Synthesis of Co3O4 nanostructures using a solvothermal approach

The controlled synthesis of Co₃O₄ nanostructures with morphologies of micro-spheres, nanobelts, and nanoplates was successfully achieved by a simple solvothermal method. Various comparison experiments showed that several experimental parameters, such as the reaction temperature and the concentration of NH₃·H₂O, play important roles in the morphological control of Co₃O₄ nanostructures. A lower temperature and a lower concentration of NH₃·H₂O favor spherical products with a diameter of 1–1.5 μm, whereas a higher temperature and a higher concentration of NH₃·H₂O generally lead to the formation of nanobelts with a width of 20–150 nm. In addition, Co₃O₄ hexagonal nanoplates with an edge length of about 200–300 nm are also obtained by adding surfactant CTAB. A rational mechanism is proposed for the selective formation of various morphologies. X-ray powder diffraction (XRD), transmission electron microscopy (TEM), selected-area electron diffraction (SAED), and field-emission scanning electron microscope (FE-SEM) were used to characterize the products.     

Removal of arsenic from aqueous solution: A study of the effects of pH and interfering ions using iron oxide nanomaterials

Nanophase Fe₃O₄ and Fe₂O₃ were synthesized through a precipitation method and were utilized for the removal of either arsenic (III) or (V) from aqueous solution as a possible method for drinking water treatment. The synthesized nanoparticles were characterized using X-ray diffraction, which showed that the Fe₃O₄ and the Fe₂O₃ nanoparticles had crystal structures of magnetite and hematite, respectively. In addition, Secherrer's equation was used to determine that the grain size nanoparticles were 12 ± 1.0 nm and 17 ± 0.5 nm for the Fe₂O₃ and Fe₃O₄, respectively. Under a 1 h contact time, batch pH experiments were performed to determine the optimum pH for binding using 300 ppb of either As(III) or (V) and 10 mg of either Fe₃O₄ or Fe₂O₃. The binding was observed to be pH independent from pH 6 through pH 9 and a significant drop in the binding was observed at pH 10. Furthermore, batch isotherm studies were performed using the Fe₂O₃ and Fe₃O₄ to determine the binding capacity of As(III) and As(V) to the iron oxide nanomaterials. The binding was found to follow the Langmuir isotherm and the capacities (mg/kg) of 1250 (Fe₂O₃) and 8196 (Fe₃O₄) for As(III) as well as 20,000 (Fe₂O₃) and 5680 (Fe₃O₄) for As(III), at 1 and 24 h of contact time, respectively. The As(V) capacities were determined to be 4600 (Fe₂O₃), 6711(Fe₃O₄), 4904 (Fe₂O₃), and 4780 (Fe₃O₄) mg/kg for nanomaterials at contact times of 1 and 24 h respectively.     

Lithium storage in hollow spherical ZnFe2O4 as anode materials for lithium ion batteries

Hollow microspheres composed of phase-pure ZnFe₂O₄ nanoparticles (hierarchically structured) have been prepared by hydrothermal reaction. The unique hollow spherical structure significantly increases the specific capacity and improves capacity retention of this material. The product of each phase transition during initial discharge (ZnFe₂O₄ ? Li_0.5ZnFe₂O₄ ? Li₂ZnFe₂O₄ → Li₂O + Li–Zn + Fe) and their structural reversibility are recognized by X-ray diffraction and electrochemical characterization. The products of the deeply discharged (Li–Zn alloy and Fe) and recharged materials (Fe₂O₃) were clarified based on high resolution transmission electron microscopic technique and first-principle calculations.     

Magnetically recyclable Schiff-based palladium nanocatalyst [Fe3O4@SiNSB-Pd] and its catalytic applications in Heck reaction

