On the physical properties of Sr1−xNaxRuO3 (x = 0–0.19)

The metallic ferromagnetic perovskite-type SrRuO₃ (T_C ～ 160 K) belongs to the “class” of materials with strongly correlated electrons. Nonetheless a simple ferromagnetism associated with isotropic interactions of low spin Ru⁴⁺ ions local moments is far too simple to explain the complex interplay between charge carriers and magnetic interactions. In that sense the suppression of ferromagnetism in isoelectronic Sr_1?xCa_xRuO₃ was tentatively associated to the increased lattice distortion influencing primarily the 4d Ru bandwidths and, hence, the itinerancy and respective populations of the spin-up and spin-down electrons.In order to probe the robustness of the metallic ferromagnetism against electron occupation of 4d Ru orbital we prepared and characterized polycrystalline Sr_1?xNa_xRuO₃ (x = 0.0–0.19) ceramics. The substitution of Sr²⁺ by Na¹⁺, leading to formally mixed valence Ru⁴⁺/Ru⁵⁺, induces the decrease of the Curie temperature and spin-wave stiffness, which was determined independently from magnetic and specific heat data. On the other hand the effective paramagnetic moment remains essentially unchanged. All compounds are metallic in a sense of electrical resistivity and thermopower temperature dependence; the low temperature upturn of the electrical resistivity was explained on a base of the weak localization. The metallic nature of the samples is corroborated by Pauli paramagnetism and high Sommerfeld coefficient γ, extracted from the low temperature specific heat, which increases from 30.9 mJ mol^?1 K^?2 (x = 0.0) to 43.0 mJ mol^?1 K^?2 (x = 0.19).     

Hopping conduction in double layered La2−2xCa1+2xMn2O7 manganite

Double layered La_2−2xCa_1+2xMn₂O₇ manganite has been synthesized using solid state reaction method for different dopant concentration x = 0.0–0.5. Their temperature dependence of resistivity (ρ − T) has been studied in the semiconducting region. The experimental observations were compared with the theoretically simulated temperature dependence of resistivity curves based on nearest neighbour hopping, Efros–Shklovskii variable range hopping, and Mott's 2D and 3D variable range hopping models. From the analysis of these results, Mott's 3D variable range hopping mechanism seemed to be most suitable mechanism describing the semiconducting behaviour of these double layered manganites. Temperature dependent activation energy also supported the Mott's 3D variable range hopping model. The Mott's activation energy was found to vary with the dopant concentration x and it showed a minimum value for x = 0.3.     

Redox behavior and transport properties of La0.5−2xCexSr0.5+xFeO3−δ and La0.5−2ySr0.5+2yFe1−yNbyO3−δ perovskites

The effects of doping the mixed-conducting (La,Sr)FeO_3−δ system with Ce and Nb have been examined for the solid-solution series, La_0.5−2xCe_xSr_0.5+xFeO_3−δ (x = 0–0.20) and La_0.5−2ySr_0.5+2yFe_1−yNb_yO_3−δ (y = 0.05–0.10). Mössbauer spectroscopy at 4.1 and 297 K showed that Ce⁴⁺ and Nb⁵⁺ incorporation suppresses delocalization of p-type electronic charge carriers, whilst oxygen nonstoichiometry of the Ce-containing materials increases. Similar behavior was observed for La_0.3Sr_0.7Fe_0.90Nb_0.10O_3−δ at 923–1223 K by coulometric titration and thermogravimetry. High-temperature transport properties were studied with Faradaic efficiency (FE), oxygen-permeation, thermopower and total-conductivity measurements in the oxygen partial pressure range 10⁻⁵–0.5 atm. The hole conductivity is lower for the Ce- and Nb-containing perovskites, primarily as a result of the lower Fe⁴⁺ concentration. Both dopants decrease oxide-ion conductivity but the effect of Nb-doping on ionic transport is moderate and ion-transference numbers are higher with respect to the Nb-free parent phase, 2.2 × 10⁻³ for La_0.3Sr_0.7Fe_0.9Nb_0.1O_3−δ cf. 1.3 × 10⁻³ for La_0.5Sr_0.5FeO_3−δ at 1223 K and atmospheric oxygen pressure. The average thermal expansion coefficients calculated from dilatometric data decrease on doping, varying in the range (19.0–21.2) × 10⁻⁶ K⁻¹ at 780–1080 K.     

