Luminescent and scintillation properties of the Pr3+ doped single crystalline films of Lu3Al5−xGaxO12 garnet

The Pr³⁺ d–f luminescence was investigated in the single crystalline films (SCF) of Lu₃Al_5−xGa_xO₁₂:Pr garnet solid solution at x = 1–3, grown by the liquid phase epitaxy (LPE) method from the melt-solution based on the PbO–B₂O₃ flux. The shape of CL spectra and decay kinetics of Pr³⁺ ions in Lu₃Al_5−xGa_xO₁₂ SCFs strongly depend on the total gallium concentration x and distribution of Ga³⁺ ions between the tetrahedral and octahedral position of the garnet host. The best scintillation properties of Lu₃Al_5−xGa_xO₁₂:Pr SCF are achieved at the nominal Ga content in melt-solution in the x = 2–2.5 range.     

Influence of lead-related centers on luminescence of Ce3+ and Pr3+ centers in single crystalline films of aluminium perovskites and garnets

Luminescence characteristics of Ce³⁺- and Pr³⁺-doped aluminium perovskite (LuAlO₃, YAlO₃) and garnet (Lu₃Al₅O₁₂, Y₃Al₅O₁₂) single crystalline films, prepared by the liquid phase epitaxy method with the use of the PbO-based flux, were investigated by the time-resolved spectroscopy methods in the 80–300 K temperature range. The influence of various lead-related centers on the characteristics of the Ce³⁺- and Pr³⁺-related luminescence centers was studied. It was found that the presence of lead-related centers in the single crystalline films results in a decrease of the quantum efficiency and appearance of undesirable slow components in the luminescence decay kinetics. The possibilities of improving the scintillation characteristics of the single crystalline films were considered.     

Luminescent properties of LuAG:Yb and YAG:Yb single crystalline films grown by Liquid Phase Epitaxy method

In this work, investigation of the spectroscopic parameters of the luminescence of Yb³⁺ ions in single crystalline films of Lu₃Al₅O₁₂ and Y₃Al₅O₁₂ garnets was performed using the synchrotron radiation excitation with the energy in the range of Yb³⁺ charge transitions (CT), exciton range and the onset of interband transitions of these garnets. The basic spectroscopic parameters of the Yb³⁺ CT luminescence in LuAG and YAG hosts were determined and summarized with taking into account the differences in the band gap structure of these garnets.     

真空紫外光激发下掺Pr3+铝酸盐的自陷激子对Pr3+发光的影响

研究了SrAl₁₂O₁₉:Pr³⁺ 和Y₃Al₅O₁₂(YAG):Pr³⁺ 在20K, 77K和300K的真空紫外(VUV)光谱，二者除了表现出Pr³⁺特有的发射性质外，还产生了一种特殊的发射现象，即自陷激子(STE)发射,并且其随着稀土离子浓度和温度的降低而增强. 还着重讨论了自陷激子对Pr³⁺发光的影响. 关键词： 自陷激子 真空紫外 3+')" href="#">Pr³⁺ 本征激发     

On the correlation between the composition of Pr doped garnet type materials and their photoluminescence properties

Lu₃(Al,Ga)₅O₁₂ and (Y,Lu)₃(Al,Mg,Si)₅O₁₂ samples doped with 1% Pr³⁺ were prepared by two aqueous sol-gel chemistry approaches, such as citrate and glycolate methods. All samples were characterised by powder X-ray diffraction (XRD), thermal quenching (TQ), fluorescence lifetime measurements and photoluminescence (PL) techniques. It turned out that the Pr³⁺ emission is very sensitive to the composition of the garnet host lattice. Lu₃Al₅O₁₂:Pr³⁺ samples showed mainly [Xe]4f¹5d¹→[Xe]4f² broad band emission in UV-blue region, whereas [Xe]4f²-[Xe]4f² line emission of Pr³⁺ dominated in Lu₃Ga₅O₁₂ samples. Modification of garnet crystals with Mg²⁺-Si⁴⁺ pair has led to generation of strong crystal field strength resulting in energy transfer from 5d to 4f orbitals. Y₃AlMg₂Si₂O₁₂ composition generated the strongest crystal field splitting out of all synthesised samples and showed practically only Pr³⁺ [Xe]4f²-[Xe]4f² line emission in the red spectral region.     