A magnetically separable palladium nanocatalyst has been synthesized through the immobilization of palladium onto 3-aminopropylphenanthroline Schiff based functionalized silica coated superparamagnetic Fe₃O₄ nanoparticles. The nanocatalyst (Fe₃O₄@SiNSB-Pd) was fully characterized using several spectroscopic techniques, such as FT-IR, HR-SEM, TEM, XRD, ICP, and XPS. The microscopic image of Fe₃O₄ showed spherical shape morphology and had an average size of 150 nm. The Pd-nanoparticles exhibited an average size 3.5 ± 0.6 nm. The successful functionalization of Fe₃O₄@SiNSB-Pd was identified by FT-IR spectroscopy and the appearance of palladium species in Fe₃O₄@SiNSB-Pd was confirmed by XRD analysis. While XPS has been utilized for the determination of the chemical oxidation state of palladium species in Fe₃O₄@SiNSB-Pd. Several activated and deactivated arene halides and olefines were employed for Mizoroki-Heck cross-coupling reactions in the presence of Fe₃O₄@SiNSB-Pd, each of which produced the respective cross-coupling products with excellent yields. The Fe₃O₄@SiNSB-Pd shows good reactivity and reusability for up to seven consecutive cycles.     

Fabrication and properties of Mn0.5Zn0.5Fe2O4 nanofibers

Zn-doped α-FeOOH nanofiber was synthesized by coprecipitation method. Then the α-FeOOH was enwraped by the complex of the Mn²⁺ and citric acid. The morphology of α-FeOOH did not transform after the calcination process and Mn_0.5Zn_0.5Fe₂O₄ nanofiber was successfully prepared. The phase, morphology, particle diameter and the magnetic properties of samples were studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). The results indicated that Mn_0.5Zn_0.5Fe₂O₄ nanofibers with an aspect ratio over 40 and a diameter of 20 nm were prepared. Compared with the amorphous Mn_0.5Zn_0.5Fe₂O₄, the anisotropy of the Mn_0.5Zn_0.5Fe₂O₄ nanofiber increased, resulting in the higher coercivity and magnetization of the obtained sample. With an increase in the calcination temperature, the diameter and the saturation magnetization of the sample increased, while the aspect ratio and coercivity decreased. The coercivity of the sample obtained at 700 °C was maximal (up to 185.4 Oe). The saturation magnetization of the sample obtained at 900 °C was maximal (up to 65.3 emu/g). The use of citric acid method prevented the presence of Mn(OH)₂, resulting in the decrease of the calcination temperature.     

In situ and one-step synthesis of hydrophobic zinc borate nanoplatelets

The polycrystalline and hydrophobic zinc borate (Zn₂B₆O₁₁·3H₂O) nanoplatelets were in situ successfully synthesized via one-step precipitation reaction in aqueous solution of Na₂B₄O₇·10H₂O and ZnSO₄·7H₂O with oleic acid as the modifying agent. The microstructures and morphology of the as-obtained samples were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) equipped with an energy-dispersive X-ray spectrometer (EDS), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). Measurements of the relative water contact angle and the active ratio indicated that Zn₂B₆O₁₁·3H₂O samples were hydrophobic. It had been found that the as-prepared materials displayed nanoplatelet morphology with average diameters 100–500 nm and thickness 30 ± 5 nm and the morphology and size of the samples were controlled effectively.     

Synthesis and characterization of Fe3O4@SiO2@poly-l-alanine,peptide brush–magnetic microspheres through NCA chemistry for drug delivery and enrichment of BSA

A novel Fe₃O₄@SiO₂@poly-l-alanine peptide brush–magnetic microsphere (PBMMs) was synthesized from amine-functionalized Fe₃O₄ through the surface-initiated polymerization of N-carboxyanhydrides. Two materials with different peptide lengths were obtained from different amounts of N-carboxyanhydrides. These materials were characterized by Fourier transform infrared, transmission electron microscopy, large-angle powder X-ray diffraction, vibrating sample magnetometer and elemental analysis. Furthermore, the loading and release behavior of ibuprofen and the enrichment of bovine serum albumin on the two materials were investigated and it was shown that the PBMMs have a maximum uptake amount of ibuprofen of 40.3 mg g⁻¹, and an enrichment of bovine serum albumin of 20.9 mg g⁻¹. These materials are promising candidates for targeted drug delivery and protein enrichment.     

