FT-IR study of the effect of zinc exposure on the biochemical contents of the muscle of Labeo rohita

Heavy metal pollution is a major environmental problem in the modern world due to increasing human activities. Zinc is an essential element involved in a wide variety of cellular processes. However, it becomes toxic when elevated concentrations are introduced into the environment. The goal of the present study is to investigate the effect of zinc exposure on the biochemical contents of the muscle tissues of freshwater species Labeo rohita using Fourier transform infrared (FT-IR) spectroscopy. Since the muscle constitutes the greatest mass of the fish that is consumed, the present study has paid particular attention to muscle component. The result reveals that the zinc exposure causes significant changes in the biochemical contents of the L. rohita muscle tissues. In addition, it causes an alteration in the protein secondary structures by decreasing the α-helix and increasing the β-sheet contents of muscle tissues. Further, it has been observed that the administration of chelating agent D-penicillamine improves the protein and lipid contents in the muscle tissues compared to zinc exposed tissues. This result shows that D-penicillamine is the effective chelator of zinc in reducing the body burden of L. rohita fingerlings.     

Ultrasound irradiation based in-situ synthesis of star-like Tragacanth gum/zinc oxide nanoparticles on cotton fabric

Application of natural biopolymers for green and safe synthesis of zinc oxide nanoparticles on the textiles is a novel and interesting approach. The present study offers the use of natural biopolymer, Tragacanth gum, as the reducing, stabilizing and binding agent for in-situ synthesis of zinc oxide nanoparticles on the cotton fabric. Ultrasonic irradiation leads to clean and easy synthesis of zinc oxide nanoparticles in short-time at low-temperature. FESEM/EDX, XRD, FT-IR spectroscopy, DSC, photocatalytic activities and antimicrobial assay are used to characterize Tragacanth gum/zinc oxide nanoparticles coated cotton fabric. The analysis confirmed synthesis of star-like zinc oxide nanoparticles with hexagonal wurtzite structure on the cotton fabric with the average particle size of 62 nm. The finished cotton fabric showed a good photocatalytic activity on degradation of methylene blue and 100% antimicrobial properties with inhibition zone of 3.3 ± 0.1, 3.1 ± 0.1 and 3.0 ± 0.1 mm against Staphylococcus aureus, Escherichia coli and Candida albicans.     

Effects of ultrasound pretreatment with different frequencies and working modes on the enzymolysis and the structure characterization of rice protein

The effects of ultrasound pretreatment with different frequencies and working modes, including mono-frequency ultrasound (MFU), dual-frequency ultrasound (DFU) and tri-frequency ultrasound (TFU), on the degree of hydrolysis (DH) of rice protein (RP) and angiotensin-I-converting enzyme (ACE) inhibitory activity of RP hydrolysate were investigated. Ultraviolet–visible (UV) spectroscopy, fourier transform infrared (FTIR) spectroscopy, surface hydrophobicity and scanning electron microscopy (SEM) of RP pretreated with ultrasound were measured. The results showed that ultrasound pretreatment did not increase DH of RP significantly (p > 0.05). However, all the ultrasound pretreatment increased the ACE inhibitory activity of RP hydrolysate significantly (p < 0.05). The MFU of 20 kHz showed higher ACE inhibitory activity compared to that of other MFU. The ACE inhibitory activity of sequential DFU was higher than that of simultaneous with the same frequency combination. Sequential TFU of 20/35/50 kHz produced the highest increase in ACE inhibitory activity in contrast with other ultrasound frequencies and working modes. All the results under ultrasound pretreatment showed that ultrasound frequencies and working modes were of great effect on the ACE inhibitory activity of RP. The changes in UV–Vis spectra and surface hydrophobicity indicated the unfolding of protein and exposure of hydrophobic groups by ultrasound. The FTIR analysis showed that all the ultrasound pretreatment with different frequencies and working modes decreased α-helix, β-turn content and increased β-sheet, random coil content of RP. The SEM results indicated that ultrasound pretreatment resulted in the deformation of RP. In conclusion, the frequency selection of ultrasound pretreatment of RP is essential for the preparation of ACE inhibitory peptide.     

