Synthesis of formazans from Mannich base of 5-(4-chlorophenyl amino)-2-mercapto-1,3,4-thiadiazole as antimicrobial agents

5-(4-Chlorophenyl amino)-2-mercapto-1,3,4-thiadiazole (I) was refluxed with formaldehyde and ammonium chloride in ethanol yielding the Mannich base 5-(4-chloro phenyl amino)-3-aminomethyl-2-mercapto-1,3,4-thiadiazole (II). Esterification with 4-chloro-(2,6-dinitro phenoxy)-ethyl acetate (III) under anhydrous conditions gave the intermediate (IV). Subsequent hydrazinolysis with hydrazine hydrate gave the corresponding hydrazide 3-amino methyl-5-(4-chloro phenyl amino)-2-mercapto-4′-(2′,6′-dinitro phenoxy)-acetyl hydrazide (V). The hydrazide was converted into the Schiff bases (VI_a–b) by reacting with 2-chlorobenzaldehyde and 3-methoxy-4-hydroxy benzaldehyde in presence of methanol containing 2–3 drops of acetic acid. Diazotisation with aromatic amines, sulphanilic acid and sulphur drugs gave the formazans (VII_a–g) respectively. Chemical structures have been established by elemental analysis and the spectral techniques of FTIR, ¹H NMR and mass. Antimicrobial activity (in vitro) was evaluated against the two pathogenic bacterial strains. Escherichia coli and Salmonella typhi, three fungal strains Aspergillus niger, Penicillium species and Candida albicans. The compounds have shown moderate activity.     

Microwave-induced and conventional heterocyclic synthesis: An antimicrobial entites of newer quinazolinyl-Δ2-pyrazolines

Heterocyclic compounds containing pyrazolines were reported to possess significant biological activity. Synthesis of 2-(ω-chloroacetonyl)-3-p-fluorophenyl-6-bromoquinazoline-4(3H)-ones (2), 2-(ω-hydrazinoacetonyl)-3-p-fluorophenyl-6-bromoquinazoline-4(3H)-ones (3) and 1′-[3H-3-p-fluorophenyl-4-oxo-6-bromoquinazoline-2-acetonyl]-3′-[1-o-chlorophenyl-3-methyl-5-azomethine-2-pyrazolidene]-5′-(substituted phenyl)-Δ²-pyrazolines (4a–j) have been described. Some of the new compounds were tested against bacteria (Gram –ve and Gram +ve) and fungi.     

Novel thiosemicarbazone derivatives containing benzimidazole moiety: Green synthesis and anti-malarial activity

A series of (E)-2-[5-chloro-1-(1H-benzo[d]imidazol-2-yl)ethylidene] N-(substituted) hydrazine carbothioamide (7a–7t) and (E)-2-[1-(1H-benzo[d]imidazol-2-yl)ethylidene] N-(substituted) hydrazine carbothioamide (8a–8t) were prepared via the synthesis of 1-(substituted-1H-benzimidazol-2-yl) ethanol (3a–3b) which was synthesized by the condensation of substituted o-phenylenediamine (2a–2b) with dl-lactic acid (1) followed by oxidation with sodium hypochlorite in mild acidic condition to form the corresponding ketones 4a–4b. Final compounds were formed by condensation of 4a–4b with different thiosemicarbazides 6a–6t. A total of 40 compounds were synthesized and characterized by FT-IR, ¹H NMR, ¹³C NMR, Mass spectral technique and elemental analysis, in addition they were evaluated for anti-malarial properties. Among the compounds tested 7o, 7p, 7q, 7r, 7s, 8e and 8h exhibited good antimalarial activity in vitro.     

