新型水溶性共轭嵌段含糖聚合物的合成与表征

以两端溴化的聚9,9-二己基芴作为大分子引发剂, 6-O-甲基丙烯酰基-1,2∶3,4-二-O-异亚丙基-D-吡喃型半乳糖(6-O-Methacryloyl-1,2∶3,4-di-O-isopropylidene-D-galactopyranose, MaIpGa)为单体, 氯化亚铜/1,1,4,7,10,10-六甲基三乙基四胺为催化剂, 通过原子转移自由基聚合(ATRP), 合成了一种新型的具有良好光学性能的三嵌段共聚物聚甲基丙烯酸羟基保护半乳糖酯-聚芴-聚甲基丙烯酸羟基保护半乳糖酯(PMaIpGa-PF-PMaIpGa). 在酸性条件下进一步水解, 得到水溶性的聚甲基丙烯酸半乳糖酯-聚芴-聚甲基丙烯酸半乳糖酯(PMaGa-PF-PMaGa)三嵌段聚合物, 其结构和分子量(分布)通过核磁共振、红外光谱和凝胶渗透色谱(GPC)确证, 并研究了其紫外-可见和荧光光谱特性.     

芳基喹啉取代螺二芴化合物的合成

2-溴联苯格式试剂与9-芴酮生成的叔醇中间体在酸性条件下环合形成螺二芴,再经Friedel-Crafts酰基化得到2-乙酰基螺二芴(3)和2,2-二乙酰基螺二芴(4);3或4与2-氨基二苯甲酮衍生物在酸催化下经过Friedlander缩合,制备了一系列具有荧光性的2-(4-取代苯基)喹啉-9,9'-螺二芴或2,2'-二(4-取代苯基)喹啉-9,9'-螺二芴,其结构经UV-vis,荧光光谱,1H NMR和元素分析表征.     

溶剂手性转移法制备超支化共轭聚合物手性荧光纳米粒子

通过Suzuki缩合反应制备了一系列新型不同超支化结构的9,9-二辛基芴-联二噻吩交替共聚物(HF8T2s).以手性溶剂(R)-(+)-/(S)-(-)-柠檬烯为手性源,在三氯甲烷/((R)-(+)-或(S)-(-)-)柠檬烯/甲醇混合溶剂体系里,通过溶剂手性转移技术,制备了分别以三苯胺、三苯基苯和螺二芴为支化单元的超支化聚(9,9-二辛基芴-联二噻吩)手性荧光纳米粒子.在混合溶剂中形成的荧光纳米粒子的手性来源于手性溶剂(R)-(+)-/(S)-(-)-柠檬烯.以三苯胺为支化单元时,支化单元的含量为4.56%时聚合物的手性信号最强,支化单元的含量为6.76%时聚合物的手性信号消失.以三苯基苯和螺二芴为支化单元时,支化单元的含量分别为1.85%(三苯基苯)和1.78%(螺二芴)时聚合物的手性信号最强,支化单元的含量较高(三苯基苯:4.68%和6.56%,螺二芴:4.54%和6.54%)时聚合物的手性信号消失.以超支化聚合物HF8T2-TRA2(三苯胺为支化单元,支化单元含量为1.90%)为例,考察了超支化聚合物重复单元浓度、弱溶剂的种类、弱溶剂与手性溶剂比例和(R)-(+)-柠檬烯与(S)-(-)-柠檬烯比例对超支化聚合物圆二色谱光谱强度的影响.当超支化聚合物重复单元浓度为5.0×10-5mol/L,使用甲醇为弱溶剂,三氯甲烷/((R)-(+)-或(S)-(-)-)柠檬烯/甲醇之间的配比为0.3∶1.8∶0.9(V/V/V)时,超支化聚合物圆二色谱光谱强度最强.在三氯甲烷/((R)-(+)-或(S)-(-)-)柠檬烯/甲醇(0.3∶1.8∶0.9(V/V/V))混合溶剂中,聚合物重复单元浓度为5.0×10-5mol/L,超支化聚合物在350～550 nm有较强的紫外吸收,在450～700 nm有较强的荧光发射,组装成的荧光纳米粒子尺寸约为500～2000 nm.     

一种受阻胺封端的聚芴蓝光材料的合成及其稳定性研究

以五甲基哌啶醇、对溴苯酰氯为原料合成了一种受阻胺抗氧稳定剂,通过Suzuki反应将其封端到聚(9,9-二辛基)芴上.通过核磁共振谱、凝胶渗透色谱对合成材料的分子结构进行了表征;并利用荧光发射光谱和退火方法,对其光谱热稳定性进行了细致研究.实验结果表明,当在聚芴分子链上引入受阻胺五甲基哌啶醇后,其荧光发射光谱的稳定性显著提高,绿光区发射现象明显减弱.     