Studies on the effect of chlorides of magnesium,calcium, strontium and barium on the temperature of the sound velocity maximum of water

The effect of chlorides of magnesium, calcium, strontium and barium on the temperature of the sound velocity maximum (TSVM) of water, T_w, has been studied by determining the ultrasonic velocity using a single crystal variable path interferometer working at 3 MHz. The accuracy in ultrasonic velocity measurement is ± 0.05 m s^− 1. The ultrasonic velocity measurements were carried out at ≃ 2 °C intervals over a range of 5 °C to either side of TSVM of the solutions. The accuracy in fixing TSVM is ± 0.2 °C. The shifts in TSVM of water due to the addition of MgCl₂ and CaCl₂, (ΔT_obs), are found to be positive at low concentrations becoming maxima around the weight fraction w ≃ 2.3 × 10^− 2 for MgCl₂ and w ≃ 3.8 × 10^− 2 for CaCl₂ and becoming negative around w ≃ 5.6 × 10^− 2 for MgCl₂ and w ≃ 3.8 × 10^− 2 for CaCl₂. (ΔT_obs) for MgCl₂ > CaCl₂ > SrCl₂ > BaCl₂ indicating that the strength of the structural interactions in modifying the hydrogen-bonded structure of water is in the order Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺. The results are explained in the light of the structural properties of the anions and cations in the solutions in modifying the three dimensional hydrogen-bonded structure of water.     

Conductometric study of complex formations between some substituted pyrimidines and some metal ions in acetonitrile and the determination of thermodynamic parameters

The complexation reactions between Cr³⁺, Cd²⁺, Co²⁺, Ni²⁺, Hg²⁺, Zn²⁺, Pb²⁺,and Ag⁺ metal ions with diethyl-3-(4-hydroxy-6-methylpyrimidin-2-yl) guanidine (L1), 2-amino,4-hydroxy,6-methylpyrimidine (L2), and 2-(diethylamin),4-hydroxy,6-methylpyrimidine (L3) in acetonitrile (AN) were studied using a conductometric method. The formation constants of the resulting complexes were determined from computer fitting conductance-mole ratio data. The results revealed that the formation constants of L1 with metal ions are varying in order of Cr³⁺ > Pb²⁺ > Zn²⁺ > Co²⁺ > Hg²⁺ > Ag⁺ ~ Cd²⁺ > Ni²⁺. For L2 and L3 the sequence of complex formation constants are follow as Cr³⁺ > Pb²⁺ > Zn²⁺ > Co²⁺ > Cd²⁺ > Hg²⁺ > Ag⁺ > Ni²⁺ and Cr³⁺ > Pb²⁺ > Zn²⁺ > Co²⁺ > Ni²⁺ ~ Hg²⁺ ~ Cd²⁺ ~ Ag⁺, respectively. The values of the thermodynamic parameters (ΔH, ΔS and ΔG) for complexation reactions were obtained from the temperature dependence of the stability constants. In all cases, the complexes were found to be enthalpy stabilized but entropy destabilized. In addition, some ab-initio quantum-mechanical calculations were carried out, in order to obtain a clue about the degree tendency of ligands to metal ions.     

Ultrasound stimulus inducing change in hydrogen bonded crosslinking of aqueous polyvinyl alcohols

The effect of ultrasound (US) stimulation on the shear viscosity of aqueous polyvinyl alcohol (PVA) solution was studied when the solution was exposed to US at 23, 43, 96, and 141 kHz. The US stimulus showed a marked decrease of the shear viscosity of the solution in the order of 43 > 96 > 23 > 141 kHz, respectively, under US power dissipation of 8.5, 8.9, 8.9, and 8.8 W. Subsequently, when US exposure was stopped, the shear viscosity of PVA reverted to its original value. The US stimulation was analyzed with the US power transmitted through the PVA aqueous media. Furthermore, FT-IR spectra measured at different durations of US exposure, suggest that hydrogen bonds in the PVA segments were broken by the US exposure. We conclude that structural changes of the hydrogen bonded crosslinks of PVA were induced to include water molecules for the re-forming of crosslinks of aqueous PVA.     