The reaction of 2-(1-hydropolyfluoro-1-alkenyl)-4H-3,1-benzoxin-4-ones with dinucleophilic reagents: a convenient route to fluoroalkylated nitrogen-containing tricyclic compounds

The reactions of 2-(1-hydropolyfluoro-1-alkenyl)-4H-3,1-benzoxin-4-ones (2) with hydrazine hydrate and phenyl hydrazine were investigated. The reaction of 2 with hydrazine hydrate in ethanol under reflux condition readily gave 2-fluoroalkyl-4H-pyrazolo[5,1-b]quinazolin-9-ones (3) in high yields. The reaction of 2 with phenyl hydrazine, however, resulted in the formation of 2-(2-phenyl-5-fluoroalkyl-2H-pyrazol-3-yl) benzoic acids (7). Further treatment of 7 with PPA gave 1-phenyl-4,9-dihydro-3-fluoroalkyl-1H-pyrozolo[3,4-b]quinolin-4-ones (4) in 65-80% overall yields.     

Rare-earth metal dichloride and bis(alkyl) complexes containing amidinate-amidopyridinate ligands: synthesis,structure, and reactivity

A reaction of anhydrous yttrium chloride with an equimolar amount of lithium amidinateamidopyridinate obtained in situ by metallation of N,N’-bis(2,6-dimethylphenyl)-N-{6-[(2,6-dimethylphenyl)amino]pyridin-2-yl}acetimidamide ((2,6-Me₂C₆H₃)NH(2,6-C₆H₃N)N(2,6-Me₂C₆H₃)C(Me)=N(2,6-Me₂C₆H₃), L¹H) (1) with n-butyllithium in THF at–70 °C was used to synthesize the yttrium dichloride complex (L¹)YCl₂(THF)₂ (2). The lutetium bis(alkyl) complex, namely, N’-(2,6-diisopropylphenyl)-N-(2,6-dimethylphenyl-N-{6-[(2,6-dimethylphenyl)amido]pyridin-2-yl}acetimidoamidinatebis(trimethylsilylmethyl)lutetium (4), was obtained by the reaction of N’-(2,6-diisopropylphenyl)-N-(2,6-dimethylphenyl)-N-(6-((2,6dimethylphenyl)amino)pyridin-2-yl)acetimidamide ((2,6-Me₂C₆H₃)NH(2,6-C₆H₃N)N-(2,6-Me₂C₆H₃)C(Me)=N(2,6-Pr ₂ ⁱ C₆H₃), L²H (3)) with an equimolar amount of Lu(CH₂SiMe₃)₃(THF)₂. Complex 4 was found to be very stable and did not show indications of C—H-activation and other kinds of disintegration in benzene or toluene solution even upon prolonged heating at 60 °C. The reaction of complex 4 with an equimolar amount of 2,6-diisopropylaniline in toluene solution at room temperature led to the formation of the lutetium alkyl-anilide complex (L²)Lu(CH₂SiMe₃)(NH-2,6-Pr ₂ ⁱ C₆H₃) (5). A three-component system 4—AlBu ₃ ⁱ —[X][B(C₆F₅)₄] ([X] = [Ph₃C], [PhNHMe₂], the molar ratio of 1: 10: 1) was found to catalyze polymerization of isoprene.     

Synthesis and solid-state structure of thermally stable linear bi-pyrazoles

The long and rigid bi-pyrazolyl-based ligands 2,6-bis[4-(1H-pyrazol-4-yl)phenyl]pyrrolo[3,4-f]isoindole-1,3,5,7(2H,6H)-tetrone, L1, and 2,5-bis[4-(1H-pyrazol-4-yl)phenyl]thiazolo[5,4-d]thiazole, L2, were isolated in pure form, with satisfying yields, as very insoluble polycrystalline materials. Their thermal behavior was investigated by coupling thermal analyses and variable-temperature X-ray powder diffraction measurements. Their crystal structures were unraveled from powder diffraction data by a rather unconventional structure determination approach, without the a priori knowledge of the unit cell parameters. Inline with shorter analogues, successfully employed in the formation of porous MOFs with intriguing functional properties, L1 and L2 are promising to construct higher-porosity materials, potentially capable of hosting nano-sized guests.     

