Ion Flux from the Cathode Region of a Vacuum Arc

This paper reviews the properties of the cathode ion flux generated in the vacuum arc. The structure and distribution of mass erosion from individual cathode spots and the characteristics of current carriers from the cathode region at moderate arc currents are described. An appreciable ion flux (～10% of total arc current) is emitted from the cathode of a vacuum arc. This ion flux is strongly peaked in the direction of the anode, though some ion flux may be seen even at angles below the plane of the cathode surface. The observed spatial distribution of the ion flux is expressed quite well as an exponential function of solid angle. The ion flux is quite energetic, with average ion potentials much larger than the arc voltage, and generally contains a considerable fraction of multiply-charged ions. The average ion potential and ion multiplicity increase significantly for cathode materials with higher arc voltages, but decrease with increasing arc current for a particular material. The main theories concerning ion acceleration in cathode spots are the potential hump theory (PH), which assumes that all ions are created at the same potential, and the gas dynamic theory (GD), which assumes that all ions are created with the same flow velocity. Experimental data on the potentials and energies of individual ions indicates that these theories in their original forms are not quite correct, however extensions or modifications of the PH and GD theories seem very likely to be able to predict correct values for the charge states, potentials, and energies of individual ions.     

Effect of the discharge parameters on the generation of deuterium ions in the plasma of a high-current pulsed vacuum arc with a composite zirconium deuteride cathode

We have studied the mass and charge composition of an ion beam extracted from the plasma of a vacuum arc with a zirconium deuteride cathode for various durations of the arc current pulse (half width at half amplitude) of 2, 4, 7, and 17 μs. It has been established that the fraction of deuterium ions in the vacuum arc plasma increases with the current and the dependence achieve saturation for current of about 1 kA. For the fraction of deuterium atoms in the cathode at a level of 40%, the fraction of deuterium ions in the vacuum arc plasma can exceed 80%. The experimental results have been interpreted theoretically. It has been shown that the main sources of deuterium ions in a microsecond arc discharge are cathode spots. We have developed a model of deuterium desorption during the operation of cathode spots for quantitatively estimating the concentration of deuterium ions in the arc plasma.     

A physical model of the low-current-density vacuum arc

A one-dimensional (1-D) physical model of the low-current-density steady-state vacuum arc is proposed. The model is based on the continuity equations for ions and electrons and the energy balance for the discharge system; the electric potential distribution in the discharge gap is assumed to be nonmonotonic. It is supposed that the ion current at the cathode is generated within the cathode potential fall region due to the ionization of the evaporated atoms by the plasma thermal electrons having Boltzmann's energy distribution. The model offers a satisfactory explanation for the principal regularities of a hot-cathode vacuum arc with diffuse attachment of the current. The applicability of the model proposed to the explanation of some processes occurring in a vacuum arc, such as the flow of fast ions toward the anode, the current cutoffs and voltage bursts, and the backward motion of a cathode spot in a transverse magnetic field is discussed     

Investigation of the Directional Velocities of Ions in a Vacuum Arc Discharge by Emission Methods

This paper is devoted to an investigation of the directional velocities of the ions generated in cathode spots of vacuum arc discharges. By using emission methods of studying the processes in a vacuum arc discharge, which involve the determination of the parameters and characteristics of the discharge plasma by analyzing the ion current extracted from the plasma and the ion charge states, the velocities of ions have been determined for the majority of cathode materials available in the periodic table. Is has been shown that at a low pressure of the residual gas in the discharge gap the directional velocities of the ions do not depend on the ion charge state. Comparison of the data obtained with calculated values allows the conclusion that the acceleration of ions in a vacuum arc occurs by the magnetohydrodynamic mechanism.     

Properties of Anchored Cathode Spots of a Dc Mercury Vacuum Arc

Ensembles of anchored cathode spots of a dc mercury vacuum arc have been studied by fast framing and streak photography. From these photographs, several statistical properties of the cathode spots have been determined: distribution functions for their diameters, velocities, and displacements, as well as spot shape and average values for the spot current and its density. The measurements showed that the anchored cathode spots were quasi-stationary. No indications of a microstructure within the individual cathode spots were found at an optical resolution of 0.37 ?m. Strong evidence is presented that the dc cathode spot parameter values reported here are typical for a clean mercury surface, and that those reported in the earlier literature are typical for impurity-covered surfaces.     