Double perovskite Sr2FeMoO6−xNx (x=0.3, 1.0) oxynitrides with anionic ordering

Two new oxynitride double perovskites of composition Sr₂FeMoO_6?xN_x (x=0.3, 1.0) have been synthesized by annealing precursor powders obtained by citrate techniques in flowing ammonia at 750 °C and 650 °C, respectively. The polycrystalline samples have been characterized by chemical analysis, x-ray and neutron diffraction (NPD), Mössbauer spectroscopy and magnetic measurements. They exhibit a tetragonal structure with a=5.5959(1) Å, c=7.9024(2) Å, V=247.46(2) Å³ for Sr₂FeMoO_5.7N_0.3; and a=5.6202(2) Å, c=7.9102(4) Å, V=249.85(2) Å³ for Sr₂FeMoO₅N; space group I4/m, Z=2. The nitridation process seems to extraordinarily improve the long-range Fe/Mo ordering, achieving 95% at moderate temperatures of 750 °C. The analysis of high resolution NPD data, based on the contrast existing between the scattering lengths of O and N, shows that both atoms are located at (O,N)2 anion substructure corresponding to the basal ab plane of the perovskite structure, whereas the O1 site is fully occupied by oxygen atoms. The evolution of the 〈Fe–O〉 and 〈Mo–O〉 distances suggests a shift towards a configuration close to Fe⁴⁺(3d⁴, S=2):Mo⁵⁺(4d¹, S=1/2). The magnetic susceptibility shows a ferrimagnetic transition with a reduced saturation magnetization compared to Sr₂FeMoO₆, due to the different nature of the magnetic double exchange interactions through Fe–N–Mo–N–Fe paths in contrast to the stronger Fe–O–Mo–O–Fe interactions. Also, the effect observed by low-temperature NPD seems to reduce the ordered Fe moments and enhance the Mo moments, in agreement with the evolution of the oxidation states, thus decreasing the saturation magnetization.     

Photo-luminescence studies of strontium barium niobate crystals doped with Cr3+ ions

This paper reports the photo-luminescence spectroscopic results of Strontium–Barium–Niobate, Sr_x,Ba_1−xNb₂O₅ (SBN, x = 0.61 for near congruent composition) crystals doped with Cr₂O, at cryogenic temperature (20 K). The experimental results reveal the need of re-assignment of the Cr³⁺ ions defect centres in this material. For first time, a broad emission band in the near infrared region centred at ca. 950 nm is reported. This emission band has micro-seconds decaytime constant and a FWHM band-width > 1700 cm⁻¹ and has been ascribed to the vibronically assisted ⁴T₂ → ⁴A₂ transition. A much narrower emission band centred at ca. 764 nm with milli-seconds decaytime constant and a FWHM band-width of ca. 170 cm⁻¹ is correlated to the ²E → ⁴A₂ radiative transition (R-line).     

Electrode properties of Sr doped La2CuO4 as new cathode material for intermediate-temperature SOFCs

High performance La_2−xSr_xCuO_4−δ (x = 0.1, 0.3, 0.5) cathode materials for intermediate temperature solid oxide fuel cell (IT-SOFCs) were prepared and characterized. The investigation of electrical properties indicated that La_1.7Sr_0.3CuO₄ cathode has low area specific resistance (ASR) of 0.16 Ω cm² at 700 °C and 1.2 Ω cm² at 500 °C in air. The rate-limiting step for oxygen reduction reaction on La_1.7Sr_0.3CuO₄ electrode changed with oxygen partial pressure and measurement temperature. La_1.7Sr_0.3CuO₄ cathode exhibits the lowest overpotential of about 100 mV at a current density of 150 mA cm⁻² at 700 °C in air.     

Real structure of SrSi2O2N2

SrSi₂O₂N₂ is an important host lattice for Eu²⁺ doped phosphors. Its crystal structure (space group P1, a = 7.0802(2) Å, b = 7.2306(2) Å, c = 7.2554(2) Å, α = 88.767(3)°, β = 84.733(2)°, γ = 75.905(2)° and V = 358.73(2) Å³, Z = 4) is isotypic with EuSi₂O₂N₂: highly condensed silicate layers are separated by Sr²⁺. The samples are characterized by pronounced real structure effects owing to pseudosymmetry of partial structures. Polysynthetic twinning with domains of various sizes is ubiquitous and oriented intergrowth of domains with different orientations has also been observed and analysed in detail by means of electron diffraction and high-resolution electron microscopy. These effects also affect the X-ray powder pattern and were taken into account in a Rietveld refinement.     