Synthesis and structural characterization of η-allyl(α-diimine)nickel(II) complexes bearing trimethylsilyl groups

A set of isomeric para- and meta-trimethylsilylphenyl ortho-substituted N,N-phenyl α-diimine ligands [(Ar-NC(Me)-(Me)CN-Ar) Ar=2,6-di(4-trimethylsilylphenyl)phenyl (16); Ar=2,6-di(3-trimethylsilylphenyl)phenyl (17)] have been synthesized through a two-step procedure. The palladium-catalysed cross-coupling reaction between 2,6-dibromophenylamine (7) and 4-trimethylsilylphenylboronic acid (8), 3-trimethylsilylphenylboronic acid (9) was used to prepare 4,4^′-bis(trimethylsilyl)-[1,1^′;3^′,1″]terphenyl-2^′-ylamine (10) and 3,3^′-bis(trimethylsilyl)-[1,1^′;3^′,1″]terphenyl-2^′-ylamine (11). The di-1-adamantylphosphine oxide Ad₂P(O)H (13) and di-tert-butyl-trimethylsilylanylmethylphosphine tert-Bu₂P-CH₂-SiMe₃ (14) were used for the first time as ligands for the Suzuki coupling. The condensation of 2,2,3,3-tetramethoxybutane (15) with anilines 10 and 11 afforded α-diimines 16 and 17. The reaction of π-allylnickel chloride dimer (18), α-diimines (16), (17) and sodium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (BAF) (19) or silver hexafluoroantimonate (20) led to two sets of isomeric complexes [η³-allyl(Ar-NC(Me)-(Me)CN-Ar)Ni]⁺ X⁻, [Ar=2,6-di(4-trimethylsilylphenyl)phenyl, X=BAF (3), X=SbF₆ (4); Ar=2,6-di(3-trimethylsilylphenyl)phenyl, X=BAF (5), X=SbF₆ (6)]. The steric repulsion of closely positioned trimethylsilyl groups in 4 caused the distortion of the nickel square planar coordination by 17.6° according to X-ray analysis.     

Microwave synthesis,characterization and antimicrobial study of new pyrazolyl-oxopropyl-quinazolin-4(3H)-one derivatives

Heterocyclic compounds containing pyrazolyl-oxopropyl-quinazolin-4(3H)-one are reported to possess significant biological activity. Syntheses of 6-bromo-2-(3-chloro-2-oxopropyl)-3-(4-fluorophenyl)quinazolin-4(3H)-one 2 6-bromo-3-(4-fluorophenyl)-2-(3-hydrazinyl-2-oxopropyl)quinazolin-4(3H)-one 3 and 6-bromo-2-(3-(3-(4-(1-(2-chlorophenyl)-3-methyl-1H-pyrazol-5(4H)-ylideneamino)phenyl)-5-(substituted phenyl)-4,5-dihydro-1H-pyrazol-1-yl)-2-oxopropyl)-3-(4-fluorophenyl)quinazolin-4(3H)-one 5a–j using microwave irradiation have been described. These compounds have been characterized on the basis of the UV, IR, ¹H NMR, ¹³C NMR, Mass and elemental analysis. Compounds have been evaluated for their antimicrobial activity.     

A novel building block for the synthesis of isofagomin analogues

The de novo synthesis of the novel potent building blocks phenyl (R)-3-acetoxymethyl-3,6-dihydro-2H-pyridine-1-carboxylate (−)-7 and phenyl (S)-3-butyryl-oxymethyl-3,6-dihydro-2H-pyridine-1-carboxylate (+)-8 starting from commercially available methyl-1-benzyl-4-oxo-3-piperidinecarboxylate is described. The key steps are the enantioselective esterification of the racemic alcohol 6 and the enantioselective hydrolysis of the racemic acetate 5, respectively, using lipase P from Pseudomonas caepacia.     

Synthesis and Antimicrobial Activity of Quinazolin-4(3H)-ones Incorporating Sulfonamido-4-thiazolidinone

Some new derivatives 7‐chloro‐2‐[2‐(2,6‐dichlorophenyl)amino]benzyl‐3‐[4‐(2‐substituted phenyl‐4‐oxo‐ thiazolidin‐3‐yl)phenyl]sulfonamido‐quinazolin‐4(3H)‐ones 5a – 5l were synthesized from 2‐[2‐(2,6‐dichloro‐phenyl)amino]phenyl acetic acid via acid chloride, benzoxazinone, amino quinazolin‐4(3H)‐one and Schiff base formation. The synthesized compounds were screened for in vitro antibacterial and antifungal activities by broth micro dilution method. Some of the Schiff base as well as 4‐thiazolidinone derivatives showed promising antibacterial activity while pronounced antifungal activity was observed against C. albicans.     

