitro tests. Various techniques, such as XRD, FTIR, TEM, FESEM/EDX, TG/DTA, AES (ICP), wet chemical analysis, Ca-ionometry, microvolumetric analysis of evolved CO₂, BET adsorption, were applied to determine the efficiency of carbonate substitution, and to quantify the elemental composition, as well as to characterize the structure of the carbonated hydroxyapatite and the site(s) of carbonate substitution,. It was shown that AB-type substitution prevails over other types with the carbonate content increase. According to in vitro tests, the bioactivity of the samples is correlated with the carbonate content in carbonate-doped hydroxyapatite due to accumulation of defects in carbonated hydroxyapatite nanocrystals.