Enhancement of red spectral emission intensity of Y3Al5O12:Ce phosphor via Pr co-doping and Tb substitution for the application to white LEDs

We have enhanced color-rendering property of a blue light emitting diode (LED) pumped white LED with yellow emitting Y₃Al₅O₁₂:Ce³⁺ (YAG:Ce) phosphor using addition of Pr and Tb as a co-activator and host lattice element, respectively. Pr³⁺ addition to YAG:Ce phosphor resulted in sharp emission peak at about 610 nm through ¹D₂→³H₄ transition. And when Tb³⁺ substituted Y³⁺ sites, Ce³⁺ emission band shifted to a longer wavelength due to larger crystal field splitting. Y₃Al₅O₁₂:Ce³⁺, Pr³⁺ and (Y_1−xTb_x)₃Al₅O₁₂:Ce³⁺ phosphors were coated on blue LEDs to fabricate white LEDs, respectively, and their color-rendering indices (CRIs, R_a) were measured. As a consequence of the addition of Pr³⁺ or Tb³⁺, CRI of the white LEDs improved to be R_a=83 and 80, respectively. Especially, blue LED pumped (Y_0.2Tb_0.8)₃Al₅O₁₂:Ce³⁺ white LED showed both strong luminescence and high color-rendering property.     

Magnetic-field-controlled polarized luminescence of Y3Al5O12-Tb and Y3Al5O12-Ho garnets

The circularly polarized luminescence spectra of Y₃Al₅O₁₂-Tb and Y₃Al₅O₁₂-Ho garnets are analyzed in the wavelength ranges of the ⁵ D ₄ → ⁷ F ₅ transition in the Tb³⁺ ion and the ⁵ S ₂ → ⁵ I ₈ transition in the Ho³⁺ ion. It is found that the intensities of the orthogonal circularly polarized components of the series of luminescence lines attributed to the studied garnets differ substantially. The results obtained are interpreted in terms of the mixing of the Tb³⁺ and Ho³⁺ electronic states in an external magnetic field.     

Luminescent properties and energy transfer of Y3Al5O12:Ce3+, Ln3+ (Ln=Tb,Pr) prepared by polymer-assisted sol–gel method

Y₃Al₅O₁₂:Ce³⁺, Pr³⁺ and Y₃Al₅O₁₂:Ce³⁺, Tb³⁺ nano-particles have been synthesized by polymer-assisted sol–gel method. Crystal structure, luminescent properties and energy transfer of the phosphors are analyzed. XRD study of polycrystalline powders shows that all the samples are of YAG phase without impurity. Photoluminescence (PL) emission and excitation spectra illustrate that in YAG:Ce, Pr phosphors, energy transfer occurs mutually between Ce³⁺ and Pr³⁺, while in YAG:Ce, Tb systems, only one-way path energy transfer of Tb³⁺→Ce³⁺ is observed.     

Structure of precursors of complex oxides of rare-earth elements prepared by solvent thermolysis

X-ray diffraction and electron microscopy were used to study the structural states of precursors of borates LuBO₃, YBO₃, and EuBO₃, garnets Lu₃Al₅O₁₂ and Y₃Al₅O₁₂, and perovskites LuAlO₃ and LaAlO₃ prepared by solvent thermolysis from a nitric-acid solution or an ammonium nitrate melt solution of simple oxides and nitrates of rare-earth elements. The precursors are mainly found to be amorphous. In some cases, small amounts of non-reacted initial oxides and nitrates are observed to be in an amorphous matrix.     

