Photocatalytic activity of nitrogen and copper doped TiO2 nanoparticles prepared by microwave-assisted sol-gel process

Cu and N-doped TiO₂ photocatalysts were synthesized from titanium (IV) isopropoxide via a microwave-assisted sol-gel method. The synthesized materials were characterized by X-ray diffraction, UV-vis diffuse reflectance, photoluminescence (PL) spectroscopy, SEM, TEM, FT-IR, Raman spectroscopy, photocurrent measurement technique, and nitrogen adsorption–desorption isotherms. Raman spectra and XRD showed an anatase phase structure. The SEM and TEM images revealed the formation of an almost spheroid mono disperse TiO₂ with particle sizes in the range of 9-17 nm. Analysis of N₂ isotherm measurements showed that all investigated TiO₂ samples have mesoporous structures with high surface areas. The optical absorption edge for the doped TiO₂ was significantly shifted to the visible light region. The photocurrent and photocatalytic activity of pure and doped TiO₂ were evaluated with the degradation of methyl orange (MO) and methylene blue (MB) solution under both UV and visible light illumination. The doped TiO₂ nanoparticles exhibit higher catalytic activity under each of visible light and UV irradiation in contrast to pure TiO₂. The photocatalytic activity and photocurrent ability of TiO₂ have been enhanced by doping of the titania in the following order: (Cu, N) - codoped TiO₂ > N-doped TiO₂ > Cu-doped TiO₂ > TiO₂. COD result for (Cu, N)-codoped TiO₂ reveals ∼92% mineralization of the MO dye on six h of visible light irradiation.     

Doping level effect on visible-light irradiation W-doped TiO2–anatase photocatalysts for Congo red photodegradation

A series of W-modified TiO₂ (W–TiO₂) photocatalysts were synthesized by a simple sol–gel method. The new photocatalysts were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV–vis-diffuse reflectance spectroscopy (DRS), and Brunauer, Emmett and Teller (BET) surface area analyzer. The photoactivity of the W–TiO₂ photocatalysts was evaluated by the photocatalytic oxidation of Congo red (CR) dye. It was found that the average size of the prepared photocatalysts is 10 nm. Moreover, they have high surface areas (∼ 216 m² g⁻¹) and their light-absorption extends to the visible region compared to pure TiO₂. The effects of W-loading and of the calcination temperature of the prepared photocatalysts on their photocatalytic activity were also studied. The obtained results show that the W_0.5–TiO₂ photocatalyst calcined at 350 °C is much highly photoactive than non-doped or highly doped TiO₂. The enhanced photocatalytic activity of the weakly doped TiO₂ may be attributed to the increase in the charge separation efficiency and the presence of surface acidity on the W_0.5–TiO₂ photocatalyst.     

Proton-conducting membranes based on poly(2,5-benzimidazole) (ABPBI) and phosphoric acid prepared by direct acid casting

We report the preparation of phosphoric acid doped poly(2,5-benzimidazole) (ABPBI) membranes for PEMFC by simultaneously doping and casting from a poly(2,5-benzimidazole)/phosphoric acid/methanesulfonic acid (MSA) solution. The evaporation of MSA yields a very homogeneous membrane having a better controlled composition, avoiding the use of solvent-intensive procedures. Membranes have been prepared with contents of up to 3.0H₃PO₄ molecules per ABPBI repeating unit. These membranes achieve a maximum conductivity of 1.5 × 10⁻² S cm⁻¹ at temperatures as high as 180 °C in dry conditions. These ABPBI membranes are more conveniently prepared than those conventionally formed and doped in separate steps while featuring comparable conductivities (ABPBI × 2.7H₃PO₄ prepared by the soaking method showed a conductivity of 2.5 × 10⁻² S cm⁻¹ at 180 °C in dry conditions).     

Water affinity and permeability in membranes of alginate-Ca2+ containing poly(n-isopropylacrylamide)

Hydrogels based on semi-interpenetrating network (semi-IPN) combining alginate-Ca²⁺ (matrix) with poly(N-isopropyl acrylamide) (PNIPAAm) were prepared and characterized in order to determine their affinity to water and their permeability to orange II as a function of temperature. Membranes of these hydrogels were obtained by gelation of the aqueous solution of alginate and PNIPAAm by the addition of CaCl₂. The presence of PNIPAAm chains inside the hydrogels alters the water affinity when compared to the pure alginate-Ca²⁺ hydrogels. Although the water uptake capability decreases above 32 °C (Low Critical Solution Temperature (LCST) of PNIPAAm in water), no shrinking of the semi-IPN hydrogels during the phase separation of the PNIPAAm was observed. The permeability of orange II as a function of temperature decreases at 32 °C and shows a dependence on the molar mass of the alginate. The partition coefficient of orange II in the hydrogel membrane, relative to water, decreases by increasing the temperature and its permeability follows a similar behavior. It was proposed that above the LCST of PNIPAAm the Alginate-Ca²⁺ networks mechanically support the collapsed PNIPAAm chains and the diffusion of orange II is minimized. The collapsing process may be followed by the formation of a complex between the carboxylic side groups of alginate and –NH–R groups of PNIPAAm. It would expose the isopropyl groups of PNIPAAm chains, providing a hydrophobic environment that minimizes the interaction between the dye and the polymeric matrix.     