Role of core diameter and silica content in photocatalytic activity of TiO2/SiO2/Fe3O4 composite

Magnetically separable TiO₂/SiO₂/Fe₃O₄ composites of different core (Fe₃O₄) diameters and silica contents have been prepared by sol–gel technique for both silica and titania coatings. Energy dispersive X-ray fluorescence (EDX), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), BET surface area analysis and scanning electron microscope (SEM) have been used for characterization of prepared samples. Photocatalytic activity of the prepared samples has been investigated by photodegradation of methyl orange. Obtained results have shown that 25–45 μm core diameter exhibits the maximum activity since it possesses a convenient surface area and light transmittance. Silica content has a significant effect on the activity of composite. Silica content of more than 10 wt% has reduced the catalyst activity because of the increase in particle diameter and reduction of surface area.     

Fabrication and electrochemical performance of nickel ferrite nanoparticles as anode material in lithium ion batteries

Nano-sized nickel ferrite (NiFe₂O₄) was prepared by hydrothermal method at low temperature. The crystalline phase, morphology and specific surface area (BET) of the resultant samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and nitrogen physical adsorption, respectively. The particle sizes of the resulting NiFe₂O₄ samples were in the range of 5–15 nm. The electrochemical performance of NiFe₂O₄ nanoparticles as the anodic material in lithium ion batteries was tested. It was found that the first discharge capacity of the anode made from NiFe₂O₄ nanoparticles could reach a very high value of 1314 mAh g⁻¹, while the discharge capacity decreased to 790.8 mAh g⁻¹ and 709.0 mAh g⁻¹ at a current density of 0.2 mA cm⁻² after 2 and 3 cycles, respectively. The BET surface area is up to 111.4 m² g⁻¹. The reaction mechanism between lithium and nickel ferrite was also discussed based on the results of cycle voltammetry (CV) experiments.     

Studies on Fe–Co spinel electrodes

FeCo₂O₄ spinel oxide pelleted electrodes were prepared from the respective powders, obtained by low-temperature coprecipitation method. X-ray diffraction studies suggest the coexistence of two spinel phases, with different a-cell parameters. The samples show semiconductor-type behaviour, in the range 530–340 K. The estimated activation energy for conduction is about 0.7 eV. These phases are stable, after being used as electrode materials, as the XRD and SEM/EDS results show. Cyclic voltammetry has been used to investigate the electrochemical behaviour of the FeCo₂O₄ electrodes in 1 mol dm⁻³ KOH aqueous solutions. The voltammetric data allowed finding out the redox reactions occurring at the electrode surface, namely Fe₃O₄·4H₂O/Fe(OH)₂ or Fe₃O₄/Fe₂O₃ and CoO₂/CoOOH by comparing the experimental results with those referred in the literature.     

Uniform In2S3 octahedron-built microspheres: Bioinspired synthesis and optical properties

Uniform In₂S₃ octahedron-built microspheres were synthesized by using a mild hydrothermal treatment in the presence of L-glutamic acid at 180 °C. The microsphere with an average size of 5 μm was composed of interconnected octahedrons with diameters in the range from 100 to 150 nm. The products were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and X-ray photoelectron spectroscopy (XPS). The synthesis of various hollow and solid sphere structures and flower structures was achieved using different amino acids. This is the first report on synthesizing In₂S₃ nanostructures using different amino acids to modulate the morphology of the final products. Primary photoluminescence studies on the prepared In₂S₃ microspheres show promising results.     

Tremella-like molybdenum dioxide consisting of nanosheets as an anode material for lithium ion battery

Tremella-like structured MoO₂ consisting of nanosheets was obtained via a Fe₂O₃-assisted hydrothermal reduction of MoO₃ in ethylenediamine aqueous solution. The as-prepared product was characterized and tested with scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV) and capacity measurement as anode material for lithium ion batteries. This structured MoO₂ shows very high reversible capacity (>600 mA h g⁻¹), good rate capability and cycling performance, presenting potential application as anode material for lithium ion batteries with high rate capability and high capacity.     

Single microparticle applied in magnetic-switchable electrochemistry

In this work we demonstrated the micromanipulation of a single magnetic microparticle (Fe₃O₄) modified with Prussian blue (PB) for use in magnetic-switchable electrochemistry. A single Fe₃O₄-PB microparticle with 120 μm was isolated in an electrochemical microcell (20 μL), in which a fine control of PB electrochemical process on carbon electrode (Ø = 4.0 mm) was obtained. For cyclic voltammetry, redox processes attributed to PB/PW (Prussian blue/Prussian white) one electron redox couple were observed, however the capacitive currents were very high. On the other hand, by using differential pulse voltammetry, a maximum faradaic current for anodic peak of 200 nA cm^− 2 at 0.06 V was observed. Several and high stable chronoamperograms were obtained by “switch on” and “switch off” magnetic commutative states for a single microparticle, showing that the system developed here can be very promising for application in electrochemistry.     