Luminescence properties of Pr3+-doped transparent oxyfluoride glass–ceramics containing BaYF5 nanocrystals

Transparent oxyfluoride glass–ceramics containing BaYF₅ nanocrystals were successfully synthesized by appropriate heat-treatment on the SiO₂–Al₂O₃–Na₂O–BaF₂–Y₂O₃–Pr₆O₁₁ precursor glass. The structure and luminescence properties of the precursor glass and glass–ceramics were investigated by DSC, XRD, TEM, optical transmission, photoluminescence, decay time and radioluminescence spectra. The XRD results indicate that the BaYF₅ nanocrystals can percitated in the precursor glass and the sharper emission peaks of Pr³⁺ in glass ceramic suggests that Pr³⁺ ions are incorporated into the BaYF₅ nanocrystals. The higher the heat-treatment temperature is, the more the Pr³⁺ ions are centered into BaYF₅ nanocrystals, which results in the optimal concentration of Pr³⁺ in glass ceramic changes on heat-treatment temperature. It is notable that the emission intensity of both photoluminescence and radioluminescence for 0.1 mol% Pr³⁺ in the glass ceramic (GC665) are stronger than those in the precursor glass. The mechanism of enhanced luminescence is also discussed.     

Interface characteristics and mechanical properties of short carbon fibers/Al composites with different coatings

Three kinds of coatings, Ni, Cu and Al₂O₃, were obtained on the surface of short carbon fibers (SCFs). The interface characteristics and mechanical properties of SCFs/Al composites with the various coatings were systematically studied in this paper. The results showed that, compared to non-coating, Ni or Cu coating improved the wettability of SCFs and Al melt. However, the harmful phases Al₃Ni or CuAl₂ generated in interface zone and Al matrix result in the lower mechanical properties. Al₂O₃ coating protected the SCFs and prevented the harmful reaction of Al and SCFs. The interface of Al/Al₂O₃/SCF without any other phase was clean and well bonded, and the Al₂O₃-coated SCFs/Al composite had the highest mechanical properties. The interfacial indentation and fracture mechanism of all the composites were analyzed in detail.     

Defects in Ce-doped LuAG and YAG scintillation layers grown by liquid phase epitaxy

The single crystalline Lu₃Al₅O₁₂ (LuAG) and Y₃Al₅O₁₂ (YAG) garnet layers doped by Ce³⁺ ions were grown by the liquid phase epitaxy from the flux. The effect of the flux composition, growth conditions, and substrate polishing on the layer morphology, creation of defects, and on optical and emission properties of layers was studied. The defects typical of the epitaxial growth are discussed.     

Optical spectroscopy of Ca3Sc2Si3O12, Ca3Y2Si3O12 and Ca3Lu2Si3O12 doped with Pr

The silicates Ca₃Sc₂Si₃O₁₂, Ca₃Y₂Si₃O₁₂ and Ca₃Lu₂Si₃O₁₂, both undoped and doped with Pr³⁺ ions, have been synthesized by solid-state reaction at high temperature. The luminescence spectroscopy and the excited state dynamics of the materials have been studied upon VUV and X-ray excitation using synchrotron radiation. All doped samples have shown efficient 5d-4f emission upon direct VUV excitation of 5d levels, but only Ca₃Sc₂Si₃O₁₂:Pr³⁺ shows luminescence upon interband VUV or X-ray excitation. The VUV excited emission spectra of Ca₃Y₂Si₃O₁₂:Pr³⁺ and Ca₃Lu₂Si₃O₁₂:Pr³⁺ show features attributed to emission from two distinct sites accommodating the Pr³⁺ dopant. The decay kinetics of the Pr³⁺ 5d-4f emission in Ca₃Sc₂Si₃O₁₂:Pr³⁺ upon VUV excitation across the band gap are characterized by decay times in the range 25-28 ns with no significant rise after the excitation pulse. They appear to be faster upon X-ray irradiation than for VUV excitation. Weak afterglow components are attributed to defect luminescence.     

Growth and the luminescence properties of a lutetium gadolinium garnet doped with Ce3+ and Pr3+ ions

Crystals of lutetium gadolinium garnet solid solutions (Lu_{1 − x} Gd _x )Al₅O₁₂ (0 ≤ x ≤ 0.6) doped with Ce³⁺ and Pr³⁺ ions have been prepared by the horizontal directional crystallization method, and their optical and luminescence properties have been investigated. It has been established that the introduction of gadolinium into the lutetium garnet lattice leads to a decrease in the antisite luminescence (Lu_Al centers) in the UV spectral range and to sensitization of the Ce³⁺ ion luminescence. By contrast, the presence of gadolinium results in the quenching of the Pr³⁺ luminescence due to the nonradiative excitation transfer from Pr³⁺ ions to Gd³⁺ ions.     