A Raman scattering study of structural changes in LaMn1−xCoxO3+δ system

We present results of Raman scattering studies on LaMn_1−xCo_xO_3+δ over a wide range of doping content (x = 0.1–0.75) and temperature range of 20–300 K. Powder X-ray diffraction patterns show that there is a structural change from orthorhombic to rhombohedral at x = 0.5 as x increases. Raman spectra of all LaMn_1−xCo_xO_3+δ samples show peaks near 260, 500, and 650 cm⁻¹. However, the Raman spectra are not drastically different from each other across the structural phase transition at x = 0.5. On the other hand, the peak frequencies of the modes near 260 and 500 cm⁻¹ as functions of Co content (x) show slope changes at x = 0.5. The full-width at the half-maximum (FWHM) of the mode near 650 cm⁻¹ as a function of Co content (x) shows minimum at x = 0.5. Normally, larger values of FWHM are expected at near x = 0.5, if the mode were affected by the structural disorder at the phase boundary. Therefore, it is likely due to lowest charge concentration at x = 0.5, which results in lowest screening effect. This is consistent with the fact that the intensity of the phonons is strongest at x = 0.5. As the temperature decreases, the two peaks near 500 and 650 cm⁻¹ of different Co contents, related with octahedral distortions, are found to shift to lower frequencies unlike the usual temperature behavior. However, no abrupt change in the peak frequencies and the FWHM is observed across measured temperature range, regardless of the Co content.     

Structural and spectroscopic investigations on Eu3+-doped alkali fluoroborate glasses

Eu³⁺-doped alkali fluoroborate glasses B₂O₃–XCO₃–NaF–Eu₂O₃ (where X = Li₂, Na₂, K₂, and Ca, Mg) have been prepared using the conventional melting technique and their structural and optical properties have been evaluated. The XRD pattern of the glasses confirmed the amorphous nature and the FTIR spectra reveal the presence of BO₃ and BO₄ units as their local structures along with the strong OH^? groups. From the absorption spectra the bonding parameters have been calculated and confirmed that the Eu–O bonds in the studied glasses are of covalent nature. Judd–Ofelt (JO) analysis has been carried out from the emission spectra. The JO parameters have been used to calculate transition probabilities (A), lifetime (τ_R) and branching ratios (β_R) and peak stimulated emission cross-section (σ_P^E) for the ⁵D₀ → ⁷F_J (J = 1, 2, 3 and 4) transitions of the Eu³⁺ ions. The decay from the ⁵D₀ level of Eu³⁺ ions in the title glasses has been measured and analysed. The lifetime of the ⁵D₀ level is found to be shorter than the reported glasses which may be due to the presence of OH^? groups.     

Measurements of the critical parameters for {xNH3 + (1 − x)H2O} with x = (0.9098, 0.7757, 0.6808)

Measurements of the critical parameters for {xNH₃ + (1 ? x)H₂O} with x = (0.9098, 0.7757, 0.6808) were carried out by using a metal-bellows variable volumometer with an optical cell. The expanded uncertainties (k = 2) in temperature, pressure, density, and composition measurements have been estimated to be less than 3.2 mK, 3.2 kPa, 0.3 kg · m^?3, and 8.8 · 10^?4, respectively. In each mole fraction, the critical temperature T_c was first determined on the basis of the intensity of the critical opalescence. The critical pressure p_c and critical density ρ_c were then determined as the point at which the meniscus disappears on the isotherm at T = T_c. The expanded uncertainties (k = 2) in the present critical parameters have also been estimated. Comparisons of the present values with the literature data as well as the calculated values afforded using the equation of state are also presented.     

Synthesis,characterization and properties of microporous lanthanide silicates: K8Ln3Si12O32NO3·H2O (Ln = Eu,Tb, Gd,Sm)

A family of microporous lanthanide silicates, K₈Ln₃Si₁₂O₃₂NO₃·H₂O (denoted LnSiO-CJ3, Ln = Eu, Tb, Gd, Sm), was synthesized under mild hydrothermal conditions at 503 K. The X-ray powder diffraction patterns of these compounds reveal that they are isostructural. The structure of EuSiO-CJ3 was determined by single-crystal X-ray diffraction analysis. It crystallizes in triclinic space group P-1 (No. 2) with a = 11.599(2) Å, b = 12.225(2) Å, c = 13.829(3) Å, α = 112.99(3)°, β = 92.05(3)°, γ = 90.57(3)°. The structure is based on [Si₃O₈]_n^4n? layers with 6-, 8-, 12-rings that are connected by EuO₆ octahedra to form a 3-D framework with 8-ring channels along the [001] direction. Charge neutrality is achieved by the K⁺ and NO₃^? ions located in the channels. The framework of EuSiO-CJ3 shows good thermal stability, which can be stable up to 1273 K. Ion-exchange capacity of EuSiO-CJ3 was investigated by the exchange of NO₃^? ions with halide ions (F^?, Cl^?, Br^?). The peaks in the emission spectra of LnSiO-CJ3 (Ln = Eu, Tb) belong to the characteristic transitions of Ln³⁺ (Ln = Eu, Tb) respectively. The lifetime measurements of LnSiO-CJ3 (Ln = Eu, Tb) suggest the presence of three Ln³⁺ (Ln = Eu, Tb) environments, which are consistent with the crystallographic results.     