The improved photocatalytic properties of P-type NiO loaded porous TiO2 sheets prepared via freeze tape-casting

For the interest of the practical application, porous TiO₂ sheets were prepared by a novel freeze tape-casting method, in order to improve the photocatalytic activities of these TiO₂ sheets, p-type NiO was loaded by chemical solution deposition. The samples were characterized by a series of physical means, including XRD, SEM, EDS, XPS, ICP-OES, and UV-vis spectroscopy. The photocatalytic activities of the samples were evaluated by the degradation of methyl orange solution. The results showed that the photocatalytic activity of the TiO₂ sheet was greatly enhanced by the NiO loading, and the photocatalytic efficiency increased with increasing the NiO loading, the extraordinary performance for the NiO-loaded sample with 0.1 M precursor dipped was related to its unique morphology. The sample annealed at 600 °C showed the better photocatalytic activity than the sample annealed at 400 °C and 800 °C. The improvement of the photocatalytic activity was attributed to the formation of p–n junctures at the interface of the NiO/TiO₂, which facilitates the photoinduced electron/hole pairs' separation by the inner electric field, thus leading to the higher photocatalytic activities for the NiO-loaded TiO₂ sheets.     

Modification of photocatalytic TiO2 thin films by electron beam irradiation

Noble metal-modified TiO₂ films were prepared by electron beam deposition of Pt, Pd, Au and Ag on the surface of TiO₂ films with diameters ranging from <1 nm to 500 nm. The morphology of the films was characterized by X-ray diffractometry (XRD), field emission scanning electron microscope (FMSEM) and transmission electron microscope (TEM). The photocatalytic capability of the films were tested and compared by degradation of methyl orange (MO) in aqueous solutions under both UV and visible light illumination.     

Microwave-assisted synthesis of multimetal oxygen-evolving catalysts

Oxygen evolution reaction (OER) plays a pivotal role in water-splitting. Here, we report a facile method to synthesize multimetal supported on commercial carbon black via a time-saving microwave process. Crystalline FeNi₃ nanoparticles homogeneously doped with Mo are formed via a microwave treatment and activated to metal oxyhydroxide in-situ during cyclic voltammetry test with overpotential of only 280 mV at 10 mA cm^− 2 for OER in alkaline electrolyte, outperforming RuO₂. Our synthesis methodology is a promising alternative for large-scale production, delivering a valuable contribution to catalyst preparation and electrocatalytic water oxidation research.     

A porous polymer electrolyte based on P(VDF-HFP) prepared by a simple phase separation process

A polymer electrolyte with interconnected pores based on poly(vinylidene difluoride-co-hexafluoropropylene) [P(VDF-HFP)] copolymer was prepared by a simple phase separation process using water as both non-solvent and pore inducer. The prepared porous membrane was characterized by SEM, XRD and DSC. With a narrow pore size distribution and low crystallinity, the resulting polymer electrolyte shows a high ionic conductivity up to 1.76 × 10⁻³ S cm⁻¹ at room temperature and exhibits low apparent activation energy of 10.35 kJ mol⁻¹ for the transportation of ions. Its low cost and environmentally friendliness provide great promise for the practical application in polymer lithium-ion batteries.     

Nickel ferrite/zinc oxide nanocomposite: Investigating the photocatalytic and antibacterial properties

A facile strategy was used for the synthesis of nickel ferrite/zinc oxide (NiFe₂O_4/ZnO) nanocomposite via an ultra-sonication method and observed its recyclability and photostability with enhanced visible light-driven photocatalytic performance. The photo degradation activities of as-synthesized photocatalysts were investigated using various dyes including methylene blue, crystal violet and methyl orange under solar light irradiation. Prepared material degrades 49.2% methyl orange, 44.4% methyl blue and 41.3% crystal violet in 40 min. Further, the synergistic effect of nickel ferrite and zinc oxide can reduce the probability of recombination of charge carrier and boost the charge separation which leads to remarkable photocatalytic performance. Magnetic properties of nickel ferrite reduces the agglomeration of material and increases the recyclability. The NiFe₂O_4/ZnO nanocomposites also exhibited better antibacterial activity for Pseudomonas aeruginosa and Staphylococcus aureus, which shows that they can be used for both environmental and biological applications.     