Crystal structure and the structural disorder of ceria from 40 to 1497 °C

Nuclear-density distribution of ceria (CeO₂, space group: Fm3¯m) has been investigated between 40 and 1497 °C by the maximum-entropy method (MEM) and MEM-based pattern fitting combined with the Rietveld method using neutron powder diffraction data. The refined unit-cell and atomic displacement parameters increased with an increase of temperature. The results of the MEM analysis reveal that the oxide ions have a positional disorder spreading over a wide area and shift to the <111> directions from the ideal position 8c 1 / 4,1 / 4,1 / 4 of the fluorite-type structure. The disorder of the oxide ions is more significant at higher temperatures and suggests the diffusion paths in the <111> and <100> directions.     

Synthesis of nanocrystalline ZnO nanobelts via pyrolytic decomposition of zinc acetate nanobelts and their gas sensing behavior

The pyrolytic decomposition of layered basic zinc acetate (LBZA) nanobelts (NBs) into nanocrystalline ZnO NBs is investigated using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL). We also report on the gas sensing response of the resulting ZnO nanomaterial to CO. The LBZA NBs are grown at 65 °C in an aqueous solution of zinc acetate dihydrate. AFM and SEM results show as-grown products possess the characteristic layered structure of the LBZA crystals. XRD and XPS results show that annealing as-grown products at 210 °C in air causes a transformation from zinc acetate to nanocrystalline ZnO NBs via thermal decomposition. The ZnO crystalline domain size increases with temperature from 9.2 nm at 200 °C to 94 nm at 1000 °C, as measured from XRD. SEM shows evidence of sintering at 600 °C. The thickness of the NBs, determined via AFM, ranges from 10 to 50 nm and remains approximately constant with annealing temperature. XPS confirmed the chemical transformation from zinc acetate to ZnO and showed a significant remaining zinc hydroxide component for the ZnO NBs consistent with published results. PL measurements at room temperature show a blue shift in peak emission as the nanobelts change from LBZA to ZnO at 200 °C. Above this transition temperature, the ZnO nanobelts possess strong band edge emission at 390 nm and little broad band emission in the visible region. The AFM and SEM images reveal that the crystallites within the nanobelts orientate in rows along the long axis during annealing. This structure provides a high surface area to volume ratio of aligned nanoparticles which is beneficial for gas sensing applications. Gas sensors fabricated from 400 °C annealed nanobelts showed a response of 1.62 when exposed to 200 ppm of CO in dry air at 400 °C, as defined by the ratio of resistance before and during exposure. This indicates that ZnO nanostructures obtained by thermal decomposition of LBZA NBs could provide a cost effective route to high sensitivity gas sensors.     

Aqueous polymer–nitrate solution deposition of YBCO films

High critical current density YBa₂Cu₃O_7?x (YBCO) films were prepared by solution deposition of aqueous non-fluorine precursors. Non-fluorine polymer-assisted deposition (PAD) processes utilizing rheology modifiers and chelating agents were used to produce 50 nm films with a critical current density (J_c) over 3 MA/cm² and 400 nm films with J_c > 1 MA/cm²_. T_c measurements indicated that films have T_c values near 90 K. The total heat treatment time to produce these high performance films was less than 4 h. Rheology modifiers such as polyvinyl alcohol (PVA) and hydroxyethyl cellulose (HEC) were used to increase the thickness of deposited films independent of the solution cation concentration. Chelating agents such as polyethylene glycol (PEG) and sucrose increased the barium ion solubility. Nitrate crystallization during deposition was controlled through rapid drying with vacuum and coating with hot solutions.     

Adsorption of γ-mercaptopropyltrimethoxysilane on zinc: A study of the competition between thiol and silanol functions related to the age of the siloxane solution,its pH and the oxidation state of the surface