Structural and Mössbauer characterization of the ball milled Fex(Cr2O3)1−x system

The Fe_x(Cr₂O₃)_1?x system, with 0.10 ≤ X ≤ 0.80, was mechanically processed for 24 h in a high-energy ball-mill. In order to examine the possible formation of iron–chromium oxides and alloys, the milled samples were, later, thermally annealed in inert (argon) and reducing (hydrogen) atmospheres. The as-milled and annealed products were characterized by X-ray diffraction, Mössbauer spectroscopy, transmission electron microscopy and magnetization. The as-milled samples showed the formation of an Fe_1+YCr_2?YO_4?δ nanostructured and disordered spinel phase, the α₁-Fe(Cr) and α₂-Cr(Fe) solid solutions and the presence of non-exhausted precursors. For the samples annealed in inert atmosphere, the chromite (FeCr₂O₄) formation and the recrystallization of the precursors were verified. The hydrogen treated samples revealed the reduction of the spinel phase, with the phase separation of the chromia phase and retention of the Fe–Cr solid solutions. All the samples, either as-milled or annealed, presented the magnetization versus applied field curves typical for superparamagnetic systems.     

Magnetite/carbon core-shell nanorods as anode materials for lithium-ion batteries

Carbon coated magnetite (Fe₃O₄) core-shell nanorods were synthesized by a hydrothermal method using Fe₂O₃ nanorods as the precursor. Transmission electron spectroscopy (TEM) and high resolution TEM (HRTEM) analysis indicated that a carbon layer was coated on the surfaces of the individual Fe₃O₄ nanorods. The electrochemical properties of Fe₃O₄/carbon nanorods as anodes in lithium-ion cells were evaluated by cyclic voltammetry, ac impedance spectroscopy, and galvanostatic charge/discharge techniques. The as-prepared Fe₃O₄/C core-shell nanorods show an initial lithium storage capacity of 1120 mAh/g and a reversible capacity of 394 mAh/g after 100 cycles, demonstrating better performance than that of the commercial graphite anode material.     

Thermal behaviour of malonic acid,sodium malonate and its compounds with some bivalent transition metal ions

Characterization, thermal stability and thermal decomposition of transition metal malonates, MCH₂C₂O₄·nH₂O (M = Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II)), as well as, the thermal behaviour of malonic acid (C₃H₄O₄) and its sodium salt (Na₂CH₂C₂O₄·H₂O) were investigated employing simultaneous thermogravimetry and differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC), infrared spectroscopy, TG-FTIR system, elemental analysis and complexometry. The dehydration, as well as, the thermal decomposition of the anhydrous compounds occurs in a single step. For the sodium malonate the final residue up to 700 °C is sodium carbonate, while the transition metal malonates the final residue up to 335 °C (Mn), 400 °C (Fe), 340 °C (Co), 350 °C (Ni), 520 °C (Cu) and 450 °C (Zn) is Mn₃O₄, Fe₂O₃, Co₃O₄, NiO, CuO and ZnO, respectively. The results also provided information concerning the ligand's denticity, thermal behaviour and identification of some gaseous products evolved during the thermal decomposition of these compounds.     

Pectin mediated green synthesis of Fe3O4/Pectin nanoparticles under ultrasound condition as an anti-human colorectal carcinoma bionanocomposite