Ionization of methyl orange in aqueous sodium chloride solutions

Ionization constants of sodium 4′-dimethylaminoazobenzene-4-sulphonate (methyl orange) were determined by means of spectrophotometric measurements in water and in aqueous sodium chloride solutions with molalities up to 2 mol·kg⁻¹ at temperatures between 278.15 K and 333.15 K. The temperature dependence of the thermodynamic acidity constant shows a slight curvature in accordance with published data. The influence of sodium chloride on the methyl orange deprotonation was assessed by the measurement of stoichiometric acidity constants in this ionic medium. The Pitzer theory, widely used in the evaluation of the excess free energy of non-ideal electrolyte solutions, was applied to the computation of the activity coefficients of the chemical species involved in the equilibria and a good fit of those equations to the experimental data was observed, at all temperatures under consideration.     

Synthesis of V5+‐doped Ag/AgCl photocatalysts with enhanced visible light photocatalytic activity

V⁵⁺‐doped Ag/AgCl photocatalysts were prepared via the ion exchange method. The catalysts were characterized using X‐ray diffractometry, transmission electron microscopy, and energy‐dispersive X‐ray, X‐ray photoelectron, Fourier transform infrared and ultraviolet–visible spectroscopies. The V⁵⁺‐doped Ag/AgCl photocatalysts show much higher photocatalytic activities than Ag/AgCl under visible light irradiation for methyl orange (MO) decomposition. Especially, the 2.0 wt% V⁵⁺‐doped Ag/AgCl photocatalyst shows the highest photocatalytic activity and also high stability after five cycles. The MO degradation rate during each cycle is almost maintained at 97%. Electron spin resonance spectroscopy and radical trapping experiments reveal that holes play an important role in the photocatalytic process.     

Role of core diameter and silica content in photocatalytic activity of TiO2/SiO2/Fe3O4 composite

Magnetically separable TiO₂/SiO₂/Fe₃O₄ composites of different core (Fe₃O₄) diameters and silica contents have been prepared by sol–gel technique for both silica and titania coatings. Energy dispersive X-ray fluorescence (EDX), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), BET surface area analysis and scanning electron microscope (SEM) have been used for characterization of prepared samples. Photocatalytic activity of the prepared samples has been investigated by photodegradation of methyl orange. Obtained results have shown that 25–45 μm core diameter exhibits the maximum activity since it possesses a convenient surface area and light transmittance. Silica content has a significant effect on the activity of composite. Silica content of more than 10 wt% has reduced the catalyst activity because of the increase in particle diameter and reduction of surface area.     

A novel process to prepare porous membranes comprising SnO2 nanoparticles and P(MMA-AN) as polymer electrolyte

We have successfully developed a new process to prepare porous poly(methyl methacrylate-co-acrylonitrile) (P(MMA-AN)) copolymer based gel electrolyte. The porous structure in the polymer matrix is achieved by adding SnO₂ nanoparticles which are mostly used as gas sensor materials. The quasi-aromatic solvent, NMP, has an electron-repulsion effect with the space charge layer on the surface of SnO₂ nanoparticles and forms a special gas–liquid phase interface. Once the cast polymer solution is stored at an elevated temperature to evaporate the solvent, gas–liquid phase separation happens and spherical pores are obtained. The ionic conductivity at room temperature of the prepared gel polymer electrolyte based on the porous membrane is as high as 1.54 × 10⁻³ S cm⁻¹ with the electrochemical stability up to 5.10 V (vs. Li/Li⁺). This method presents another promising way to prepare porous polymer electrolyte for practical use.     

Pervaporation separation of aromatic/aliphatic hydrocarbons by crosslinked poly(methyl acrylate-co-acrylic acid) membranes

Copolymers of methyl acrylate and acrylic acid were synthesized to fabricate membranes ionically crosslinked using aluminum acetylacetonate for the separation of toluene/i-octane mixtures by pervaporation at high temperatures. The formation of the ionic crosslinking via bare aluminum cations was characterized by UV–VIS spectroscopy and solubility tests. Reproducibility and the reliability of the methodology for membrane formation and crosslinking were confirmed. The effects of acrylic acid content, crosslinking conditions, pervaporation temperature, and feed composition on the normalized flux and the selectivity for toluene/i-octane mixtures were determined. A typical crosslinked membrane showed a normalized flux of 26 kg μm m⁻² h⁻¹ and a selectivity of 13 for a 50/50 wt.% feed mixture at 100°C. The pervaporation properties including solubility selectivity and diffusivity selectivity are discussed in terms of swelling behavior. The performance of the current membranes were benchmarked against other membrane materials reported in the literature.     

