Dibromomethane as one-carbon source in organic synthesis: total synthesis of (±)-canadensolide

A diastereoselective total synthesis of (±)-canadensolide is described. The key step is to introduce the α-methylene group by the ozonolysis of mono-substituted alkenes followed by reaction with a preheated mixture of CH₂Br₂-Et₂NH.     

Synthesis of α-aryl nitriles through B(C6F5)3-catalyzed direct cyanation of α-aryl alcohols and thiols

Various α-aryl nitriles have been prepared in excellent yield from the corresponding α-aryl alcohols employing 3 mol % of B(C₆F₅)₃ (1) as Lewis acid catalyst and (CH₃)₃SiCN (TMSCN) as cyanide source. Cyano transfer from TMSCN to alcohol proceeds within short reaction time at rt. α-Aryl thiols also produce corresponding nitriles in good to excellent yield at reflux condition.     

Dephosphorylation of paraoxon by hydroxamate ions in micellar media

The rate-surfactant concentration profiles for the reaction of the insecticide paraoxon with hydroxamate ions (R(CO)·NHO⁻, R = CH₃, R = C₆H₅, R = 2-HOC₆H₄) in aqueous solutions of cetyltrimethylammonium salts, CTAX (X⁻ = Br⁻, Cl⁻, SO₃H⁻) have been measured at pH 11.0 at 30 °C. All these profiles are typical of micelle-assisted bimolecular reactions involving interfacial ion exchanges. The salicylhydroxymic acid-CTACl combination is most reactive.     

Substitution effects at α-position of divalent five-membered ring XC4H3M (M = C, Si and Ge)

Full geometry optimizations were carried out on singlet and triplet states of α-substitued divalent five-membered rings XC₄H₃M (X = -NH₂, -OH, -CH₃ -H, -CH₃, -Br, -Cl, -F, -CF₃ and -NO₂; M = C, Si and Ge) by B3LYP method using 6-311++G** basis set. Thermal energy gaps, ΔE_s-t; enthalpy gaps, ΔH_s-t; Gibbs free energy gaps, ΔG_s-t, between singlet (s) and triplet (t) states of above structures were calculated using the GAUSSIAN 03 program. The ΔG_s-t of XC₄H₃C was changed in the order: X = -Cl > -Br > -CH₃ > -H > -CF₃ > -F > -NO₂ > -OH > -NH₂. The changes of ΔG_s-t for XC₄H₃Si and XC₄H₃Ge were in the order: X = -NH₂ > OH > F > Cl > Br > CH₃ > H > CF₃ > NO₂. The relationship between all the parameters such as different energy types, geometry parameters, natural bonding orbital (NBO) charge at atoms, HOMO and LUMO energies, chemical hardness (η), chemical potential (μ), dipole Moment (D), electrophilicity (ω) and the maximum amount of electronic charge, ΔN_max, was presented and discussed.     

Capillary electrophoretic study of thiolated α-cyclodextrin-capped gold nanoparticles with tetraalkylammonium ions

Capillary zone electrophoresis (CZE) has been employed to characterize nanometer-sized thiolated α-cyclodextrin-capped gold nanoparticles (α-CD-S-AuNPs). The addition of tetrabutylammonium (Bu₄N⁺) ions to the run buffer greatly narrows the migration peak of α-CD-S-AuNP. The optimal run buffer was determined to be 10 mM Bu₄N⁺ in 30 mM phosphate buffer at pH 12 and an applied voltage of 15 kV. The effect of various tetraalkylammonium ions on the peak width and electrophoretic mobility (μ_e) of α-CD-S-AuNP was studied in detail. Bu₄N⁺ ions assist in inter-linking the α-CD-S-AuNPs and narrowing the migration peak in CZE. This observation can be explained by the fact that each Bu₄N⁺ ion can simultaneously interact with several hydrophobic cavities of the surface-attached α-CDs on AuNPs. The TEM images show that α-CD-S-AuNPs with Bu₄N⁺ are linked together but in the absence of Bu₄N⁺, they are more dispersed. The migration mechanism in CZE is based on the formation of inclusion complexes between Bu₄N⁺ and α-CD-S-AuNPs which induces changes in the charge-to-size ratio of α-CD-S-AuNPs and μ_e. An inverse linear relationship (r² > 0.998) exists between the μ_e and size of α-CD-S-AuNPs in the core range 1.4–4.1 nm. The CZE analyses are rapid with migration time less than 4 min. A few nanoliters of each of the α-CD-S-AuNP samples were injected hydrodynamically at 0.5 psi for 5 s. Our work confirms that CZE is an efficient tool for characterizing the sizes of α-CD-S-AuNPs using Bu₄N⁺ ions.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