Effect of composition disorder on the electron paramagnetic resonance spectrum of the thermally populated excited state of Er<Superscript>3+</Superscript> ions in YLuAG mixed garnets

The results of investigation of electron paramagnetic resonance of Er³⁺ ions in the thermally populated first excited state in (Y_{1 − x} Lu _x )₃Al₅O₁₂ (YLuAG) mixed yttrium-lutetium garnet single crystals (0 ≤ x ≤ 1) are considered. In composition-disordered YLuAG, a number of new (as compared to Y₃Al₅O₁₂ (YAG)) Er³⁺ paramagnetic centers are detected; these centers appear due to a change in the crystal field symmetry and magnitude upon isomorphic substitution of Lu³⁺ for Y³⁺ in the yttrium sublattice of garnets. The origin of new paramagnetic centers is established and their formation probability is calculated.     

Synthesis and Characterization of Monodispersed SiO2@Y3Al5O12:Er3+ Core-Shell Particles

Submicron core-shell structure particles SiO₂@Y₃Al₅O₁₂:Er³⁺, which silica spherical particles was coated with an yttrium aluminum garnet (Y₃Al₅O₁₂) layer doped with Er³⁺, were prepared by the modified Pechini-Type sol-gel method for the first time. The structure and morphology of samples were detected by the X-ray powder diffraction (XRD) measurement, field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM), respectively. The results indicate that well-crystallized garnet nanocrystallines were formed on the surface of the silica particles. The luminescent spectra in near infrared and visible region of the core-shell structured SiO₂@Y₃Al₅O₁₂:Er³⁺ powders were also investigated and compared with those of the pure Y₃Al₅O₁₂:Er³⁺ and the Er³⁺ doped silicate glass. The results show that mono-dispersed SiO₂@Y₃Al₅O₁₂:Er³⁺ core-shell spherical particles with the near infrared, red and green luminescent emissions under the excitation of 980 nm laser diode have been successfully synthesized.     

Luminescence and scintillation properties of Y<Subscript>3</Subscript>A<Subscript>l5</Subscript>O<Subscript>12</Subscript>:Ce single crystals and single-crystal films

Luminescence and scintillation properties of Y₃A_l5O₁₂:Ce single crystals grown from the melt by the Czochralski and horizontal directed crystallization methods in various gas media and Y₃A_l5O₁₂:Ce single-crystal films grown by liquid-phase epitaxy from a melt solution based on a PbO-B₂O₃ flux have been comparatively analyzed. The strong dependence of scintillation properties of Y₃A_l5O₁₂:Ce single crystals on their growth conditions and concentrations of Y_Al antisite defects and vacancy defects has been established. Vacancy defects are involved in Ce³⁺ ion emission excitation as the centers of intrinsic UV luminescence and trapping centers. It has been shown that Y₃A_l5O₁₂:Ce single-crystal films are characterized by faster scintillation decay kinetics than single crystals and a lower content of slow components in Ce³⁺ ion luminescence decay during high-energy excitation due to the absence of Y_Al antisite defects in them and low concentration of vacancy defects. At the same time, the light yield of Y₃A_l5O₁₂:Ce single-crystal films is comparable to that of single crystals grown by directed crystallization due to the quenching effect of the Pb²⁺ ion impurity as a flux component and is slightly lower (∼25%) than the light yield of single crystals grown by the Czochralski method.     