This work described the one-pot synthesis of apple pectin encapsulated Fe₃O₄ nanoparticles (Fe₃O₄/Pectin NPs) which is prepared by co-precipitation of Fe(II/(III) ions in alkaline solution mediated by pectin under ultrasound condition. This process led to formation of magnetic nanoparticles within the network of pectin. Physicochemical characterization of the as-synthesized Fe₃O₄/Pectin NPs was carried out through electron microscopy (SEM and TEM), energy dispersive X-ray spectroscopy (EDX), vibrating sample magnetometer (VSM) and X-ray diffraction (XRD). The in vitro cytotoxic and anti-colorectal cancer effects of biologically synthesized Fe₃O₄/Pectin NPs against Ramos.2G6.4C10, HCT-8 [HRT-18], HCT 116, and HT-29 cancer cell lines were assessed. The anti-colorectal cancer properties of the Fe₃O₄/Pectin NPs could significantly remove Ramos.2G6.4C10, HCT-8 [HRT-18], HCT 116, and HT-29 cancer cell lines in a time and concentration-dependent manner by MTT assay. The IC₅₀ of the Fe₃O₄/Pectin NPs were 317, 337, 187, and 300 µg/mL against Ramos.2G6.4C10, HCT-8 [HRT-18], HCT 116, and HT-29 cancer cell lines. The antioxidant activity of Fe₃O₄/Pectin NPs was determined by DPPH method. The Fe₃O₄/Pectin NPs showed the high antioxidant activity according to the IC₅₀ value. It seems that the anti-human colorectal cancer effect of recent nanoparticles is due to their antioxidant effects.     

Structural,morphological and magnetic properties of nano-crystalline zinc substituted cobalt ferrite system

Nano-crystalline zinc-substituted cobalt ferrite powders, Co_1−xZn_xFe₂O₄ (x = 0, 0.25, 0.5, 0.75 and 1), have been synthesized by the combustion route. The structural, morphological and magnetic properties of the products were determined and characterized in detail by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and vibrating sample magnetometer (VSM). X-ray analysis showed that the samples were cubic spinel. The increase in zinc concentration resulted in an increase in the lattice constant, unit cell volume, X-ray density, ionic radii, the distance between the magnetic ions and bond lengths on tetrahedral sites and octahedral sites of cubic spinel structure. Opposite behavior was observed for the average crystallite size of the as synthesized solids. The variation of saturation magnetization (M_s) value of the samples was studied. The maximum saturation magnetization value of the Co_o.25Zn_0.75Fe₂O₄ sample reached 76.87 emu/g. The high saturation magnetization of these samples suggests that this method is suitable for preparing high-quality nano-crystalline magnetic ferrites for practical applications.     

Mesoporous Fe2O3 nanoparticles as high performance anode materials for lithium-ion batteries

This work introduces an effective, inexpensive, and large-scale production approach to the synthesis of Fe₂O₃ nanoparticles with a favorable configuration that 5 nm iron oxide domains in diameter assembled into a mesoporous network. The phase structure, morphology, and pore nature were characterized systematically. When used as anode materials for lithium-ion batteries, the mesoporous Fe₂O₃ nanoparticles exhibit excellent cycling performance (1009 mA h g^− 1 at 100 mA g^− 1 up to 230 cycles) and rate capability (reversible charging capacity of 420 mA h g^− 1 at 1000 mA g^− 1 during 230 cycles). This research suggests that the mesoporous Fe₂O₃ nanoparticles could be suitable as a high rate performance anode material for lithium-ion batteries.     

Characterization of a new magnesium hydrogen orthophosphate salt,Mg3.5H2(PO4)3, synthesized in supercritical water

Beige crystals of a new magnesium hydrogen orthophosphate salt, Mg_3.5H₂(PO₄)₃, as well as nanoparticles of an amorphous, non-Mg-containing phosphate material, Fe_1−yK_yPO₄ (0 < y < 1), have been produced by hydrothermal reactions in supercritical water (SCW) of equivalent quantities of aqueous MgCl₂·6H₂O (2 M), and K₄P₂O₇ (1 M) in concentrated HCl in a stainless-steel batch reactor at 400–450 °C and 25–32 MPa. The new salt has been characterized by single-crystal X-ray diffraction and IR and Raman spectroscopies. It crystallizes in the triclinic space group Pī, Z = 2 with the following unit-cell parameters: a = 6.438(1), b = 7.856(1), c = 9.438(1) Å; α = 104.57(1), β = 108.61(1), γ = 101.28(1)°, V = 739.99 Å³. The effects of the SCW conditions on the nature of the products and their yields and morphologies have been studied by IR and Raman spectroscopies, X-ray powder diffraction, X-ray energy dispersive analysis, scanning electron microscopy, transmission electron microscopy and inductively coupled plasma analysis.