Reticular Sn nanoparticle-dispersed PAN-based carbon nanofibers for anode material in rechargeable lithium-ion batteries

Reticular tin nanoparticle-dispersed carbon (Sn/C) nanofibers were fabricated by stabilization of electrospun SnCl₄/PAN composite fibers and subsequent carbonization at different temperatures. These Sn/C composite nanofibers used as anode materials for rechargeable lithium-ion batteries (LIBs) show that the Sn/C nanofibers at 700 and 850 °C present much higher charge (785.8 and 811 mA h g^?1) and discharge (1211.7 and 993 mA h g^?1) capacities than those at 550 and 1000 °C and the as-received CNFs at 850 °C, corresponding to coulombic efficiencies of 64.9% and 81.7%, respectively. The superior electrochemical properties of the intriguing Sn/C nanofibers indicate a promising application in high performance Li-ion batteries.     

Infiltrated Sr2Fe1.5Mo0.5O6/La0.9Sr0.1Ga0.8Mg0.2O3 electrodes towards high performance symmetrical solid oxide fuel cells fabricated by an ultra-fast and time-saving procedure

Herein, the Sr₂Fe_1.5Mo_0.5O₆ (SFM) precursor solution is infiltrated into a tri-layered “porous La_0.9Sr_0.1Ga_0.8Mg_0.2O₃ (LSGM)/dense LSGM/porous LSGM” skeleton to form both SFM/LSGM symmetrical fuel cells and functional fuel cells by adopting an ultra-fast and time-saving procedure. The heating/cooling rate when fabricating is fixed at 200 °C/min. Thanks to the unique cell structure with high thermal shock resistance and matched thermal expansion coefficients (TEC) between SFM and LSGM, no SFM/LSGM interfacial detachment is detected. The polarization resistances (Rp) of SFM/LSGM composite cathode and anode at 650 °C are 0.27 Ω·cm² and 0.235 Ω·cm², respectively. These values are even smaller than those of the cells fabricated with traditional method. From scanning electron microscope (SEM), a more homogenous distribution of SFM is identified in the ultra-fast fabricated SFM/LSGM composite, therefore leading to the enhanced performance. This study also strengthens the evidence that SFM can be used as high performance symmetrical electrode material both running in H₂ and CH₄. When using H₂ as fuel, the maximum power density of “SFM-LSGM/LSGM/LSGM-SFM” functional fuel cell at 700 °C is 880 mW cm^− 2. By using CH₄ as fuel, the maximum power densities at 850 and 900 °C are 146 and 306 mW cm^− 2, respectively.     

Direct electrochemistry and electrocatalysis of hemoglobin entrapped in composite matrix based on chitosan and CaCO3 nanoparticles

The direct electron transfer between hemoglobin (Hb) and the underlying glassy carbon electrode (GCE) can be readily achieved via a high biocompatible composite system based on biopolymer chitosan (CHT) and inorganic CaCO₃ nanoparticles (nano-CaCO₃). Cyclic voltammetry of Hb-CHT/nano-CaCO₃/GCE showed a pair of stable and quasi-reversible peaks for HbFe(III)/Fe(II) redox couple in pH 7.0 buffer. The electrochemical reaction of Hb immobilized in CHT/nano-CaCO₃ composite matrix exhibited a surface-controlled process accompanied by electron and proton transfer. The electron transfer rate constant was estimated to be 1.8 s⁻¹. This modified electrode showed a high thermal stability up to 60 °C. The apparent Michaelis–Menten constant was calculated to be 7.5 × 10⁻⁴ M, indicating a high catalytic activity of the immobilized Hb toward H₂O₂. The interaction between Hb and this nano-hybrid material was also investigated using FT-IR and UV–vis spectroscopy, indicating that Hb retained its native structure in this hybrid matrix.     

Nano-structured Li3V2(PO4)3/carbon composite for high-rate lithium-ion batteries

Nano-structured Li₃V₂(PO₄)₃/carbon composite (Li₃V₂(PO₄)₃/C) has been successfully prepared by incorporating the precursor solution into a highly mesoporous carbon with an expanded pore structure. X-ray diffraction analysis, scanning electron microscopy, and transmission electron microscopy were used to characterize the structure of the composites. Li₃V₂(PO₄)₃ had particle sizes of < 50 nm and was well dispersed in the carbon matrix. When cycled within a voltage range of 3 to 4.3 V, a Li₃V₂(PO₄)₃/C composite delivered a reversible capacity of 122 mA h g^? 1 at a 1C rate and maintained a specific discharge capacity of 83 mA h g^? 1 at a 32C rate. These results demonstrate that cathodes made from a nano-structured Li₃V₂(PO₄)₃ and mesoporous carbon composite material have great potential for use in high-power Li-ion batteries.     