Investigation of unstable motion characteristics of vacuum arc cathode spots between transverse magnetic field contacts

With the improvement of the current level of power grids, the requirements of the opening level of the vacuum switches are also increasing. Vacuum arc cathode spots provide steam and electrons and, to a certain extent, determine the opening capacity of the vacuum switch. In this paper, a vacuum arc cathode spot research platform based on the de-mountable vacuum chamber is constructed. The characteristics of the vacuum arc cathode spots under the transverse magnetic field (TMF) contacts are assessed by a high-speed charge coupled device. The experimental results show that the cathode spot diffusion process can be divided into three processes through cathode spot distribution, arc voltage and current: initial diffusion stage of cathode spots, unstable motion stage of cathode spots, and extinguishing stage. The motion mode of cathode spots during unstable motion stage can be divided into cathode spots group stagnation (CSGS) to multi-cathode jet (MCJ) switch mode, cathode spots group motion (CSGM) to MCJ switch mode, CSGM mode, and MCJ mode. The effects of peak current and contact diameter on unstable motion mode were analysed.     

Characteristic features of the emission properties of pulsed broad-beam ion and plasma sources utilizing the evaporation of metal by a vacuum arc

An experimental confirmation was obtained of the anode potential fall effect in pulsed broad-beam ion and plasma sources utilizing the evaporation of metal by a vacuum arc. An increase in the overall voltage across the arc discharge was discovered. The investigations demonstrated that the magnitude of the positive anode fall depends on the structural features of the ion source and are determined by the ratio of the plasma flux directed onto the lateral surface of the anode to the total plasma flux from the cathode spot. It was established that the anode fall effect is controlled and makes it possible to influence the homogeneity of the ion current distribution over the beam cross section, the efficiency of extracting ions from the plasma, and the charge composition of the ion flux.Scientific-Research Institute of Nuclear Physics, Polytechnic University, Tomsk. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 2, pp. 82–92, February, 1994.     

Application of vacuum arc cathode spot model to graphite cathode

A model of near-electrode processes is applied here to describe the behavior of cathode spots on graphite cathode in vacuum arc. The physical model is based on a kinetic treatment of cathode evaporation, electron emission from the cathode, and plasma production. The model consists of physical assumptions and a system of equations that are formulated in the paper. Spot parameters, such as cathode erosion rate, cathode potential drop, cathode surface temperature, current density, electric field, and plasma density, temperature, and velocity in the near-electrode region are calculated numerically. The calculation includes the dependence of spot parameters on spot current and spot lifetime. The variation of spot parameters as a function of spot lifetime are very strong at lifetimes shorter than 10 μs. The calculations indicate that Joule heating in the cathode body is significant, and may exceed cathode heating by the ion heat flux. Calculated spot parameters are compared with the corresponding experimental data for relatively low arc currents (<100 A) and their agreement is discussed     

真空弧放电TiH合金阴极表面形貌分析

TiH合金电极是一种含氢量非常高的金属材料,用它作真空弧离子源的电极,可在真空环境下产生强度非常高的氢离子流。相比纯金属材料电极,TiH电极除了出现真空弧放电特有的融蚀现象外,还存在气体释放过程,所以它的表面形貌具有一定的独特性。利用扫描电子显微镜观察了单次放电和多次放电后阴极表面形貌,发现阴极斑在阴极表面微裂纹附近连续分布,气体释放生成很多小孔,使阴极斑区域呈絮状结构;弧流越大,阴极斑数量越多;多次放电后,阴极斑朝含氢量多的地方移动。该结果有助于了解含氢电极的真空弧放电过程,对该类放电的应用具有一定参考意义。     

纵磁作用下真空电弧单阴极斑点等离子体射流三维混合模拟

真空电弧的特性直接受到从阴极斑点喷射出的等离子体射流的影响,对等离子体射流进行数值仿真有助于我们深入了解真空电弧的内部物理机制.然而,磁流体动力学和粒子云网格仿真方法受限于计算精度和计算效率的原因,无法有效地应用于真空电弧等离子体射流仿真模拟.本文开发了一套三维等离子体混合模拟算法,并在此基础上建立了真空电弧单阴极斑点射流仿真模型,模型中将离子作宏粒子考虑,而电子作无质量流体处理,仿真计算了自生电磁场与外施纵向磁场作用下等离子体的分布运动状态.仿真结果表明,单个阴极斑点情况下真空等离子体射流在离开阴极斑点后扩散至极板间,其整体几何形状为圆锥形,离子密度从阴极到阳极快速下降.外施纵向磁场会压缩等离子体,使得等离子体射流径向的扩散减少并且轴线上的离子密度升高.随着外施纵向磁场的增大,其对等离子体射流的压缩效应增强,表现为等离子体射流的扩散角度逐渐减小.此外,外施纵向磁场对等离子体射流的影响也受到电弧电流大小的影响,压缩效应随电弧电流的增加而逐渐减弱.     