Synthesis of 1-methyl-7-(trifluoromethyl)-1H-pyrido[2,3-c][1,2]thiazin-4(3H)-one 2,2-dioxide

The reaction of methyl 2-bromo-6-(trifluoromethyl)-3-pyridinecarboxylate ( 1 ) with methanesulfonamide gave methyl 2-[(methylsulfonyl)amino]-6-(trifluoromethyl)-3-pyridine-carboxylate ( 2 ). Alkylation of compound 2 with methyl iodide followed by cyclization of the resulting methyl 2-[methyl(methylsulfonyl)amino]-6-(trifluoromethyl)-3-pyridinecarboxylate ( 3 ) yielded 1-methyl-7-(trifluoromethyl)-1H-pyrido[2,3-c][1,2]thiazin-4(3H)-one 2,2-dioxide ( 4 ). The reaction of compound 4 with α,2,4-trichlorotoluene, methyl bromopropionate, methyl iodide, 3-trifluoromethylphenyl isocyanate, phenyl isocyanate and 2,4-dichloro-5-(2-propynyloxy)phenyl isothiocyanate gave, respectively, 4-[(2,4-dichlorophenyl)methoxy]-1-methyl-7-(trifluoromethyl)-1H-pyrido[2,3-c][1,2]thiazine 2,2-dioxide ( 5 ), methyl 2-[[1-methyl-2,2-dioxido-7-(trifluoromethyl)-1H-pyrido[2,3-c][1,2]thiazin-4-yl]oxy]propanoate ( 6 ), 1,3,3-trimethyl-7-(trifluoromethyl)-1H-pyrido[2,3-c][1,2]thiazin-4(3H)-one 2,2-dioxide ( 7 ), 4-hydroxy-1-methyl-7-(trifluoromethyl)-N-[3-(trifluoromethyl)phenyl]-1H-pyrido[2,3-c][1,2]thiazine-3-carboxamide 2,2-dioxide ( 8 ), 4-hydroxy-1-methyl-7-(trifluoromethyl)-N-phenyl-1H-pyrido[2,3-c][1,2]thiazine-3-carboxamide 2,2-dioxide ( 9 ) and N-[2,4-dichloro-5-(2-propynyloxy)phenyl]-4-hydroxy-1-methyl-7-(trifluoromethyl)-1H-pyrido[2,3-c][1,2] thiazine-3-carboxamide 2,2-dioxide ( 10 ).     

Triazolo[4′,3′:4,5] [1,3,4]thiadiazolo[2,3-b]quinazolin-6-one

3-Methyl-6H-[1,2,4]triazolo[4′,3′: 4,5] [1,3,4]thiadiazolo[2,3-b]quinazolin-6-one (6) has been synthesized by the condensation of isatoic anhydride (1) with 4-amino-5-mercapto-3-methyl-[1,2,4]triazole (2) and final cyclisation of the intermediate3 with POCl₃ and PCl₃. Alternatively6 could also be synthesized by the condensation of 3-amino-2-mercapto-3H-quinazolin-4-one (7) withN-carbethoxy hydrazine in presence of hydrochloric acid and final cyclisation of the intermediate8 with acetic acid. The structures have been confirmed on the basis of IR, PMR and analytical results.     

A new platform for NCN dimethylamino pincer complexes: Synthesis and structural studies

The reaction of 2,6-(2-{Me₂NCH₂}C₆H₄)₂C₆H₃I (2) with Pd₂(dba)₃ produced the NCN diamine pincer complex [2,6-(2-Me₂{NCH₂}C₆H₄)₂C₆H₃PdI] (3) by an oxidative addition route. The structural analysis of ligand precursor 2 revealed a syn-conformation in the solid state. Single crystal X-ray analysis of complex 3 revealed a conventional square planar geometry about the palladium center and a global C₂ symmetric structure. Variable temperature and concentration NMR spectroscopic studies of complex 3 suggest an equilibrium between 3 and the dinuclear species [{2,6-(2-{Me₂NCH₂}C₆H₄)₂C₆H₃Pd}₂μ²-I]I in CDCl₃ solution. An unusual carbonate complex [{2,6-(2-{Me₂NCH₂}C₆H₄)₂C₆H₃Pd}₃μ³-CO₃]I₃ (4) was also structurally characterized as a minor product during synthesis of 3.     