两种新型咔唑衍生物的合成及其光电性能

以咔唑、三苯基氯硅烷及2-溴芴为原料,经甲基化、硼酸化、Ullmann偶联、Suzuki偶联等反应合成了两种新型咔唑衍生物--3,6-二(9,9-二甲基-9H-2-芴基)-9-苯基-9H-咔唑(1a)和3,6-二[(4-三苯硅基)苯基]-9-苯基-9H-咔唑(1b),其结构经1H NMR和元素分析表征.用UV-Vis,荧光光谱和循环伏安曲线研究了1a和1b的光电性能.     

基于卤键的选择性吸附层层组装多层膜

以超支化聚乙烯亚胺为构筑基元、以卤键为推动力制备了可以选择性吸附带有负电荷小分子的层层组装多层膜. 为了将超支化聚乙烯亚胺引入多层膜体系中, 我们首先制备了接枝有卤键给体分子-碘全氟苯的超支化聚乙烯亚胺(BPEI-I). 然后将BPEI-I和含有卤键受体的聚(4-乙烯吡啶)(PVPy)在四氢呋喃和三氯甲烷的混合溶剂中组装成膜, 并用紫外可见光谱、AFM和XPS对膜的组装过程、形貌、厚度和推动力进行了表征. 制备得到的BPEI-I和PVPy多层膜可以吸附含有负电荷的2-蒽甲酸钠小分子, 而对有类似结构但带有正电荷的溴化-N-(2-蒽甲基)吡啶盐却没有吸附作用. 这种选择性吸附能力主要得益于包覆在多层膜中的超支化聚乙烯亚胺基元的正电荷空腔和由卤键构筑的弱极性微环境. 本文的研究为制备选择性吸附薄膜提供了一种新的思路, 在传感、富集分离和微接触印刷等领域都有潜在应用价值.     

4-[2-(9,9-二辛基-9H-芴-2-)乙烯基]苯胺的合成及其光学性质

以2-溴芴、溴代正辛烷和对硝基苯乙烯为主要原料,通过烷基化反应、Heck反应和还原反应合成了新化合物4-[2-(9,9-二辛基-9H-芴-2-]乙烯基)苯胺(5),其结构经1H NMR和IR表征。应用UV-Vis和荧光光谱初步探讨了5的光学性质。     

9位芳香基取代超支化聚芴的合成与表征

以2,7-二溴芴酮为起始原料,在芴的9位引入芳香取代基代替传统的烷基取代基,增加9位的稳定性,并用AB+AB2的方法,用新单体合成了不同支化度的超支化聚合物,新合成的超支化聚合物具有良好的热稳定性和发光稳定性.聚合物的热分解温度都在400℃以上;聚合物的薄膜在空气中于200℃加热2 h后没有出现绿光发射带,发光稳定性和烷基聚芴相比得到明显的提高.DSC结果显示,线性聚合物在170℃时有玻璃化转变,超支化聚合物在300℃以内没有明显的相转变,保持一种稳定的无定形态,更有利于提高材料的发光效率.     

新型蒽衍生物——9-[3,5-二(4’-N,N-二苯基)胺基]苯基蒽的合成及其光学性能

以9-溴蒽,1,3,5-三溴苯,对溴碘苯和二苯胺为原料,经Ullmann反应,Suzuki偶联和硼酸化等反应合成了一种新型的蒽衍生物———9-[3,5-二(4’-N,N-二苯基)胺基]苯基蒽(5),其结构经1H NMR和元素分析表征。研究了5的紫外吸收光谱和荧光光谱。结果表明,5在256 nm,350 nm和388 nm处有较强吸收;在激发波长为320 nm激发下,5的发射波长在414 nm和497 nm。     

新型超支化聚芳烃的合成与性能研究

3,6-二乙炔基-9-(三苯胺基)-咔唑、4,4′-二乙炔基-4″-(咔唑基)-三苯胺双炔和1-辛炔单炔在CpCo(CO)2-hν催化的条件下合成了新型超支化聚芳烃.所得的聚合物都溶于普通溶剂(甲苯、THF、氯仿、二氯甲烷等).在光激发的条件下,聚合物在428 nm左右发射蓝光,其荧光量子效率达到62%.所有超支化聚合物都表现出优异的热稳定性,它们的起始分解温度高达484℃.     