We describe the adsorption of γ–mercaptopropyltrimethoxysilane (γ-MPS) on zinc under various experimental conditions, including the age of the siloxane solution (t_ag), its pH (7 or 4), and the mode of preparation of the surface (RCA treatment or in situ polishing). It is shown by XPS studies that the structure of the adsorbed monolayer varies dramatically with the pH of the solution. At the natural pH of the siloxane solution (pH 7) where no hydrolysis of the SiOCH₃ group occurs, adsorption proceeds through the SH moiety and not through SiOCH₃ groups. This preferential attachment through SH is found whatever the age of the solution and the treatment of the zinc. It is confirmed by the fact that n-propyltrimethoxysilane (PSi) does not interact with the surface in the case of very old solutions (adsorption is not observed when Zn is polished in situ and only occurs with RCA zinc treatment for t_ag > 40 min). With siloxane solutions at pH 4, adsorption of γ-MPS is more complex and the structure of the adsorbed layer depends mainly on the age of the solution. With a fresh solution, hydrolysis is not very advanced and, as mentioned previously, adsorption occurs through the SH group. With older solutions and as a consequence of the progressive hydrolysis of the SiOCH₃ group to SiOH, the density of the grafted siloxane monolayer increases (6 min < t_ag < 10 min), followed by a mixed adsorption through SH and SiOH (10 min < t_ag < 40–50 min) revealed by the decrease in the normalised (Si2p/S2p)* intensity ratio. Finally, adsorption of dimers and oligomers is observed with still older siloxane solutions. In contrast to PSi whose adsorption on zinc is favoured by the RCA treatment, neither treatment of the surface changes the results significantly in the case of γ-MPS. Comparison with alkanethiols confirms the transition from monomer to dimer adsorption and IRRAS studies clearly indicate a condensation reaction between OH and SH groups.     

A theoretical study of CO adsorption on FeCo(100) and the effect of alloying

FeCo catalysts are modeled for optimizing the Fischer–Tropsch synthesis process since they can be tuned to enhance CO activity and resist poisoning. The electronic properties associated with CO adsorption are studied using plane-wave density functional theory (DFT). The range of computed adsorption energies from this work falls between the CO adsorption energies on pure Fe and Co surfaces. It was found that CO prefers to adsorb on the top site of the Co surface of FeCo alloys, whereas CO has stronger adsorption on pure Fe rather than pure Co surface. The trend in adsorption energy is top-Co > hollow-Fe > top-Fe > hollow-Co > bridge-Co > bridge-Fe. This change in preferable metal for adsorption (i.e., from Fe in a pure system to Co in the FeCo alloy surface in the current investigation) is due to the shift in the d-band center of the alloyed material. It implies that alloying Fe with Co changes the properties of the pure metal and ultimately affects the CO adsorption energy; however, the mechanism of adsorption remains similar and can be explained using the Nilsson–Pettersson model. Additional CO configurations consisting of hollow-site adsorption with a tilted geometry, was also investigated. The corresponding adsorption energy was found to be slightly higher than the adsorption energy when CO is adsorbed on the top-Co site.     

Oxidation of ultra-thin zinc films on Rh(100) surface

The oxidation of submonolayer zinc films on Rh(100) surface by O₂ gas has been studied using low-energy electron diffraction (LEED), Auger electron spectroscopy (AES), and scanning tunneling microscopy (STM). With a zinc coverage of 0.8 ML, an atomically flat ultra-thin zinc oxide film formed at an oxygen partial pressure of 2 × 10^? 8 mbar and a temperature of 150 °C. The zinc oxide film showed a c(16 × 2) LEED pattern. The high resolution STM image of the zinc oxide film showed single dotted spots and double dotted spots arranged linearly and periodically along the [01¯1] direction. We propose an atomic arrangement model of the film accounting for the LEED pattern, the STM image, and the atomic arrangement of the bulk ZnO(0001) surface.     

Infrared spectra of high coverage CO adsorption structures on Pt(111)

The adsorption of carbon monoxide on Pt(111) was studied using polarization modulation infrared reflection absorption spectroscopy (PM-IRAS) and sum frequency generation (SFG) spectroscopy. Two CO on-top signals at 2110 cm^? 1 and 2097 cm^? 1 have been detected under continuous CO exposure in a pressure range from 10^? 7 to 100 mbar and at temperatures between 200 K and 300 K. The formation of the higher wavenumber signal is found to be kinetically limited below 200 K and by the presence of a stable c(4 × 2) adlayer in UHV. On the basis of the results presented in this study and previous experimental findings the two on-top signals are related to different CO compression layers on Pt(111) with θ > 0.5, hexagonal Moiré lattices and rectangular coincident site lattices.     