Synthesis and characterization of highly-active nickel and lanthanum co-doped SrTiO3

A series of highly-active nickel and lanthanum co-doped SrTiO₃ photocatalysts were synthesized via sol–gel process and their photocatalytic activities were evaluated by degradation of methylene blue (MB). The obtained samples were found by XRD, XPS and UV–vis to have a perovskite structure in which Ni and La atoms were incorporated into SrTiO₃. After Ni and La doped into SrTiO₃, the absorption edge of SrTiO₃ powder was greatly shifted from 380 nm to 700 nm. Under a 100 W incandescent lamp irradiating for 14 h, a 100% of MB was degraded, which is much higher than those of pure SrTiO₃ and commercial Degussa P25. The optimal range of Ni and La dopants is 0.1–1.0 mol%. The formation of a new absorption edge and the large surface area may be the main reasons for the high activity.     

A study of scandia and rhenium doped tungsten matrix dispenser cathode

Scandia and rhenium doped tungsten powders were prepared by solid–liquid doping combined with two-step reduction method. The experimental results show that scandia was distributed evenly on the surface of tungsten particles. The addition of scandia and rhenium could decrease the particle size of doped tungsten, for example, the tungsten powders doped with Sc₂O₃ and Re had the average size of about 50 nm in diameter. By using this kind of powder, scandia and rhenium doped tungsten matrix with the sub-micrometer sized tungsten grains was obtained. This kind of matrix exhibited good anti-bombardment insensitivity at high temperature. The emission property result showed that high space charge limited current densities of more than 60 A/cm² at 900 °C could be obtained for this cathode. A Ba–Sc–O multilayer about 100 nm in thickness formed at the surface of cathode after activation led to the high emission property.     

Surface plasmon resonance biosensor based on Au nanoparticle in titania sol–gel membrane

A novel surface plasmon resonance (SPR) biosensor for the determination of human IgG was introduced. The biosensor was prepared with three layers of titania sol–gel membrane by vapor deposition. The colloid Au nanoparticle (AuNP) was immobilized in the second layer of titania membrane and the AuNP coupled with rabbit anti-human IgG was encapsulated in the third layer. The AuNP in the second layer of titania membrane was proved to be effective in the sensitivity enhancement of SPR biosensor. The lowest concentration that could be detected obtained by the biosensor with AuNP is about eight times lower than that obtained without AuNP. In addition, the titania sol–gel is a porous homogeneous material that permits analytes to access the encapsulated biomolecule and can provide a controlled environment for the study of biomolecular recognition. The titania sol–gel was also confirmed to be benefit for biomolecule to keep bioactivity, which could offer a good waterish microenvironment. As a result, the modified biosensor exhibits a satisfactory response for human IgG in the concentration range of 0.30–40.00 μg mL^?1 and shows favorable bioactivity for a long time.     

A novel nitrogen-doped graphene fiber microelectrode with ultrahigh sensitivity for the detection of dopamine

A novel nitrogen doped graphene fiber (NGF) was fabricated via a simple and facile wet-spinning strategy followed by annealing at high temperature, which can be applied as a remarkable electrode material. The NGF microelectrode shows good sensitivity and selectivity for the detection of dopamine with a wide linear response in the range of 0.1 μM to 80 μM, with the detection limit of 30 nM and an ultrahigh sensitivity of 22.08 μA μM^− 1 cm^− 2. Such high performance enables the NGF to be a prominent material in the branch of electrochemical analysis.     

Demonstration of a novel,flexible, photocatalytic oxygen-scavenging polymer film

The preparation of a novel, flexible, photocatalytic, oxygen-scavenging polymer film is described. The film incorporates nanocrystalline titania particles in an ethyl cellulose polymer film, with or without an added sacrificial electron donor of triethanolamine. When coated on the inside of a glass vessel its UV-driven light-scavenging action is demonstrated by platinum octaethyl porphyrin coated glass beads sealed inside, since their luminescence increases with increasing UV-irradiation time. When used as a flexible film, work with an oxygen electrode shows that the film is able to scavenge oxygen at an average rate of 0.017 cm³ O₂ h⁻¹ cm⁻² over a 24 h period, which compares favourably to other, well-established oxygen-scavenger systems. The potential of using such as system for oxygen scavenging in packaging is discussed briefly.     

Gold nanoparticles decorated carbon fiber mat as a novel sensing platform for sensitive detection of Hg(II)

The three-dimensional fibril-like carbon fiber mat electrode (CFME) decorated with Au nanoparticles (AuNPs) was employed to construct Hg(II) sensing platform for the first time. The highly porous feature of CFME combining the high affinity of AuNPs for mercury endowed the sensing platform with high sensitivity and good reproducibility. Under optimal conditions, the prepared AuNPs/CFME was capable of sensing Hg(II) with a detection limit of 0.1 μg L^− 1 (S/N = 3) using differential pulse anodic stripping voltammetry (DPASV). Finally, the AuNPs/CFME was successfully demonstrated for the determination of Hg(II) in real water samples with satisfactory results.