A convenient reagent for generation and stabilization of cationic methallylpalladium complexes containing nitrogen ligands

A convenient synthesis of the easily handled, air stable methallyloxyphosphonium salt [CH₂C(Me)CH₂⁻O-P(NMe₂)₃]⁺[(3,5-(CF₃)₂-C₆H₃)₄B]⁻5 is described. The utility of this reagent in the generation and stabilization of cationic η³-methallyl palladium complexes through oxidative addition reactions is illustrated by the preparation of the stable salts of [(η³-C₄H₇)Pd(NN)]⁺[(3,5-(CF₃)₂-C₆H₃)₄B]⁻ from Pd₂(dba)₃. The molecular structure of one of them has been determined by a single-crystal X-ray diffraction.     

Dibromomethane as one-carbon source in organic synthesis: a versatile methodology to prepare the cyclic and acyclic α-methylene or α-keto acid derivatives from the corresponding terminal alkenes

Ozonolysis of mono-substituted alkenes A-1 followed by reacting with a preheated mixture of CH₂Br₂-Et₂NH affords α-substituted acroleins A-2 in good yields. Under very mild reaction conditions, these α-substituted acroleins A-2 can be easily converted to α-methylene esters A-4, which could be further converted to the corresponding α-keto esters A-5. This methodology can be also applied to the preparation of α-methylene lactones B-4, α-methylene lactams, and α-keto lactones B-5 with various ring sizes.     

Oligomerization of α-olefins by the dimeric nickel bisamido complex [Ni{1-N(PMes2)-2-N(μ-PMes2)C6H4-κN,N′,P,-κP′}]2 activated by methylalumoxane (MAO)

The reaction of Li₂[1,2-{N(PMes₂)}₂C₆H₄], formed in situ from n-BuLi and the corresponding amines, with 1 equiv. of [NiBr₂(DME)] gives [Ni{1-N(PMes₂)-2-N(μ-PMes₂)C₆H₄-κ³N,N′,P-κ¹P′}]₂ (1). After activation by methylalumoxane (MAO), 1 is a highly active catalyst in the oligomerization and isomerization of α-olefins such as ethene, propene, isobutene, 1-hexene and 1,5-hexadiene. For ethene oligomerization turnover frequencies (TOFs) range from 3000 to 79015 h⁻¹, depending on the reaction conditions. The TOF for propene oligomerization reaches 1 190 730 h⁻¹. To our knowledge, catalyst 1, activated by MAO, is the most active catalyst for the oligomerization of propene and outperforms the best known complexes for this reaction. In the reactions with 1-hexene, 1,5-hexadiene and isobutene dimerization and isomerization products were observed.     

Colorimetric and ratiometric fluorescent detection of sulfite in water via cationic surfactant-promoted addition of sulfite to α,β-unsaturated ketone

Three fluorescent probes were constructed by incorporating an α,β-unsaturated ketone to a coumarin fluorophore. The selective addition of sulfite to the alkene of TSP assisted by cetyltrimethyl ammonium bromide (CTAB) micelle can be visualized by dramatic color and ratiometric fluorescence changes. In CTAB–PBS system, the fluorescence intensity ratio at 465 nm and 592 nm (I₄₆₅/I₅₉₂) and the absorbance ratio at 390 nm and 470 nm (A₃₉₀/A₄₇₀) were linearly proportional to sulfite concentration in the range of 0.5–150 μM, and the detection limit was 0.2 μM. Good selectivity and competition of TSP1 towards sulfite over several anions and biological thiols were acquired. Probe TSP1 was used to detect sulfite in three realistic samples (mineral water, sugar and white wine) with good recovery.     

Transition metal alkylidene complexes. Pathways in their formation and tautomerization between bis-alkylidenes and alkyl alkylidynes