Improved electrochemical performance of SrCo0.8Fe0.2O3−δ–La0.45Ce0.55O2−δ composite cathodes for IT-SOFC

The performance of the SrCo_0.8Fe_0.2O_3−δ(SCF)–La_0.45Ce_0.55O_2−δ(LDC) composite cathodes was studied in this paper. The composite cathodes were prepared by screen-printing, and then sintered at 1200 °C for 2 h. Electrochemical impedance spectroscopy (EIS) and cathodic polarization test were carried out to investigate the electrochemical properties of the composite cathodes. The results showed that the composite cathodes had superior electrochemical performance compared to that of the pure SCF cathodes. Through optimizing the structures of composite cathodes, the cathodic overpotential of triple-layer SCF–LDC composite cathodes was only 23 mV at 0.3 A cm⁻². The specific ohmic resistance, charge transfer resistance and gas phase diffusion resistance of the triple-layer SCF–LDC cathodes were the lowest for the SCF–LDC composite cathodes, and they were 0.1 Ω cm², 0.01 Ω cm² and 0.1 Ω cm² respectively at 800 °C. The changes were attributable to the enlargement of triple phases boundary (tpb) and enhancement of the adhesion between electrode and electrolyte by adding LDC to the cathode material.     

Oxygen permeation through (Bi2O3)0.74(SrO)0.26–Ag (40% v/o) composite

The dense dual phase composite membrane made from strontium-stabilized bismuth oxide and silver, (Bi₂O₃)_0.74(SrO)_0.26–Ag (40% v/o), was investigated. The composite was found to exhibit very high electrical conductivity at the room temperature, revealing that the silver phase has formed electron-conducting networks in the oxide matrix. The composite shows much improved oxygen permeability compared with the bismuth oxide alone. An oxygen flux of 5×10⁻⁸ mol cm⁻² s⁻¹ was observed for a 1.00 mm thick composite at 700°C with oxygen partial pressures of the feed and permeate side at 0.209, 0.0024 atm, respectively. Combination of electrical conductivity and oxygen permeation measurements reveals that oxygen-ion conduction through the oxide phase of the composite is the rate-limiting step for oxygen permeation.     

Single microparticle applied in magnetic-switchable electrochemistry

In this work we demonstrated the micromanipulation of a single magnetic microparticle (Fe₃O₄) modified with Prussian blue (PB) for use in magnetic-switchable electrochemistry. A single Fe₃O₄-PB microparticle with 120 μm was isolated in an electrochemical microcell (20 μL), in which a fine control of PB electrochemical process on carbon electrode (Ø = 4.0 mm) was obtained. For cyclic voltammetry, redox processes attributed to PB/PW (Prussian blue/Prussian white) one electron redox couple were observed, however the capacitive currents were very high. On the other hand, by using differential pulse voltammetry, a maximum faradaic current for anodic peak of 200 nA cm^− 2 at 0.06 V was observed. Several and high stable chronoamperograms were obtained by “switch on” and “switch off” magnetic commutative states for a single microparticle, showing that the system developed here can be very promising for application in electrochemistry.     

Snx[BPO4]1−x composites as negative electrodes for lithium ion cells: Comparison with amorphous SnB0.6P0.4O2.9 and effect of composition

A comparative study of two Sn-based composite materials as negative electrode for Li-ion accumulators is presented. The former SnB_0.6P_0.4O_2.9 obtained by in-situ dispersion of SnO in an oxide matrix is shown to be an amorphous tin composite oxide (ATCO). The latter Sn_0.72[BPO₄]_0.28 obtained by ex-situ dispersion of Sn in a borophosphate matrix consists of Sn particles embedded in a crystalline BPO₄ matrix. The electrochemical responses of ATCO and Sn_0.72[BPO₄]_0.28 composite in galvanostatic mode show reversible capacities of about 450 and 530 mAh g⁻¹, respectively, with different irreversible capacities (60% and 29%). Analysis of these composite materials by ¹¹⁹Sn Mössbauer spectroscopy in transmission (TMS) and emission (CEMS) modes confirms that ATCO is an amorphous Sn^II composite oxide and shows that in the case of Sn_0.72[BPO₄]_0.28, the surface of the tin clusters is mainly formed by Sn^II in an amorphous interface whereas the bulk of the clusters is mainly formed by Sn⁰. The determination of the recoilless free fractions f (Lamb-Mössbauer factors) leads to the effective fraction of both Sn⁰ and Sn^II species in such composites. The influence of chemical composition and especially of the surface-to-bulk tin species ratio on the electrochemical behaviour has been analysed for several Sn_x[BPO₄]_1−x composite materials (0.17<x<0.91). The cell using the compound Sn_0.72[BPO₄]_0.28 as active material exhibits interesting electrochemical performances (reversible capacity of 500 mAh g⁻¹ at C/5 rate).     