An electrodynamic vacuum arc ion acceleration mechanism based onAmpere's force law

It is known that the motion of cathode spots is of electromagnetic origin, thus leading to methods of steering the spots by controlling the direction of the self and applied magnetic fields. The author discusses the ion flux from the cathode spot, focusing on two well-recognized features of this flux that are difficult to explain. These are the anomalously high energies of the ions, and their highly anisotropic spatial distribution. An electrodynamic acceleration mechanism, based on Ampere's force law, is proposed as an explanation of these phenomena. The theory is shown to be consistent with existing particle production models, and also provides a consistent solution to macroparticle emission and retrograde motion     

Charge state and residence time of metal ions generated from amicrosecond vacuum arc

Metal ions generated from a microsecond vacuum arc were measured using a time-of-flight (TOF) method. A point-plane vacuum gap was fired by an impulse voltage to generate metal ions. The risetime and time constant for the decay of the arc current were 0.1 and 4.5 μs, respectively. TOF ion currents were measured for variable ion extraction times after the arc ignition. At a lead cathode, Pb⁺ and Pb ⁺⁺ ions were detected for ion extraction times less than 45 μs. The average charge-state fractions of the Pb⁺ and Pb ⁺⁺ ions were 91 and 9%, respectively. At a copper cathode, Cu ⁺, Cu⁺⁺, and Cu⁺⁺⁺ ions were detected for ion-extraction times less than 12.5 μs, and the average charge-state fractions were 42, 41, and 17%, respectively. The residence times of the generated lead and copper ions were also discussed     

Influence of a current jump on vacuum arc parameters

Based on time of flight method, influence of short time vacuum arc current jump on arc plasma parameters were investigated. Superposition of the current pulse of a vacuum arc with a high operating voltage results in the appearance of ions of higher charge state in the discharge plasma and in an increase in the mean ion charge state for most of the cathode materials used in the experiment. The method of a “short-time current jump” can be also used to investigate the parameters of a vacuum arc, in particular to estimate the ion direct velocities in vacuum arc plasmas. Our estimates show that in the presence of a current step the ion velocities are almost identical for all differently charged ions and depend only on the peak current and the ion mass     

Vacuum Arc Anode Phenomena

This paper briefly reviews anode phenomena in vacuum arcs, specially experimental work. It discusses, in succession, arc modes at the anode, anode temperature measurements, anode ions, transitions of the arc into various modes (principally the anode spot mode), and theoretical explanations of anode phenomena. The two most common anode modes in a vacuum arc are a low current mode where the anode is basically passive, acting only as a collector of particles emitted from the cathode, and a high current mode with a fully developed anode spot. Characteristically this anode spot has a temperature near the atmospheric boiling point of the anode material and is a copious source of vapor and energetic ions. However, other anode modes can exist. A low current vacuum arc with electrodes of readily sputterable material may emit a flux of sputtered atoms from the anode. Usually this sputtered flux will have little effect upon the vacuum arc, but in certain circumstances it could be significant. A vacuum arc doesn't always transfer directly from a low current mode to the anode spot mode. In appropriate experimental conditions, formation of an anode spot may be preceded by the formation of an anode footpoint. This footpoint is luminous, but much cooler than a true anode spot. Finally, (again in appropriate circumstances) several small anode spots may form instead of one large anode spot. With sufficient increase in arc current or arcing time these will usually combine to form a single large active spot.     