Studies from authors’ group (at the University of Tennessee) on alkylidene complexes and α-H migration in alkyl alkylidyne complexes, leading to unusual tautomerization equilibria between bis-alkylidenes and alkyl alkylidynes, are reviewed. Preparation of silyl alkylidene complexes (Me₃ECH₂)₂Ta(CHEMe₃)(SiR₃) [R₃ = (SiMe₃)₃, E = C, 3a, Si, 3b; R₃ = Bu^tPh₂, E = C, 4a, Si, 4b] and the pathway in the formation of 3b are discussed first. Pathways in the formation of archetypical Schrock-type alkyl alkylidenes (Me₃ECH₂)₃TaCHEMe₃ (E = C, 5a; Si, 5b), including the work using Ta(CD₂CMe₃)₅ (21-d₁₀) to confirm that it is the precursor to (Me₃CCD₂)₃TaCDCMe₃ (5a-d₇), are then considered. Tautomerization of silyl alkylidyne (Me₃CCH₂)₂W(CCMe₃)(SiBu^tPh₂) (6a) with bis-alkylidene (Me₃CCH₂)W(CHCMe₃)₂(SiBu^tPh₂) (6b) as well as (Me₃SiCH₂)₃W(CSiMe₃)(PR₃) [R₃ = Me₃, 7a; Me₂Ph, 8a; Me₂(CH₂)₂PMe₂ (DMPE-P), 9a] with (Me₃SiCH₂)₂W(CHSiMe₃)₂(PR₃) (R₃ = Me₃, 7b; Me₂Ph, 8b; DMPE-P, 9b) [P refers to a dangling P atom in Me₂P(CH₂)₂PMe₂] is covered next. Finally the conversion of the tungsten phosphine tautomerization mixtures to alkyl alkylidene alkylidyne (Me₃SiCH₂)W(CHSiMe₃)(CSiMe₃)(PR₃)₂ [(PR₃)₂ = (PMe₃)₂, 10; (PMe₂Ph)₂, 11; DMPE, 12], including its pathway, is presented.     

A facile enantioselective synthesis of (S)-N-(5-chlorothiophene-2-sulfonyl)-β,β-diethylalaninol via proline-catalyzed asymmetric α-aminooxylation and α-amination of aldehyde

A high-yielding enantioselective synthesis of the bioactive (S)-N-(5-chlorothiophene-2-sulfonyl)-β,β-diethylalaninol (1), a Notch-1-sparing γ-secretase inhibitor metabolite (with EC₅₀ = 28 nM) effective in reduction of Aβ production in vivo, has been realized starting from readily available 3-pentanone. The key steps of the synthesis are proline-catalyzed α-aminooxylation and α-amination of aldehyde; the latter contributing an overall yield of 45.2% and 98% ee.     

An efficient preparation of novel 5-fluoropyrazolin-3-one derivatives from α-trifluoromethylated α-arylacetates

The reactions of α-trifluoromethylated α-arylacetates 1 with 3 equiv of hydrazine, methylhydrazine or benzylhydrazine in 1,4-dioxane at reflux for 24 h afforded the corresponding 5-fluoropyrazolin-3-one derivatives 3a-m in high yields. Similarly, treatment of 1 with 3 equiv of PhNLiNH₂ in THF at −78 °C, followed by warming to room temperature, resulted in the formation of 3n-s in high yields.     

Indium(III) bromide catalyzed direct azidation of α-hydroxyketones using TMSN3

The direct catalytic azidation of 2-hydroxy-1,2,2-triarylethanones occurs at room temperature using 2 mol % of InBr₃ as Lewis acid and TMSN₃ as soluble azide source. 2-Azido-1,2,2-triarylethanones have been isolated in excellent yields. The role of aryl group and stereoelectronic factors indicate that the mechanism may involve the formation of a stable carbenium ion towards azidation.     

A synthetic, structural and reactivity study of [(η-C4R4)Co(η-C5H4X)] complexes, R = Me or Et; X = CHO, CHCHFc, CHCH(η-C5H4)Co(η-C4Ph4), CHC(CN)2: Unexpected formation of [(η-cyclopentadienyl)(η-3,4,5,6-tetraethyl-α-pyrone)cobalt]

The tetraethyl- and tetramethyl-cyclobutadiene complexes [(η⁴-C₄R₄)Co(η⁵-C₅H₄CHO)] R = Et, 5, R = Me, 7, and [(η⁴-C₄R₄)Co(η⁵-C₅H₄CO₂Me)] R = Et, 6, R = Me, 8, are conveniently prepared by photolysis of the corresponding isocobaltocenium cations [(η⁴-C₄R₄)Co(η⁶-C₆H₅Me)]⁺ in acetonitrile, and subsequent treatment with Na[C₅H₄CHO] or Na[C₅H₄CO₂Me]. The aldehydes 5 and 7 undergo Wittig and Knoevenagel reactions with [FcCH₂PPh₃]I and CH₂(CN)₂, to form [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH=CHFc)] and [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH=C(CN)₂], 11 and 15, respectively. The Horner-Wittig reaction of [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH₂P(O)(OEt)₂] with [(η⁴-C₄Ph₄)Co(η⁵-C₅H₄CHO)] yields [(η⁴-C₄R₄)Co(η⁵:η⁵-C₅H₄CHCH-C₅H₄)Co(η⁴-C₄Ph₄)], 12 and 13. [(η⁴-C₄Me₄)Co(η⁵-C₅H₄CHO)] also reacts with t-BuLi and FcLi to furnish the corresponding secondary alcohols, 16 and 17, respectively. Surprisingly, the attempted direct synthesis of 5 by reaction of Na[C₅H₅] and ethyl formate with [(η⁴-C₄Et₄)Co(CO)₂I], 1, instead yielded [(η⁵-C₅H₅)Co(η⁴-3,4,5,6-tetraethyl-α-pyrone)], 18, and a mechanistic proposal is advanced. The X-ray crystal structures of 1, 7, 8, 11(Z), 15 and 18, and also the isocobaltocenium salts [(η⁴-C₄Et₄)Co(η⁶-C₆H₅Me)][PF₆], 2, and [(η⁴-C₄Et₄)Co(η⁶-1,3,5-C₆H₃Me₃)][PF₆], 4, are reported.     