SYNTHESIS AND PROPERTIES OF POLY(AROMATIC DIACETYLENE)S CONTAINING FLUORENE

Novel fluorene-based poly(aromatic diacetylene)s have been synthesized by CuCl-catalyzed oxidative coupling of aromatic diynes.New aromatic diynes 2,7-diethynyl-9,9-bis(triphenylamine)fluorene(M_1)is synthesized by multistep reactions.The structures and properties of the polymers are characterized and evaluated by IR,NMR,TGA,UV, photoluminescence(PL),and cyclic voltammetry analyses.These polymers possess good thermal stability.All the polymers are completely soluble in coammon solvents such as toluene,TH...     

Synthesis and properties of σ-π conjugated porous polymers obtained with Mizoroki–Heck reaction of tetra vinyl cyclic siloxane with dibromo fluorene

σ-π Conjugated porous polymers were synthesized by the Mizoroki–Heck reaction of cyclic siloxane with vinyl groups, 1,3,5,7-tetravinyltetramethylcyclotetrasiloxane (TVMCTS), and 2,7-dibromo-9,9-dialkylfluorene (RFl) compounds, using a Pd catalyst in N,N-dimethylformamide (DMF) at 100°C. The reactions of TVMCTS in combination with 2,7-dibromo-9,9-dihexylfluorene (HFl), 2,7-dibromo-9,9-dioctylfluorene (OFl), and 2,7-dibromo-9,9-ethylhexylfluorene (EHFl) yielded porous polymers whose morphologies were induced by phase separation during the network formation. The reactions in combination with binary RFl systems, TVMCTS-HFl/OFl, and HFl/EHFl systems, also yielded porous polymers. Scanning electron microscope images showed porous structures, which were composed by connected globules and/or isolated-deformed holes. The long and branching structure of the alkyl side chains in RFl decreased Young's modulus of porous polymers in compression test. The porous polymers showed emission derived from σ-π conjugated fluorene units on photo excitation. An increase in monomer concentration in the reaction induced red shifts of the emission bands of the porous polymer due to π-stacking of the fluorene units. The porous polymers showed relatively high fluorescence quantum yields of about 0.2–0.3. Quantum yield of the porous polymers with HFl decreased with increasing monomer concentration in the reaction systems.     

Synthesis of novel π‐conjugating polymers based on dibenzothiophene

Novel π‐conjugating polymers based on dibenzothiophene were synthesized with a novel dibenzothiophene derivative, 2,8‐bis(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)dibenzothiophene ( 1 ), prepared from dibenzothiophene. The Suzuki coupling polycondensation of 1 with 2,7‐dibromo‐9,9‐dioctylfluorene, 3,6‐dibromo‐9‐octylcarbazole, or 1,4‐dibromo‐2,5‐dioctyloxybenzene afforded the corresponding dibenzothiophene‐based polymers. The measurements of photoluminescence indicated that all these polymers exhibited blue emission in solution. The copolymer containing dibenzothiophene and 9,9‐dioctylfluorene units exhibited higher thermal stability than poly[(9,9‐dioctylfluorene‐2,7‐diyl)], although the quantum yield of copolymer was lower than that of poly[(9,9‐dioctylfluorene‐2,7‐diyl)]. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1521–1526, 2003     

Synthesis and photo- and electroluminescent properties of copolyfluorenes with nile red fragments in side chains

New copolyfluorenes containing units of 4,7-dibromo-2,1,3-benzothiadiazole (green luminophore) and 3,6- or 2,7-dibromocarbazole derivatives with side-chain fragments of green (4-pyrrolidinyl-1,8-naphthalimide) and red (Nile red) luminophores and additional carbazole or diphenyloxadiazole groups are synthesized via the Suzuki copolycondensation reaction. The structure of the polymers is modified via insertion of triphenylamine, aryloxadiazole, and quinoxaline units in the backbone of copolyfluorenes and via introduction of triphenylamine, fluorene, and benzene terminal groups. The molecular-weight characteristics of the polycondensation products and the specific features of the transfer of polyfluorene emission energy to the indicated luminophores in solutions and films are studied. Coating the emissive copolyfluorene layer with electron-conducting and hole-blocking layers of poly[9,9-bis(6′-diethoxyphosphorylhexyl)fluorene] makes it possible to increase the brightness of light-emitting diodes (to 2380–3900 cd/m²) and their current and luminance efficiencies.     