Formation of carbon-carbon bonds between activated alkynes and diimine ligands in the aluminum complexes

The gallium and aluminum complexes containing the redox-active ligand (dpp-bian)Ga-Ga(dpp-bian) (1), (dpp-bian)Al-Al(dpp-bian) (2), or (dpp-bian)AlI(Et₂O) (3) (dpp-bian is 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene) react with alkyl butynoates Me-C≡C-CO₂R (R = Me, Et) to form C-C bonds between the dpp-bian ligand and alkyne. The reaction of complex 1 with methyl 2-butynoate and 4-chloroaniline in a molar ratio of 1: 2: 2 affords 7-(2,6-diisopropylphenyl)-10-methylacenaphtho[1,2-b]pyridin-8(7H)-one (4) containing no gallium. In the reaction of complex 2 with methyl 2-butynoate, alkyne is inserted into the skeleton of the dpp-bian ligand to form 4-(dpp-AIE)-9-(2,6-diisopropylphenyl)-8-(1,3-dpp-2MBIDP)-3,7-dimethoxy-1,5-dialuma-9-aza-2,6-dioxabicyclo[3.3.1]nonadiene-3,7 (5) (dpp-AIE is 1-[2-(2,6-diisopropylphenylimino)acenaphthen-1(2H)-ylidene]ethyl; 1,3-dpp-2MBIDP is 1,3-bis(2,6-diisopropylphenylimino)-2-methyl-2,3-dihydro-1H-phenalen-2-yl). The reactions of complex 3 with methyl and ethyl 2-butynoates afford dimeric derivatives [-OC(OR)=C(2,3-dpp-1MBIDP)Al(I)-]₂ (2,3-dpp-1MBIDP is 2,3-bis(2,6-diisopropylphenylimino)-1-methyl-2,3-dihydro-1H-phenalen-2-yl; R = Me (6), Et (7)). The reaction of complex 3 with methyl 2-butynoate gives the product isomeric to compound 6: [-OC(OCH₃)=C(1,3-dpp-2MBIDP)Al(I)-]₂ (8), which cleaves THF resulting in complex [-OC(OCH₃)=C(1,3-dpp-2MBIDP)Al(OC₄H₈I)-]₂ (9). Complex (dpp-bian)Al(acac) (10), obtained by the reduction of dpp-bian with aluminum in the presence of Al(acac)₃ in diethyl ether at ambient temperature, is inert towards acetylene, phenylacetylene, and alkyl butynoates. Compounds 4–7 and 10 were characterized using IR spectroscopy, and compounds 4, 7, and 10 were additionally characterized by ¹H NMR spectroscopy. The structures of compounds 4–7, 9, and 10 were determined by X-ray diffraction analysis.     

Reactions of 4-acyl-1-alkoxyaryl-5-aryl-3-hydroxy-2,5-dihydro-1H-pyrrol-2-ones with nucleophilic reagents

4-Acetyl-1-alkoxyaryl-5-aryl-3-hydroxy-2,5-dihydro-1H-pyrrol-2-ones reacted with amines to give 1-alkoxyaryl-5-aryl-4-(1-R-aminoethylidene)pyrrolidine-2,3-diones. Reactions of amines with 4-benzoyl-substituted analogs involve nucleophilic attack on the C³ atom in the heteroring to produce the corresponding 3-R-amino-1-alkoxyaryl-5-aryl-4-benzoyl-2,5-dihydro-1H-pyrrol-2-ones. Reactions of the title compounds with hydrazine hydrate, regardless on the substituent on C₄, afforded 4-aryl-3-methyl(phenyl)-5-[2(4)-methoxyphenyl]-4,6-dihydropyrrolo[3,4-c]pyrazol-6-ones.     