Synthesis and characterization of mono-dispersed Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Er<Superscript>3+</Superscript>-coated SiO<Subscript>2</Subscript> nanoparticles by co-precipitation process

In this paper, a facile co-precipitation process for preparing mono-dispersed core–shell structure nanoparticles is reported. The 110 nm SiO₂ cores coated with an yttrium aluminum garnet (Y₃Al₅O₁₂) layer doped with Er³⁺ were synthesized and the influence of the concentration ratio of [urea]/[metal ions] on the final product was investigated. The structure and morphology of samples were characterized by the X-ray powder diffraction, Fourier transform IR spectroscopy and transmission electron microscopy, respectively. The results indicate that a layer of well-crystallized garnet Y₃Al₅O₁₂:Er³⁺ were successfully coated on the silica particles with the thickness of 20 nm. The near infrared and upconversion luminescent spectra of the SiO₂@Y₃Al₅O₁₂:Er³⁺ powders further confirm that a Y₃Al₅O₁₂:Er³⁺ coating layer has formed on the surface of silica spherical particles.     

Improvement of sonocatalytic activity of TiO2 by using Yb,N and F-doped Er3+:Y3Al5O12 for degradation of organic dyes

In this study, several up-conversion luminescence agents (Er³⁺:Y₃Al₅O₁₂, Er³⁺:Yb_0.2Y_2.79Al₅O₁₂, Er³⁺:Yb_0.2Y_2.79Al₅N_0.01O_11.99, Er³⁺:Yb_0.2Y_2.79Al₅F_0.01O_11.99 and Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98) were synthesized using sol–gel method. And then, the corresponding sonocatalyst (Er³⁺:Y₃Al₅O₁₂/TiO₂, Er³⁺:Yb_0.2Y_2.79Al₅O₁₂/TiO₂, Er³⁺:Yb_0.2Y_2.79Al₅N_0.01O_11.99/TiO₂, Er³⁺:Yb_0.2Y_2.79Al₅F_0.01O_11.99/TiO₂ and Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98/TiO₂ coated composites) were prepared by sol–gel coating process. The synthesized up-conversion luminescence agents and their coated composites were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). And that, the sonocatalytic activities were detected through the degradation of Azo Fuchsine (AF) dye in aqueous solution by UV–vis spectroscopy. Some key influences such as heat-treated temperature and heat-treated time on the sonocatalytic activity of Er³⁺:Yb_aY_2.99−aN_xF_yAl₅O_12−x−y/TiO₂ coated composite, as well as ultrasonic irradiation time and initial dye concentration on the sonocatalytic degradation were studied. The results showed that the doping of Yb, N and F into Er³⁺:Y₃Al₅O₁₂/TiO₂ significantly enhanced the sonocatalytic activity of Er³⁺:Y₃Al₅O₁₂/TiO₂ coated composite in the degradation of organic dyes. Particularly, Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98/TiO₂ coated composites with 3:7 M ratio heat-treated at 550 °C for 60 min showed the highest sonocatalytic activity. At last, the experiments also indicated that the Er³⁺:Yb_0.2Y_2.79Al₅N_0.01F_0.01O_11.98/TiO₂ coated composites has a good sonocatalytic activity to degrade other organic dyes under ultrasonic irradiation.     

Synthesis and characterization of monodisperse spherical core-shell structured SiO2@Y3Al5O12:Ce3+/Tb3+ phosphors for field emission displays

Nanocrystalline Y₃Al₅O₁₂: Ce³⁺/Tb³⁺ (average crystalline size 30 nm) phosphor layers were coated on non-aggregated, monodisperse and spherical SiO₂ particles by the sol-gel method, resulting in the formation of core-shell structured SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ particles. X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, photoluminescence, cathodoluminescence spectra, as well as lifetimes were utilized to characterize the core-shell structured SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ phosphor particles. The obtained core-shell structured phosphors consist of well-dispersed submicron spherical particles with a narrow size distribution. The thickness of the Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ shells on the SiO₂ cores (average size about 500 nm, crystalline size about 30 nm) could be easily tailored by varying the number of deposition cycles (100 nm for four deposition cycles). Under the excitation of ultraviolet and low-voltage electron beams (1–3 kV), the core-shell SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ particles show strong yellow-green and green emission corresponding to the 5d–4f emission of Ce³⁺ and ⁵D₄–⁷F _J (J = 6, 5, 4, 3) emission of Tb³⁺, respectively. These phosphors may have potential application in field emission displays.