New iodate materials as potential laser matrices. Preparation and characterisation of α-M(IO3)3 (M = Y,Dy) and β-M(IO3)3 (M = Y,Ce, Pr,Nd, Eu,Gd, Tb,Dy, Ho,Er). Structural evolution as a function of the Ln3+ cationic radius

Anhydrous yttrium iodate presents polymorphism; two crystalline phases are obtained under hydrothermal conditions. α-Y(IO₃)₃ crystallises in the monoclinic space-group P2₁/c with a three-dimensional structure, whereas β-Y(IO₃)₃ crystallises in the monoclinic space-group P2₁/n with a two-dimensional structure. The lattice parameters are a = 7.038(1) Å, b = 8.466(1) Å, c = 13.317(1) Å, β = 99.65(1)°, V = 782.3(2) Å³, Z = 4 for α-Y(IO₃)₃ and a = 8.685(1) Å, b = 5.964(1) Å, c = 14.958(1) Å, β = 96.99(2)°, V = 769.0(2) Å³, Z = 4 for β-Y(IO₃)₃. The α-form is isostructural with α-Dy(IO₃)₃ studied in this work and α-Ln(IO₃)₃ (Ln = Ce, Pr, Nd, Sm, Eu, Gd, Tb, Ho, Er, Tm, Yb, and Lu) already studied. The β-form is isostructural with β-Ln(IO₃)₃ (Ln = Ce, Pr, Nd, Eu, Gd, Tb, Dy, Ho and Er) studied in this work. The structural evolutions as a function of the Ln³⁺ cationic radius are studied. α-Y(IO₃)₃ and β-Y(IO₃)₃ present good thermal stability since they decompose at 600 °C. They are transparent up to 11.5 μm and they have good optical damage thresholds on powder.     

Perovskite-type oxides for high-temperature oxygen separation membranes

Oxygen permeation through dense ceramic membranes of perovskite-like SrCo_0.9−xFe_0.1Cr_xO_3−δ (x = 0.01–0.05), Sr_1−x−yLn_xCoO_3−δ(Ln = La, Nd, Sm, Gd; x = 0.30–0.35; y = 0–0.10), SrCo_1−xTi_xO_3−δ (x = 0.05–0.20) and LaM_1−xNi_xO_3−δ (M = Ga, Co, Fe; x = 0–0.6) was studied. The SrCoO_3−δ-based solid solutions with cubic perovskite structure were found to exhibit highest permeation fluxes compared to other membranes. However, high thermal expansion coefficients and interaction with gas species such as carbon dioxide may complicate the employment of SrCoO_3−δ membranes for oxygen separation membranes. Alternatively, the LaGa_1−xNi_xO_3−δ (x = 0.2–0.5) perovskites, having significant permeation fluxes as well as thermal expansion coefficients in the range of (10.8–11.6) × 10⁻⁶ K⁻¹, were demonstrated to be suitable as membrane materials at oxygen pressures from 1 × 10⁻² to 2 × 10⁴ Pa. Testing oxygen permeation at oxygen partial pressures of 1–60 atm showed that only oxides with a high oxygen deficiency such as SrCo_0.85Ti_0.15F_3−δ possess sufficient oxygen permeation fluxes. The oxygen permeability of perovskites on the basis of LaGaO₃ and LaCoO_3−δ was found to be negligible at oxygen pressures above 15 atm, caused by low oxygen vacancy concentration and ionic conductivity of such ceramic materials.     

Li6B18(Li2O)x – A boride with a porous framework of B6 octahedra

The synthesis and crystal structure of the red transparent lithium boride Li₆B₁₈(Li₂O)_x (0 < x ≤ 1) is reported. The lattice constants are a = 8.21708(17) Å and c = 4.15893(16) Å for x = 0.26 (powder data), a = 8.223(4) Å and c = 4.160(2) Å for x = 0.7 (single crystal data), a = 8.21179(16) Å and c = 4.14485(13) Å for x = 0.9 (powder data). The compound crystallizes in the space group P6/mmm (no. 191). The crystal structure consists of B₆ octahedra forming a 3-dimensional network with large open channels. This compound has remarkable topological similarities with hexagonal tungsten bronzes and zeolites and is only formed, when a template is present during the synthesis.     