A hydrodynamic model of vacuum arc plasmas

The properties of plasmas expanding from cathode spots of vacuum arcs are calculated with a one-dimensional two-fluid model. The system of simplified hydrodynamic equations can be solved under stationary conditions using asymptotic power series. Although necessarily only an approximation, such analytical solutions prove to be advantageous compared with numerical integrations. All the plasma parameters are functions of (I/r)^2/5 (current, I: distance, r). The three forces accelerating the ions to high kinetic energies are quantitatively calculable: the electric field, the ion pressure gradient, and the electron-ion friction. The potential is decreasing towards the anode, and the residence of the plasma is negative. The ion temperature reaches only about 35% of the electron temperature. Although only asymptotic, the solution is suited to describe the arc plasma in a sufficient manner all over the expansion region     

氘化物阴极真空弧放电光斑分布

氘化物真空弧放电在许多领域均有应用,如无损检测、石油探井、中子活化分析等。和金属阴极不同,氘化物阴极放电时会释放大量的气体分子,表现出许多不同性质。采用放大镜头和ICCD相机观察了氘化物阴极真空弧放电光斑分布。测量系统的空间分辨率约为5 μm,时间分辨率最小2 ns。放电脉冲半高全宽（FWHM）0.9 μs,弧流波形为半周期正弦波。实验结果表明,氘化物真空弧放电时,所有阴极斑聚集为一个群落,表现为一个大光斑;在液滴作用下,阴极斑群落偶尔也会分裂为两个或多个群落;光斑形状不受弧流影响,但面积和亮度会随弧流增加而增大。氘化物阴极放电斑点聚集有利于产生高密度等离子体,提高放电效率。     

Measurements of vacuum arc ion charge-state distributions

The charge-state distribution of ions generated in the metal vapor vacuum arc under a wide range of experimental conditions was measured. The experiments were carried out using an ion source in which the metal vapor vacuum arc is used as the method of plasma production and by which a high-quality, high-current beam of metal ions is produced. Charge-state spectra were measured using a time-of-flight diagnostic; arc voltages were also measured. Parameters that were varied include cathode material, arc current, axial magnetic field strength, neutral gas pressure, and arc geometry     

From Field Emission to Vacuum Arc Ignition: A New Tool for Simulating Copper Vacuum Arcs

Understanding plasma initiation in vacuum arc discharges can help to bridge the gap between nano‐scale triggering phenomena and the macroscopic surface damage caused by vacuum arcs. We present a new twodimensional particle‐in‐cell tool to simulate plasma initiation in direct‐current (DC) copper vacuum arc discharges starting from a single, strong field emitter at the cathode. Our simulations describe in detail how a sub‐micron field emission site can evolve to a macroscopic vacuum arc discharge, and provide a possible explanation for why and how cathode spots can spread on the cathode surface. Furthermore, the model provides us with a prediction for the current and voltage characteristics, as well as for properties of the plasma like densities, fluxes and electric potentials in a simple DC discharge case, which are in agreement with the known experimental values. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

含氘电极真空弧等离子体空间分布特性诊断研究

真空弧放电等离子体含有多种离子成分,并且各离子在空间上具有不同的分布规律.本文针对金属氘化物电极真空弧离子源,搭建了一台紧凑型磁分析装置,用来研究放电等离子体中氘离子与金属离子的空间分布.当离子源弧流为100 A左右时,该装置能有效地传输引出束流,并且具有较好的二次电子抑制效果,可准确获得各离子流强.利用该装置测量并获得了氘化钛含氘电极真空弧放电等离子体内氘离子和钛离子空间分布规律,结果表明:径向上,氘离子和钛离子都呈高斯分布,但氘离子分布均匀,而钛离子相对集中在轴线附近,导致轴线附近氘离子比例最低;轴向上,所有离子数量都以自然指数函数减少,而且相对幅度接近,所以氘离子比例几乎不变.本文研究结果不仅有助于理解真空弧放电等离子体膨胀过程,还可以指导金属氘化物电极真空弧离子源及其引出设计.     

带状真空电弧磁过滤器等离子体分布特性及制备类金刚石膜研究

采用大尺寸矩形石墨靶作为真空阴极电弧源, 研制了带状真空电弧磁过滤器. 使用法拉第杯和朗缪尔探针对90 ℃弯曲磁过滤器中的带状等离子体出口所在平面的15个区域的离子能量和密度进行了测试; 用该带状真空电弧磁过滤器制备了类金刚石膜(diamond-like carbon, DLC); 对相应位置上的类金刚石膜进行了Raman分析和膜厚测量. 结果表明: 磁过滤器出口所在平面的15个划分区域中离子能量分布接近麦克斯韦分布, 离子能量分布与类金刚石膜的结构具有明显的对应特征, 离子密度分布与DLC膜膜厚分布相互之间具有相关性.