Investigation of immiscible alloy system of Al–Sn thin films as anodes for lithium ion batteries

The Al–Sn, which is immiscible alloy, film was prepared by e-beam deposition to explore the possibility as anode material for lithium ion batteries for the first time. The film has a complex structure with tiny Sn particles dispersed homogeneously in the Al active matrix. The diffusion coefficients of Li⁺ in these Al–Sn alloy films were determined to be 2.1–3.2 × 10⁻⁸ cm²/s by linear sweep voltammetry. The film electrode with high Al content (Al–33wt%Sn) delivered a high initial discharge capacity of 972.8 mA h g⁻¹, while the film electrode with high Sn content (Al–64wt%Sn) with an initial discharge capacity of 552 mA h g⁻¹ showed good cycle performance indicated by retaining a capacity of about 381 mA h g⁻¹ after 60 cycles. Our preliminary results demonstrate that Al–Sn immiscible alloy is a potential candidate for anodic material of lithium ion batteries.     

Dielectric spectroscopy of biodegradable poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) films

In this paper, we report a systematic study of the dielectric relaxation spectroscopy of biodegradable poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) polyester which has potential applications as a “green” dielectric material in electronic devices. The dielectric spectra was measured over a wide frequency range (10⁰ ～ 10⁷ Hz) from ?100 to 60 °C. A glass and a sub-glass transition relaxations were observed in the dielectric spectra of PHBHHx. In addition, a nearly constant loss behavior was found by analyzing the dielectric and conductivity spectra.     

A combined Mössbauer spectroscopy and x-ray diffraction operando study of Sn-based composite anode materials for Li-ion accumulators

The reaction mechanisms of Li with Sn/BPO₄ composites to be used as negative electrode materials for Li-ion batteries were studied during electrochemical cycling by operando Mössbauer spectroscopy and X-ray diffraction using a specifically conceived in situ electrochemical cell. The starting composites consist of three main components: β-Sn particles as the electrochemically active species, an inactive matrix of BPO₄ and an amorphous Sn^II-borophosphate interfacial phase linking the two former components and improving the cohesion of the composite. During the first discharge, the latter Sn(II) species are first reduced to zerovalent tin forming Li-poor Li–Sn alloys. After its complete reduction, the reaction of Li continues with β-Sn leading to Li–Sn alloys increasingly rich in Li, with a final composition between those of Li₇Sn₂ and Li₁₃Sn₅. X-ray diffraction shows a progressive loss of long range order of the composites with the suppression of the diffraction peaks of the initial β-Sn and the formation of an ill-defined mixture of Li–Sn alloys. The evolution of this mechanism is investigated on going from a reference Sn/BPO₄ composite prepared by conventional ceramic methods with common micrometric BPO₄ to a new improved material prepared by carbothermal synthesis starting from nanometric BPO₄. With the new composite prepared by carbothermal synthesis, a significant improvement of the reversible capacity at the first cycle is obtained together with a slight improvement of the cycling behaviour. An additional improvement can be obtained by increasing the rate of the first discharge, and thus hampering the formation of the thermodynamically stable LiSn intermetallic.     

A Li3V2(PO4)3/C thin film with high rate capability as a cathode material for lithium-ion batteries

A monoclinic lithium vanadium phosphate (Li₃V₂(PO₄)₃) and carbon composite thin film (LVP/C) is prepared via electrostatic spray deposition. The film is studied with X-ray diffraction, scanning and transmission electron microscopy and galvanostatic cell cycling. The LVP/C film is composed of carbon-coated Li₃V₂(PO₄)₃ nanoparticles (50 nm) that are well distributed in a carbon matrix. In the voltage range of 3.0–4.3 V, it exhibits a reversible capacity of 118 mA h g^?1 and good capacity retention at the current rate of 1 C, while delivers 80 mA h g^?1 at 24 C. These results suggest a practical strategy to develop new cathode materials for high power lithium-ion batteries.     