EPR and optical absorption studies of Cu2+ doped bis (glycinato) Mg (II) monohydrate single crystals

Electron paramagnetic resonance (EPR) study of Cu²⁺ doped bis (glycinato) Mg (II) monohydrate single crystals is carried out at room temperature. Copper enters the lattice substitutionally and is trapped at two magnetically inequivalent sites. The observed spectra are fitted to a spin-Hamiltonian of rhombic symmetry with the following values of the parameters: Cu²⁺ (I), g_x = 2.1577 ± 0.0002, g_y = 2.2018 ± 0.0002, g_z = 2.3259 ± 0.0002, A_x = (87 ± 2) × 10^?4 cm^?1, A_y = (107 ± 2) × 10^?4 cm^?1, A_z = (141 ± 2) × 10^?4 cm^?1; Cu ²⁺ (II), g_x = 2.1108 ± 0.0002, g_y = 2.1622 ± 0.0002, g_z = 2.2971 ± 0.0002, A_x = (69 ± 2) × 10^?4 cm^?1, A_y = (117 ± 2) × 10^?4 cm^?1and A_z = (134 ± 2) × 10^?4 cm^?1. The ground state wave function of the Cu²⁺ ion in this lattice is evaluated to be predominantly |x² ? y². The g-factor anisotropy is also calculated and compared with the experimental value. With the help of the optical absorption study, the nature of bonding in the complex is discussed.     

Crystal growth and magnetic properties of the new iridates Ln1−xNa1+xIrO4 (Ln = Gd–Er,Y; x = 0.04–0.25)

We report the single crystal structures and magnetic properties of a series of lanthanide-containing iridates, Ln_1−xNa_1+xIrO₄ (Ln = Gd–Er, Y; x = 0.04–0.26) grown from a mixed sodium and cesium hydroxide flux. The compounds crystallize in the hexagonal space group P-62m (#189) with lattice parameters ranging from a = 9.3872(2)–9.4596(3) Å and c = 3.1512(1)–3.2030(2) Å and are structurally related to other iridium oxides. The oxidation state of iridium ranges from +4.08 (Gd) to +4.50 (Er). Magnetic susceptibility measurements reveal the existence of antiferromagnetic correlations below 15 K.     

Mixed valence states of Cr and Fe in La1−xSrxFe0.8Cr0.2O3−y

The La_1?xSr_xFe_0.8Cr_0.2O_3?y (x = 0.2, 0.4, 0.6 and 0.8) phases were studied by X-ray photoelectron spectroscopy at room temperature and ⁵⁷Fe Mössbauer spectroscopy at different temperatures. Mixed valence states were observed both for chromium and iron ions, justifying the complex magnetic behaviour exhibited by these compounds. The Mössbauer results indicate the simultaneous presence of Fe³⁺, Fe⁴⁺ and Fe⁵⁺ at 4.2 K and the co-existence of Fe³⁺ and Fe⁽³⁺ⁿ⁾⁺ at T = 293 K, with the latter fraction increasing with increasing strontium content. The presence of Cr^3+/4+ is interpreted as being mainly responsible for the incomplete charge disproportionation reaction of iron at low temperature, as deduced from the Mössbauer results.     

Microstructures and electrochemical hydrogen storage properties of novel Mg–Al–Ni amorphous composites

The amorphous Mg–Al–Ni composites were prepared by mechanical ball-milling of Mg₁₇Al₁₂ with x wt.% Ni (x = 0, 50, 100, 150, 200). The effects of Ni addition and ball-milling parameters on the electrochemical hydrogen storage properties and microstructures of the prepared composites have been investigated systematically. For the Mg₁₇Al₁₂ ball-milled without Ni powder, its particle size decreases but the crystal structure does not change even the ball-milling time extending to 120 h, and its discharge capacity is less than 15 mAh g^?1. The Ni addition is advantageous for the formation of Mg–Al–Ni amorphous structure and for the improvement of the electrochemical characteristics of the composites. With the Ni content x increasing, the composites exhibit higher degree of amorphorization. Moreover, the discharge capacity of the composite increases from 41.3 mAh g^?1 (x = 50) to 658.2 mAh g^?1 (x = 200) gradually, and the exchange current density I₀ increases from 67.1 mA g^?1 (x = 50) to 263.8 mA g^?1 (x = 200), which is consistent with the variation of high-rate dischargeability (HRD). The ball-milled Mg₁₇Al₁₂ + 200 wt.% Ni composite has the highest cycling discharge capacity in the first 50 cycles.