Design,synthesis, photophysical,and electrochemical properties of DCM‐based conjugated polymers for light‐emitting devices

A series of conjugated hyperbranched polymers, hyperbranched copolymers, and linear polymers containing 2‐pyran‐4‐ylidenemalononitrile (acceptor) and triphenylamine/fluorene (donor) units were synthesized and characterized by FTIR, ¹H NMR, thermogravimetric analyses, differential scanning calorimetry, gel permeation chromatography, UV–visible, photoluminescence, and cyclic voltammetry measurements. All the polymers show red‐light emission in the range of 566–656 nm both in solution and in solid state. The quantum efficiency of the polymers was in the range of 56–82%. Among the six polymers synthesized, only polymers containing fluorene units show T_g and polymers based on triphenylamine not exhibit T_g. The band gap of these polymers were found to be reasonably low; hyperbranched copolymer containing fluorene unit shows lowest band gap of 2.18 eV due to the stabilization of LUMO energy level by the electron withdrawing ? CN groups. The thermal and solubility behavior of the polymers were found to be good. All the EL spectra of the devices (indium‐tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/polymer/2,9‐dimethyl‐4,7‐diphenyl‐1,10‐phenanthroline/tris(8‐hydroxyquinoline)aluminum)/LiF/Al) show red‐light emission, and the device fabricated with P3 and P4 shows maximum luminance and luminous efficiency of 4104 cd m^?2 and 0.55 cd Å^?1 and 3696 cd m^?2 and 0.47 cd Å^?1, respectively, indicates that they had the best carrier balance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Anodic behaviour of mono- and bisdithiafulvenyl-9,9′-spirobifluorene: insertion of vinylogous TTF into the spirobifluorenyle framework

New three-dimensional copolymers containing 9,9′-spirobifluorenyl-ethylene units were prepared by anodic oxidation of 9,9′-spirobifluorenes 2-mono- or 2,7′-disubstituted by a dithiafulvenyl unit. The synthesis, physicochemical properties and electrochemistry of both monomers and derived oligomers and polymers are reported.     

超支化聚芴的合成与性能研究

采用2,7-二(4-羟基苯基)-9,9-二烷基芴(A2)与四对甲基苯磺酸季戊四醇酯(B4)通过A2+B4型缩聚反应合成了一系列共轭型超支化聚合物.利用紫外和荧光谱对聚合物予以表征,结果表明,此类聚合物均可发出稳定、纯正的蓝光.DSC和TGA显示,4种聚合物在150℃以下没有明显的相态变化,300℃以内无明显的热分解现象,这表明此类聚合物具有良好的热稳定性,有利于材料的发光效率及发光稳定性.     

Triazatruxene-containing hyperbranched polymers: Microwave-assisted synthesis and optoelectronic properties

Hyperbranched polymer structures represent a class of high-functionality building blocks with excellent three-dimensional topology for the construction of highly substituted conjugated polymers. In this contribution, an efficient microwave synthesis protocol toward the synthesis of conjugated hyperbranched polymers is presented. A novel series of soluble hyperbranched polyfluorenes (PTF1-PTF3) incorporating triazatruxene moiety as the branch units with various branching degrees have thus been successfully constructed with good yields and high molecular weight via a facile “A2+B2+C3” approach. The structures of the hyperbranched polymers were confirmed by NMR and GPC. Their thermal, optical, and electrochemical properties of the hyperbranched polymers were also investigated. The results showed that introduction of triazatruxene units into the hyperbranched structure endowed the polymer with good thermal stability and highly amorphous properties. Photophysical investigation of PTFx revealed strong blue emission in both solution and solid states. Hyperbranched polymers with higher degree of branching and proper content of linear fluorene units exhibited better photophysical properties in terms of narrow emission spectra and relatively high quantum efficiency as well as improved thermal spectral stability. The triazatruxene branching unit also played a role in raising the HOMO energy levels relative to those of polyfluorenes that would help to improve the charge injection and transport properties. The incorporation of triazatruxene unit into hyperbranched polymers has thus explored an effective avenue for constructing optoelectronic polymers with improved functional characteristics.     

Liquid crystalline polyfluorenes for blue polarized electroluminescence

A series of 9,9‐dialkyl‐poly(fluorene‐2,7‐diyl)s containing linear and branched alkyl substituents with a M_n of up to 200000 g/mol has been synthesized. Moreover, some of the polymers were end capped with a suitable hole transport functionality, such as a triphenylamine derivative, to improve their charge transport properties and to control the molecular weight. The thermal alignment of these novel polymers on a rubbed polyimide layer led to highly anisotropic film formation with dichroic ratios (absorption parallel and perpendicular to the rubbing direction) of up to 26 in absorption and 21 in emission.