On the electrochemical behavior of LiMXFe1 − XPO4 [M = Cu,Sn; X = 0.02] anodes – An approach to enhance the anode performance of LiFePO4 material

An attempt, for the first time, has been made to explore the possible electrochemical activity of partially substituted LiFePO₄ as negative electrode for lithium battery applications. In this regard, cationic substitution of Cu and Sn to the native LiFePO₄/C electroactive material has been made individually via. ball milling treatment. This simple procedure has resulted in the formation of metal substituted LiFePO₄ powders of phase pure nature and finer crystallite size (<1 μm) with better distribution of particles. Herein, 2% of metals such as Cu (transition) and Sn (non-transition) were chosen as dopants with a view to understand the effect of transition and non-transition metals upon LiFePO₄ individually. It is interesting to note that irrespective of the nature of the dopant metal, the simple route of cationic substitution via. ball milling endowed with improved conductivity of LiFePO₄, as evidenced by the augmented reversible specific capacity values of substituted LiFePO₄ anodes. In other words, the LiCu_0.02Fe_0.98PO₄/C anode delivered a reversible capacity of ∼380 mAh/g with an enhancement in the capacity retention behavior and excellent coulumbic efficiency value compared to that of LiFePO₄. In contrast, LiSn_0.02Fe_0.98PO₄/C anode displayed an appreciable reversible capacity of ∼400 mAh/g with a significant steady discharge profile. Results of Fourier Transform Infra Red (FTIR) spectroscopy and Cyclic Voltammetric studies of LiM_XFe_1 − XPO₄ (M = Cu, Sn)/C composites are also appended and correlated suitably.     

Molecular switching complexes with iron and tin as central atom

The precursor [Fe^III(L)Cl] (LH₂ = N,N′-bis(2′-hydroxy-benzyliden)-1,6-diamino-3-N-hexane is a high-spin (S = 5/2) complex. This precursor is combined with the bridging units [Sn^IV(X)₄] (X = CN^?, NCS^?) to yield star-shaped pentanuclear clusters, [(LFe^III–X)₄Sn]Cl₄. For X = CN^? the ⁵⁷Fe-Mössbauer data show a multiple spin transition between iron(III) in the high-spin and low-spin state, while the ^119mSn-Mössbauer data indicate a valence tautomerism between Sn(IV) and Sn(II). Changing the bridging unit from X = CN^? to X = NCS^? turns the switchability off.     

Spherical Sn–Ni–C alloy anode material with submicro/micro complex particle structure for lithium secondary batteries

Submicro/micro-scaled spherical Sn–Ni–C alloy powders synthesized from oxides of Sn and Ni via carbothermal reduction at 900 °C were examined for use as anode materials in Li-ion battery. The synthesized spherical Sn–Ni–C particles show a loose micro-sized structure and a multi-phase composition. The reaction product carbon oxide gases yielded in the carbothermal reduction process should be responsible to the loose structure characteristics of Sn–Ni–C particles. The prepared Sn–Ni–C alloy composite electrode exhibits a stable reversible capacity of 310 mA h g⁻¹ at constant current density of 100 mA g⁻¹, and can be retained at 290 mA h g⁻¹ after 25 cycles. The space existing in loose particle can accommodate the large volume changes during charge/discharge cycling. The ductile component Ni plays as a buffer to relieve the mechanical stress induced by the large volume changes upon cycling. The remained carbon can prevent the aggregation between small alloy particles. All these factors contribute greatly to the excellent cycling stability of Sn–Ni–C alloy electrode. This carbothermal reduction method is simple, cheap and mass-productive, thus suitable to large scale production of alloy anode powders used for lithium ion batteries.     

Partially reduced SnO2 nanoparticles anchored on carbon nanofibers for high performance sodium-ion batteries

One-dimensional (1-D) carbon nanofibers anchored with partially reduced SnO₂ nanoparticles (SnO₂/Sn@C) were successfully synthesized through a simple electrospinning method followed by carbon coating and thermal reduction processes. The partially reduced Sn frameworks, combined with the carbon fibers, provide a more favorable mechanism for sodiation/desodiation than SnO₂. As a result, SnO₂/Sn@C exhibits a high reversible capacity (536 mAh g^− 1 after 50 cycles) and an excellent rate capability (396 mAh g^− 1 even at 2 C rate) when evaluated as an anode material for sodium-ion batteries (SIBs).     