Ultrasonic preparation of cationic cotton and its application in ultrasonic natural dyeing

Cationization of cotton fabric was conferred by the sonicator reaction of cellulose with bromoacetyl bromide, followed by substitution of the terminal bromo groups by triethylamine. Experiments showed that the optimal volume of bromoacetyl bromide necessary to succeed the first stage was 0.4 mL. The order of weight gain for various processes indicates, ultrasound, 25 kHz > ultrasound, 40 kHz > mechanical stirring. Also, for the second stage the order of nitrogen contents indicates ultrasound, 25 kHz > ultrasound, 40 kHz > mechanical stirring. The structures of both untreated and cationic fibres were investigated by FTIR spectroscopy. Modified cotton fabric was subsequently dyed in both conventional and ultrasonic techniques with isosalipurposide dye isolated from Acacia cyanophylla yellow flowers. The effect of dye bath pH, ultrasonic power and frequency, dyeing time and temperature were studied and the order of K/S values indicates ultrasound, 25 kHz > ultrasound, 40 kHz > CH. ultrasound was also found to enhance the dye uptake and the overall fastness properties. Analysis of the sorption isotherms of isosalipurposide dye on cationic cotton fabric shows that the Languimir isotherm equation is best able to correlate the data.     

Ultrasonic degradation of N-di and trihydroxy benzoyl chitosans and its effects on antioxidant activity

Modified chitosans with 3,4-dihydroxy benzoyl groups (CS-DHBA) and 3,4,5-trihydroxy benzoyl groups (CS-THBA) were synthesized and their chemical structures were determined by Fourier transform infrared (FT-IR) and ¹H nuclear magnetic resonance (¹H NMR) spectroscopy. Then, ultrasonic degradation of CS, CS-DHBA and CS-THBA in 1% acetic acid solution was investigated. The kinetics studies of degradation were followed by gel permeation chromatography (GPC). The results indicated that the weight-average molecular weight of chitosan decreased obviously after ultrasound treatment, but molecular weights of CS-DHBA and CS-THBA decreased slowly with increasing sonication time. Degradation kinetics model based on 1/M_t−1/M₀ = kt was used to estimate the degradation rate constant. It was found that the rates of degradation of CS-DHBA and CS-THBA are lower than CS, and follow the order: CS₄ > CS₈ > CS₁₂ > CS-THBA₄ > CS-THBA₈ ≈ CS-DHBA₄ > CS-THBA₁₂ > CS-DHBA₈ > CS-DHBA₁₂. The antioxidant activity of the CS, CS-DHBA and CS-THBA before and after sonication was investigated by the radical scavenging activity method using 1,1-diphenyl-2-picrylhydrazyl (DPPH). The DPPH scavenging free radical capacity of CS-THBA and CS-DHBA increased up to 89% and 74% respectively, when the concentration reached 6 μg/ml. The ultrasonic treatment of CS-DHBA and CS-THBA after 30 min decreased the DPPH free radical scavenging activity but ultrasonic treatment of CS increased the DPPH free radical scavenging activity.     

Magnetic resonance elastography of the pancreas: Measurement reproducibility and relationship with age

PurposeTo determine magnetic resonance elastography (MRE)-derived stiffness of pancreas in healthy volunteers with emphasis on: 1) short term and midterm repeatability; and 2) variance as a function of age.MethodsPancreatic MRE was performed on 22 healthy volunteers (age range:20–64 years) in a 3 T–scanner. For evaluation of reproducibility of stiffness estimates, the scans were repeated per volunteer on the same day (short term) and one month apart (midterm). MRE wave images were analyzed using 3D inversion to estimate the stiffness of overall pancreas and different anatomic regions (i.e., head, neck, body, and tail). Concordance and Spearman correlation tests were performed to determine reproducibility of stiffness measurements and relationship to age.ResultsA strong concordance correlation (ρ_c = 0.99; p-value < 0.001) was found between short term and midterm repeatability pancreatic stiffness measurements. Additionally, the pancreatic stiffness significantly increased with age with good Spearman correlation coefficient (all ρ > 0.81; p < 0.001). The older age group (> 45 yrs) had significantly higher stiffness compared to the younger group (≤ 45 yrs) (p < 0.001). No significant difference (p > 0.05) in stiffness measurements was observed between different anatomical regions of pancreas, except neck stiffness was slightly lower (p < 0.012) compared to head and overall pancreas at month 1.ConclusionMRE-derived pancreatic stiffness measurements are highly reproducible in the short and midterm and increase linearly with age in healthy volunteers. Further studies are needed to examine these effects in patients with various pancreatic diseases to understand potential clinical applications.     