A new pyrrolidine-derived atropisomeric amino alcohol as a highly efficient chiral ligand for the asymmetric addition of diethylzinc to aldehydes

A highly efficient pyrrolidine-derived atropisomeric amino alcohol, (S_a)-1-[2-diphenylhydroxymethyl-6-(trifluoromethyl)phenyl]-2-(1-pyrrolido)methyl-1H-pyrrole, has been synthesized as a chiral ligand for the enantioselective addition of diethylzinc to some prochiral aldehydes to afford (S)-alcohols. The conversion rates were close to quantitative with good to excellent enantiomeric excesses (up to 95% ee).     

Synthesis of an acyclic nucleoside analog of highly fluorescent luminarosine

Photoirradiation of 1-{9-[(2-acetoxyethoxy)methyl]-9H-purin-6-yl}-pyridinium chloride (1b) in aqueous solution leads to two photoproducts, namely 1-{5-formamido-6-[(2-acetoxyethoxy)methylamino]pyrimidin-4-yl}pyridinium chloride (2b) and 1-(6-(acetoxymethyl)-5,5a,6,8-tetrahydrooxazolo[4,3-e]purin-4-yl)pyridinium chloride (6), which constitutes a new heterocyclic system. Further, photosensitized irradiation of 2b gave the desired acyclic nucleoside analog of the highly fluorescent luminarosine 3b.     

4-Trichloroacetyl-1,2,3-triazoles: A versatile building block for rapid assessment of carbohydrazides and rufinamide derivatives

This work reports the synthesis of a series of (1H-1,2,3-triazol-4-yl)carbohydrazides (2), which were obtained from 4-trichloroacetyl-1H-1,2,3-triazoles (1). Triazoles 1 were synthesized by 1,3-dipolar cycloaddition reaction, starting from 4-alkoxy-1,1,1-trichloroalk-3-en-2-ones and benzyl azides and easily (15 min) converted to 2 by reaction with hydrazine hydrate (73–82% yield). Carbohydrazides 2 proved to be a versatile building block for constructing a series of fluorinated heterocycles analogous to rufinamide, i.e., 1H-1,2,3-triazol-4-yl-1,3,4-oxadiazoles, a pyrrole derivative, and a 2-pyrazoline, through [4+1]–, [1+4]–, and [3+2]–cyclocondensation reactions, respectively. Finally, and according to the Lipinski’s rule of five, 2,6-difluorobenzylated 1,2,3-triazoles can be considered as potential candidates for further biological activity assays.     

Synthesis and reaction chemistry of 4-nitrile-substituted NCN-pincer palladium(II) and platinum(II) complexes (NCN = [NC-4-C6H2(CH2NMe2)2-2,6])

Nitrile-functionalized NCN-pincer complexes of type [MBr(NC-4-C₆H₂(CH₂NMe₂)₂-2,6)] (6a, M = Pd; 6b, M = Pt) (NCN = [C₆H₂(CH₂NMe₂)₂-2,6]⁻) are accessible by the reaction of Br-1-NC-4-C₆H₂(CH₂NMe₂)₂-2,6 (2b) with [Pd₂(dba)₃ · CHCl₃] (5a) (dba = dibenzylidene acetone) and [Pt(tol-4)₂(SEt₂)]₂ (5b) (tol = tolyl), respectively. Complex 6b could successfully be converted to the linear coordination polymer {[Pt(NC-4-C₆H₂(CH₂NMe₂)₂-2,6)](ClO₄)}_n (8) upon its reaction with the organometallic heterobimetallic π-tweezer compound {[Ti](μ-σ,π-CCSiMe₃)₂}AgOClO₃ (7) ([Ti] = (η⁵-C₅H₄SiMe₃)₂Ti).The structures of 6a (M = Pd) and 6b (M = Pt) in the solid state are reported. In both complexes the d⁸-configurated transition metal ions palladium(II) and platinum(II) possess a somewhat distorted square-planar coordination sphere. Coordination number 4 at the group-10 metal atoms M is reached by the coordination of two ortho-substituents Me₂NCH₂, the NCN ipso-carbon atom and the bromide ligand. The NC group is para-positioned with respect to M.