Synthesis and characterization of novel intramolecularly O,C,O-coordinated heteroleptic organostannylenes and their tungstenpentacarbonyl complexes

The syntheses are reported of the novel heteroleptic organostannylenes [2,6-(ROCH₂)₂C₆H₃]SnCl (1, R = Me; 2, R = t-Bu) and of their tungstenpentacarbonyl complexes [2,6-(ROCH₂)₂C₆H₃](X)SnW(CO)₅ (3, X = Cl, R = Me; 4, X = Cl, R = t-Bu; 5, X = H, R = Me). The compounds were characterized by means of elemental analyses, ¹H, ¹³C, ¹¹⁹Sn NMR spectroscopies, electrospray mass spectrometry and in case of 3 and 4 also by single crystal X-ray diffraction analysis. For the two latter compounds the substituents bound at the ether oxygen atom control the strength of intramolecular O → Sn coordination. Thus, the O–Sn distances amount to 2.391(5)/2.389(5) (3) and 2.464(3)/2.513(3) Å (4).     

Structural and electrochemical investigation of Li2MgSnO4 anode for lithium batteries

Hexagonal Li₂MgSnO₄ compound was synthesized at 800 °C using Urea Assisted Combustion (UAC) method and the same has been exploited as an anode material for lithium battery applications. Structural investigations through X-ray diffraction, Fourier Transform Infra Red spectroscopy and ⁷Li NMR (Nuclear Magnetic Resonance spectroscopy) studies demonstrated the existence of hexagonal crystallite structure with a = 6.10 and c = 9.75. An average crystallite size of ∼400 nm has been calculated from PXRD pattern, which was further evidenced by SEM images. An initial discharge capacity of ∼794 mA h/g has been delivered by Li₂MgSnO₄ anode with an excellent capacity retention (85%) and an enhanced coulombic efficiency (97–99%). Further, the Li₂MgSnO₄ anode material has exhibited a steady state reversible capacity of ∼590 mA h/g even after 30 cycles, thus qualifying the same for use in futuristic lithium battery applications.     

Nanocomposite of a chromium Prussian blue with TiO2. Redox reactions and the synthesis of Prussian blue molecule-based magnets

The reaction of [NEt₄]₃[Cr(CN)₆] with titanium(III) p-toluenesulfonate at a pH of 2 affords a gray solid whose metal content and spectroscopic and magnetic properties are fully consistent with it being a Prussian blue material of stoichiometry “Ti^III[Cr^III(CN)₆] · H₂O”. The carbon, nitrogen, and hydrogen content, however, are not consistent with this stoichiometry, and further investigation showed that the gray material has a powder X-ray diffraction profile, infrared spectrum, and magnetic properties very similar to those of the “all-chromium” Prussian blue Cr^II[Cr^III(CN)₆]_0.67 · 6H₂O. All data, including the C, H, and N weight percentages, are consistent with the conclusion that the material isolated is a nanocomposite of Cr^II[Cr^III(CN)₆]_0.67 · xH₂O and TiO₂ in the ratio of 1–1.6. These results suggest that Ti^III reduces some of the [Cr^III(CN)₆]³⁻ ions to generate Ti^IV and Cr^II; the former hydrolyzes to amorphous TiO₂ · 2H₂O, the latter loses its bound CN ligands and reacts with unreacted [Cr^III(CN)₆]³⁻ ions to generate the crystalline all-chromium PB species. The electrochemical potentials suggest that the [Cr^III(CN)₆]³⁻ ion should not be reduced by Ti^III; evidently, this unfavorable reaction is driven by the insolubility of the reaction products. The results constitute a cautionary tale in two respects: first, that the characterization of Prussian blue materials must be conducted with care and, second, that the insolubility of Prussian blue analogues can sometimes drive reactions that in solution are thermodynamically unfavorable.     

Self-assembled Li4Ti5O12/TiO2/Li3PO4 for integrated Li–ion microbatteries

This work aims to maximize the number of active sites for energy storage per geometric area, by approaching the investigation to 3D design for microelectrode arrays. Self-organized Li₄Ti₅O₁₂/TiO₂/Li₃PO₄ composite nanoforest layer (LTL) is obtained from a layer of self organized TiO₂/Li₃PO₄ nanotubes. The electrochemical response of this thin film electrode prepared at 700 °C exhibited lithium insertion and de-insertion at 1.55 and 1.57 V respectively, which is the typical potential found for lithium titanates. The effects of lithium phosphate on lithium titanate are explored for the first time. By cycling between 2.7 and 0.75 V the LTL/LiFePO₄ full cell delivered 145 mA h g^− 1 at an average potential of 1.85 V leading to an energy density of 260 W h kg^− 1 at C/2. Raman spectroscopy revealed that the γ-Li₃PO₄/lithium titanate structure is preserved after prolonged cycling. This means that Li₃PO₄ plays an important role for enhancing the electronic conductivity and lithium ion diffusion.