In situ characterization of transport properties of superconducting (Cu, C)-system thin films

Transport properties of (Cu, C)Ba₂CuO_x [(Cu, C)-1201] thin films have been characterized by in situ temperature dependence of resistivity, without breaking vacuum from the deposition to the measurement. In in situ transport properties measurements, the obtained results reveal that (Cu, C)Ba₂CuO_x films exhibit T_c > 20 K on the cased of conductivity at 290 K (σ_[290 K]) > 4 × 10² S/cm and temperature coefficient of resistivity (TCR) > 1.5 × 10^?3 K^?1, and doping level of them should be in between under-doped and optimally-doped states. Their results suggest that there would be possible to further increases of T_c, and XPS data suggest that (Cu, C)-system should have the excellent dopability in their charge reservoir and the possibility of low anisotropy.     

Surface topography,nano-mechanics and secondary structure of wheat gluten pretreated by alternate dual-frequency ultrasound and the correlation to enzymolysis

The effects of alternate dual-frequency ultrasound (ADFU) pretreatment on the degree of hydrolysis (DH) of wheat gluten (WG) and angiotensin I-converting enzyme (ACE) inhibitory activity were investigated in this research. The surface topography, nano-mechanics and secondary structure of WG were also determined using atomic force microscope (AFM) and circular dichroism (CD). The correlations of ACE inhibitory activity and DH with surface topography, nano-mechanics and secondary structure of WG were determined using Pearson’s correlation analysis. The results showed that with an increase in either pretreatment duration or power, the ACE inhibitory activity of the hydrolysate also increases, reaching maximum at 10 min and 150 W/L, respectively, and then decreases thereafter. Similarly, AFM analysis showed that as the pretreatment duration or power increases, the surface roughness also increase and again a decrease occurs thereafter. As the pretreatment duration or power increased, the Young’s modulus and adhesion of WG also increased and then declined. Young’s modulus and adhesions average values were compared with ACE inhibitory activity reversely. The result of the CD spectra analysis exhibited losses in the relative percentage of α-helix of WG. Pearson’s correlation analysis showed that the average values of Young’s modulus and the relative percentage of α-helix correlated with ACE inhibitory activity of the hydrolysates linearly and significantly (P < 0.05); the relative percentage of β-sheet correlated linearly with DH of WG significantly (P < 0.05). In conclusion, ADFU pretreatment is an efficient method in proteolysis due to its physical and chemical effect on the Young’s modulus, α-helix and β-sheet of WG.     

Effect of structural disorder on magnetic frustrations in the Fe80Nb6B14 amorphous alloy

The paper presents measurements of magnetic frustrations for the Fe₈₀Nb₆B₁₄ amorphous alloy preliminary annealed for 1 h at temperatures ranging from 300 to 770 K in comparison with other parameters characterizing structural relaxation. It was shown that annealing out of free volume and internal stresses cause a reduction in number of frustrated states observed in the range 400>T>50 K. In the range 2<T<50 K additional frustrations due to iron clusters or nanograins were detected.     

Experimental study on the influence of low-frequency and low-intensity ultrasound on the permeability of the Mycobacterium smegmatis cytoderm and potentiation with levofloxacin

Tuberculosis is an infectious disease caused by the bacterium M. tuberculosis. The aim of this study was to investigate the bactericidal effect and underlying mechanisms of low-frequency and low-intensity ultrasound combined with levofloxacin treatment against M. smegmatis (a surrogate of M. tuberculosis). As part of this study, M. smegmatis was continuously irradiated with low frequency ultrasound (42 kHz) using several different doses whereby both intensity (0.138, 0.190 and 0.329 W/cm²) and exposure time (5, 15 and 20 min) were varied. Flow cytometric analyses revealed that the permeability of M. smegmatis increased following ultrasound exposure. The survival rate, structure and morphology of bacteria in the lower-dose (I_SATA = 0.138 W/cm² for 5 min) ultrasound group displayed no significant differences upon comparison with the untreated group. However, the survival rate of bacteria was significantly reduced and the bacterial structure was damaged in the higher-dose (I_SATA = 0.329 W/cm² for 20 min) ultrasound group. Ultrasound irradiation (0.138 W/cm²) was subsequently applied to M. smegmatis in combination with levofloxacin treatment for 5 min. The results demonstrated that the bactericidal effect of ultrasonic irradiation combined with levofloxacin is higher compared to ultrasound alone or levofloxacin alone.