Synthesis, characterisation and solid state structures of α-diimine cobalt(II) complexes: Ethylene polymerisation tests

A series of cobalt(II) compounds of the type [CoX₂(α-diimine)] were synthesised by direct reaction of anhydrous CoCl₂ or CoI₂ and the corresponding α-diimine ligand, in CH₂Cl₂: [CoI₂(o,o′,p-Me₃C₆H₂-DAB)] (1), [CoI₂(o,o′-ⁱPr₂C₆H₃-DAB)] (2), (where Ar-DAB = 1,4-bis(aryl)-2,3-dimethyl-1,4-diaza-1,3-butadiene), and [CoCl₂(o,o′,p-Me₃C₆H₂-BIAN)] (3), [CoCl₂(o,o′-ⁱPr₂C₆H₃-BIAN)] (4), and [CoI₂(o,o′-ⁱPr₂C₆H₃-BIAN)] (5) (where Ar-BIAN = bis(aryl)acenaphthenequinonediimine). All compounds were characterised by elemental analyses, IR, mass spectrometry, and X-ray diffraction whenever possible. The crystal structures of compounds 2-4 showed, in all cases, distorted tetrahedral geometries about the Co, built by two halogen atoms and two nitrogen atoms of the α-diimine ligand. Compounds 3 and 4, as well as [CoCl₂(o,o′,p-Me₃C₆H₂-DAB)] (1a), and [CoCl₂(o,o′-ⁱPr₂C₆H₃-DAB)] (2a), were activated by methylaluminoxane (MAO) and tested as catalysts for ethylene polymerisation, showing low catalytic activities. Selected polyethylene (PE) samples were characterised by ¹H and ¹³C NMR and FT-IR spectroscopies, and by differential scanning calorimetry (DSC), revealing branching microstructures (2.5-5.5%).     

Synthesis of phenylalkyl-substituted polyhydroxypiperidines as potent inhibitors for α-l-fucosidase

Synthesis and inhibitory activities against α-l-fucosidase of phenylalkyl-substituted polyhydroxypiperidines have been described. Among the newly synthesized compounds, 2,4,6-trichloro derivative (16q) showed very high inhibitory activity against α-l-fucosidase with IC₅₀ value of 0.005 μM, and K_i values of 0.0011 μM, respectively.     

Oligomerisation of ethylene to linear α-olefins by tetrahedral cobalt(II) precursors stabilised by benzo[b]thiophen-2-yl-substituted (imino)pyridine ligands

On activation by MAO, 2-(imino)pyridine cobalt dichlorides bearing a benzo[b]thiophen-2-yl substituent in the 6-position of the pyridine ring oligomerise ethylene to α-olefins with turn-over-frequencies as high as 1.5 × 10⁶ mol of C₂H₄ converted (mol of Co × h)⁻¹ and productivities as high as 3769 kg of oligomers (mol of Co × h × bar)⁻¹. Aldimine precursors are more active than ketimine analogues, yet ketimines give higher molecular weight oligomers.     

Temperature-controlled highly selective dimerization of α-methylstyrene catalyzed by Brönsted acidic ionic liquid under solvent-free conditions

A temperature-controlled highly selective dimerization of α-methylstyrene to produce 2,4-diphenyl-4-methyl-1-pentene and 1,1,3-trimethyl-3-phenylindan was catalyzed by Brönsted acidic ionic liquid [Hmim]⁺BF₄⁻. At 60 °C, 2,4-diphenyl-4-methyl-1-pentene was formed in 93% selectivity with >92% conversion under a solvent-free condition while 1,1,3-trimethyl-3-phenylindan could be obtained in 100% selectivity when the reaction temperature was increased to 170 °C. The ionic liquid [Hmim]⁺BF₄⁻ could be reused with almost no loss of activity.